arXiv subjects

Jun Zou

Publications and source records attributed to Jun Zou.

At least 19 recordsLinked to original sources

arXiv2026

Research and simulation of analytical polarization control enabled by optical computing on an integrated photonics chip

Dynamic polarization controllers are key devices with broad applications in many fields. However, most on-chip polarization controllers still rely on traditional blind-search methods, whereas analytical optical-computing approaches remain insufficiently explored, particularly with respect to calibration and endless polarization control. With the accurate relative phase of Mach-Zehnder interferometer (MZI) being fully controllable on an integrated photonics chip, we present an analytical polarization control (APC) method using four phase shifters and optical computing, eliminating the need for the traditional inefficient blind-search procedure. The basic structures and operations of APC are clarified. The proposed calibration method and endless control method enable continuous APC while compensating for phase differences within the MZI structures. We simulate the influence of the endless control unit on polarization control and quantify the effect of the fourth phase difference on the output extinction ratio. With the fourth phase shifter, the phase difference encountered during Stokes vector measurement can be effectively compensated, and rotations around all three axes on the Poincar\'e sphere can be realized. These results establish a practical APC architecture based on optical computing for photonics chips. The proposed APC methods, combined with a FPGA-based hardware acceleration, will enable high speed on-chip polarization controllers.

physics.optics↗

arXiv2026

Direct Sampling Methods for Inverse Interface Problems

This work investigates two types of inverse interface problems in scenarios where only very limited Cauchy data is available. These problems are associated with the Laplace equation featuring a Robin-type flux jump across an internal interface. The first problem focuses on reconstructing the location of cracks along a known interface using Cauchy data measured on the outer boundary. The second problem involves determining the location of an unknown interface based on Cauchy data from the outer boundary. To address these challenges, we adopt an efficient Direct Sampling Method (DSM) and introduce innovative enhancements to the boundary conditions in the reference system, thereby maximizing the utility of the available Cauchy data. Additionally, we propose a novel refinement to further improve the robustness of the DSM against noise. We provide a detailed exposition of the general principles underlying the DSM and systematically present its computational implementation steps. Through detailed Fourier analysis and computations, we illustrate the theoretical background of the DSM as well as the effectiveness of our refinement approach. A series of numerical experiments demonstrates that our method yields highly satisfactory results, even when processing incomplete and noisy Cauchy data on the outer boundary. We introduce quantitative metrics, such as Mean Localization Error (MLE) and Contrast-to-Noise Ratio (CNR), to rigorously evaluate the performance of our method. These findings underscore the exceptional effectiveness and broad applicability of the proposed approach.

math.NA↗

arXiv2026

R&D of cosmic ray detection module with liquid scintillator and wavelength shift fiber

For neutrino physics and rare event searches, background related to cosmic muons poses a notable challenge, and must be identified and rejected. It is also a challenge to control the cost with good performance for a large array of cosmic ray detection. We proposed a cosmic ray detection module with liquid scintillator and wavelength-shifting fibers for its reasonable cost and performances. The results from the measurements of a prototype with Muon indicate that the detector's photoelectron response is good. % comparing to the expectation. The outcomes of this study hold significant potential for applications in cosmic ray observation experiments and underground rare-event detection, providing a viable option for future large-scale observatories. This work highlights the feasibility of liquid scintillator-based detectors in addressing current and emerging challenges in particle physics and astrophysics.

physics.ins-det↗

arXiv2026

Symmetry and critical points of second Neumann eigenfunctions on isosceles trapezoids and kites

