arXiv subjects

Kan Chen

Publications and source records attributed to Kan Chen.

At least 19 recordsLinked to original sources

arXiv2026

Self-Organization to the Edge of Ergodicity Breaking in a Complex Adaptive System

Self-organized criticality is widely invoked for collective behavior, yet its role in objective-driven, heterogeneous adaptive systems is unclear. We introduce {\tt EvoSK}: agents learn on a Sherrington--Kirkpatrick landscape while the least fit are replaced. It self-organizes to the edge of ergodicity breaking, with scale-free avalanches ($τ\approx -1.5$) and rewards beating any tuned non-evolutionary regime. Its cascade's branching ratio is the spectral radius of the learning dynamics' Jacobian, making critical branching and ergodicity breaking one marginal-stability condition fixing the exponent. The attraction to criticality follows from the selection--mutation balance: subcritical cascades decay too fast to dislodge frozen agents, supercritical cascades shield them from selection; only the critical power-law tail supplies the polynomial rate the balance requires.

nlin.AO↗

arXiv2026

Dust Substructures and Line Perturbations driven by a Forming Planet in J16120

Hints of planet formation have been independently reported within the gap of the disc around 2MASS J16120668-301027 from millimetre continuum, infrared, and H-alpha observations. In this work, we present new evidence for ongoing planet formation based on Atacama Large Millimeter/submillimeter Array (ALMA) Band 7 observations, detecting 0.87 mm dust continuum emission together with 12CO (J=3-2) and 13CO (J=3-2) line emission. Visibility modelling of the continuum data reveals an inner disc and two dust rings peaking at 23 and 75 au. The continuum morphology is better reproduced by an eccentric disc model (e approximately 0.1) than by an axisymmetric disc. We further investigate the gas kinematics through modelling of the 12CO channel maps. The residual line-width map shows a localised increase in velocity dispersion at the position of a previously reported circumplanetary disc candidate (deprojected radius approximately 32 au, position angle approximately 170 degrees) and along its orbit. This signal is spatially coincident with kink-like features and a transition from sub-Keplerian to super-Keplerian velocities. In addition, the velocity residual map exhibits an arc-like structure extending outward from the planet candidate, while the gas kinematics, despite substantial uncertainties, is consistent with inflow towards the candidate's orbital radius. The observed increase in velocity dispersion agrees with predictions from planet-disc interaction simulations, which produce enhanced turbulence both at the planet location and along its orbital path. Taken together, the continuum morphology and gas kinematic signatures provide compelling new evidence for ongoing planet formation within the disc gap.

astro-ph.EP↗

arXiv2026

Classifying the hidden-charm pentaquarks via a flavor mixing scheme

In this work, we propose a scheme to classify the molecular states consisting of ground single-charm baryons ($Λ_c$, $Ξ_c$, $Σ_c^{(*)}$, $Ξ_c^{\prime(*)}$, $Ω_c^{(*)}$) and $\bar{D}^{(*)}/\bar{D}_s^{(*)}$ mesons. Within this framework, all considered baryon-meson systems are categorized according to the flavor components of their light degrees of freedom. We briefly illustrate how this classification scheme can consistently explain the experimentally observed $P_c$ and $P_{cs}$ states. This framework also predicts the existences of single-strange and double-strange hidden-charm bound states. The attractive interactions of these states arise from channel mixing between $Σ_c^{(*)}\bar{D}_s^{(*)}$ and $Ξ_c^{\prime(*)}\bar{D}^{(*)}$ for single-strange systems, and mixing between $Ξ_c^{\prime(*)}\bar{D}_s^{(*)}$ and $Ω_c^{(*)}\bar{D}^{(*)}$ for double-strange systems, respectively. Using parameters fitted from the measured $P_c$ and $P_{cs}$ states, we systematically present the predicted mass spectra for these single- and double-strange hidden-charm bound states.

hep-ph↗

arXiv2026

Design-Life Levels for Environmental Extremes: A Dependence-Aware Block-Maxima Workflow for Severity and Persistence

