arXiv subjects

Kai Zhang

Publications and source records attributed to Kai Zhang.

At least 721 records · Page 40Linked to original sources

arXiv2014

A user-friendly nano-CT image alignment and 3D reconstruction platform based on LabVIEW

X-ray computed tomography at the nanometer scale (nano-CT) offers a wide range of applications in scientific and industrial areas. Here we describe a reliable, user-friendly and fast software package based on LabVIEW that may allow to perform all procedures after the acquisition of raw projection images in order to obtain the inner structure of the investigated sample. A suitable image alignment process to address misalignment problems among image series due to mechanical manufacturing errors, thermal expansion and other external factors has been considered together with a novel fast parallel beam 3D reconstruction procedure, developed ad hoc to perform the tomographic reconstruction. Remarkably improved reconstruction results obtained at the Beijing Synchrotron Radiation Facility after the image calibration confirmed the fundamental role of this image alignment procedure that minimizes unwanted blurs and additional streaking artifacts always present in reconstructed slices. Moreover, this nano-CT image alignment and its associated 3D reconstruction procedure fully based on LabVIEW routines, significantly reduce the data post-processing cycle, thus making faster and easier the activity of the users during experimental runs.

cs.CE↗

arXiv2014

Can the packing efficiency of binary hard spheres explain the glass-forming ability of bulk metallic glasses?

We perform molecular dynamics simulations to compress binary hard spheres into jammed packings as a function of the compression rate $R$, size ratio $α$, and number fraction $x_S$ of small particles to determine the connection between the glass-forming ability (GFA) and packing efficiency in bulk metallic glasses (BMGs). We define the GFA by measuring the critical compression rate $R_c$, below which jammed hard-sphere packings begin to form "random crystal" structures with defects. We find that for systems with $α\gtrsim 0.8$ that do not de-mix, $R_c$ decreases strongly with $Δϕ_J$, as $R_c \sim \exp(-1/Δϕ_J^2)$, where $Δϕ_J$ is the difference between the average packing fraction of the amorphous packings and random crystal structures at $R_c$. Systems with $α\lesssim 0.8$ partially de-mix, which promotes crystallization, but we still find a strong correlation between $R_c$ and $Δϕ_J$. We show that known metal-metal BMGs occur in the regions of the $α$ and $x_S$ parameter space with the lowest values of $R_c$ for binary hard spheres. Our results emphasize that maximizing GFA in binary systems involves two competing effects: minimizing $α$ to increase packing efficiency, while maximizing $α$ to prevent de-mixing.

cond-mat.mtrl-sci↗

arXiv2014

Outflow and hot dust emission in broad absorption line quasars

We have investigated a sample of 2099 broad absorption line (BAL) quasars with z=1.7-2.2 built from the Sloan Digital Sky Survey Data Release Seven and the Wide-field Infrared Survey. This sample is collected from two BAL quasar samples in the literature, and refined by our new algorithm. Correlations of outflow velocity and strength with hot dust indicator (beta_NIR) and other quasar physical parameters, such as Eddington ratio, luminosity and UV continuum slope, are explored in order to figure out which parameters drive outflows. Here beta_NIR is the near-infrared continuum slope, a good indicator of the amount of hot dust emission relative to accretion disk emission. We confirm previous findings that outflow properties moderately or weakly depends on Eddington ratio, UV slope and luminosity. For the first time, we report moderate and significant correlations of outflow strength and velocity with beta_NIR in BAL quasars. It is consistent with the behavior of blueshifted broad emission lines in non-BAL quasars. The statistical analysis and composite spectra study both reveal that outflow strength and velocity are more strongly correlated with beta_NIR than Eddington ratio, luminosity and UV slope. In particular, the composites show that the entire C IV absorption profile shifts blueward and broadens as beta_NIR increases, while Eddington ratio and UV slope only affect the high and low velocity part of outflows, respectively. We discuss several potential processes and suggest that dusty outflow scenario, i.e. dust is intrinsic to outflows and may contribute to the outflow acceleration, is most likely. The BAL quasar catalog is available from the authors upon request.

astro-ph.GA↗

arXiv2014

The Broad Wing of [O III] λ5007 Emission Line in Active Galactic Nuclei

We use a type 2 AGN sample from SDSS DR7 in which the [O III] λ5007 emission line can be modeled by two Gaussian components, a broad wing plus a narrow core, to investigate the origin of the broad wing and the connection between the velocity shift of the broad wing and the physical parameters of active galactic nuclei (AGNs) as well as their host galaxies. We find that the flux of the wing components is roughly equal to that of the core components in statistic. However, the velocity shift of the wing component has only weak, if any, correlations with the physical properties of AGNs and the host galaxies such as bolometric luminosity, the Eddington ratio, the mass of supermassive black holes, D4000, HδA or stellar mass. Comparing the velocity shift from our type 2 AGN sample to that from type 1 sample in Zhang et al. (2011), we suggest the [O III] broad wing originates from outflow.

