arXiv subjects

Kai Zhao

Publications and source records attributed to Kai Zhao.

At least 73 records · Page 4Linked to original sources

arXiv2025

No-Human in the Loop: Agentic Evaluation at Scale for Recommendation

Evaluating large language models (LLMs) as judges is increasingly critical for building scalable and trustworthy evaluation pipelines. We present ScalingEval, a large-scale benchmarking study that systematically compares 36 LLMs, including GPT, Gemini, Claude, and Llama, across multiple product categories using a consensus-driven evaluation protocol. Our multi-agent framework aggregates pattern audits and issue codes into ground-truth labels via scalable majority voting, enabling reproducible comparison of LLM evaluators without human annotation. Applied to large-scale complementary-item recommendation, the benchmark reports four key findings: (i) Anthropic Claude 3.5 Sonnet achieves the highest decision confidence; (ii) Gemini 1.5 Pro offers the best overall performance across categories; (iii) GPT-4o provides the most favorable latency-accuracy-cost tradeoff; and (iv) GPT-OSS 20B leads among open-source models. Category-level analysis shows strong consensus in structured domains (Electronics, Sports) but persistent disagreement in lifestyle categories (Clothing, Food). These results establish ScalingEval as a reproducible benchmark and evaluation protocol for LLMs as judges, with actionable guidance on scaling, reliability, and model family tradeoffs.

cs.AI↗

arXiv2025

Lamb wave-based MVDR imaging and CNN classification of defects in pipelines

Significant progress has been made in ultrasonic guided wave (UGW) technology for pipe signal processing and defect imaging recently. However, developing a defect localization and imaging algorithm that requires fewer parameters, offers a wide imaging range, and achieves high positioning accuracy remains a considerable challenge. Traditional direction-of-arrival (DOA) estimation methods primarily focus on the single-angle estimation with low resolution, failing to satisfy the spatial localization requirements for pipeline defects. Therefore, a high-resolution spatial spectrum estimation algorithm is introduced to realize the two-dimensional DOA estimation. By distributing multiple sensors in a specific geometric configuration to form an array, this method employs the array signal processing technology to accurately obtain the DOA of spatial signals. A uniform circular array (UCA) is employed in the present study to receive signals from pipe defects, and high-precision localization and imaging of defects are achieved based on the two-dimensional minimum variance distortionless response (MVDR) beamforming algorithm, with a relative positioning error of less than 1%. An image classification method based on the convolutional neural network (CNN) is further developed to distinguish the defect types. By constructing a novel CNN model to extract defect features and perform classification, this model achieves a prediction accuracy of 97.50%, which effectively distinguishes between defect types.

physics.app-ph↗

arXiv2025

CC-Time: Cross-Model and Cross-Modality Time Series Forecasting

With the success of pre-trained language models (PLMs) in various application fields beyond natural language processing, language models have raised emerging attention in the field of time series forecasting (TSF) and have shown great prospects. However, current PLM-based TSF methods still fail to achieve satisfactory prediction accuracy matching the strong sequential modeling power of language models. To address this issue, we propose Cross-Model and Cross-Modality Learning with PLMs for time series forecasting (CC-Time). We explore the potential of PLMs for time series forecasting from two aspects: 1) what time series features could be modeled by PLMs, and 2) whether relying solely on PLMs is sufficient for building time series models. In the first aspect, CC-Time incorporates cross-modality learning to model temporal dependency and channel correlations in the language model from both time series sequences and their corresponding text descriptions. In the second aspect, CC-Time further proposes the cross-model fusion block to adaptively integrate knowledge from the PLMs and time series model to form a more comprehensive modeling of time series patterns. Extensive experiments on nine real-world datasets demonstrate that CC-Time achieves state-of-the-art prediction accuracy in both full-data training and few-shot learning situations.

cs.LG↗

arXiv2025

Spatial Reasoning in Foundation Models: Benchmarking Object-Centric Spatial Understanding

Spatial understanding is a critical capability for vision foundation models. While recent advances in large vision models or vision-language models (VLMs) have expanded recognition capabilities, most benchmarks emphasize localization accuracy rather than whether models capture how objects are arranged and related within a scene. This gap is consequential; effective scene understanding requires not only identifying objects, but reasoning about their relative positions, groupings, and depth. In this paper, we present a systematic benchmark for object-centric spatial reasoning in foundation models. Using a controlled synthetic dataset, we evaluate state-of-the-art vision models (e.g., GroundingDINO, Florence-2, OWLv2) and large VLMs (e.g., InternVL, LLaVA, GPT-4o) across three tasks: spatial localization, spatial reasoning, and downstream retrieval tasks. We find a stable trade-off: detectors such as GroundingDINO and OWLv2 deliver precise boxes with limited relational reasoning, while VLMs like SmolVLM and GPT-4o provide coarse layout cues and fluent captions but struggle with fine-grained spatial context. Our study highlights the gap between localization and true spatial understanding, and pointing toward the need for spatially-aware foundation models in the community.

