arXiv subjects

K. Binder

Publications and source records attributed to K. Binder.

At least 19 recordsLinked to original sources

arXiv2019

Finite size scaling for a first order transition where a continuous symmetry is broken: The spin-flop transition in the 3D XXZ Heisenberg antiferromagnet

Finite size scaling for a first order phase transition where a continuous symmetry is broken is developed using an approximation of Gaussian probability distributions with a phenomenological "degeneracy" factor included. Predictions are compared with data from Monte Carlo simulations of the three-dimensional, XXZ Heisenberg antiferromagnet in a field in order to study the finite size behavior on a $L \times L \times L$ simple cubic lattice for the first order "spin-flop" transition between the Ising-like antiferromagnetic state and the canted, XY-like state. Our theory predicts that for large linear dimension $L$ the field dependence of all moments of the order parameters as well as the fourth-order cumulants exhibit universal intersections. Corrections to leading order should scale as the inverse volume. The values of these intersections at the spin-flop transition point can be expressed in terms of a factor $q$ that characterizes the relative degeneracy of the ordered phases. Our theory yields $q=\pi$, and we present numerical evidence that is compatible with this prediction. The agreement between the theory and simulation implies a heretofore unknown universality can be invoked for first order phase transitions.

physics.comp-ph↗

arXiv2014

Magnetic order and electromagnon excitations in DyMnO3 studied by neutron scattering experiments

Magnetic order and excitations in multiferroic DyMnO3 were studied by neutron scattering experiments using a single crystal prepared with enriched 162Dy isotope. The ordering of Mn moments exhibits pronounced hysteresis arising from the interplay between Mn and Dy magnetism which possesses a strong impact on the ferroelectric polarization. The magnon dispersion resembles that reported for TbMnO3. We identify the excitations at the magnetic zone center and near the zone boundary in the b direction, which can possess electromagnon character. The lowest frequency of the zone-center magnons is in good agreement with a signal in a recent optical measurement so that this mode can be identified as the electromagnon coupled by the same Dzyaloshinski-Moriya interaction as the static multiferroic phase.

cond-mat.str-el↗

arXiv2013

Mixtures of anisotropic and spherical colloids: Phase behavior, confinement, percolation phenomena and kinetics

Purely entropic systems such as suspensions of hard rods, platelets and spheres show rich phase behavior. Rods and platelets have successfully been used as models to predict the equilibrium properties of liquid crystals for several decades. Over the past years hard particle models have also been studied in the context of non-equilibrium statistical mechanics, in particular regarding the glass transition, jamming, sedimentation and crystallization. Recently suspensions of hard anisotropic particles also moved into the focus of materials scientists who work on conducting soft matter composites. An insulating polymer resin that is mixed with conductive filler particles becomes conductive when the filler percolates. In this context the mathematical topic of connectivity percolation finds an application in modern nano-technology. In this article, we briefly review recent work on the phase behavior, confinement effects, percolation transition and phase transition kinetics in hard particle models. In the first part, we discuss the effects that particle anisotropy and depletion have on the percolation transition. In the second part, we present results on the kinetics of the liquid-to-crystal transition in suspensions of spheres and of ellipsoids.

cond-mat.soft↗

arXiv2013

The escape transition of a compressed star polymer: Self-consistent field predictions tested by simulation

The escape transition of a polymer "mushroom" (a flexible chain grafted to a flat non-adsorbing substrate surface in a good solvent) occurs when the polymer is compressed by a cylindrical piston of radius $R$, that by far exceeds the chain gyration radius. At this transition, the chain conformation abruptly changes from a two-dimensional self-avoiding walk of blobs (of diameter $H$, the height of the piston above the substrate) to a "flower conformation", i.e. stretched almost one-dimensional string of blobs (with end-to-end distance $\approx R$) and an "escaped" part of the chain, the "crown", outside the piston. The extension of this problem to the case of star polymers with $f$ arms is considered, assuming that the center of the star is grafted to the substrate. The question is considered whether under compression the arms escape all together, or whether there occurs an arm by arm escape under increasing compression. Both self-consistent field calculations and Molecular Dynamics simulations are found to favor the latter scenario.

cond-mat.soft↗

arXiv2013

Star Polymers Confined in a Nanoslit: A Simulation Test of Scaling and Self-Consistent Field Theories