astro-ph.GA↗

arXiv2013

Improved Precision in Estimating Average Treatment Effects

The Average Treatment Effect (ATE) is a global measure of the effectiveness of an experimental treatment intervention. Classical methods of its estimation either ignore relevant covariates or do not fully exploit them. Moreover, past work has considered covariates as fixed. We present a method for improving the precision of the ATE estimate: the treatment and control responses are estimated via a regression, and information is pooled between the groups to produce an asymptotically unbiased estimate; we subsequently justify the random X paradigm underlying the result. Standard errors are derived, and the estimator's performance is compared to the traditional estimator. Conditions under which the regression-based estimator is preferable are detailed, and a demonstration on real data is presented.

stat.ME↗

arXiv2013

Outflow and hot dust emission in high redshift quasars

Correlations of hot dust emission with outflow properties are investigated, based on a large z~2 non-broad absorption lines quasar sample built from the Wide-field Infrared Survey and the Sloan Digital Sky Survey data releases. We use the near infrared slope and the infrared to UV luminosity ratio to indicate the hot dust emission relative to the emission from the accretion disk. In our luminous quasars, these hot dust emission indicators are almost independent of the fundamental parameters, such as luminosity, Eddington ratio and black hole mass, but moderately dependent on the blueshift and asymmetry index (BAI) and full width at half-maximum (FWHM) of CIV lines. Interestingly, the latter two correlations dramatically strengthen with increasing Eddington ratio. We suggest that, in high Eddington ratio quasars, CIV regions are dominated by outflows so the BAI and FWHM(CIV) can reliably reflect the general properties and velocity of outflows, respectively. While in low Eddington ratio quasars, CIV lines are primarily emitted by virialized gas so the BAI and FWHM(CIV) become less sensitive to outflows. Therefore, the correlations for the highest Eddington ratio quasars are more likely to represent the true dependence of hot dust emission on outflows and the correlations for the entire sample are significantly diluted by the low Eddington ratio quasars. Our results show that an outflow with a large BAI or velocity can double the hot dust emission on average. We suggest that outflows either contain hot dust in themselves or interact with the dusty interstellar medium or torus.

astro-ph.CO↗

arXiv2013

Graphene-enhanced, internal-magnetic-field-generated Rabi oscillations in metal-coated Si-SiO2 photoconductive detectors

We report our demonstration of Rabi oscillations in Si-SiO2-Al photoconductive devices with nanosecond laser pulses of a few nJ at room temperature without external magnetic fields. Zeeman splitting of spin quantum states of dopants in silicon is achieved with internal magnetic fields produced by the Al film under excitation of laser pulses. Rabi oscillation frequency is 15 MHz and 25 MHz when photocurrent direction is perpendicular and parallel, respectively, to the propagation direction of linearly-polarized, 532-nm, 7-ns laser pulses. Insertion of graphene buffer layer between Al and SiO2 provides a three-fold enhancement in Rabi oscillation amplitude. This simple-structured, low-cost device operated at room temperature should open a new avenue for future spin-based electronics and optoelectronics.

physics.optics↗

arXiv2013

Valid post-selection inference

It is common practice in statistical data analysis to perform data-driven variable selection and derive statistical inference from the resulting model. Such inference enjoys none of the guarantees that classical statistical theory provides for tests and confidence intervals when the model has been chosen a priori. We propose to produce valid ``post-selection inference'' by reducing the problem to one of simultaneous inference and hence suitably widening conventional confidence and retention intervals. Simultaneity is required for all linear functions that arise as coefficient estimates in all submodels. By purchasing ``simultaneity insurance'' for all possible submodels, the resulting post-selection inference is rendered universally valid under all possible model selection procedures. This inference is therefore generally conservative for particular selection procedures, but it is always less conservative than full Scheffe protection. Importantly it does not depend on the truth of the selected submodel, and hence it produces valid inference even in wrong models. We describe the structure of the simultaneous inference problem and give some asymptotic results.

math.ST↗

arXiv2013

Computational studies of the glass-forming ability of model bulk metallic glasses

