arXiv subjects

Kai Yu

Publications and source records attributed to Kai Yu.

At least 55 records · Page 3Linked to original sources

arXiv2026

dots.tts Technical Report

We present dots$.$tts, a 2B-parameter continuous autoregressive text-to-speech (TTS) foundation model that models speech in a continuous latent space. Compared with existing continuous autoregressive models, our key innovations are threefold. First, we train an AudioVAE with multiple objectives to build a semantically structured and prediction-friendly continuous speech space. Second, we use full-history conditioning in the flow-matching head to preserve long-range consistency and reduce drift during generation. Third, we apply reward-free self-corrective post-training to the flow-matching head to further improve robustness and acoustic quality. After being trained on a large-scale multilingual corpus, dots$.$tts achieves the best average performance on Seed-TTS-Eval, with WERs of 0.94%/1.30%/6.60% and SIM scores of 81.0/77.1/79.5 on the zh/en/zh-hard test sets, respectively. Across other benchmarks, dots$.$tts also consistently demonstrates open-source state-of-the-art performance, exhibiting strong generation stability, voice cloning ability, and emotional expressiveness. For efficient inference, we further apply CFG-aware MeanFlow distillation, enabling low-latency speech generation with first-packet latencies of 85/54 ms in output streaming and dual-streaming modes, respectively. To facilitate reproducible research and practical deployment, we release the training and inference code, together with the pretrained, post-trained, and MeanFlow-distilled checkpoints, under the Apache 2.0 license.

cs.SD↗

arXiv2026

Data-DPO: Direct Preference Optimization for Target Model Data Selection in LLM Post-Training

Data selection in supervised fine-tuning aims to select a small set of effective samples from large-scale candidate data, reducing training cost while preserving model performance. However, existing methods usually treat data value as a relatively static property, and pay limited attention to the compatibility between data and the capability distribution of the target model. To address this issue, we propose Data-DPO, a target model-oriented SFT data selection method. Data-DPO observes the local training feedback of the target model on different samples through one-step probing, transforms activation differences among samples into pairwise data preferences, and trains a lightweight reward model to learn target-model-aware data preferences. In the final selection stage, Data-DPO further combines target model preference, external quality scores, and marginal diversity to construct a more stable and effective training subset. Experimental results on Vision-Flan and LLaVA-CoT show that Data-DPO consistently outperforms existing data selection baselines under multiple data budgets and stably surpasses full data training performance.

cs.LG↗

arXiv2026

Hierarchical Data Selection via Manifold Coverage and Sparse Feature Coverage in LLM Post-training

As supervised fine-tuning data continues to scale, selecting high-value subsets from large candidate pools is crucial for reducing training cost and improving model performance. Existing methods often measure diversity directly in the original embedding space, where geometric metrics entangle dominant semantic directions, fine-grained supervision differences, and local noise. We address this limitation by formulating data selection as a coarse-to-fine hierarchical coverage problem and propose MASS. MASS learns low-dimensional principal manifold coordinates with a dense autoencoder for coarse semantic grouping, and then performs quality-aware sparse feature coverage within each group using a TopK sparse autoencoder. Experiments on Vision Flan and LLaVA-CoT show that MASS consistently outperforms strong data selection baselines across multiple budgets, and in several settings matches or surpasses full data training with only a small subset of data.

cs.LG↗

arXiv2026

LightningRL: Breaking the Accuracy-Parallelism Trade-off of Block-wise dLLMs via Reinforcement Learning

Diffusion Large Language Models (dLLMs) have emerged as a promising paradigm for parallel token generation, with block-wise variants garnering significant research interest. Despite their potential, existing dLLMs typically suffer from a rigid accuracy-parallelism trade-off: increasing the number of tokens per forward (TPF) via aggressive parallel decoding often leads to performance degradation and increased generation instability. We identify that this limitation stems from the model's inability to navigate high-parallelism regimes where approximation errors and local corruptions accumulate, ultimately undermining the reliability of parallel generation. To address this, we propose LightningRL, a post-training framework designed to directly optimize the speed-quality Pareto frontier of pre-trained dLLMs. Instead of forcing uniform parallelization, our approach leverages reinforcement learning to identify and reinforce high-parallelism trajectories that maintain generation accuracy. Built upon the Group Relative Policy Optimization (GRPO) framework, LightningRL introduces several enhancements tailored for dLLMs: (1) stabilized training via per-reward decoupled normalization; (2) token-level negative log-likelihood (NLL) regularization on correct trajectories to anchor model performance; and (3) a dynamic sampling strategy with TPF-aware filtering to enhance training efficiency. Experimental results across mathematical and coding benchmarks demonstrate that LightningRL consistently advances the Pareto frontier, achieving competitive task accuracy while significantly increasing parallelism, reaching an average TPF of 7.32 (with a peak of 11.10 on the MBPP dataset). Our code is available at https://github.com/SJTU-DENG-Lab/LightningRL.