The free energy cost of confining a star polymer where $f$ flexible polymer chains containing $N$ monomeric units are tethered to a central unit in a slit with two parallel repulsive walls a distance $D$ apart is considered, for good solvent conditions. Also the parallel and perpendicular components of the gyration radius of the star polymer, and the monomer density profile across the slit are obtained. Theoretical descriptions via Flory theory and scaling treatments are outlined, and compared to numerical self-consistent field calculations (applying the Scheutjens-Fleer lattice theory) and to Molecular Dynamics results for a bead-spring model. It is shown that Flory theory and self-consistent field (SCF) theory yield the correct scaling of the parallel linear dimension of the star with $N$, $f$ and $D$, but cannot be used for estimating the free energy cost reliably. We demonstrate that the same problem occurs already for the confinement of chains in cylindrical tubes. We also briefly discuss the problem of a free or grafted star polymer interacting with a single wall, and show that the dependence of confining force on the functionality of the star is different for a star confined in a nanoslit and a star interacting with a single wall, which is due to the absence of a symmetry plane in the latter case.

cond-mat.soft↗

arXiv2012

Langevin Dynamics simulations of a 2-dimensional colloidal crystal under confinement and shear

Langevin Dynamics simulations are used to study the effect of shear on a two-dimensional colloidal crystal confined by structured parallel walls. When walls are sheared very slowly, only two or three crystalline layers next to the walls move along with them, while the inner layers of the crystal are only slightly tilted. At higher shear velocities, this inner part of the crystal breaks into several pieces with different orientations. The velocity profile across the slit is reminiscent of shear-banding in flowing soft materials, where liquid and solid regions coexist; the difference, however, is that in the latter case the solid regions are glassy while here they are crystalline. At even higher shear velocities, the effect of the shearing becomes smaller again. Also the effective temperature near the walls (deduced from the velocity distributions of the particles) decreases again when the wall velocity gets very large. When the walls are placed closer together, thereby introducing a misfit, a structure containing a soliton staircase arises in simulations without shear. Introducing shear increases the disorder in these systems until no solitons are visible any more. Instead, similar structures like in the case without misfit result. At high shear rates, configurations where the incommensurability of the crystalline structure is compensated by the creation of holes become relevant.

cond-mat.soft↗

arXiv2011

Microcanonical Determination of the Interface Tension of Flat and Curved Interfaces from Monte Carlo Simulations

The investigation of phase coexistence in systems with multi-component order parameters in finite systems is discussed, and as a generic example, Monte Carlo simulations of the two-dimensional q-state Potts model (q=30) on LxL square lattices (40<=L<=100) are presented. It is shown that the microcanonical ensemble is well-suited both to find the precise location of the first order phase transition and to obtain an accurate estimate for the interfacial free energy between coexisting ordered and disordered phases. For this purpose, a microcanonical version of the heatbath algorithm is implemented. The finite size behaviour of the loop in the curve describing the inverse temperature versus energy density is discussed, emphasizing that the extrema do not have the meaning of van der Waals-like "spinodal points" separating metastable from unstable states, but rather describe the onset of heterophase states: droplet/bubble evaporation/condensation transitions. Thus all parts of these loops, including the parts that correspond to a negative specific heat, describe phase coexistence in full thermal equilibrium. However, the estimates for the curvature-dependent interface tension of the droplets and bubbles suffer from unexpected and unexplained large finite size effects which need further study.

cond-mat.stat-mech↗

arXiv2010

A slow process in confined polymer melts: layer exchange dynamics at a polymer solid interface

Employing Molecular Dynamics simulations of a chemically realistic model of 1,4-polybutadiene between graphite walls we show that the mass exchange between layers close to the walls is a slow process already in the melt state. For the glass transition of confined polymers this process competes with the slowing down due to packing effects and intramolecular rotation barriers.

cond-mat.soft↗

arXiv2010

Curvature Dependence of Surface Free Energy of Liquid Drops and Bubbles: A Simulation Study

