arXiv Science⌕ Search

arXiv subjects

Jun Li

Publications and source records attributed to Jun Li.

At least 631 records · Page 35Linked to original sources

The Dust Mass of Supernova Remnants in M31

The dust temperature and mass of the supernova remnants (SNRs) in M31 are estimated by fitting the infrared spectral energy distribution calculated from the images in the Spitzer/IRAC4 and MIPS24, Herschel/PACS70, 100, 160, and Herschel/SPIRE250, 350$μ$m band. Twenty SNRs with relatively reliable photometry exhibit an average dust temperature of $20.1^{+1.8}_{-1.5}$K, which is higher than the surrounding and indicating the heating effect of supernova explosion. The dust mass of these SNRs ranges from about 100 to 800$ M_{\odot}$, much bigger than the SNRs in the Milky Way. On the other hand, this yields the dust surface density of $0.10^{+0.07}_{-0.04}{ M_{\odot} \rm pc^{-2}}$, about half of the surrounding area, which implies that about half dust in the SNRs is destroyed by the supernova explosion. The dust temperature, the radius, and thus the dust mass all demonstrate that the studied SNRs are old and very likely in the snowplow or even fade away phase because of the limitation by the far distance and observation resolution of M31, and the results can serve as a reference to the final effect of supernova explosion on the surrounding dust.

astro-ph.GA↗

Cooperative Task Offloading and Block Mining in Blockchain-based Edge Computing with Multi-agent Deep Reinforcement Learning

The convergence of mobile edge computing (MEC) and blockchain is transforming the current computing services in mobile networks, by offering task offloading solutions with security enhancement empowered by blockchain mining. Nevertheless, these important enabling technologies have been studied separately in most existing works. This article proposes a novel cooperative task offloading and block mining (TOBM) scheme for a blockchain-based MEC system where each edge device not only handles data tasks but also deals with block mining for improving the system utility. To address the latency issues caused by the blockchain operation in MEC, we develop a new Proof-of-Reputation consensus mechanism based on a lightweight block verification strategy. A multi-objective function is then formulated to maximize the system utility of the blockchain-based MEC system, by jointly optimizing offloading decision, channel selection, transmit power allocation, and computational resource allocation. We propose a novel distributed deep reinforcement learning-based approach by using a multi-agent deep deterministic policy gradient algorithm. We then develop a game-theoretic solution to model the offloading and mining competition among edge devices as a potential game, and prove the existence of a pure Nash equilibrium. Simulation results demonstrate the significant system utility improvements of our proposed scheme over baseline approaches.

eess.SP↗

Sampling Network Guided Cross-Entropy Method for Unsupervised Point Cloud Registration

In this paper, by modeling the point cloud registration task as a Markov decision process, we propose an end-to-end deep model embedded with the cross-entropy method (CEM) for unsupervised 3D registration. Our model consists of a sampling network module and a differentiable CEM module. In our sampling network module, given a pair of point clouds, the sampling network learns a prior sampling distribution over the transformation space. The learned sampling distribution can be used as a "good" initialization of the differentiable CEM module. In our differentiable CEM module, we first propose a maximum consensus criterion based alignment metric as the reward function for the point cloud registration task. Based on the reward function, for each state, we then construct a fused score function to evaluate the sampled transformations, where we weight the current and future rewards of the transformations. Particularly, the future rewards of the sampled transforms are obtained by performing the iterative closest point (ICP) algorithm on the transformed state. By selecting the top-k transformations with the highest scores, we iteratively update the sampling distribution. Furthermore, in order to make the CEM differentiable, we use the sparsemax function to replace the hard top-$k$ selection. Finally, we formulate a Geman-McClure estimator based loss to train our end-to-end registration model. Extensive experimental results demonstrate the good registration performance of our method on benchmark datasets.