cs.LG↗

arXiv2026

AgenticASR: Refining Speech Recognition in Real-World Scenarios via an Agentic Approach

Automatic speech recognition (ASR) has achieved substantial gains in transcription accuracy, yet verbatim transcription does not necessarily produce readily usable text. It retains fillers, repetitions, false starts, and self-corrections that increase reading effort, obscure the speaker's final intent, and propagate unresolved or abandoned content to downstream tasks. Existing spoken-to-written methods process completed audio or transcripts but cannot revise emitted text when later speech changes how preceding content should be interpreted. We therefore formulate Agentic Speech Recognition (AgenticSR), an audio-to-clean-text task that removes disfluencies, resolves self-corrections, and normalizes written form while preserving the speaker's final intent. AgenticASR implements this task through an ASR--Refiner architecture that repeatedly transforms a bounded active context and replaces its corresponding output span as audio arrives. This enables continual emission and revision over streams of arbitrary duration. We also introduce AASR-Bench, a bilingual benchmark with fine-grained atomic rubrics. Across multiple ASR front ends, AgenticASR attains the highest AASR-Bench scores among evaluated systems. A human--AI agreement study shows that rubric-based judgments align with independent expert assessments. Ablations characterize Refiner capacity, context length, and the quality--latency trade-off between online and offline inference. Together, these results establish AgenticASR as a practical framework for intent-preserving clean transcription during ongoing speech. Code, AASR-Bench, and a demo will be released at https://github.com/AnXMuy/AgenticASR.

cs.AI↗

arXiv2026

Towards High-Level Semantic Intelligence

Recent advances in AI have substantially expanded its cognitive and reasoning capabilities. From the perspective of semantic complexity, the development of AI reveals a clear trajectory from simple to complex semantic processing. While early AI systems mainly addressed tasks involving direct and literal semantic perception or expression, contemporary systems are increasingly expected to perform more sophisticated cognitive reasoning, enabling the understanding and generation of High-Level Semantics (HLS). A similar trajectory can also be observed in human cognitive development. We define this transition as the shift from Basic-Level Semantic Intelligence (BLSI) to High-Level Semantic Intelligence (HLSI). However, this issue has not yet been systematically and comprehensively examined in prior work. Motivated by this gap, this survey reviews the development of AI semantic intelligence from the perspective of semantic complexity. We systematically survey existing research on HLS tasks, including humor, sarcasm, metaphor, empathy, persuasion, narrative, and other general HLS phenomena, across text, speech, vision, and multimodal scenarios. Specifically, we summarize data construction methods, modeling and optimization strategies, and evaluation methodologies for both understanding and generation. HLS is essential for advancing AI toward genuinely human-like intelligence. By synthesizing existing methods and insights from the perspective of semantic intelligence, this survey aims to support the continued development of AI toward HLSI.

cs.AI↗

arXiv2026

GigaSpeechBench: A Real-World Multilingual Speech-to-Text Benchmark

While modern ASR systems achieve low error rates on high-resource benchmarks, such performance often overestimates real-world robustness. Existing evaluations address challenges in isolation, lacking a unified benchmark for domain terminology, age variation, dialects, accents, and low-resource languages, particularly across the Middle East and Southeast Asia, representing over one billion under-evaluated speakers. To address this gap, we introduce GigaSpeechBench, a comprehensive multilingual and multidimensional in-the-wild ASR & AST benchmark comprising 680 hours of human-annotated speech. It features five modules: (1) 12 low-resource Middle Eastern and Southeast Asian languages, plus challenging Japanese and Korean; (2) 6 Chinese dialects; (3) 6 English accents; (4) dense terminology across 12 vertical domains for Chinese and English; and (5) older adult and child speech. We further provide human-annotated Chinese and English translations for 11 languages to support AST evaluation. Extensive evaluations of leading foundation models and commercial APIs reveal significant performance degradation in these challenging settings, exposing critical evaluation blind spots.