We study the excess free energy due to phase coexistence of fluids by Monte Carlo simulations using successive umbrella sampling in finite LxLxL boxes with periodic boundary conditions. Both the vapor-liquid phase coexistence of a simple Lennard-Jones fluid and the coexistence between A-rich and B-rich phases of a symmetric binary (AB) Lennard-Jones mixture are studied, varying the density rho in the simple fluid or the relative concentration x_A of A in the binary mixture, respectively. The character of phase coexistence changes from a spherical droplet (or bubble) of the minority phase (near the coexistence curve) to a cylindrical droplet (or bubble) and finally (in the center of the miscibility gap) to a slab-like configuration of two parallel flat interfaces. Extending the analysis of M. Schrader, P. Virnau, and K. Binder [Phys. Rev. E 79, 061104 (2009)], we extract the surface free energy gamma (R) of both spherical and cylindrical droplets and bubbles in the vapor-liquid case, and present evidence that for R -> Infinity the leading order (Tolman) correction for droplets has sign opposite to the case of bubbles, consistent with the Tolman length being independent on the sign of curvature. For the symmetric binary mixture the expected non-existence of the Tolman length is confirmed. In all cases {and for a range of radii} R relevant for nucleation theory, gamma(R) deviates strongly from gamma (Infinity) which can be accounted for by a term of order gamma(Infinity)/gamma(R)-1 ~ 1/R^2. Our results for the simple Lennard-Jones fluid are also compared to results from density functional theory and we find qualitative agreement in the behavior of gamma(R) as well as in the sign and magnitude of the Tolman length.

cond-mat.soft↗

arXiv2010

Finite size scaling in Ising-like systems with quenched random fields: Evidence of hyperscaling violation

In systems belonging to the universality class of the random field Ising model, the standard hyperscaling relation between critical exponents does not hold, but is replaced by a modified hyperscaling relation. As a result, standard formulations of finite size scaling near critical points break down. In this work, the consequences of modified hyperscaling are analyzed in detail. The most striking outcome is that the free energy cost ΔF of interface formation at the critical point is no longer a universal constant, but instead increases as a power law with system size, ΔF proportional to $L^θ$, with $θ$ the violation of hyperscaling critical exponent, and L the linear extension of the system. This modified behavior facilitates a number of new numerical approaches that can be used to locate critical points in random field systems from finite size simulation data. We test and confirm the new approaches on two random field systems in three dimensions, namely the random field Ising model, and the demixing transition in the Widom-Rowlinson fluid with quenched obstacles.

cond-mat.stat-mech↗

arXiv2010

Absorption/Expulsion of Oligomers and Linear Macromolecules in a Polymer Brush

The absorption of free linear chains in a polymer brush was studied with respect to chain size $L$ and compatibility $χ$ with the brush by means of Monte Carlo (MC) simulations and Density Functional Theory (DFT) / Self-Consistent Field Theory (SCFT) at both moderate, $σ_g = 0.25$, and high, $σ_g = 1.00$, grafting densities using a bead-spring model. Different concentrations of the free chains $0.0625 \le ϕ_o \le 0.375$ are examined. Contrary to the case of $χ= 0$ when all species are almost completely ejected by the polymer brush irrespective of their length $L$, for $χ< 0$ we find that the degree of absorption (absorbed amount) $Γ(L)$ undergoes a sharp crossover from weak to strong ($\approx 100%$) absorption, discriminating between oligomers, $1\le L\le 8$, and longer chains. For a moderately dense brush, $σ_g = 0.25$, the longer species, $L > 8$, populate predominantly the deep inner part of the brush whereas in a dense brush $σ_g = 1.00$ they penetrate into the "fluffy" tail of the dense brush only. Gyration radius $R_g$ and end-to-end distance $R_e$ of absorbed chains thereby scale with length $L$ as free polymers in the bulk. Using both MC and DFT/SCFT methods for brushes of different chain length $32 \le N \le 256$, we demonstrate the existence of unique {\em critical} value of compatibility $χ= χ^{c}<0$. For $χ^{c}(ϕ_o)$ the energy of free chains attains the {\em same} value, irrespective of length $L$ whereas the entropy of free chain displays a pronounced minimum. At $χ^{c}$ all density profiles of absorbing chains with different $L$ intersect at the same distance from the grafting plane. The penetration/expulsion kinetics of free chains into the polymer brush after an instantaneous change in their compatibility $χ$ displays a rather rich behavior. We find three distinct regimes of penetration kinetics of free chains regarding the length $L$: I ($1\le L\le 8$), II ($8 \le L \le N$), and III ($L > N$), in which the time of absorption $τ$ grows with $L$ at a different rate. During the initial stages of penetration into the brush one observes a power-law increase of $Γ\propto t^α$ with power $α\propto -\ln ϕ_o$ whereby penetration of the free chains into the brush gets {\em slower} as their concentration rises.

