arXiv Science⌕ Search

arXiv subjects

Junhyoung Ha

Publications and source records attributed to Junhyoung Ha.

7 recordsLinked to original sources

Modeling the Frictional Contact of Continuum Robots with Environments through Linear Complementarity Problem

Accurate friction modeling in continuum robots is essential for precise motion control and path planning. However, current approaches make predictions only for the mechanism's internal friction that is limited by the boundary forces of the Coulomb friction cone, which fail to characterize the static friction and motion hysteresis. In this paper, we propose a novel friction model based on complementarity constraints under the Coulomb friction assumption. This model predicts various friction effects caused by environmental interactions, including both static and sliding frictions and hysteresis behavior, as well as the corresponding robot deformation induced by these interactions, which are crucial for the practical motion planning and control of continuum robots. Additionally, real-time implementation of this model can be achieved, meeting the demand for computational efficiency in robotic applications. Experimental validations demonstrated that this model is able to reduce the maximum tip position error from 45.4 mm in the frictionless model to 5.85 mm in our friction-included model with a 287.9 mm-long tendon-driven continuum robot.

cs.RO↗

MoE-DAgger: Transition-Aware Router-Entropy Gating for Selective Human Correction in Phase-Structured Manipulation

Selective data acquisition in Dataset Aggregation (DAgger) on robots requires deciding which learner rollouts to correct and when to intervene. In manipulation with ordered phases, router entropy from a phase-supervised soft mixture-of-experts (MoE) is insufficient: the same value can reflect either a normal adjacent-phase handoff or support for nonadjacent or earlier phases. We propose MoE-DAgger, which uses causal router history to distinguish these cases without providing the policy with a phase label, progress variable, or hard phase command during execution. The acquisition rule allows an adjacent transition to settle, but requests correction when high entropy persists outside such a transition, the transition times out, or routing persistently favors an earlier phase. Under matched active human-control budgets, MoE-DAgger achieves 84.0% task success on Green and 78.0% on Red, exceeding phase-unaware filtered entropy by 22 percentage points on Green and 26 points on Red, with no observed collisions in 50 rollouts per task. On 50 shared intervention-free traces per task, 83.3% and 80.0% of its first proposals fall on failed rollouts within predefined failure windows when 15 and 25 traces are selected, compared with 70.0% and 72.0% for temporal action-chunk disagreement and 63.3% and 60.0% for ensemble disagreement. Shadow replay and an active no-veto ablation indicate that suppressing queries at normal adjacent handoffs is a key contributor to the improved allocation.

cs.RO↗

Incorporating General Contact Surfaces in the Kinematics of Tendon-Driven Rolling-Contact Joint Mechanisms

This paper presents the first kinematic modeling of tendon-driven rolling-contact joint mechanisms with general contact surfaces subject to external loads. We derived the kinematics as a set of recursive equations and developed efficient iterative algorithms to solve for both tendon force actuation and tendon displacement actuation. The configuration predictions of the kinematics were experimentally validated using a prototype mechanism. Our MATLAB implementation of the proposed kinematic is available at https://github.com/hjhdog1/RollingJoint.

cs.RO↗

Generative Adversarial Networks for Solving Hand-Eye Calibration without Data Correspondence

In this study, we rediscovered the framework of generative adversarial networks (GANs) as a solver for calibration problems without data correspondence. When data correspondence is not present or loosely established, the calibration problem becomes a parameter estimation problem that aligns the two data distributions. This procedure is conceptually identical to the underlying principle of GAN training in which networks are trained to match the generative distribution to the real data distribution. As a primary application, this idea is applied to the hand-eye calibration problem, demonstrating the proposed method's applicability and benefits in complicated calibration problems.

cs.RO↗

Development of Tendon-Driven Compliant Snake Robot with Global Bending and Twisting Actuation

Snake robots have been studied for decades with the aim of achieving biological snakes' fluent locomotion. Yet, as of today, their locomotion remains far from that of the biological snakes. Our recent study suggested that snake locomotion utilizing partial ground contacts can be achieved with robots by using body compliance and lengthwise-globally applied body tensions. In this paper, we present the first hardware implementation of this locomotion principle. Our snake robot comprises serial tendon-driven continuum sections and is bent and twisted globally using tendons. We demonstrate how the tendons are actuated to achieve the ground contacts for forward and backward locomotion and sidewinding. The robot's capability to generate snake locomotion in various directions and its steerability were validated in a series of indoor experiments.

cs.RO↗

Obstacle- and Occlusion-Responsive Visual Tracking Control for Redundant Manipulators using Reachability Measure

A vision system attached to a manipulator excels at tracing a moving target object while effectively handling obstacles, overcoming limitations arising from the camera's confined field of view and occluded line of sight. Meanwhile, the manipulator may encounter certain challenges, including restricted motion due to kinematic constraints and the risk of colliding with external obstacles. These challenges are typically addressed by assigning multiple task objectives to the manipulator. However, doing so can cause an increased risk of driving the manipulator to its kinematic limits, leading to failures in object tracking or obstacle avoidance. To address this issue, we propose a novel visual tracking control method for a redundant manipulator that takes the kinematic constraints into account via a reachability measure. Our method employs an optimization-based controller that considers object tracking, occlusion avoidance, collision avoidance, and the kinematic constraints represented by the reachability measure. Subsequently, it determines a suitable joint configuration through real-time inverse kinematics, accounting for dynamic obstacle avoidance and the continuity of joint configurations. To validate our approach, we conducted simulations and hardware experiments involving a moving target and dynamic obstacles. The results of our evaluations highlight the significance of incorporating the reachability measure.

cs.RO↗

Toward Extending Concentric Tube Robot Kinematics for Large Clearance and Impulse Curvature

Concentric Tube Robots (CTRs) have been proposed to operate within the unstructured environment for minimally invasive surgeries. In this letter, we consider the operation scenario where the tubes travel inside the channels with a large clearance or large curvature, such as aortas or industrial pipes. Accurate kinematic modeling of CTRs is required for the development of advanced control and sensing algorithms. To this end, we extended the conventional CTR kinematics model to a more general case with large tube-to-tube clearance and large centerline curvature. Numerical simulations and experimental validations are conducted to compare our model with respect to the conventional CTR kinematic model. In the physical experiments, our proposed model achieved a tip position error of 1.53 mm in the 2D planer case and 4.36 mm in 3D case, outperforming the state-of-the-art model by 71% and 66%, respectively.

cs.RO↗