Environmental risk assessment often asks how large the maximum discharge, flood, or insured loss may become over a design life rather than in a single year. In environmental records, planning-horizon risk is complicated by limited record length, extremal clustering, and sub-asymptotic behavior, yet severity estimation, clustering assessment, and design-life levels are often handled separately. We develop a dependence-aware block-maxima workflow that links these tasks within a single inferential scheme. The severity branch estimates the extreme value index from sliding block-maximum quantile scaling using data-adaptive plateau selection and covariance-aware feasible generalized least squares. The persistence branch pools native block-maxima extremal-index paths over a stable block-size window to characterize extremal clustering. Design-life levels are then derived on the chosen observation clock, with the extremal index retained as a complementary descriptor of persistence. In synthetic short-record benchmarks, the main gain is improved interval calibration under overlap dependence, especially within block-maxima comparisons. Applications to Texas and Florida streamflow and National Flood Insurance Program building-payout claims show persistent hydrologic extremes but much faster escalation of insured losses across adjacent parts of the flood-risk chain. The workflow provides calibrated severity, persistence, and design-life levels for environmental design and flood-risk assessment under dependent records.

stat.ME↗

arXiv2026

HFX: Joint Design of Algorithms and Systems for Multi-SLO Serving and Fast Scaling

Large language model (LLM) serving faces the dual challenge of meeting strict user-specific service-level objectives (SLOs) while minimizing computational cost under dynamic, multi-task workloads. Existing approaches either rely on static scheduling policies or focus on single-task settings, limiting their applicability in real-world deployments with heterogeneous requests, variable prompt lengths, and elastic scaling requirements. We present HFX, a production LLM serving system that jointly optimizes request scheduling and elastic scaling across model replicas to satisfy diverse SLOs. HFX introduces a \textbf{scheduler} that performs proactive budget estimation and prioritization to ensure SLO compliance for both new and in-flight requests. HFX also integrates a \textbf{scaler} that supports fast device-to-device (D2D) weight transfer, reducing cold-start latency. Additionally, the system supports both colocated and disaggregated prefill/decode deployments, enabling adaptation to diverse workload patterns and cloud environments. Through extensive experiments on multi-task workloads, we demonstrate consistently higher SLO attainment, lower end-to-end latency, and lower NPU usage cost by up to 4.44$\times$, 65.82\%, and 49.81\%, respectively, compared to state-of-the-art systems. Our results highlight the effectiveness of SLO-aware scheduling and scaling in practical LLM serving, providing a robust framework for cost-efficient and SLO-compliant deployments.

cs.DC↗

arXiv2025

Transformational astrophysics and exoplanet science with Habitable Worlds Observatory's High Resolution Imager

Habitable Worlds Observatory (HWO) will be NASA's flagship space telescope of the 2040s, designed to search for life on other planets and to transform broad areas of astrophysics. NASA are seeking international partners, and the UK is well-placed to lead the design and construction of its imaging camera - which is likely to produce the mission's most visible public impact. Early participation in the mission would return investment to UK industry, and bring generational leadership for the UK in space science, space technology, and astrophysics.

astro-ph.IM↗

arXiv2025

Task-Oriented Communications for 3D Scene Representation: Balancing Timeliness and Fidelity

Real-time Three-dimensional (3D) scene representation is a foundational element that supports a broad spectrum of cutting-edge applications, including digital manufacturing, Virtual, Augmented, and Mixed Reality (VR/AR/MR), and the emerging metaverse. Despite advancements in real-time communication and computing, achieving a balance between timeliness and fidelity in 3D scene representation remains a challenge. This work investigates a wireless network where multiple homogeneous mobile robots, equipped with cameras, capture an environment and transmit images to an edge server over channels for 3D representation. We propose a contextual-bandit Proximal Policy Optimization (PPO) framework incorporating both Age of Information (AoI) and semantic information to optimize image selection for representation, balancing data freshness and representation quality. Two policies -- the $ω$-threshold and $ω$-wait policies -- together with two benchmark methods are evaluated, timeliness embedding and weighted sum, on standard datasets and baseline 3D scene representation models. Experimental results demonstrate improved representation fidelity while maintaining low latency, offering insight into the model's decision-making process. This work advances real-time 3D scene representation by optimizing the trade-off between timeliness and fidelity in dynamic environments.

cs.CV↗

arXiv2025

Task-Oriented Edge-Assisted Cross-System Design for Real-Time Human-Robot Interaction in Industrial Metaverse