eess.AS↗

arXiv2026

X-Translator: A Real-Time Multilingual Speaker-Aware Speech-to-Speech Translation System

Real-time speech-to-speech translation (S2ST) systems must balance translation quality, latency, speech naturalness, and speaker consistency. Publicly documented S2ST systems have advanced direct, multilingual, streaming, and expressive modeling, while proprietary products and APIs increasingly expose real-time translation capabilities to users. However, practical deployment remains challenging for open and reproducible systems, especially in long-form and multi-speaker conversations where partial ASR hypotheses are unstable, turn boundaries are ambiguous, and target speech must be generated with an appropriate speaker prompt. We present X-Translator, a low-cost modular cascaded S2ST system that combines streaming ASR, machine translation, and prompt-conditioned TTS through a session-level runtime controller. The system uses incremental segment commitment to convert unstable ASR streams into translation-ready units, and an online speaker prompt manager to bind source speech spans to speaker-specific voice prompts for synthesis. We evaluate translation, speech quality, and latency with OpenSTBench, compare against proprietary speech translation APIs as behavioral baselines, measure long-form voice stability, evaluate speaker preservation in multi-speaker conversations, and assess multilingual translation quality. X-Translator provides an open platform for understanding the practical trade-offs of deployment-oriented S2ST. Code and demo are available at https://github.com/zhaoyx239/X-Translator.

eess.AS↗

arXiv2026

Fronthaul-Efficient Distributed Cooperative 3D Positioning with Quantized Latent CSI Embeddings

High-precision three-dimensional (3D) positioning in dense urban non-line-of-sight (NLOS) environments benefits significantly from cooperation among multiple distributed base stations (BSs). However, forwarding raw CSI from multiple BSs to a central unit (CU) incurs prohibitive fronthaul overhead, which limits scalable cooperative positioning in practice. This paper proposes a learning-based edge-cloud cooperative positioning framework under limited-capacity fronthaul constraints. In the proposed architecture, a neural network is deployed at each BS to compress the locally estimated CSI into a quantized representation subject to a fixed fronthaul payload. The quantized CSI is transmitted to the CU, which performs cooperative 3D positioning by jointly processing the compressed CSI received from multiple BSs. The proposed framework adopts a two-stage training strategy consisting of self-supervised local training at the BSs and end-to-end joint training for positioning at the CU. Simulation results based on a 3.5~GHz 5G NR compliant urban ray-tracing scenario with six BSs and 20~MHz bandwidth show that the proposed method achieves a mean 3D positioning error of 0.48~m and a 90th-percentile error of 0.83~m, while reducing the fronthaul payload to 6.25% of lossless CSI forwarding. The achieved performance is close to that of cooperative positioning with full CSI exchange.

eess.SP↗

arXiv2026

Distributed Agent System: Fault-Tolerant Collaboration Among Embodied Agents

AI engineering is shifting from passive text generation by large language models (LLMs) to agent-driven task execution, creating new reliability challenges for long-horizon tasks under resource constraints and environmental uncertainty. Conventional error-elimination optimization strategies fail to address cumulative error propagation. This paper proposes Distributed Agent System (DAS), a device-edge-cloud framework for fault-tolerant collaboration among heterogeneous agents. We redefine agent reliability as system-level fault tolerance rather than single-turn zero-error accuracy, and present a two-layer fault-tolerance architecture: single-agent execution reliability via fault-tolerant alignment, and cross-agent communication reliability via semi-formal language protocols. This framework provides a practical engineering pathway for reliable heterogeneous embodied agents collaboration in industrial scenarios.

cs.MA↗

arXiv2026

Reward Lightning: Fast Video Generation via Homologous Preference Distillation

Achieving simultaneous preference alignment and distillation acceleration in video diffusion models remains an open challenge. Existing methods optimize the two objectives over mismatched representation spaces, where improving one objective often compromises the other. To overcome this, we propose Reward Lightning, a unified framework that aligns and accelerates a video diffusion model within a single shared representation. Its central principle is homology: both objectives are evaluated on identical latent features, which mitigates the gradient conflicts that arise when they are optimized over disjoint representations. As a foundational component, we first introduce a latent reward model (LRM) that scores videos directly in the latent space, without decoding back to the pixel space. Building on the LRM, homologous preference distillation (HPD) reuses this shared backbone to perform adversarial distillation and preference alignment jointly, yielding few-step generators that remain faithful and well aligned. Extensive experiments demonstrate that the LRM surpasses pixel-level and latent-level reward baselines by $11.0\%$ and $14.7\%$ in preference accuracy, and that Reward Lightning generates high-fidelity videos in merely $1$ to $4$ steps, improving the average VBench score by $2.1\%$ while leading in text alignment, motion quality, and visual quality. Project page: https://reward-lightning.github.io.