cs.CV↗

arXiv2025

LayoutAgent: A Vision-Language Agent Guided Compositional Diffusion for Spatial Layout Planning

Designing realistic multi-object scenes requires not only generating images, but also planning spatial layouts that respect semantic relations and physical plausibility. On one hand, while recent advances in diffusion models have enabled high-quality image generation, they lack explicit spatial reasoning, leading to unrealistic object layouts. On the other hand, traditional spatial planning methods in robotics emphasize geometric and relational consistency, but they struggle to capture semantic richness in visual scenes. To bridge this gap, in this paper, we propose LayoutAgent, an agentic framework that unifies vision-language reasoning with compositional diffusion for layout generation. Given multiple input images with target objects in them, our method first employs visual-language model to preprocess the inputs through segmentation, object size estimation, scene graph construction, and prompt rewriting. Then we leverage compositional diffusion-a method traditionally used in robotics-to synthesize bounding boxes that respect object relations encoded in the scene graph for spatial layouts. In the end, a foreground-conditioned image generator composes the complete scene by rendering the objects into the planned layout guided by designed prompts. Experiments demonstrate that LayoutAgent outperforms other state-of-the-art layout generation models in layout coherence, spatial realism and aesthetic alignment.

cs.CV↗

arXiv2025

Towards a General Time Series Forecasting Model with Unified Representation and Adaptive Transfer

With the growing availability of multi-domain time series data, there is an increasing demand for general forecasting models pre-trained on multi-source datasets to support diverse downstream prediction scenarios. Existing time series foundation models primarily focus on scaling up pre-training datasets and model sizes to enhance generalization performance. In this paper, we take a different approach by addressing two critical aspects of general forecasting models: (1) how to derive unified representations from heterogeneous multi-domain time series data, and (2) how to effectively capture domain-specific features to enable adaptive transfer across various downstream scenarios. To address the first aspect, we propose Decomposed Frequency Learning as the pre-training task, which leverages frequency-based masking and reconstruction to decompose coupled semantic information in time series, resulting in unified representations across domains. For the second aspect, we introduce the Time Series Register, which captures domain-specific representations during pre-training and enhances adaptive transferability to downstream tasks. Our model achieves the state-of-the-art forecasting performance on seven real-world benchmarks, demonstrating remarkable few-shot and zero-shot capabilities.

cs.LG↗

arXiv2025

Millisecond-Response Tracking and Gazing System for UAVs: A Domestic Solution Based on "Phytium + Cambricon"

In the frontier research and application of current video surveillance technology, traditional camera systems exhibit significant limitations of response delay exceeding 200 ms in dynamic scenarios due to the insufficient deep feature extraction capability of automatic recognition algorithms and the efficiency bottleneck of computing architectures, failing to meet the real-time requirements in complex scenes. To address this issue, this study proposes a heterogeneous computing architecture based on Phytium processors and Cambricon accelerator cards, constructing a UAV tracking and gazing system with millisecond-level response capability. At the hardware level, the system adopts a collaborative computing architecture of Phytium FT-2000/4 processors and MLU220 accelerator cards, enhancing computing power through multi-card parallelism. At the software level, it innovatively integrates a lightweight YOLOv5s detection network with a DeepSORT cascaded tracking algorithm, forming a closed-loop control chain of "detection-tracking-feedback". Experimental results demonstrate that the system achieves a stable single-frame comprehensive processing delay of 50-100 ms in 1920*1080 resolution video stream processing, with a multi-scale target recognition accuracy of over 98.5%, featuring both low latency and high precision. This study provides an innovative solution for UAV monitoring and the application of domestic chips.

cs.CV↗

arXiv2025

STZ: A High Quality and High Speed Streaming Lossy Compression Framework for Scientific Data