cs.CV↗

Low-Latency Federated Learning over Wireless Channels with Differential Privacy

In federated learning (FL), model training is distributed over clients and local models are aggregated by a central server. The performance of uploaded models in such situations can vary widely due to imbalanced data distributions, potential demands on privacy protections, and quality of transmissions. In this paper, we aim to minimize FL training delay over wireless channels, constrained by overall training performance as well as each client's differential privacy (DP) requirement. We solve this problem in the framework of multi-agent multi-armed bandit (MAMAB) to deal with the situation where there are multiple clients confornting different unknown transmission environments, e.g., channel fading and interferences. Specifically, we first transform the long-term constraints on both training performance and each client's DP into a virtual queue based on the Lyapunov drift technique. Then, we convert the MAMAB to a max-min bipartite matching problem at each communication round, by estimating rewards with the upper confidence bound (UCB) approach. More importantly, we propose two efficient solutions to this matching problem, i.e., modified Hungarian algorithm and greedy matching with a better alternative (GMBA), in which the first one can achieve the optimal solution with a high complexity while the second one approaches a better trade-off by enabling a verified low-complexity with little performance loss. In addition, we develop an upper bound on the expected regret of this MAMAB based FL framework, which shows a linear growth over the logarithm of communication rounds, justifying its theoretical feasibility. Extensive experimental results are conducted to validate the effectiveness of our proposed algorithms, and the impacts of various parameters on the FL performance over wireless edge networks are also discussed.

cs.DC↗

Weak Antilocalization Effect up to ~ 120 K in the van der Waals Crystal Fe5-xGeTe2 with Near Room Temperature Ferromagnetism

The weak antilocalization (WAL) effect is known as a quantum correction to the classical conductivity, which never appeared in two-dimensional magnets. In this work, we reported the observation of a WAL effect in the van der Waals ferromagnet Fe5-xGeTe2 with a Curie temperature Tc ~ 270 K, which can even reach as high as ~ 120 K. The WAL effect could be well described by the Hikami-Larkin-Nagaoka and Maekawa-Fukuyama theories in the presence of strong spin-orbit coupling (SOC). Moreover, A crossover from a peak to dip behavior around 60 K in both the magnetoresistance and magnetoconductance was observed, which could be ascribed to a rare example of temperature driven Lifshitz transition as indicated by the angle-resolved photoemission spectroscopy measurements and first principles calculations. The reflective magnetic circular dichroism measurements indicate a possible spin reorientation that kills the WAL effect above 120 K. Our findings present a rare example of WAL effect in two-dimensional ferromagnet and also a magnetotransport fingerprint of the strong SOC in Fe5-xGeTe2. The results would be instructive for understanding the interaction Hamiltonian for such high Tc itinerant ferromagnetism as well as be helpful for the design of next-generation room temperature spintronic or twistronic devices.

cond-mat.mtrl-sci↗

Charge density wave orders and enhanced superconductivity under pressure in the kagome metal CsV3Sb5

Superconductivity in topological kagome metals has recently received great research interests. Here, charge density wave (CDW) orders and the evolution of superconductivity under various pressures in CsV3Sb5 single crystal with V kagome lattice are investigated. By using high-resolution scanning tunnelling microscopy /spectroscopy (STM/STS), two CDW orders in CsV3Sb5 are observed which correspond to 4a*1a and 2a*2a superlattices. By applying pressure, the superconducting transition temperature Tc is significantly enhanced and reaches a maximum value of 8.2 K at around 1 GPa. Accordingly, CDW state is gradually declined as increasing the pressure, which indicates the competing interplay between CDW and superconducting state in this material. The broad superconducting transitions around 0.4 - 0.8 GPa can be related to the strong competition relation among two CDW states and superconductivity. These results demonstrate that CsV3Sb5 is a new platform for exploring the interplay between superconductivity and CDW in topological kagome metals.

cond-mat.supr-con↗

Anomalous Hall effect in ferrimagnetic metal RMn6Sn6 (R = Tb, Dy, Ho) with clean Mn kagome lattice

Kagome lattice, made of corner-sharing triangles, provides an excellent platform for hosting exotic topological quantum states. Here we systematically studied the magnetic and transport properties of RMn6Sn6 (R = Tb, Dy, Ho) with clean Mn kagome lattice. All the compounds have a collinear ferrimagnetic structure with different easy axis at low temperature. The low-temperature magnetoresistance (MR) is positive and has no tendency to saturate below 7 T, while the MR gradually declines and becomes negative with the increasing temperature. A large intrinsic anomalous Hall conductivity about 250 Ω-1cm-1, 40 Ω-1cm-1, 95 Ω-1cm-1 is observed for TbMn6Sn6, DyMn6Sn6, HoMn6Sn6, respectively. Our results imply that RMn6Sn6 system is an excellent platform to discover other intimately related topological or quantum phenomena and also tune the electronic and magnetic properties in future studies.