cs.CV↗

arXiv2026

Multi-Block Diffusion Language Models

Block Diffusion Language Models (BD-LMs) improve diffusion-based text generation with KV caching and flexible-length generation. A natural next step is to extend them from Single-Block Diffusion (SingleBD) to Multi-Block Diffusion (MultiBD), where a running-set of consecutive blocks is decoded concurrently for inter-block parallelism. However, existing BD-LMs are mostly trained under teacher forcing, where the model observes only one noisy block conditioned on a clean prefix. While the recent diffusion forcing strategy introduces visibility among multiple noisy blocks, its training states still differ from MultiBD inference, where decoding operates on a bounded running-set with heterogeneous slot-wise noise patterns. To bridge this gap, we propose Multi-Block Diffusion Language Models (MBD-LMs), obtained by post-training BD-LMs with Multi-block Teacher Forcing (MultiTF). MultiTF integrates teacher forcing and diffusion forcing by training on bounded noise-groups conditioned on clean prefixes, with randomized noise-schedulers that better match MultiBD inference states. To make MultiBD practically executable, we further introduce an optimized decoding algorithm based on the Block Buffer mechanism that preserves prefix-cache reuse, keeps input shapes static, and translates increased decoding parallelism into wall-clock acceleration. Empirically, MBD-LLaDA2-Mini increases average Tokens Per Forward pass (TPF) from 3.47 to 6.19 and improves average accuracy from 79.95% to 81.03%; when combined with DMax, MBD-LLaDA2-Mini-DMax reaches an average TPF of 9.34 with only a 1.02% accuracy drop on math and code benchmarks.

cs.LG↗

arXiv2026

Logarithmic stability for determining the damping coefficient for the time-fractional damped wave equation

This paper investigates the inverse problem of determining the spatially dependent damping coefficient in a time-fractional damped wave equation, where the damping term is given by a Caputo derivative of order $α\in(0,1)$. We first prove the well-posedness of the direct problem in exponentially weighted Sobolev spaces. Then, by means of the Fourier--Laplace transform in time, the nonstationary problem is reduced to a family of stationary elliptic equations with complex frequencies. Based on complex geometrical optics solutions and a suitable integral identity, we estimate the Fourier transform of the difference of two damping coefficients in terms of the difference of their Dirichlet-to-Neumann maps. Combining low-frequency estimates with a high-frequency decay argument, we obtain a conditional logarithmic stability result.

math.AP↗

arXiv2026

XFlow: An Executable Protocol Programming System for Reliable Multi-Agent Workflows

LLM-based multi-agent systems increasingly coordinate planning, reasoning, tool use, and human interaction, yet their reliability remains limited. A central source of this limitation is the underspecified prompt--harness boundary. Current systems lack a principled way to decide which workflow commitments should remain in prompts and which should become harness structure. We present \textbf{XFlow}, an executable protocol programming system for reliable multi-agent workflows, and \textbf{XPF} (XFlow Protocol Format), its domain-specific protocol programming language. XFlow occupies a middle position between prompt-only orchestration and markup-like workflow descriptions. XPF remains readable as a literate protocol, but it is compiled and executed as a program. Its design keeps informal semantic work inside actors while moving selected commitments into harness structure that can be checked, preserved, and enforced. At runtime, XFlow stages uncertainty through lifecycle-governed symbols, which are typed state cells with validation and commit states. Actor outputs are mediated before they become shared state, instead of spreading through prompts, transcripts, or implicit memory. Our experiments cover Constrained Interaction, Long-Context Reasoning, and Agentic Software Engineering. They show that XFlow improves reliability by making constraints, evidence handling, and process requirements explicit and enforceable.

cs.PL↗

arXiv2026

RAS: a Reliability Oriented Metric for Automatic Speech Recognition

Automatic speech recognition systems often produce confident yet incorrect transcriptions under noisy or ambiguous conditions, which can be misleading for both users and downstream applications. Standard evaluation based on Word Error Rate focuses solely on accuracy and fails to capture transcription reliability. We introduce an abstention-aware transcription framework that enables ASR models to explicitly abstain from uncertain segments. To evaluate reliability under abstention, we propose RAS, a reliability-oriented metric that balances transcription informativeness and error aversion, with its trade-off parameter calibrated by human preference. We then train an abstention-aware ASR model through supervised bootstrapping followed by reinforcement learning. Our experiments demonstrate substantial improvements in transcription reliability while maintaining competitive accuracy.

