arXiv subjects

Kapil Khandelwal

Publications and source records attributed to Kapil Khandelwal.

8 recordsLinked to original sources

arXiv2026

Trigger Timing, Deadline Readiness, and Event-Aligned Accounting for Dynamic Ad Insertion

Dynamic ad insertion comparisons can conflate trigger, reach, readiness, playback, billability and measurement even when the accounting is arithmetically correct. We separate these events with an observed-event ledger, a candidate-invariant reference deadline and pod-level contribution accounting. The deadline rule is fixed before candidate assignment and tests whether an admissible transition state remains valid, not whether preparation merely finished earlier. A restricted monotone-playback representation states when media-position summaries suffice; a counterexample shows why they fail over a wider path class. An offline synthetic study exercises the definitions over nine short-lifetime conditions informative for the readiness comparison and nine long-lifetime conditions serving as analytic controls. Across 45,000 shared scripts, two trigger policies share imposed playback paths, latency draws and hypothetical value and cost coefficients. Playhead summaries substantially misclassify reach events in the nonmonotone mixtures, yet neither shortcut reverses the contribution contrast in this grid, because some errors cancel under the shared design. Replacing validity at the deadline with completion by the deadline reverses the comparison in three of the nine informative conditions, all at one of the three latency settings. Scoring readiness at actual viewer arrival rather than at the reference deadline shifts pause-path readiness but changes no contribution sign. These outcomes are consequences of the event definitions applied to established misclassification mechanisms. Conservative bounds retain uncertainty when records are missing, and the artifact records code, seeds, event histories and checking procedures. The evidence is synthetic, uses no commercial telemetry, and ranks neither server-side nor server-guided insertion.

cs.MM↗

arXiv2025

Structural Symmetry, Multiplicity, and Differentiability of Eigenfrequencies

This work investigates the multiplicity and differentiability of eigenfrequencies in structures with various symmetries. In particular, the study explores how the geometric and design variable symmetries affect the distribution of eigenvalues, distinguishing between simple and multiple eigenvalues in 3-D trusses. Moreover, this article also examines the differentiability of multiple eigenvalues under various symmetry conditions, which is crucial for gradient-based optimization. The results presented in this study show that while full symmetry ensures the differentiability of all eigenvalues, increased symmetry in optimized design, such as accidental symmetry, may lead to non-differentiable eigenvalues. Additionally, the study presents solutions using symmetric functions, demonstrating their effectiveness in ensuring differentiability in scenarios where multiple eigenvalues are non-differentiable. The study also highlights a critical insight into the differentiability criterion of symmetric functions, i.e., the completeness of eigen-clusters, which is necessary to ensure the differentiability of such functions.

cs.CE↗

arXiv2025

Finite Strain Robust Topology Optimization Considering Multiple Uncertainties

This paper presents a computational framework for the robust stiffness design of hyperelastic structures at finite deformations subject to various uncertain sources. In particular, the loading, material properties, and geometry uncertainties are incorporated within the topology optimization framework and are modeled by random vectors or random fields. A stochastic perturbation method is adopted to quantify uncertainties, and analytical adjoint sensitivities are derived for efficient gradient-based optimization. Moreover, the mesh distortion of low-density elements under finite deformations is handled by an adaptive linear energy interpolation scheme. The proposed robust topology optimization framework is applied to several examples, and the effects of different uncertain sources on the optimized topologies are systematically investigated. As demonstrated, robust designs are less sensitive to the variation of target uncertain sources than deterministic designs. Finally, it is shown that incorporating symmetry-breaking uncertainties in the topology optimization framework promotes stable designs compared to the deterministic counterpart, where -- when no stability constraint is included -- can lead to unstable designs.

cs.CE↗

arXiv2025

A cluster mean approach for topology optimization of natural frequencies and bandgaps with simple/multiple eigenfrequencies

This study presents a novel approach utilizing cluster means to address the non-differentiability issue arising from multiple eigenvalues in eigenfrequency and bandgap optimization. By constructing symmetric functions of repeated eigenvalues -- including cluster mean, p-norm and KS functions -- the study confirms their differentiability when all repeated eigenvalues are included, i.e., clusters are complete. Numerical sensitivity analyses indicate that, under some symmetry conditions, multiple eigenvalues may also be differentiable w.r.t the symmetric design variables. Notably, regardless of enforced symmetry, the cluster mean approach guarantees differentiability of multiple eigenvalues, offering a reliable solution strategy in eigenfrequency topology optimization. Optimization schemes are proposed to maximize eigenfrequencies and bandgaps by integrating cluster means with the bound formulations. The efficacy of the proposed method is demonstrated through numerical examples on 2D and 3D solids and plate structures. All optimization results demonstrate smooth convergence under simple/multiple eigenvalues.