Error-bounded lossy compression is one of the most efficient solutions to reduce the volume of scientific data. For lossy compression, progressive decompression and random-access decompression are critical features that enable on-demand data access and flexible analysis workflows. However, these features can severely degrade compression quality and speed. To address these limitations, we propose a novel streaming compression framework that supports both progressive decompression and random-access decompression while maintaining high compression quality and speed. Our contributions are three-fold: (1) we design the first compression framework that simultaneously enables both progressive decompression and random-access decompression; (2) we introduce a hierarchical partitioning strategy to enable both streaming features, along with a hierarchical prediction mechanism that mitigates the impact of partitioning and achieves high compression quality -- even comparable to state-of-the-art (SOTA) non-streaming compressor SZ3; and (3) our framework delivers high compression and decompression speed, up to 6.7$\times$ faster than SZ3.

cs.DC↗

arXiv2025

Boosting Scientific Error-Bounded Lossy Compression through Optimized Synergistic Lossy-Lossless Orchestration

As high-performance computing architectures evolve, more scientific computing workflows are being deployed on advanced computing platforms such as GPUs. These workflows can produce raw data at extremely high throughputs, requiring urgent high-ratio and low-latency error-bounded data compression solutions. In this paper, we propose cuSZ-Hi, an optimized high-ratio GPU-based scientific error-bounded lossy compressor with a flexible, domain-irrelevant, and fully open-source framework design. Our novel contributions are: 1) We maximally optimize the parallelized interpolation-based data prediction scheme on GPUs, enabling the full functionalities of interpolation-based scientific data prediction that are adaptive to diverse data characteristics; 2) We thoroughly explore and investigate lossless data encoding techniques, then craft and incorporate the best-fit lossless encoding pipelines for maximizing the compression ratio of cuSZ-Hi; 3) We systematically evaluate cuSZ-Hi on benchmarking datasets together with representative baselines. Compared to existing state-of-the-art scientific lossy compressors, with comparative or better throughput than existing high-ratio scientific error-bounded lossy compressors on GPUs, cuSZ-Hi can achieve up to 249% compression ratio improvement under the same error bound, and up to 215% compression ratio improvement under the same decompression data PSNR.

cs.DC↗

arXiv2025

Unified Performance Control for Non-Square Nonlinear Systems with Relaxed Controllability

In this paper, we investigate the problem of unified prescribed performance tracking for a class of non-square strict-feedback nonlinear systems under relaxed controllability conditions. By using a skillful matrix decomposition and introducing some feasible auxiliary matrices, a more generalized controllability condition than the current state of the art is constructed, which can be applied to both square and non-square nonlinear systems subject to actuator faults and unknown yet time-varying control gain. Incorporating the relaxed controllability conditions and the uniform performance specifications into the backstepping design procedure, a prescribed performance fault-tolerant controller is developed that can achieve different performance demands without modifying the controller structure, which is more flexible and practical.In addition, the destruction of the system stability by unknown controllability auxiliary matrices and unknown nonlinearities is circumvented by embedding the available core information of the state-dependent uncertainties into the design procedure. Both theoretical analysis and numerical simulation demonstrate the effectiveness and benefits of the proposed method.

eess.SY↗

arXiv2025

GPZ: GPU-Accelerated Lossy Compressor for Particle Data

Particle-based simulations and point-cloud applications generate massive, irregular datasets that challenge storage, I/O, and real-time analytics. Traditional compression techniques struggle with irregular particle distributions and GPU architectural constraints, often resulting in limited throughput and suboptimal compression ratios. In this paper, we present GPZ, a high-performance, error-bounded lossy compressor designed specifically for large-scale particle data on modern GPUs. GPZ employs a novel four-stage parallel pipeline that synergistically balances high compression efficiency with the architectural demands of massively parallel hardware. We introduce a suite of targeted optimizations for computation, memory access, and GPU occupancy that enables GPZ to achieve near-hardware-limit throughput. We conduct an extensive evaluation on three distinct GPU architectures (workstation, data center, and edge) using six large-scale, real-world scientific datasets from five distinct domains. The results demonstrate that GPZ consistently and significantly outperforms five state-of-the-art GPU compressors, delivering up to 8x higher end-to-end throughput while simultaneously achieving superior compression ratios and data quality.