In this paper, we determine the symmetry properties and non-vertex critical points of the second Neumann eigenfunction $u$, as well as the multiplicity of the corresponding eigenvalue, on isosceles trapezoids and kites. By exploiting reflection symmetry, we reduce the problem to a comparison between the second Neumann eigenvalue and the first mixed Dirichlet--Neumann eigenvalue on the half-domain. More precisely, for isosceles trapezoids with base angle $\alpha\leq \frac{\pi}{3}$, the second eigenfunction is antisymmetric. If $\frac{\pi}{3}<\alpha<\frac{\pi}{2}$, there exists a critical height $\hat{h}(\alpha)$ at which the two symmetry branches cross: $u$ is antisymmetric when height $h<\hat{h}(\alpha)$ and symmetric when $h>\hat{h}(\alpha)$, while at $h=\hat{h}(\alpha)$ the second Neumann eigenvalue has multiplicity two. For a convex kite $P_1P_2P_3P_4$, where $P_1=(0,0)$, $P_2=(a,-h)$, $P_3=(1,0)$, and $P_4=(a,h)$, an analogous result holds: there exists a critical height $\tilde{h}(a)$ such that $u$ is symmetric with respect to the $x$-axis when $h<\tilde{h}(a)$ and antisymmetric with respect to the $x$-axis when $h>\tilde{h}(a)$, while at $h=\tilde{h}(a)$ the second Neumann eigenvalue has multiplicity two. In all cases where the second Neumann eigenvalue is simple, we determine all non-vertex critical points of the corresponding eigenfunction, thereby verifying the hot spots conjecture.

math.AP↗

arXiv2026

Average block nonlinear Kaczmarz methods with adaptive momentum for nonlinear systems of equations

The Kaczmarz method is widely recognized as an efficient iterative algorithm for solving large-scale linear systems, owing to its simplicity and low memory requirements. However, the development of its nonlinear extensions for solving large-scale nonlinear systems has seen limited progress. In this work, we introduce a new family of momentum-accelerated averaging block nonlinear Kaczmarz methods tailored for large-scale nonlinear systems and ill-posed problems. Our contributions are twofold: (1) We develop an adaptive strategy for selecting step sizes and momentum coefficients, leading to a new average block nonlinear Kaczmarz method with adaptive momentum (ABNKAm). This algorithm achieves high computational efficiency by requiring only minimal inner-product computations per iteration, which significantly reduces both arithmetic complexity and memory usage. (2) We establish rigorous convergence of the ABNKAm under mild assumptions, proving that the method converges exponentially to the unique solution nearest to the initial point. Moreover, under suitable conditions, we provide a theoretical justification of acceleration of the proposed ABNKAm with momentum. Extensive numerical experiments demonstrate that ABNKAm outperforms existing nonlinear Kaczmarz variants in terms of both iteration count and computational time, with particularly notable gains in large-scale problems.

math.NA↗

arXiv2025

A Stable Iterative Direct Sampling Method for Elliptic Inverse Problems with Partial Cauchy Data

We develop a novel iterative direct sampling method (IDSM) for solving linear or nonlinear elliptic inverse problems with partial Cauchy data. It integrates three innovations: a data completion scheme to reconstruct missing boundary information, a heterogeneously regularized Dirichlet-to-Neumann map to enhance the near-orthogonality of probing functions, and a stabilization-correction strategy to ensure the numerical stability. The resulting method is remarkably robust with respect to measurement noise, is flexible with the measurement configuration, enjoys provable stability guarantee, and achieves enhanced resolution for recovering inhomogeneities. Numerical experiments in electrical impedance tomography, diffuse optical tomography, and cardiac electrophysiology show its effectiveness in accurately reconstructing the locations and geometries of inhomogeneities.

math.NA↗

arXiv2025

An Iterative Direct Sampling Method for Reconstructing Moving Inhomogeneities in Parabolic Problems

We propose in this work a novel iterative direct sampling method for imaging moving inhomogeneities in parabolic problems using boundary measurements. It can efficiently identify the locations and shapes of moving inhomogeneities when very limited data are available, even with only one pair of lateral Cauchy data, and enjoys remarkable numerical stability for noisy data and over an extended time horizon. The method is formulated in an abstract framework, and is applicable to linear and nonlinear parabolic problems, including linear, nonlinear, and mixed-type inhomogeneities. Numerical experiments across diverse scenarios show its effectiveness and robustness against the data noise.

math.NA↗

arXiv2025

A Novel Preconditioning Framework for Solving Nonlinear PDEs based on Fenchel-Rockafellar Duality and Transformed Primal-Dual Techniques

