arXiv subjects

K. Inayoshi

Publications and source records attributed to K. Inayoshi.

11 recordsLinked to original sources

arXiv2025

Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs) XXII. Chandra observations of narrow-line quasar candidates at z>6

We report on Chandra X-ray observations of four narrow-line quasar candidates at z~6, selected from the SHELLQs project, based on the Subaru Hyper Suprime-Cam survey. These objects are characterised by narrow (FWHM<310 km/s), luminous (>1e44 erg/s) Lya and faint UV continuum (M_1450 = -22 - -21), prompting us to examine whether they are obscured luminous AGN at the epoch of reionization. However, none of these objects were detected by Chandra, giving an upper limit to their rest-frame 2-10 keV luminosity (Lx) of 2e44 erg/s (2 sigma), assuming a spectral slope Gamma=2. Subsequent rest-frame optical spectroscopy of these objects by the JWST-NIRSpec, presented in a companion paper, show weak broad Balmer emission at the base of narrow cores. With the scaling relation for low-redshift AGN, the observed strong [OIII]5007 flux of these sources would predict Lx to be around 1e45 erg/s, which is well above the Chandra upper limits. These optical spectra and X-ray quietness are reminiscent of JWST-selected broad-line AGN. We attribute the weak broad Balmer emission to the broad-line regions hidden partially by optically-thick obscuring matter which also hides the optical and X-ray continuum emission from the accretion disc. Compton-thick obscuration, which would strongly suppress X-ray emission, could be due to a dense inter-stellar medium that is often present in galaxies at high redshifts. Alternatively, the same effect could be obtained from an inflated disc at the innermost radii in a supercritical accretion flow, when the disc is viewed at inclined angles.

astro-ph.GA↗

arXiv2022

Input optics systems of the KAGRA detector during O3GK

KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensity and frequency stabilization systems, modulators, a Faraday isolator, mode-matching telescopes, and a high-power beam dump. These optics were successfully delivered to the KAGRA interferometer and operated stably during the observations. The laser frequency noise was observed to limit the detector sensitivity above a few kHz, whereas the laser intensity did not significantly limit the detector sensitivity.

gr-qc↗

arXiv2022

Noise subtraction from KAGRA O3GK data using Independent Component Analysis

In April 2020, KAGRA conducted its first science observation in combination with the GEO~600 detector (O3GK) for two weeks. According to the noise budget estimation, suspension control noise in the low frequency band and acoustic noise in the middle frequency band are identified as the dominant contribution. In this study, we show that such noise can be reduced in offline data analysis by utilizing a method called Independent Component Analysis (ICA). Here the ICA model is extended from the one studied in iKAGRA data analysis by incorporating frequency dependence while linearity and stationarity of the couplings are still assumed. By using optimal witness sensors, those two dominant contributions are mitigated in the real observational data. We also analyze the stability of the transfer functions for whole two weeks data in order to investigate how the current subtraction method can be practically used in gravitational wave search.

astro-ph.IM↗

arXiv2022

Performance of the KAGRA detector during the first joint observation with GEO 600 (O3GK)

KAGRA, the kilometer-scale underground gravitational-wave detector, is located at Kamioka, Japan. In April 2020, an astrophysics observation was performed at the KAGRA detector in combination with the GEO 600 detector; this observation operation is called O3GK. The optical configuration in O3GK is based on a power recycled Fabry-P\'{e}rot Michelson interferometer; all the mirrors were set at room temperature. The duty factor of the operation was approximately 53%, and the strain sensitivity was $3\times10^{-22}~/\sqrt{\rm{Hz}}$ at 250 Hz. In addition, the binary-neutron-star (BNS) inspiral range was approximately 0.6 Mpc. The contributions of various noise sources to the sensitivity of O3GK were investigated to understand how the observation range could be improved; this study is called a "noise budget". According to our noise budget, the measured sensitivity could be approximated by adding up the effect of each noise. The sensitivity was dominated by noise from the sensors used for local controls of the vibration isolation systems, acoustic noise, shot noise, and laser frequency noise. Further, other noise sources that did not limit the sensitivity were investigated. This paper provides a detailed account of the KAGRA detector in O3GK including interferometer configuration, status, and noise budget. In addition, strategies for future sensitivity improvements such as hardware upgrades, are discussed.