Real-time human-device interaction in industrial Metaverse faces challenges such as high computational load, limited bandwidth, and strict latency. This paper proposes a task-oriented edge-assisted cross-system framework using digital twins (DTs) to enable responsive interactions. By predicting operator motions, the system supports: 1) proactive Metaverse rendering for visual feedback, and 2) preemptive control of remote devices. The DTs are decoupled into two virtual functions-visual display and robotic control-optimizing both performance and adaptability. To enhance generalizability, we introduce the Human-In-The-Loop Model-Agnostic Meta-Learning (HITL-MAML) algorithm, which dynamically adjusts prediction horizons. Evaluation on two tasks demonstrates the framework's effectiveness: in a Trajectory-Based Drawing Control task, it reduces weighted RMSE from 0.0712 m to 0.0101 m; in a real-time 3D scene representation task for nuclear decommissioning, it achieves a PSNR of 22.11, SSIM of 0.8729, and LPIPS of 0.1298. These results show the framework's capability to ensure spatial precision and visual fidelity in real-time, high-risk industrial environments.

cs.RO↗

arXiv2025

$D$-wave dimeson resonance interpretation to the $Z_c/Z_{cs}/Z_b$ states

In this work, we construct the $S$-wave, $P$-wave, and $D$-wave $D^{(*)}\bar{D}^{*}_{(s)}$/$B^{(*)}\bar{B}^{*}_{(s)}$ interactions by considering the lowest order contributions from the leading order (LO), next-to-leading order (NLO), and next-to-next-to-next-to-leading order (N$^3$LO) contact terms, respectively. After solving the corresponding Lippmann-Schwinger equation (LSE), we obtain the typical pole trajectory for the $S$-wave/$P$-wave/$D$-wave state. We adjust the $P$-wave low energy constant (LEC) and {accordingly obtain a $P$-wave $D\bar{D}^*/D^*\bar{D}$} resonance state that may correspond to the observed $G(3900)$, { and its $P$-wave $D^*\bar{D}^*$ and $B^{(*)}\bar{B}^{*}$ partners are also predicted}. Then we proceed to adjust the $D$-wave LECs to looking for the $D$-wave $D^{(*)}\bar{D}^{(*)}_{(s)}$/$B^{(*)}\bar{B}^{(*)}_{(s)}$ resonances. The satisfactory consistencies between our results { and the experimental resonance parameters} of $Z_c(3900)$/$Z_c(4020)$, $Z_b(10610)$/$Z_b(10650)$, and $Z_{cs}(4000)$/$Z_{cs}(4220)$ indicate that the $D$-wave resonance interpretation may provide a unified picture to understand these { isovector charmoniumlike states. Especially, the broad width features of $Z_{cs}(4000)$ and $Z_{cs}(4220)$ can be naturally reproduced by interpreting them as $D$-wave $D\bar{D}_s^*$ and $D^*\bar{D}_s^*$ resonances, respectively.

hep-ph↗

arXiv2025

Planet-induced Gas and Dust Substructure Feedbacks on Disk Thermal Structure

Protoplanets can interact with their natal disks and generate gas and dust substructures such as gaps and rings. However, how these planet-induced substructures affect the disk temperature, and how that in turn influences the substructures, remains unclear. We aim to study disk substructures and the thermal structure self-consistently and explore their impact on volatile distribution. To this end, we perform iterative multi-fluid hydrodynamical and radiative transfer simulations of planet-disk interactions. We find that the temperature in a structured disk deviates significantly from that of a smooth disk due to giant planet formation. In particular, midplane temperatures in gaps can increase by tens of Kelvin, leading to volatile sublimation as well as radial shifts and multiplication of icelines. Comparing our multi-dust models with previous gas-only models, we find that the former produces slightly shallower gaps and temperatures about 10 K ($\sim25\%$) higher. Furthermore, the temperature at dust rings formed by pressure bumps can drop by several Kelvin, creating volatile freeze-out regions. Nevertheless, the overall midplane ice distribution is not strongly sensitive to whether dust is included. We also investigate the effect of varying disk viscosity. Increasing $α$ viscosity from $10^{-4}$ to $10^{-2}$ leads to a roughly 10 K ($\sim25\%$) warmer midplane due to enhanced vertical dust mixing. However, higher viscosity suppresses gap opening and reduces the temperature enhancement within gaps. As a result, iceline locations do not follow a simple trend with viscosity. Finally, we propose an observational strategy using ALMA to test our predicted temperature changes within disk gaps.