cs.DC↗

arXiv2025

ARAG: Agentic Retrieval Augmented Generation for Personalized Recommendation

Retrieval-Augmented Generation (RAG) has shown promise in enhancing recommendation systems by incorporating external context into large language model prompts. However, existing RAG-based approaches often rely on static retrieval heuristics and fail to capture nuanced user preferences in dynamic recommendation scenarios. In this work, we introduce ARAG, an Agentic Retrieval-Augmented Generation framework for Personalized Recommendation, which integrates a multi-agent collaboration mechanism into the RAG pipeline. To better understand the long-term and session behavior of the user, ARAG leverages four specialized LLM-based agents: a User Understanding Agent that summarizes user preferences from long-term and session contexts, a Natural Language Inference (NLI) Agent that evaluates semantic alignment between candidate items retrieved by RAG and inferred intent, a context summary agent that summarizes the findings of NLI agent, and an Item Ranker Agent that generates a ranked list of recommendations based on contextual fit. We evaluate ARAG accross three datasets. Experimental results demonstrate that ARAG significantly outperforms standard RAG and recency-based baselines, achieving up to 42.1% improvement in NDCG@5 and 35.5% in Hit@5. We also, conduct an ablation study to analyse the effect by different components of ARAG. Our findings highlight the effectiveness of integrating agentic reasoning into retrieval-augmented recommendation and provide new directions for LLM-based personalization.

cs.IR↗

arXiv2025

SABER: Switchable and Balanced Training for Efficient LLM Reasoning

Large language models (LLMs) empowered by chain-of-thought reasoning have achieved impressive accuracy on complex tasks but suffer from excessive inference costs and latency when applied uniformly to all problems. We propose SABER (Switchable and Balanced Training for Efficient LLM Reasoning), a reinforcement learning framework that endows LLMs with user-controllable, token-budgeted reasoning. SABER first profiles each training example's base-model thinking token usage and assigns it to one of the predefined budget tiers. During fine-tuning, the model is guided by system prompts and length-aware rewards to respect its assigned budget. In parallel, we incorporate no-think examples to ensure the model remains reliable even when explicit reasoning is turned off. SABER further supports four discrete inference modes - NoThink, FastThink, CoreThink, and DeepThink, enabling flexible trade-offs between latency and reasoning depth. Extensive evaluations on math reasoning (MATH, GSM8K), code generation (MBPP), and logical reasoning (LiveBench-Reasoning) demonstrate that SABER achieves high accuracy under tight budgets, graceful degradation, and effective cross-scale and cross-domain generalization. In particular, SABER-FastThink cuts reasoning length by 65.4% and yields a 3.6% accuracy gain compared with the base model on the MATH benchmark.

cs.CL↗

arXiv2025

CodeBoost: Boosting Code LLMs by Squeezing Knowledge from Code Snippets with RL

Code large language models (LLMs) have become indispensable tools for building efficient and automated coding pipelines. Existing models are typically post-trained using reinforcement learning (RL) from general-purpose LLMs using "human instruction-final answer" pairs, where the instructions are usually from manual annotations. However, collecting high-quality coding instructions is both labor-intensive and difficult to scale. On the other hand, code snippets are abundantly available from various sources. This imbalance presents a major bottleneck in instruction-based post-training. We propose CodeBoost, a post-training framework that enhances code LLMs purely from code snippets, without relying on human-annotated instructions. CodeBoost introduces the following key components: (1) maximum-clique curation, which selects a representative and diverse training corpus from code; (2) bi-directional prediction, which enables the model to learn from both forward and backward prediction objectives; (3) error-aware prediction, which incorporates learning signals from both correct and incorrect outputs; (4) heterogeneous augmentation, which diversifies the training distribution to enrich code semantics; and (5) heterogeneous rewarding, which guides model learning through multiple reward types including format correctness and execution feedback from both successes and failures. Extensive experiments across several code LLMs and benchmarks verify that CodeBoost consistently improves performance, demonstrating its effectiveness as a scalable and effective training pipeline.

cs.CL↗

arXiv2025

Production of Iodine Isotopes via Ultra-intense Laser Driven Photonuclear Reactions

The investigation and production of proton-rich iodine isotopes predominantly rely on conventional accelerator-based methods, typically requiring prolonged irradiation periods to measure or achieve quantifiable yields for isotopic isolation. Bremsstrahlung radiation sources generated by high-power laser-plasma-accelerated electron beams with ultrahigh charge (tens of nanocoulombs) bombarding high-Z targets demonstrate extraordinary photon flux characteristics. An electron beam with a total charge of approximately 47.7 nC (E$_e$ $\gt$ 10.4 MeV) was generated in our experiment by focusing a ultra-intense laser pulse onto a deuterium gas jet. Laser-driven bremsstrahlung was employed to induce $^{127}I$$(γ,xn)$ ($x$ = 1,3,4,6-8), and the product yields and the corresponding flux-weighted average cross sections are reported. Our results demonstrate production of medical isotopes, with average yields of $^{124}$I and $^{123}$I at approximately $9.83\pm0.45\times10^{5}$/shot and $2.81\pm0.11\times10^{5}$/shot, respectively. This method, utilizing high-power lasers to generate bremsstrahlung radiation, shows significant potential for medical applications and opens new avenues for studying photonuclear processes in astrophysical contexts.