astro-ph.IM↗

arXiv2021

Light, medium-weight or heavy? The nature of the first supermassive black hole seeds

Observations of hyper-luminous quasars at $z>6$ reveal the rapid growth of supermassive black holes (SMBHs $>10^9 \rm M_{\odot}$) whose origin is still difficult to explain. Their progenitors may have formed as remnants of massive, metal free stars (light seeds), via stellar collisions (medium-weight seeds) and/or massive gas clouds direct collapse (heavy seeds). In this work we investigate for the first time the relative role of these three seed populations in the formation of $z>6$ SMBHs within an Eddington-limited gas accretion scenario. To this aim, we implement in our semi-analytical data-constrained model a statistical description of the spatial fluctuations of Lyman-Werner (LW) photo-dissociating radiation and of metal/dust enrichment. This allows us to set the physical conditions for BH seeds formation, exploring their relative birth rate in a highly biased region of the Universe at $z>6$. We find that the inclusion of medium-weight seeds does not qualitatively change the growth history of the first SMBHs: although less massive seeds ($<10^3 \rm M_\odot$) form at a higher rate, the mass growth of a $\sim 10^9 \rm M_\odot$ SMBH at $z<15$ is driven by efficient gas accretion (at a sub-Eddington rate) onto its heavy progenitors ($10^5 \rm M_\odot$). This conclusion holds independently of the critical level of LW radiation and even when medium-weight seeds are allowed to form in higher metallicity galaxies, via the so-called super-competitive accretion scenario. Our study suggests that the genealogy of $z \sim 6$ SMBHs is characterized by a rich variety of BH progenitors, which represent only a small fraction ($< 10 - 20\%$) of all the BHs that seed galaxies at $z > 15$.

astro-ph.GA↗

arXiv2020

Overview of KAGRA: Calibration, detector characterization, physical environmental monitors, and the geophysics interferometer

KAGRA is a newly built gravitational wave observatory, a laser interferometer with a 3 km arm length, located in Kamioka, Gifu, Japan. In this series of articles, we present an overview of the baseline KAGRA, for which we finished installing the designed configuration in 2019. This article describes the method of calibration (CAL) used for reconstructing gravitational wave signals from the detector outputs, as well as the characterization of the detector (DET). We also review the physical environmental monitors (PEM) system and the geophysics interferometer (GIF). Both are used for characterizing and evaluating the data quality of the gravitational wave channel. They play important roles in utilizing the detector output for gravitational wave searches. These characterization investigations will be even more important in the near future, once gravitational wave detection has been achieved, and in using KAGRA in the gravitational wave astronomy era.

gr-qc↗

arXiv2020

Overview of KAGRA : KAGRA science

KAGRA is a newly build gravitational-wave observatory, a laser interferometer with 3 km arm length, located in Kamioka, Gifu, Japan. In this paper in the series of KAGRA-featured articles, we discuss the science targets of KAGRA projects, considering not only the baseline KAGRA (current design) but also its future upgrade candidates (KAGRA+) for the near to middle term (~5 years).

gr-qc↗

arXiv2020

Overview of KAGRA: Detector design and construction history

KAGRA is a newly built gravitational-wave telescope, a laser interferometer comprising arms with a length of 3\,km, located in Kamioka, Gifu, Japan. KAGRA was constructed under the ground and it is operated using cryogenic mirrors that help in reducing the seismic and thermal noise. Both technologies are expected to provide directions for the future of gravitational-wave telescopes. In 2019, KAGRA finished all installations with the designed configuration, which we call the baseline KAGRA. In this occasion, we present an overview of the baseline KAGRA from various viewpoints in a series of of articles. In this article, we introduce the design configurations of KAGRA with its historical background.