astro-ph.EP↗

arXiv2025

Haptic-Based User Authentication for Tele-robotic System

Tele-operated robots rely on real-time user behavior mapping for remote tasks, but ensuring secure authentication remains a challenge. Traditional methods, such as passwords and static biometrics, are vulnerable to spoofing and replay attacks, particularly in high-stakes, continuous interactions. This paper presents a novel anti-spoofing and anti-replay authentication approach that leverages distinctive user behavioral features extracted from haptic feedback during human-robot interactions. To evaluate our authentication approach, we collected a time-series force feedback dataset from 15 participants performing seven distinct tasks. We then developed a transformer-based deep learning model to extract temporal features from the haptic signals. By analyzing user-specific force dynamics, our method achieves over 90 percent accuracy in both user identification and task classification, demonstrating its potential for enhancing access control and identity assurance in tele-robotic systems.

cs.RO↗

arXiv2025

Vine Copulas as Differentiable Computational Graphs

Vine copulas are sophisticated models for multivariate distributions and are increasingly used in machine learning. To facilitate their integration into modern ML pipelines, we introduce the vine computational graph, a DAG that abstracts the multilevel vine structure and associated computations. On this foundation, we devise new algorithms for conditional sampling, efficient sampling-order scheduling, and constructing vine structures for customized conditioning variables. We implement these ideas in torchvinecopulib, a GPU-accelerated Python library built upon PyTorch, delivering improved scalability for fitting, sampling, and density evaluation. Our experiments illustrate how gradient flowing through the vine can improve Vine Copula Autoencoders and that incorporating vines for uncertainty quantification in deep learning can outperform MC-dropout, deep ensembles, and Bayesian Neural Networks in sharpness, calibration, and runtime. By recasting vine copula models as computational graphs, our work connects classical dependence modeling with modern deep-learning toolchains and facilitates the integration of state-of-the-art copula methods in modern machine learning pipelines.

cs.LG↗

arXiv2025

Preference-Driven Active 3D Scene Representation for Robotic Inspection in Nuclear Decommissioning

Active 3D scene representation is pivotal in modern robotics applications, including remote inspection, manipulation, and telepresence. Traditional methods primarily optimize geometric fidelity or rendering accuracy, but often overlook operator-specific objectives, such as safety-critical coverage or task-driven viewpoints. This limitation leads to suboptimal viewpoint selection, particularly in constrained environments such as nuclear decommissioning. To bridge this gap, we introduce a novel framework that integrates expert operator preferences into the active 3D scene representation pipeline. Specifically, we employ Reinforcement Learning from Human Feedback (RLHF) to guide robotic path planning, reshaping the reward function based on expert input. To capture operator-specific priorities, we conduct interactive choice experiments that evaluate user preferences in 3D scene representation. We validate our framework using a UR3e robotic arm for reactor tile inspection in a nuclear decommissioning scenario. Compared to baseline methods, our approach enhances scene representation while optimizing trajectory efficiency. The RLHF-based policy consistently outperforms random selection, prioritizing task-critical details. By unifying explicit 3D geometric modeling with implicit human-in-the-loop optimization, this work establishes a foundation for adaptive, safety-critical robotic perception systems, paving the way for enhanced automation in nuclear decommissioning, remote maintenance, and other high-risk environments.

cs.RO↗

arXiv2025

A Differential Effect Approach to Partial Identification of Treatment Effects

We consider identification and inference for the average treatment effect and heterogeneous treatment effect conditional on observable covariates in the presence of unmeasured confounding. Since point identification of these treatment effects is not achievable without strong assumptions, we obtain bounds on these treatment effects by leveraging differential effects, a tool that allows for using a second treatment to learn the effect of the first treatment. The differential effect is the effect of using one treatment in lieu of the other. We provide conditions under which differential treatment effects can be used to point identify or partially identify treatment effects. Under these conditions, we develop a flexible and easy-to-implement semi-parametric framework to estimate bounds and leverage a two-stage approach to conduct statistical inference on effects of interest. The proposed method is examined through a simulation study and a case study that investigates the effect of smoking on the blood level of cadmium using the National Health and Nutrition Examination Survey.