cs.CE↗

arXiv2023

Finite Strain Topology Optimization with Nonlinear Stability Constraints

This paper proposes a computational framework for the design optimization of stable structures under large deformations by incorporating nonlinear buckling constraints. A novel strategy for suppressing spurious buckling modes related to low-density elements is proposed. The strategy depends on constructing a pseudo-mass matrix that assigns small pseudo masses for DOFs surrounded by only low-density elements and degenerates to an identity matrix for the solid region. A novel optimization procedure is developed that can handle both simple and multiple eigenvalues wherein consistent sensitivities of simple eigenvalues and directional derivatives of multiple eigenvalues are derived and utilized in a gradient-based optimization algorithm - the method of moving asymptotes. An adaptive linear energy interpolation method is also incorporated in nonlinear analyses to handle the low-density elements distortion under large deformations. The numerical results demonstrate that, for systems with either low or high symmetries, the nonlinear stability constraints can ensure structural stability at the target load under large deformations. Post-analysis on the B-spline fitted designs shows that the safety margin, i.e., the gap between the target load and the 1st critical load, of the optimized structures can be well controlled by selecting different stability constraint values. Interesting structural behaviors such as mode switching and multiple bifurcations are also demonstrated.

cs.CE↗

arXiv2021

On the Application of Data-Driven Deep Neural Networks in Linear and Nonlinear Structural Dynamics

The use of deep neural network (DNN) models as surrogates for linear and nonlinear structural dynamical systems is explored. The goal is to develop DNN based surrogates to predict structural response, i.e., displacements and accelerations, for given input (harmonic) excitations. In particular, the focus is on the development of efficient network architectures using fully-connected, sparsely-connected, and convolutional network layers, and on the corresponding training strategies that can provide a balance between the overall network complexity and prediction accuracy in the target dataspaces. For linear dynamics, sparsity patterns of the weight matrix in the network layers are used to construct convolutional DNNs with sparse layers. For nonlinear dynamics, it is shown that sparsity in network layers is lost, and efficient DNNs architectures with fully-connected and convolutional network layers are explored. A transfer learning strategy is also introduced to successfully train the proposed DNNs, and various loading factors that influence the network architectures are studied. It is shown that the proposed DNNs can be used as effective and accurate surrogates for predicting linear and nonlinear dynamical responses under harmonic loadings.

cs.LG↗

arXiv2020

Computational frameworks for homogenization and multiscale stability analyses of nonlinear periodic metamaterials

This paper presents a consistent computational framework for multiscale 1st order finite strain homogenization and stability analyses of rate-independent solids with periodic microstructures. Based on the principle of multiscale virtual power, the homogenization formulation is built on a priori discretized microstructure, and algorithms for computing the matrix representations of the homogenized stresses and tangent moduli are consistently derived. The homogenization results lose their validity at the onset of 1st bifurcation, which can be computed from multiscale stability analysis. The multiscale instabilities include: a) microscale structural instability which is calculated by Bloch wave analysis; and b) macroscale material instability which is calculated by rank-1 convexity checks on the homogenized tangent moduli. Details on the implementation of the Bloch wave analysis are provided, including the selection of the wave vector space and the retrieval of the real-valued buckling mode from the complex-valued Bloch wave. Three methods are detailed for solving the resulted constrained eigenvalue problem - two condensation methods and a null-space based projection method. Both implementations of the homogenization and stability analyses are validated using numerical examples including hyperelastic and elastoplastic metamaterials. Various microscale buckling phenomena are also demonstrated by examining several representative metamaterial examples. Aligned with theoretical results, the numerical results show that the microscopic long wavelength buckling can be equivalently detected by the loss of rank-1 convexity of the homogenized tangent moduli.

cs.CE↗

arXiv2019

Computational Design of Finite Strain Auxetic Metamaterials via Topology Optimization and Nonlinear Homogenization

A novel computational framework for designing metamaterials with negative Poisson's ratio over a large strain range is presented in this work by combining the density-based topology optimization together with a mixed stress/deformation driven nonlinear homogenization method. A measure of Poisson's ratio based on the macro deformations is proposed, which is further validated through direct numerical simulations. With the consistent optimization formulations based on nonlinear homogenization, auxetic metamaterial designs with respect to different loading orientations and with different unit cell domains are systematically explored. In addition, the extension to multimaterial auxetic metamaterial designs is also considered, and stable optimization formulations are presented to obtain discrete metamaterial topologies under finite strains. Various new auxetic designs are obtained based on the proposed framework. To validate the performance of optimized designs, a multiscale stability analysis is carried out using the Bloch wave method and rank-one convexity check. As demonstrated, short and/or long wavelength instabilities can occur during the loading process, leading to a change of periodicity of the microstructure, which can affect the performance of an optimized design.

cs.CE↗