cond-mat.soft↗

arXiv2010

Monte Carlo simulations of the solid-liquid transition in hard spheres and colloid-polymer mixtures

Monte Carlo simulations at constant pressure are performed to study coexistence and interfacial properties of the liquid-solid transition in hard spheres and in colloid-polymer mixtures. The latter system is described as a one-component Asakura-Oosawa (AO) model where the polymer's degrees of freedom are incorporated via an attractive part in the effective potential for the colloid-colloid interactions. For the considered AO model, the polymer reservoir packing fraction is eta_p^r=0.1 and the colloid-polymer size ratio is q=sigma_p/σ=0.15 (with sigma_p and sigma the diameter of polymers and colloids, respectively). Inhomogeneous solid-liquid systems are prepared by placing the solid fcc phase in the middle of a rectangular simulation box creating two interfaces with the adjoined bulk liquid. By analyzing the growth of the crystalline region at various pressures and for different system sizes, the coexistence pressure p_co is obtained, yielding p_co=11.576 k_BT/sigma^3 for the hard sphere system and p_co=8.0 k_BT/sigma^3 for the AO model (with k_B the Boltzmann constant and T the temperature). Several order parameters are introduced to distinguish between solid and liquid phases and to describe the interfacial properties. From the capillary-wave broadening of the solid-liquid interface, the interfacial stiffness is obtained for the (100) crystalline plane, giving the values gamma=0.49 k_BT/sigma^2 for the hard-sphere system and gamma=0.95 k_BT/sigma^2 for the AO model.

cond-mat.soft↗

arXiv2009

Computer simulation studies of finite-size broadening of solid-liquid interfaces: From hard spheres to nickel

Using Molecular Dynamics (MD) and Monte Carlo (MC) simulations interfacial properties of crystal-fluid interfaces are investigated for the hard sphere system and the one-component metallic system Ni (the latter modeled by a potential of the embedded atom type). Different local order parameters are considered to obtain order parameter profiles for systems where the crystal phase is in coexistence with the fluid phase, separated by interfaces with (100) orientation of the crystal. From these profiles, the mean-squared interfacial width w^2 is extracted as a function of system size. We rationalize the prediction of capillary wave theory that w^2 diverges logarithmically with the lateral size of the system. We show that one can estimate the interfacial stiffness from the interfacial broadening, obtaining 0.5 k_B T/sigma^2 for hard spheres and 0.18 J/m^2 for Ni.

cond-mat.mtrl-sci↗

arXiv2009

Hydrokinetic simulations of nanoscopic precursor films in rough channels

We report on simulations of capillary filling of high-wetting fluids in nano-channels with and without obstacles. We use atomistic (molecular dynamics) and hydrokinetic (lattice-Boltzmann) approaches which point out clear evidence of the formation of thin precursor films, moving ahead of the main capillary front. The dynamics of the precursor films is found to obey a square-root law as the main capillary front, z^2(t) ~ t, although with a larger prefactor, which we find to take the same value for the different geometries (2D-3D) under inspection. The two methods show a quantitative agreement which indicates that the formation and propagation of thin precursors can be handled at a mesoscopic/hydrokinetic level. This can be considered as a validation of the Lattice-Boltzmann (LB) method and opens the possibility of using hydrokinetic methods to explore space-time scales and complex geometries of direct experimental relevance. Then, LB approach is used to study the fluid behaviour in a nano-channel when the precursor film encounters a square obstacle. A complete parametric analysis is performed which suggests that thin-film precursors may have an important influence on the efficiency of nanochannel-coating strategies.

physics.flu-dyn↗

arXiv2008

Coarse-grained models for fluids and their mixtures: Comparison of Monte Carlo studies of their phase behavior with perturbation theory and experiment