A DualTPD method is proposed for solving nonlinear partial differential equations. The method is characterized by three main features. First, decoupling via Fenchel--Rockafellar duality is achieved, so that nonlinear terms are discretized by discontinuous finite element spaces, yielding block-diagonal mass matrices and closed-form updates. Second, improved convergence is obtained by applying transformed primal--dual (TPD) dynamics to the nonlinear saddle-point system, which yields strongly monotone behavior. Third, efficient preconditioners are designed for the elliptic-type Schur complement arising from the separated differential operators, and multigrid solvers are applied effectively. Extensive numerical experiments on elliptic $p$-Laplacian and nonlinear $H(\curl)$ problems are presented, showing significant efficiency gains with global, mesh-independent convergence.

math.NA↗

arXiv2025

Inexact projected preconditioned gradient methods with variable metrics: a Lyapunov convergence theory (extended version)

Projected gradient methods are widely used for constrained optimization. A key application is for partial differential equations (PDEs), where the objective functional represents physical energy and the linear constraints enforce conservation laws. However, computing the projections onto constraint sets generally requires solving large-scale ill-conditioned systems. A common strategy is to relax projection accuracy and apply preconditioners, which leads to inexact preconditioned projected gradient descent (IPPGD) methods studied here. Furthermore, variable preconditioners dynamically incorporating updated nonlinear information often enhance convergence rates. However, due to the complex interplay between inexactness and adaptive preconditioners, the theoretical analysis and the dynamic behavior of the IPPGD methods still remain quite open. We propose an effective strategy for constructing the inexact projection operator and develop a gradient-type flow to model the resulting IPPGD methods. Discretization of this flow not only recovers the original IPPGD method but also yields a potentially faster novel method. Furthermore, we apply Lyapunov analysis, designing a delicate Lyapunov function, to prove the exponential convergence at the continuous level and linear convergence at the discrete level under certain assumptions. Finally, we validate our approach through numerical experiments, demonstrating robust performance and computational efficiency.

math.OC↗

arXiv2025

Highly integrated broadband entropy source for quantum random number generators based on vacuum fluctuations

In this work, we designed and experimentally verified a highly integrated broadband entropy source for a quantum random number generator (QRNG) based on vacuum fluctuations. The core of the entropy source is a hybrid laser-and-silicon-photonics chip, which is only 6.3 $ \times $ 2.6 $ \times $ 1.5 mm$^{3}$ in size. A balanced homodyne detector based on cascaded radio-frequency amplifiers in the entropy source achieves a 3 dB bandwidth of 2.4 GHz and a common-mode rejection ratio above 25 dB. The quantum-to-classical-noise ratio is 9.51 dB at a photoelectron current of 1 mA. The noise equivalent power and equivalent transimpedance are 8.85$\,\text{pW}/\sqrt{\text{Hz}}$ , and 22.8 k$\Omega$, respectively. After optimization using equalizer technology that eliminates the dependence of adjacent samples, the quantum random number generation rate reaches 67.9 Gbps under average conditional minimum entropy and 61.9 Gbps under the worst-case conditional minimum entropy. The developed hybrid chip enhances the integrability and speed of QRNG entropy sources based on vacuum fluctuations.

quant-ph↗

arXiv2025

Iterative Direct Sampling Method for Elliptic Inverse Problems with Limited Cauchy Data

In this work, we propose an innovative iterative direct sampling method to solve nonlinear elliptic inverse problems from a limited number of pairs of Cauchy data. It extends the original direct sampling method (DSM) by incorporating an iterative mechanism, enhancing its performance with a modest increase in computational effort but a clear improvement in its stability against data noise. The method is formulated in an abstract framework of operator equations and is applicable to a broad range of elliptic inverse problems. Numerical results on electrical impedance tomography, optical tomography and cardiac electrophysiology etc. demonstrate its effectiveness and robustness, especially with an improved accuracy for identifying the locations and geometric shapes of inhomogeneities in the presence of large noise, when compared with the standard DSM.

math.NA↗

arXiv2024

Calibration of cascaded phase shifters using pairwise scan method in silicon photonics integrated chip