Bulk metallic glasses (BMGs) are produced by rapidly thermally quenching supercooled liquid metal alloys below the glass transition temperature at rates much faster than the critical cooling rate R_c below which crystallization occurs. The glass-forming ability of BMGs increases with decreasing R_c, and thus good glass-formers possess small values of R_c. We perform molecular dynamics simulations of binary Lennard-Jones (LJ) mixtures to quantify how key parameters, such as the stoichiometry, particle size difference, attraction strength, and heat of mixing, influence the glass-formability of model BMGs. For binary LJ mixtures, we find that the best glass-forming mixtures possess atomic size ratios (small to large) less than 0.92 and stoichiometries near 50:50 by number. In addition, weaker attractive interactions between the smaller atoms facilitate glass formation, whereas negative heats of mixing (in the experimentally relevant regime) do not change R_c significantly. These studies represent a first step in the development of computational methods for quantitatively predicting glass-formability.

cond-mat.mtrl-sci↗

arXiv2013

Connection Between Mid-Infrared Emission Properties and Narrow Line Region Outflows in Type 1 Active Galactic Nuclei

The location of warm dust producing the Mid-infrared (MIR) emission in Type 1 Active Galactic Nuclei (AGNs) is complex and not yet fully known. We explore this problem by studying how the MIR covering factor (CF_{MIR} =L_{MIR}/L_{bol}) correlates with the fundamental parameters of AGN accretion process (such as L_{bol}, black hole mass MBH, and Eddington ratio L/LEdd) and the properties of narrow emission lines (as represented by [O III] 5007), using large data sets derived from the Sloan Digital Sky Spectroscopic Survey (SDSS) and the Wide Infrared Sky Survey (WISE). Firstly we find that the luminosity of the [O III] wing component (Lwing) correlates more tightly with the continuum luminosity (L5100) than the luminosity of the line core component (Lcore) does, which is in line with our previous conclusion that the wing component, generally blueshifted, originates from the polar outflows in the inner narrow-line region (NLR). We then find that the MIR CF shows the strongest correlation with Lwing/L_{bol} rather than with Lcore/L_{bol} or the above fundamental AGN parameters, and the correlation becomes stronger as the infrared wavelength increases. We also confirm the anti-correlations of CF_{MIR} with L_{bol} and MBH, and the lack of dependence of CF_{MIR} on the Eddington ratio. These results suggest that a large fraction of the warm dust producing MIR emission in AGNs is likely embedded in polar outflows in the NLR instead of in the torus.

astro-ph.CO↗

arXiv2012

The Baldwin effect in the narrow emission lines of AGNs

The anti-correlations between the equivalent widths of emission lines and the continuum luminosity in AGNs, known as the Baldwin effect are well established for broad lines, but are less well studied for narrow lines. In this paper we explore the Baldwin effect of narrow emission lines over a wide range of ionization levels and critical densities using a large sample of broad-line, radio-quiet AGNs taken from Sloan Digital Sky Survey (SDSS) Data Release 4. These type1 AGNs span three orders of magnitude in continuum luminosity. We show that most narrow lines show a similar Baldwin effect slope of about -0.2 while the significant deviations of the slopes for [NII] 6583, [OII] 3727, [NeV] 3425, and the narrow component of Ha can be explained by the influence of metallicity, star-formation contamination and possibly by difference in the shape of the UV-optical continuum. The slopes do not show any correlation with either the ionization potential or the critical density. We show that a combination of 50% variations in continuum near 5100A and a log-normal distribution of observed luminosity can naturally reproduce a constant Baldwin effect slope of -0.2 for all narrow lines. The variations of the continuum could be due to variability, intrinsic anisotropic emission, or an inclination effect.

astro-ph.CO↗

arXiv2012

Efficient Raman Frequency Conversion by Feedbacks of Pump and Stokes Fields

We experimentally demonstrate efficient Raman conversion to respective Stokes and anti-Stokes fields in both pulsed and continuous modes with a Rb-87 atomic vapor cell. The conversion efficiency is about 40-50% for the Stokes field and 20-30% for the anti-Stokes field, respectively. This conversion process is realized with feedback of both the Raman pump and the frequency-converted fields (Stokes or anti-Stokes). The experimental setup is very simple and can be applied easily to produce the light source with larger frequency difference using other Raman media. They may have wide applications in nonlinear optics, atomic physics, quantum optics and precise measurement.

physics.atom-ph↗

arXiv2012

[N]pT ensemble and finite-size scaling study of the GEM-4 critical isostructural transition

First-order transitions of system where both lattice site occupancy and lattice spacing fluctuate, such as cluster crystals, cannot be efficiently studied by traditional simulation methods. These methods necessarily fix one of these two degrees of freedom, but this difficulty is surmounted by the generalized [N]pT ensemble [J. Chem. Phys. 136, 214106 (2012)]. Here it is shown that histogram reweighting and the [N]pT ensemble can be used to study an isostructural transition between cluster crystals of different occupancy in the generalized exponential model of index 4 (GEM-4). Extending this scheme to finite-size scaling studies also allows to accurately determine the critical point parameters and to verify that it belongs to the Ising universality class.