The prediction of the equation of state and the phase behavior of simple fluids (noble gases, carbon dioxide, benzene, methane, short alkane chains) and their mixtures by Monte Carlo computer simulation and analytic approximations based on thermodynamic perturbation theory is discussed. Molecules are described by coarse grained (CG) models, where either the whole molecule (carbon dioxide, benzene, methane) or a group of a few successive CH_2 groups (in the case of alkanes) are lumped into an effective point particle. Interactions among these point particles are fitted by Lennard-Jones (LJ) potentials such that the vapor-liquid critical point of the fluid is reproduced in agreement with experiment; in the case of quadrupolar molecules a quadrupole-quadrupole interaction is included. These models are shown to provide a satisfactory description of the liquid-vapour phase diagram of these pure fluids. Investigations of mixtures, using the Lorentz-Berthelot (LB) combining rule, also produce satisfactory results if compared with experiment, while in some previous attempts (in which polar solvents were modelled without explicitly taking into account quadrupolar interaction), strong violations of the LB rules were required. For this reason, the present investigation is a step towards predictive modelling of polar mixtures at low computational cost. These very simple coarse-grained models of small molecules developed here should be useful e.g. for simulations of polymer solutions with such molecules as solvent.

cond-mat.stat-mech↗

arXiv2008

Evidence of thin-film precursors formation in hydrokinetic and atomistic simulations of nano-channel capillary filling

We present hydrokinetic Lattice Boltzmann and Molecular Dynamics simulations of capillary filling of high-wetting fluids in nano-channels, which provide clear evidence of the formation of thin precursor films, moving ahead of the main capillary front. The dynamics of the precursor films is found to obey the Lucas-Washburn law as the main capillary front, z2(t) proportional to t, although with a larger prefactor, which we find to take the same value for both geometries under inspection. Both hydrokinetic and Molecular Dynamics approaches indicate a precursor film thickness of the order of one tenth of the capillary diameter. The quantitative agreement between the hydrokinetic and atomistic methods indicates that the formation and propagation of thin precursors can be handled at a mesoscopic/hydrokinetic level, thereby opening the possibility of using hydrokinetic methods to space-time scales and complex geometries of direct experimental relevance.

physics.flu-dyn↗

arXiv2008

Colloid-polymer mixtures in random porous media: Finite size scaling and connected versus disconnected susceptibilities

As a generic model for liquid-vapour type transitions in random porous media, the Asakura-Oosawa model for colloid-polymer mixtures is studied in a matrix of quenched spheres using extensive Monte Carlo (MC) simulations. Since such systems at criticality, as well as in the two-phase region, exhibit lack of self-averaging, the analysis of MC data via finite size scaling requires special care. After presenting the necessary theoretical background and the resulting subtleties of finite size scaling in random-field Ising-type systems, we present data on the order parameter distribution (and its moments) as a function of colloid and polymer fugacities for a broad range of system sizes, and for many (thousands) realizations of the porous medium. Special attention is paid to the connected and disconnected susceptibilities, and their respective critical behavior. We show that both susceptibilities diverge at the critical point, and we demonstrate that this is compatible with the predicted scenario of random-field Ising universality.

cond-mat.soft↗

arXiv2008

Phase separation of an asymmetric binary fluid mixture confined in a nanoscopic slit pore: Molecular-dynamics simulations

As a generic model system of an asymmetric binary fluid mixture, hexadecane dissolved in carbon dioxide is considered, using a coarse-grained bead-spring model for the short polymer, and a simple spherical particle with Lennard-Jones interactions for the carbon dioxide molecules. In previous work, it has been shown that this model reproduces the real phase diagram reasonable well, and also the initial stages of spinodal decomposition in the bulk following a sudden expansion of the system could be studied. Using the parallelized simulation package ESPResSo on a multiprocessor supercomputer, phase separation of thin fluid films confined between parallel walls that are repulsive for both types of molecules are simulated in a rather large system (1356 x 1356 x 67.8 A^3, corresponding to about 3.2 million atoms). Following the sudden system expansion, a complicated interplay between phase separation in the directions perpendicular and parallel to the walls is found: in the early stages the hexadecane molecules accumulate mostly in the center of the slit pore, but as the coarsening of the structure in the parallel direction proceeds, the inhomogeneity in the perpendicular direction gets much reduced. Studying then the structure factors and correlation functions at fixed distances from the wall, the densities are essentially not conserved at these distances, and hence the behavior differs strongly from spinodal decomposition in the bulk. Some of the characteristic lengths show a nonmonotonic variation with time, and simple coarsening described by power-law growth is only observed if the domain sizes are much larger than the film thickness.

cond-mat.soft↗