stat.ME↗

arXiv2025

Sensitivity Analysis for Attributable Effects in Case$^2$ Studies

The case$^2$ study, also referred to as the case-case study design, is a valuable approach for conducting inference for treatment effects. Unlike traditional case-control studies, the case$^2$ design compares treatment in two types of cases with the same disease. A key quantity of interest is the attributable effect, which is the number of cases of disease among treated units which are caused by the treatment. Two key assumptions that are usually made for making inferences about the attributable effect in case$^2$ studies are 1.) treatment does not cause the second type of case, and 2.) the treatment does not alter an individual's case type. However, these assumptions are not realistic in many real-data applications. In this article, we present a sensitivity analysis framework to scrutinize the impact of deviations from these assumptions on obtained results. We also include sensitivity analyses related to the assumption of unmeasured confounding, recognizing the potential bias introduced by unobserved covariates. The proposed methodology is exemplified through an investigation into whether having violent behavior in the last year of life increases suicide risk via 1993 National Mortality Followback Survey dataset.

stat.ME↗

arXiv2025

How to Build an Adaptive AI Tutor for Any Course Using Knowledge Graph-Enhanced Retrieval-Augmented Generation (KG-RAG)

Integrating Large Language Models (LLMs) in Intelligent Tutoring Systems (ITS) presents transformative opportunities for personalized education. However, current implementations face two critical challenges: maintaining factual accuracy and delivering coherent, context-aware instruction. While Retrieval-Augmented Generation (RAG) partially addresses these issues, its reliance on pure semantic similarity limits its effectiveness in educational contexts where conceptual relationships are crucial. This paper introduces Knowledge Graph-enhanced Retrieval-Augmented Generation (KG-RAG), a novel framework that integrates structured knowledge representation with context-aware retrieval to enable more effective AI tutoring. We present three key contributions: (1) a novel architecture that grounds AI responses in structured domain knowledge, (2) empirical validation through controlled experiments (n=76) demonstrating significant learning improvements (35% increase in assessment scores, p<0.001), and (3) a comprehensive implementation framework addressing practical deployment considerations. These results establish KG-RAG as a robust solution for developing adaptable AI tutoring systems across diverse educational contexts.

cs.CL↗

arXiv2024

Using Case Description Information to Reduce Sensitivity to Bias for the Attributable Fraction Among the Exposed

The attributable fraction among the exposed (\textbf{AF}$_e$), also known as the attributable risk or excess fraction among the exposed, is the proportion of disease cases among the exposed that could be avoided by eliminating the exposure. Understanding the \textbf{AF}$_e$ for different exposures helps guide public health interventions. The conventional approach to inference for the \textbf{AF}$_e$ assumes no unmeasured confounding and could be sensitive to hidden bias from unobserved covariates. In this paper, we propose a new approach to reduce sensitivity to hidden bias for conducting statistical inference on the \textbf{AF}$_e$ by leveraging case description information. Case description information is information that describes the case, e.g., the subtype of cancer. The exposure may have more of an effect on some types of cases than other types. We explore how leveraging case description information can reduce sensitivity to bias from unmeasured confounding through an asymptotic tool, design sensitivity, and simulation studies. We allow for the possibility that leveraging case definition information may introduce additional selection bias through an additional sensitivity parameter. The proposed methodology is illustrated by re-examining alcohol consumption and the risk of postmenopausal invasive breast cancer using case description information on the subtype of cancer (hormone-sensitive or insensitive) using data from the Women's Health Initiative (WHI) Observational Study (OS).

stat.ME↗

arXiv2024

Task-Oriented Edge-Assisted Cooperative Data Compression, Communications and Computing for UGV-Enhanced Warehouse Logistics

This paper explores the growing need for task-oriented communications in warehouse logistics, where traditional communication Key Performance Indicators (KPIs)-such as latency, reliability, and throughput-often do not fully meet task requirements. As the complexity of data flow management in large-scale device networks increases, there is also a pressing need for innovative cross-system designs that balance data compression, communication, and computation. To address these challenges, we propose a task-oriented, edge-assisted framework for cooperative data compression, communication, and computing in Unmanned Ground Vehicle (UGV)-enhanced warehouse logistics. In this framework, two UGVs collaborate to transport cargo, with control functions-navigation for the front UGV and following/conveyance for the rear UGV-offloaded to the edge server to accommodate their limited on-board computing resources. We develop a Deep Reinforcement Learning (DRL)-based two-stage point cloud data compression algorithm that dynamically and collaboratively adjusts compression ratios according to task requirements, significantly reducing communication overhead. System-level simulations of our UGV logistics prototype demonstrate the framework's effectiveness and its potential for swift real-world implementation.

cs.NI↗