physics.ins-det↗

arXiv2019

An arm length stabilization system for KAGRA and future gravitational-wave detectors

Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, which is compatible with the interferometers having long arms like the next generation GW detectors. The features of the new ALS are that the control configuration is simpler than those of previous ones and that it is not necessary to lay optical fibers for the ALS along the kilometer-long arms of the detector. Along with simulations of its noise performance, an experimental test of the new ALS was performed utilizing a single arm cavity of KAGRA. This paper presents the first results of the test where we demonstrated that lock acquisition of the arm cavity was achieved using the new ALS and residual noise was measured to be $8.2\,\mathrm{Hz}$ in units of frequency, which is smaller than the linewidth of the arm cavity and thus low enough to lock the full interferometer of KAGRA in a repeatable and reliable manner.

physics.ins-det↗

arXiv2019

Application of the independent component analysis to the iKAGRA data

We apply the independent component analysis (ICA) to the real data from a gravitational wave detector for the first time. Specifically we use the iKAGRA data taken in April 2016, and calculate the correlations between the gravitational wave strain channel and 35 physical environmental channels. Using a couple of seismic channels which are found to be strongly correlated with the strain, we perform ICA. Injecting a sinusoidal continuous signal in the strain channel, we find that ICA recovers correct parameters with enhanced signal-to-noise ratio, which demonstrates usefulness of this method. Among the two implementations of ICA used here, we find the correlation method yields the optimal result for the case environmental noises act on the strain channel linearly.

astro-ph.IM↗

arXiv2017

Rapid growth of black holes accompanied with hot or warm outflows exposed to anisotropic super-Eddington radiation

We perform two-dimensional radiation hydrodynamical simulations of accretion flows onto a black hole (BH) with a mass of $10^3\leq M_{\rm BH}/M_{\odot} \lesssim 10^6$ in order to study rapid growth of BHs in the early Universe. For spherically symmetric flows, hyper-Eddington accretion onto the BH from outside the Bondi radius can occur unimpeded by radiation feedback only when the BH mass is higher than $\simeq 10^4~M_{\odot}(n_\infty/10^5~{\rm cm}^{-3})^{-1}(T_\infty/10^4~{\rm K})^{3/2}$, where $n_\infty$ and $T_\infty$ are the density and temperature of ambient gas. Here, we study the properties of accretion flows exposed to anisotropic radiation from a nuclear accretion disk with a luminosity higher than the Eddington value ($L_{\rm Edd}$) due to collimation toward the bipolar directions. We find that, unlike the spherically symmetric case, even less massive BHs with $M_{\rm BH} < 10^4~M_{\odot}$ can be fed by surrounding gas at high accretion rates of $\gtrsim L_{\rm Edd}/c^2$ through the equatorial plane, while ionized regions expand to the polar directions producing hot outflows with $T\sim 10^5$K. For more massive BHs with $M_{\rm BH}\gtrsim 5\times 10^5~M_{\odot}$, neutral gas through the equatorial plane totally covers the central radiating region due to the non-radial gas motions, and thus the emergent radiation in all directions is blocked. Because of efficient recombination by hydrogen, the entire flow results in neutral and warm gas with $T \simeq 8000~{\rm K}$ . The central BH is fed through the equator at the averaged rate of $\sim 5\times 10^4~L_{\rm Edd}/c^2$, which corresponds to $\sim 50~\%$ of the inflow rate from the Bondi radius. Moreover, radiation momentum absorbed by neutral hydrogen produces warm outflows toward the bipolar directions at $\sim 30~\%$ of the BH feeding rate and with a typical velocity of $\simeq 50~{\rm km~s}^{-1}$.

astro-ph.HE↗