cond-mat.soft↗

arXiv2012

[N]pT Monte Carlo Simulations of the Cluster-Crystal-Forming Penetrable Sphere Model

Certain models with purely repulsive pair interactions can form cluster crystals with multiply-occupied lattice sites. Simulating these models' equilibrium properties is, however, quite challenging. Here, we develop an expanded isothermal-isobaric $[N]pT$ ensemble that surmounts this problem by allowing both particle number and lattice spacing to fluctuate. We apply the method with a Monte Carlo simulation scheme to solve the phase diagram of a prototypical cluster-crystal former, the penetrable sphere model (PSM), and compare the results with earlier theoretical predictions. At high temperatures and densities, the equilibrium occupancy $n_{\mathrm{c}}^{\mathrm{eq}}$ of face-centered cubic (FCC) crystal increases linearly. At low temperatures, although $n_{\mathrm{c}}^{\mathrm{eq}}$ plateaus at integer values, the crystal behavior changes continuously with density. The previously ambiguous crossover around $T\sim0.1$ is resolved.

cond-mat.soft↗

arXiv2012

Reentrant and Isostructural Transitions in a Cluster-Crystal Former

We study the low-temperature behavior of a simple cluster-crystal forming system through simulation. The phase behavior is found to be hybrid between the Gaussian core and penetrable sphere models. The system additionally exhibits a series of reentrant crystallization and melting loops as well as critical isostructural transitions between crystals of different occupancy. Due to the creation and annihilation of lattice sites, the system further shows an unusual and intriguing softening upon compression.

cond-mat.soft↗

arXiv2012

Inductive Kernel Low-rank Decomposition with Priors: A Generalized Nystrom Method

Low-rank matrix decomposition has gained great popularity recently in scaling up kernel methods to large amounts of data. However, some limitations could prevent them from working effectively in certain domains. For example, many existing approaches are intrinsically unsupervised, which does not incorporate side information (e.g., class labels) to produce task specific decompositions; also, they typically work "transductively", i.e., the factorization does not generalize to new samples, so the complete factorization needs to be recomputed when new samples become available. To solve these problems, in this paper we propose an"inductive"-flavored method for low-rank kernel decomposition with priors. We achieve this by generalizing the Nyström method in a novel way. On the one hand, our approach employs a highly flexible, nonparametric structure that allows us to generalize the low-rank factors to arbitrarily new samples; on the other hand, it has linear time and space complexities, which can be orders of magnitudes faster than existing approaches and renders great efficiency in learning a low-rank kernel decomposition. Empirical results demonstrate the efficacy and efficiency of the proposed method.

cs.LG↗

arXiv2012

A New Ensemble of Rate-Compatible LDPC Codes

In this paper, we presented three approaches to improve the design of Kite codes (newly proposed rateless codes), resulting in an ensemble of rate-compatible LDPC codes with code rates varying "continuously" from 0.1 to 0.9 for additive white Gaussian noise (AWGN) channels. The new ensemble rate-compatible LDPC codes can be constructed conveniently with an empirical formula. Simulation results show that, when applied to incremental redundancy hybrid automatic repeat request (IR-HARQ) system, the constructed codes (with higher order modulation) perform well in a wide range of signal-to-noise-ratios (SNRs).

cs.IT↗

arXiv2012

$K^{0}$ and $Σ^$ production in Au+Au collisions at $\sqrt{s_{NN}}=$ 200 GeV and 62.4 GeV

Applying a quark combination model for the hadronization of Quark Gluon Plasma (QGP) and A Relativistic Transport (ART) model for the subsequent hadronic rescattering process, we investigate the production of $K^{*0}$ and $Σ^*$ resonances in central Au+Au collisions at $\sqrt{s_{NN}}=$ 200 GeV and 62.4 GeV. The initial $K^{*0}$ produced via hadronization is higher than the experimental data in the low $p_T$ region and is close to the data at 2-3 GeV/c. We take into account the hadronic rescattering effects which lead to a strong suppression of $K^{*0}$ with low $p_T$, and find that the $p_T$ spectrum of $K^{*0}$ can be well described. According to the suppressed magnitude of $K^{*0}$ yield, the time span of hadronic rescattering stage is estimated to be about 13 fm/c at 200 GeV and 5 fm/c at 62.4 GeV. The $p_T$ spectrum of $Σ^*$ directly obtained by quark combination hadronization in central Au+Au collisions at 200 GeV is in well agreement with the experimental data, which shows a weak hadronic rescattering effects. The elliptic flow v2 of $Σ^*$ in minimum bias Au+Au collisions at 200 GeV and $p_T$ spectrum of $Σ^*$ at lower 62.4 GeV are predicted.

nucl-th↗