Cascaded phase shifters (CPSs) based on silicon photonics integrated chips play important roles in quantum information processing tasks. Owing to an increase in the scale of silicon photonics chips, the time required to calibrate various CPSs has increased. We propose a pairwise scan method for rapidly calibrating CPSs by introducing equivalent Mach Zehnder Interferometer structures and a reasonable constraint of the initial relative phase. The calibration can be nearly completed when the scanning process is finished, and only a little calculation is required. To achieve better performance, the key components, thermal optical phase shifter and 2 * 2 50/50 multimode interference coupler, were simulated and optimized to prevent thermal crosstalk and ensure a good balance. A 6-CPSs structure in a packaged silicon photonics chip under different temperature was used to verify the rapid pairwise scan method, and a fidelity of 99.97% was achieved.

quant-ph↗

arXiv2024

Constructing probing functions for direct sampling methods for inverse scattering problems with limited-aperture data: finite space framework and deep probing network

This work studies an inverse scattering problem when limited-aperture data are available that are from just one or a few incident fields. This inverse problem is highly ill-posed due to the limited receivers and a few incident fields employed. Solving inverse scattering problems with limited-aperture data is important in applications as collecting full data is often either unrealistic or too expensive. The direct sampling methods (DSMs) with full-aperture data can effectively and stably estimate the locations and geometric shapes of the unknown scatterers with a very limited number of incident waves. However, a direct application of DSMs to the case of limited receivers would face the resolution limit. To break this limitation, we propose a finite space framework with two specific schemes, and an unsupervised deep learning strategy to construct effective probing functions for the DSMs in the case with limited-aperture data. Several representative numerical experiments are carried out to illustrate and compare the performance of different proposed schemes.

math.NA↗

arXiv2024

DNN-based Enhanced DOA Sensing via Massive MIMO Receiver with Switches-based Hybrid Architecture

Switches-based hybrid architecture has attracted much attention, especially in directional-of-arrival (DOA) sensing, due to its ability of significantly reducing the hardware cost by compressing massive multiple-input multiple-output (MIMO) arrays with switching networks. However, this structure will lead to a degradation in the degrees of freedom (DOF) and accuracy of DOA estimation. To address these two issues, we first propose a switches-based sparse hybrid array (SW-SHA). In this method, we design a dynamic switching network to form a synthesized sparse array, i.e., SW-SHA, that can enlarge the virtual aperture obtained by the difference co-array, thereby significantly enhancing the DOF. Second, in order to improve the DOA estimation accuracy of switches-based hybrid arrays, a deep neural network (DNN)-based method called ASN-DNN is proposed. It includes an antenna selection network (ASN) for optimizing the switch connections based on the criterion of minimizing the Cramer-Rao lower bound (CRLB) under the peak sidelobe level (PSL) constraint and a DNN for DOA estimation. Then by integrating ASN and DNN into an iterative process, the ASN-DNN is obtained. Furthermore, the closed-form expression of CRLB for DOA estimation is derived to evaluate the performance lower bound of switches-based hybrid arrays and provide a benchmark for ASN-DNN. The simulation results show the proposed ASN-DNN can achieve a greater performance than traditional methods, especially in the low signal-to-noise ratio (SNR) regions.

eess.SP↗

arXiv2024

Two-level hybrid Schwarz Preconditioners for The Helmholtz Equation with high wave number

In this work, we propose and analyze two two-level hybrid Schwarz preconditioners for solving the Helmholtz equation with high wave number in two and three dimensions. Both preconditioners are defined over a set of overlapping subdomains, with each preconditioner formed by a global coarse solver and one local solver on each subdomain. The global coarse solver is based on the localized orthogonal decomposition (LOD) technique, which was proposed in [30,31] originally for the discretization schemes for elliptic multiscale problems with heterogeneous and highly oscillating coefficients and Helmholtz problems with high wave number to eliminate the pollution effect. The local subproblems are Helmholtz problems in subdomains with homogeneous boundary conditions (the first preconditioner) or impedance boundary conditions (the second preconditioner). Both preconditioners are shown to be optimal under some reasonable conditions, that is, a uniform upper bound of the preconditioned operator norm and a uniform lower bound of the field of values are established in terms of all the key parameters, such as the fine mesh size, the coarse mesh size, the subdomain size and the wave numbers. It is the first time to show that the LOD solver can be a very effective coarse solver when it is used appropriately in the Schwarz method with multiple overlapping subdomains. Numerical experiments are presented to confirm the optimality and efficiency of the two proposed preconditioners.