nucl-ex↗

arXiv2025

VL-CLIP: Enhancing Multimodal Recommendations via Visual Grounding and LLM-Augmented CLIP Embeddings

Multimodal learning plays a critical role in e-commerce recommendation platforms today, enabling accurate recommendations and product understanding. However, existing vision-language models, such as CLIP, face key challenges in e-commerce recommendation systems: 1) Weak object-level alignment, where global image embeddings fail to capture fine-grained product attributes, leading to suboptimal retrieval performance; 2) Ambiguous textual representations, where product descriptions often lack contextual clarity, affecting cross-modal matching; and 3) Domain mismatch, as generic vision-language models may not generalize well to e-commerce-specific data. To address these limitations, we propose a framework, VL-CLIP, that enhances CLIP embeddings by integrating Visual Grounding for fine-grained visual understanding and an LLM-based agent for generating enriched text embeddings. Visual Grounding refines image representations by localizing key products, while the LLM agent enhances textual features by disambiguating product descriptions. Our approach significantly improves retrieval accuracy, multimodal retrieval effectiveness, and recommendation quality across tens of millions of items on one of the largest e-commerce platforms in the U.S., increasing CTR by 18.6%, ATC by 15.5%, and GMV by 4.0%. Additional experimental results show that our framework outperforms vision-language models, including CLIP, FashionCLIP, and GCL, in both precision and semantic alignment, demonstrating the potential of combining object-aware visual grounding and LLM-enhanced text representation for robust multimodal recommendations.

cs.IR↗

arXiv2025

GRACE: Generative Recommendation via Journey-Aware Sparse Attention on Chain-of-Thought Tokenization

Generative models have recently demonstrated strong potential in multi-behavior recommendation systems, leveraging the expressive power of transformers and tokenization to generate personalized item sequences. However, their adoption is hindered by (1) the lack of explicit information for token reasoning, (2) high computational costs due to quadratic attention complexity and dense sequence representations after tokenization, and (3) limited multi-scale modeling over user history. In this work, we propose GRACE (Generative Recommendation via journey-aware sparse Attention on Chain-of-thought tokEnization), a novel generative framework for multi-behavior sequential recommendation. GRACE introduces a hybrid Chain-of-Thought (CoT) tokenization method that encodes user-item interactions with explicit attributes from product knowledge graphs (e.g., category, brand, price) over semantic tokenization, enabling interpretable and behavior-aligned generation. To address the inefficiency of standard attention, we design a Journey-Aware Sparse Attention (JSA) mechanism, which selectively attends to compressed, intra-, inter-, and current-context segments in the tokenized sequence. Experiments on two real-world datasets show that GRACE significantly outperforms state-of-the-art baselines, achieving up to +106.9% HR@10 and +106.7% NDCG@10 improvement over the state-of-the-art baseline on the Home domain, and +22.1% HR@10 on the Electronics domain. GRACE also reduces attention computation by up to 48% with long sequences.

cs.CL↗

arXiv2025

QPET: A Versatile and Portable Quantity-of-Interest-Preservation Framework for Error-Bounded Lossy Compression

Error-bounded lossy compression has been widely adopted in many scientific domains because it can address the challenges in storing, transferring, and analyzing unprecedented amounts of scientific data. Although error-bounded lossy compression offers general data distortion control by enforcing strict error bounds on raw data, it may fail to meet the quality requirements on the results of downstream analysis, a.k.a. Quantities of Interest (QoIs), derived from raw data. This may lead to uncertainties and even misinterpretations in scientific discoveries, significantly limiting the use of lossy compression in practice. In this paper, we propose QPET, a novel, versatile, and portable framework for QoI-preserving error-bounded lossy compression, which overcomes the challenges of modeling diverse QoIs by leveraging numerical strategies. QPET features (1) high portability to multiple existing lossy compressors, (2) versatile preservation to most differentiable univariate and multivariate QoIs, and (3) significant compression improvements in QoI-preservation tasks. Experiments with six real-world datasets demonstrate that integrating QPET into state-of-the-art error-bounded lossy compressors can gain 2x to 10x compression speedups of existing QoI-preserving error-bounded lossy compression solutions, up to 1000% compression ratio improvements to general-purpose compressors, and up to 133% compression ratio improvements to existing QoI-integrated scientific compressors.

cs.DB↗