arXiv subjects

Kazuma Ikeda

Publications and source records attributed to Kazuma Ikeda.

8 recordsLinked to original sources

arXiv2026

Towards Real-Time Full-Waveform LiDAR Transformers via Intensity-Guided Token Reduction and Physics-Aware Augmentation

LiDAR is a critical sensor for autonomous driving and robotics, yet it remains vulnerable to adverse conditions such as fog, rain, transparent objects, and low-reflectance surfaces. Full-waveform LiDAR (FWL) addresses these limitations by capturing the complete return waveform as a histogram, preserving rich reflection characteristics including multi-path echoes and weak signals. While recent Transformer-based approaches have demonstrated promise on FWL data, two fundamental bottlenecks remain: high computational cost from redundant tokens in low-intensity background regions, and limited generalization due to scarce annotated training data. We address both bottlenecks by exploiting the physical structure inherent to FWL data. First, we propose FWL-ToPM, a token pruning and merging mechanism that leverages intensity distributions to selectively reduce tokens while retaining critical waveform content. Second, we introduce FWLAug, a data augmentation framework designed as a regularization method that preserves waveform structure, retaining the Time-of-Flight waveform of each ray and the frustum geometry, to improve generalization to unseen scenes. Evaluated on the Ghost-FWL benchmark, FWL-ToPM achieves over 8 times speedup at real-time throughput alongside a nearly 9-point F1 gain over the prior state of the art, establishing the first real-time FWL Transformer that simultaneously improves accuracy. FWLAug further improves performance on both the standard benchmark and an out-of-distribution test set of unseen scenes. Together, these methods push FWL-based perception toward practical deployment. The code and the OOD dataset are publicly available and can be accessed via the project page: https://keio-csg.github.io/FWL-ToPM

cs.CV↗

arXiv2026

Plasmoid Instability in Inhomogeneous Current Sheets

Plasmoid instability in inhomogeneous current sheets is investigated using electromagnetic gyrokinetic simulations of collisionless magnetic reconnection. Simulations with and without small random perturbations are compared to examine the effects of symmetry breaking and spatial inhomogeneity. The current-sheet width immediately before disruption remains close to the electron skin depth, whereas the disruption aspect ratio varies significantly between primary and later current sheets. Random perturbations also produce asymmetric plasmoid topologies in which neighboring X points no longer share a common separatrix. These results suggest that spatial inhomogeneity is an important factor in the disruption of dynamically evolving current sheets.

physics.plasm-ph↗

arXiv2026

A Secure dToF LiDAR SoC with Dual-Domain Fingerprinting and Event-Driven AFE Circuit Achieving Sensor-Level Attack Resilience

Recent studies have shown that most commercial direct time-of-flight (dToF) LiDARs can be spoofed by injecting high-frequency laser pulses into the receiver, which can erase pedestrians from the point cloud. This paper presents the first dToF LiDAR system-on-chip (SoC) with integrated sensor-level hardware security against spoofing attacks. We propose Dual-Domain Fingerprinting (DDF), which emits laser pulse pairs whose time interval and amplitude ratio are both randomized and authenticates received echoes in this two-dimensional space, so that spoofed signals are rejected before they corrupt the ranging result. An Event-Driven AFE (ED-AFE) activates the ADC only around pulse peaks: it digitizes three samples around each peak with a triggered ADC at 1-GHz sampling and applies parabolic interpolation, achieving 1-cm distance resolution with a 99% reduction in ADC power. A time-modulated laser driver controls the laser amplitude from 10% to 100% by modulating the charge time of a laser capacitor, providing the microsecond-order amplitude modulation required by DDF. A LiDAR system with a 16-channel 65-nm CMOS prototype SoC demonstrates up to 120-m ranging and an AFE power of 3.1 mW per channel, 60% lower than prior art. In a proof-of-concept experiment in which the dual-domain authentication is applied to measured sensor data, 73% of the point cloud is protected under spoofing attack, compared with 0% without DDF.

cs.CR↗

arXiv2026

Ghost-FWL: A Large-Scale Full-Waveform LiDAR Dataset for Ghost Detection and Removal

LiDAR has become an essential sensing modality in autonomous driving, robotics, and smart-city applications. However, ghost points (or ghosts), which are false reflections caused by multi-path laser returns from glass and reflective surfaces, severely degrade 3D mapping and localization accuracy. Prior ghost removal relies on geometric consistency in dense point clouds, failing on mobile LiDAR's sparse, dynamic data. We address this by exploiting full-waveform LiDAR (FWL), which captures complete temporal intensity profiles rather than just peak distances, providing crucial cues for distinguishing ghosts from genuine reflections in mobile scenarios. As this is a new task, we present Ghost-FWL, the first and largest annotated mobile FWL dataset for ghost detection and removal. Ghost-FWL comprises 24K frames across 10 diverse scenes with 7.5 billion peak-level annotations, which is 100x larger than existing annotated FWL datasets. Benefiting from this large-scale dataset, we establish a FWL-based baseline model for ghost detection and propose FWL-MAE, a masked autoencoder for efficient self-supervised representation learning on FWL data. Experiments show that our baseline outperforms existing methods in ghost removal accuracy, and our ghost removal further enhances downstream tasks such as LiDAR-based SLAM (66% trajectory error reduction) and 3D object detection (50x false positive reduction). The dataset and code is publicly available and can be accessed via the project page: https://keio-csg.github.io/Ghost-FWL