cs.SD↗

arXiv2026

Detect, Attend and Extract: Keyword Guided Target Speaker Extraction

Target speaker extraction (TSE) aims to extract the speech of a target speaker from mixtures containing multiple competing speakers. Conventional TSE systems predominantly rely on speaker cues, such as pre-enrolled speech, to identify and isolate the target speaker. However, in many practical scenarios, clean enrollment utterances are unavailable, limiting the applicability of existing approaches. In this work, we propose DAE-TSE, a keyword-guided TSE framework that specifies the target speaker through distinct keywords they utter. By leveraging keywords (i.e., partial transcriptions) as cues, our approach provides a flexible and practical alternative to enrollment-based TSE. DAE-TSE follows the Detect-Attend-Extract (DAE) paradigm: it first detects the presence of the given keywords, then attends to the corresponding speaker based on the keyword content, and finally extracts the target speech. Experimental results demonstrate that DAE-TSE outperforms standard TSE systems that rely on clean enrollment speech. To the best of our knowledge, this is the first study to utilize partial transcription as a cue for specifying the target speaker in TSE, offering a flexible and practical solution for real-world scenarios. Our code and demo page are now publicly available.

eess.AS↗

arXiv2026

IEA: Amateur-Friendly Conversational Image Editing Agent via Three Stages of Multitask Alignment

Current image editing software often hinges on fixed filters or expert tuning, leaving a gap between amateur users' intent and outcomes. Creations by generative models may contain artifacts, implausible details, or stylistic drift away from photorealism and offer little insight into why an edit was made. We propose IEA, a conversational Image Editing Agent that learns to operate parameterized tools in an explicit, interpretable action space. IEA is trained via a three-stage multitask pipeline: (1) SFT on distilled expert edits, (2) GRPO with rewards for likeness improvement, tool usefulness, and intent summarization, and (3) large-scale synthetic fine-tuning to jointly master image editing, refinement, and user intent summarization. By manipulating 16 editing tools step by step, IEA produces transparent edit traces that can be inspected and debugged. In quantitative experiments, it attains a lower pixel distance on the edit task and a higher ROUGE-L on the summary task than strong baselines. In user studies, it ranks best among tool-calling methods for instruction following while surpassing generative methods in overall perceptual quality. Our results validate interpretable, tool-centric VLMs as a reliable path to human instruction-guided image retouching.

cs.CV↗

arXiv2026

MMAE: A Massive Multitask Audio Editing Benchmark

We introduce MMAE, a Massive Multitask Audio Editing benchmark, serving as the first comprehensive evaluation testbed designed for general-purpose instruction-based audio editing. Spurred by the shift toward intelligent creation, interactive editing has rapidly expanded from visual domains, pioneered by models like Nano-banana 2 for images and Gemini-Omni for video, into audio. However, the current evaluation infrastructure lags severely, remaining highly fragmented and restricted to specific subdomains or basic operations. Unlike existing benchmarks that are limited in scope, MMAE extends to a broad spectrum of real-world scenarios, encompassing 7 distinct audio modalities, including sound, speech, music, and their mixtures. Furthermore, we establish a comprehensive taxonomy spanning 6 levels of task complexity, from basic modifications to multi-hop reasoning and multi-round editing, 2 levels of granularity, and 8 distinct operation types. Meticulously curated through human-agent collaboration, MMAE comprises 2,000 high-fidelity samples paired with a pioneering rubric-based evaluation framework. By decomposing free-form tasks into 17,741 verifiable criteria, this robust rubric-based paradigm enables a precise, multi-dimensional assessment of both instruction following and context consistency. Our extensive evaluation of leading models reveals that current systems remain far from achieving reliable edits. Strikingly, the Exact Match Rate (EMR) consistently falls below 5% and plummets to an absolute 0% in complex, mixed-modality tasks, exposing critical bottlenecks in precise execution and structural robustness. We hope MMAE will serve as a catalyst for future advances in the intelligent creation community, providing a clear diagnostic roadmap and establishing a standardized, long-lasting evaluation paradigm for next-generation audio editing systems.

cs.SD↗