arXiv subjects

K. Mustapha

Publications and source records attributed to K. Mustapha.

6 recordsLinked to original sources

arXiv2025

Bayesian inference calibration of the modulus of elasticity

This work uses the Bayesian inference technique to infer the Young modulus from the stochastic linear elasticity equation. The Young modulus is modeled by a finite Karhunen Loéve expansion, while the solution to the linear elasticity equation is approximated by the finite element method. The high-dimensional integral involving the posterior density and the quantity of interest is approximated by a higher-order quasi-Monte Carlo method.

math.NA↗

arXiv2025

A simple modification to mitigate locking in conforming FEM for nearly incompressible elasticity

Due to the divergence-instability, the accuracy of low-order conforming finite element methods (FEMs) for nearly incompressible elasticity equations deteriorates as the Lamé parameter $λ\to\infty$, or equivalently as the Poisson ratio $ν\to1/2$. This effect is known as {\itshape locking} or {\itshape non-robustness}. For the piecewise linear case, the error in the ${\bf L}^2$-norm of the standard Galerkin conforming FEM is bounded by~$Cλh^2$, resulting in poor accuracy for practical values of~$h$ if $λ$ is sufficiently large. In this short paper, we show that the locking phenomenon can be reduced by replacing $λ$ with~$λ_h=λμ/(μ+λh/L)<λ$ in the stiffness matrix, where $μ$ is the second Lamé parameter and $L$ is the diameter of the body $Ω$. We prove that with this modification, the error in the ${\bf L}^2$-norm is bounded by $Ch$ for a constant $C$ that does not depend on $λ$. Numerical experiments confirm this convergence behaviour and show that, for practical meshes, our method is more accurate than the standard method if $λ$ is larger than about $μL/h$. Our analysis also shows that the error in the ${\bf H}^1$-norm is bounded by $Cλ_h^{1/2}\,h$, which improves the $Cλ^{1/2}\,h$ estimate for the case of conforming FEM.

math.NA↗

arXiv2024

Quasi-Monte Carlo sparse grid Galerkin finite element methods for linear elasticity equations with uncertainties

We explore a linear inhomogeneous elasticity equation with random Lamé parameters. The latter are parameterized by a countably infinite number of terms in separated expansions. The main aim of this work is to estimate expected values (considered as an infinite dimensional integral on the parametric space corresponding to the random coefficients) of linear functionals acting on the solution of the elasticity equation. To achieve this, the expansions of the random parameters are truncated, a high-order quasi-Monte Carlo (QMC) is combined with a sparse grid approach to approximate the high dimensional integral, and a Galerkin finite element method (FEM) is introduced to approximate the solution of the elasticity equation over the physical domain. The error estimates from (1) truncating the infinite expansion, (2) the Galerkin FEM, and (3) the QMC sparse grid quadrature rule are all studied. For this purpose, we show certain required regularity properties of the continuous solution with respect to both the parametric and physical variables. To achieve our theoretical regularity and convergence results, some reasonable assumptions on the expansions of the random coefficients are imposed. Finally, some numerical results are delivered.

math.NA↗

arXiv2024

High-order QMC nonconforming FEMs for nearly incompressible planar stochastic elasticity equations

In a recent work (Dick et al, arXiv:2310.06187), we considered a linear stochastic elasticity equation with random Lamé parameters which are parameterized by a countably infinite number of terms in separate expansions. We estimated the expected values over the infinite dimensional parametric space of linear functionals ${\mathcal L}$ acting on the continuous solution $\vu$ of the elasticity equation. This was achieved by truncating the expansions of the random parameters, then using a high-order quasi-Monte Carlo (QMC) method to approximate the high dimensional integral combined with the conforming Galerkin finite element method (FEM) to approximate the displacement over the physical domain $Ω.$ In this work, as a further development of aforementioned article, we focus on the case of a nearly incompressible linear stochastic elasticity equation. To serve this purpose, in the presence of stochastic inhomogeneous (variable Lamé parameters) nearly compressible material, we develop a new locking-free symmetric nonconforming Galerkin FEM that handles the inhomogeneity. In the case of nearly incompressible material, one known important advantage of nonconforming approximations is that they yield optimal order convergence rates that are uniform in the Poisson coefficient. Proving the convergence of the nonconforming FEM leads to another challenge that is summed up in showing the needed regularity properties of $\vu$. For the error estimates from the high-order QMC method, which is needed to estimate the expected value over the infinite dimensional parametric space of ${\mathcal L}\vu,$ we %rely on (Dick et al. 2022). We are required here to show certain regularity properties of $\vu$ with respect to the random coefficients. Some numerical results are delivered at the end.

math.NA↗

arXiv2018

A finite difference method for space fractional differential equations with variable diffusivity coefficient

Anomalous diffusion is a phenomenon that cannot be modeled accurately by second-order diffusion equations, but is better described by fractional diffusion models. The nonlocal nature of the fractional diffusion operators makes substantially more difficult the mathematical analysis of these models and the establishment of suitable numerical schemes. This paper proposes and analyzes the first finite difference method for solving {\em variable-coefficient} fractional differential equations, with two-sided fractional derivatives, in one-dimensional space. The proposed scheme combines first-order forward and backward Euler methods for approximating the left-sided fractional derivative when the right-sided fractional derivative is approximated by two consecutive applications of the first-order backward Euler method. Our finite difference scheme reduces to the standard second-order central difference scheme in the absence of fractional derivatives. The existence and uniqueness of the solution for the proposed scheme are proved, and truncation errors of order $h$ are demonstrated, where $h$ denotes the maximum space step size. The numerical tests illustrate the global $O(h)$ accuracy of our scheme, except for nonsmooth cases which, as expected, have deteriorated convergence rates.

math.NA↗

arXiv2015

A discontinuous Galerkin method for time fractional diffusion equations with variable coefficients

We propose a piecewise-linear, time-stepping discontinuous Galerkin method to solve numerically a time fractional diffusion equation involving Caputo derivative of order $μ\in (0,1)$ with variable coefficients. For the spatial discretization, we apply the standard piecewise linear continuous Galerkin method. Well-posedness of the fully discrete scheme and error analysis will be shown. For a time interval~$(0,T)$ and a spatial domain~$Ω$, our analysis suggest that the error in $L^2\bigr((0,T),L^2(Ω)\bigr)$-norm is of order $O(k^{2-\fracμ{2}}+h^2)$ (that is, short by order $\fracμ{2}$ from being optimal in time) where $k$ denotes the maximum time step, and $h$ is the maximum diameter of the elements of the (quasi-uniform) spatial mesh. However, our numerical experiments indicate optimal $O(k^{2}+h^2)$ error bound in the stronger $L^\infty\bigr((0,T),L^2(Ω)\bigr)$-norm. Variable time steps are used to compensate the singularity of the continuous solution near $t=0$.

math.NA↗