cs.CV↗

arXiv2026

MirrorDrift: Actuated Mirror-Based Attacks on LiDAR SLAM

LiDAR SLAM provides high-accuracy localization but is fragile to point-cloud corruption because scan matching assumes geometric consistency. Prior physical attacks on LiDAR SLAM largely rely on LiDAR spoofing via external signal injection, which requires sensor-specific timing knowledge and is increasingly mitigated by modern defense mechanisms such as timing obfuscation and injection rejection. In this work, we show that specular reflection offers an injection-free alternative and demonstrate an attack, MirrorDrift, that uses an actuated planar mirror to cause ghost points in LiDAR scans and systematically bias scan-matching correspondences. MirrorDrift optimizes mirror placement, alignment, and actuation. In simulation, it increases the average pose error (APE) by 6.1x over random placement, degrading three SLAM systems to 2.29-3.31 m mean APE. In real-world experiments on a modern LiDAR with state-of-the-art interference mitigation, it induces localization errors of up to 6.03 m. To the best of our knowledge, this is the first successful SLAM-targeted attack against production-grade secure LiDARs.

cs.RO↗

arXiv2026

D-SLAMSpoof: An Environment-Agnostic LiDAR Spoofing Attack using Dynamic Point Cloud Injection

In this work, we introduce Dynamic SLAMSpoof (D-SLAMSpoof), a novel attack that compromises LiDAR SLAM even in feature-rich environments. The attack leverages LiDAR spoofing, which injects spurious measurements into LiDAR scans through external laser interference. By designing both spatial injection shapes and temporally coordinated dynamic injection patterns guided by scan-matching principles, D-SLAMSpoof significantly improves attack success rates in real-world, feature-rich environments such as urban areas and indoor spaces, where conventional LiDAR spoofing methods often fail. Furthermore, we propose a practical defense method, ISD-SLAM, that relies solely on inertial dead reckoning signals commonly available in autonomous systems. We demonstrate that ISD-SLAM accurately detects LiDAR spoofing attacks, including D-SLAMSpoof, and effectively mitigates the resulting position drift. Our findings expose inherent vulnerabilities in LiDAR-based SLAM and introduce the first practical defense against LiDAR-based SLAM spoofing using only standard onboard sensors, providing critical insights for improving the security and reliability of autonomous systems.

cs.RO↗

arXiv2025

BasketLiDAR: The First LiDAR-Camera Multimodal Dataset for Professional Basketball MOT

Real-time 3D trajectory player tracking in sports plays a crucial role in tactical analysis, performance evaluation, and enhancing spectator experience. Traditional systems rely on multi-camera setups, but are constrained by the inherently two-dimensional nature of video data and the need for complex 3D reconstruction processing, making real-time analysis challenging. Basketball, in particular, represents one of the most difficult scenarios in the MOT field, as ten players move rapidly and complexly within a confined court space, with frequent occlusions caused by intense physical contact. To address these challenges, this paper constructs BasketLiDAR, the first multimodal dataset in the sports MOT field that combines LiDAR point clouds with synchronized multi-view camera footage in a professional basketball environment, and proposes a novel MOT framework that simultaneously achieves improved tracking accuracy and reduced computational cost. The BasketLiDAR dataset contains a total of 4,445 frames and 3,105 player IDs, with fully synchronized IDs between three LiDAR sensors and three multi-view cameras. We recorded 5-on-5 and 3-on-3 game data from actual professional basketball players, providing complete 3D positional information and ID annotations for each player. Based on this dataset, we developed a novel MOT algorithm that leverages LiDAR's high-precision 3D spatial information. The proposed method consists of a real-time tracking pipeline using LiDAR alone and a multimodal tracking pipeline that fuses LiDAR and camera data. Experimental results demonstrate that our approach achieves real-time operation, which was difficult with conventional camera-only methods, while achieving superior tracking performance even under occlusion conditions. The dataset is available upon request at: https://sites.google.com/keio.jp/keio-csg/projects/basket-lidar

cs.CV↗

arXiv2025

SLAMSpoof: Practical LiDAR Spoofing Attacks on Localization Systems Guided by Scan Matching Vulnerability Analysis

Accurate localization is essential for enabling modern full self-driving services. These services heavily rely on map-based traffic information to reduce uncertainties in recognizing lane shapes, traffic light locations, and traffic signs. Achieving this level of reliance on map information requires centimeter-level localization accuracy, which is currently only achievable with LiDAR sensors. However, LiDAR is known to be vulnerable to spoofing attacks that emit malicious lasers against LiDAR to overwrite its measurements. Once localization is compromised, the attack could lead the victim off roads or make them ignore traffic lights. Motivated by these serious safety implications, we design SLAMSpoof, the first practical LiDAR spoofing attack on localization systems for self-driving to assess the actual attack significance on autonomous vehicles. SLAMSpoof can effectively find the effective attack location based on our scan matching vulnerability score (SMVS), a point-wise metric representing the potential vulnerability to spoofing attacks. To evaluate the effectiveness of the attack, we conduct real-world experiments on ground vehicles and confirm its high capability in real-world scenarios, inducing position errors of $\geq$4.2 meters (more than typical lane width) for all 3 popular LiDAR-based localization algorithms. We finally discuss the potential countermeasures of this attack. Code is available at https://github.com/Keio-CSG/slamspoof

cs.RO↗