math.NA↗

arXiv2024

Adaptive Finite Element Method for a Nonlinear Helmholtz Equation with High Wave Number

A nonlinear Helmholtz (NLH) equation with high frequencies and corner singularities is discretized by the linear finite element method (FEM). After deriving some wave-number-explicit stability estimates and the singularity decomposition for the NLH problem, a priori stability and error estimates are established for the FEM on shape regular meshes including the case of locally refined meshes. Then a posteriori upper and lower bounds using a new residual-type error estimator, which is equivalent to the standard one, are derived for the FE solutions to the NLH problem. These a posteriori estimates have confirmed a significant fact that is also valid for the NLH problem, namely the residual-type estimator seriously underestimates the error of the FE solution in the preasymptotic regime, which was first observed by Babu\v{s}ka et al. [Int J Numer Methods Eng 40 (1997)] for a one-dimensional linear problem. Based on the new a posteriori error estimator, both the convergence and the quasi-optimality of the resulting adaptive finite element algorithm are proved the first time for the NLH problem, when the initial mesh size lying in the preasymptotic regime. Finally, numerical examples are presented to validate the theoretical findings and demonstrate that applying the continuous interior penalty (CIP) technique with appropriate penalty parameters can reduce the pollution errors efficiently. In particular, the nonlinear phenomenon of optical bistability with Gaussian incident waves is successfully simulated by the adaptive CIPFEM.

math.NA↗

arXiv2024

A Direct Sampling Method and Its Integration with Deep Learning for Inverse Scattering Problems with Phaseless Data

We consider in this work an inverse acoustic scattering problem when only phaseless data is available. The inverse problem is highly nonlinear and ill-posed due to the lack of the phase information. Solving inverse scattering problems with phaseless data is important in applications as the collection of physically acceptable phased data is usually difficult and expensive. A novel direct sampling method (DSM) will be developed to effectively estimate the locations and geometric shapes of the unknown scatterers from phaseless data generated by a very limited number of incident waves. With a careful theoretical analysis of the behavior of the index function and some representative numerical examples, the new DSM is shown to be computationally efficient, easy to implement, robust to large noise, and does not require any prior knowledge of the unknown scatterers. Furthermore, to fully exploit the index functions obtained from the DSM, we also propose to integrate the DSM with a deep learning technique (DSM-DL) to achieve high-quality reconstructions. Several challenging and representative numerical experiments are carried out to demonstrate the accuracy and robustness of reconstructions by DSM-DL. The DSM-DL networks trained by phased data are further theoretically and numerically shown to be able to solve problems with phaseless data. Additionally, our numerical experiments also show the DSM-DL can solve inverse scattering problems with mixed types of scatterers, which renders its applications in many important practical scenarios.

math.NA↗

arXiv2024

Compact quantum random number generator based on a laser diode and silicon photonics integrated hybrid chip

In this study, a compact and low-power-consumption quantum random number generator (QRNG) based on a laser diode and silicon photonics integrated hybrid chip is proposed and verified experimentally. The hybrid chip's size is 8.8*2.6*1 mm3, and the power of entropy source is 80 mW. A common mode rejection ratio greater than 40 dB was achieved using an optimized 1*2 multimode interferometer structure. A method for optimizing the quantum-to-classical noise ratio is presented. A quantum-to-classical noise ratio of approximately 9 dB was achieved when the photoelectron current is 1 microampere using a balance homodyne detector with a high dark current GeSi photodiode. The proposed QRNG has the potential for use in scenarios of moderate MHz random number generation speed, with low power, small volume, and low cost prioritized.

quant-ph↗