cond-mat.supr-con↗

Regularizing Nighttime Weirdness: Efficient Self-supervised Monocular Depth Estimation in the Dark

Monocular depth estimation aims at predicting depth from a single image or video. Recently, self-supervised methods draw much attention since they are free of depth annotations and achieve impressive performance on several daytime benchmarks. However, they produce weird outputs in more challenging nighttime scenarios because of low visibility and varying illuminations, which bring weak textures and break brightness-consistency assumption, respectively. To address these problems, in this paper we propose a novel framework with several improvements: (1) we introduce Priors-Based Regularization to learn distribution knowledge from unpaired depth maps and prevent model from being incorrectly trained; (2) we leverage Mapping-Consistent Image Enhancement module to enhance image visibility and contrast while maintaining brightness consistency; and (3) we present Statistics-Based Mask strategy to tune the number of removed pixels within textureless regions, using dynamic statistics. Experimental results demonstrate the effectiveness of each component. Meanwhile, our framework achieves remarkable improvements and state-of-the-art results on two nighttime datasets.

cs.CV↗

6G Internet of Things: A Comprehensive Survey

The sixth generation (6G) wireless communication networks are envisioned to revolutionize customer services and applications via the Internet of Things (IoT) towards a future of fully intelligent and autonomous systems. In this article, we explore the emerging opportunities brought by 6G technologies in IoT networks and applications, by conducting a holistic survey on the convergence of 6G and IoT. We first shed light on some of the most fundamental 6G technologies that are expected to empower future IoT networks, including edge intelligence, reconfigurable intelligent surfaces, space-air-ground-underwater communications, Terahertz communications, massive ultra-reliable and low-latency communications, and blockchain. Particularly, compared to the other related survey papers, we provide an in-depth discussion of the roles of 6G in a wide range of prospective IoT applications via five key domains, namely Healthcare Internet of Things, Vehicular Internet of Things and Autonomous Driving, Unmanned Aerial Vehicles, Satellite Internet of Things, and Industrial Internet of Things. Finally, we highlight interesting research challenges and point out potential directions to spur further research in this promising area.

eess.SP↗

An optical biomimetic eyes with interested object imaging

We presented an optical system to perform imaging interested objects in complex scenes, like the creature easy see the interested prey in the hunt for complex environments. It utilized Deep-learning network to learn the interested objects's vision features and designed the corresponding "imaging matrices", furthermore the learned matrixes act as the measurement matrix to complete compressive imaging with a single-pixel camera, finally we can using the compressed image data to only image the interested objects without the rest objects and backgrounds of the scenes with the previous Deep-learning network. Our results demonstrate that no matter interested object is single feature or rich details, the interference can be successfully filtered out and this idea can be applied in some common applications that effectively improve the performance. This bio-inspired optical system can act as the creature eye to achieve success on interested-based object imaging, object detection, object recognition and object tracking, etc.

cs.CV↗

Deterministic Time-Bin Entanglement between a Single Photon and an Atomic Ensemble

Hybrid matter-photon entanglement is the building block for quantum networks. It is very favorable if the entanglement can be prepared with a high probability. In this paper, we report the deterministic creation of entanglement between an atomic ensemble and a single photon by harnessing Rydberg blockade. We design a scheme that creates entanglement between a single photon's temporal modes and the Rydberg levels that host a collective excitation, using a process of cyclical retrieving and patching. The hybrid entanglement is tested via retrieving the atomic excitation as a second photon and performing correlation measurements, which suggest an entanglement fidelity of 87.8%. Our source of matter-photon entanglement will enable the entangling of remote quantum memories with much higher efficiency.

quant-ph↗

Federated Learning with Unreliable Clients: Performance Analysis and Mechanism Design

Owing to the low communication costs and privacy-promoting capabilities, Federated Learning (FL) has become a promising tool for training effective machine learning models among distributed clients. However, with the distributed architecture, low quality models could be uploaded to the aggregator server by unreliable clients, leading to a degradation or even a collapse of training. In this paper, we model these unreliable behaviors of clients and propose a defensive mechanism to mitigate such a security risk. Specifically, we first investigate the impact on the models caused by unreliable clients by deriving a convergence upper bound on the loss function based on the gradient descent updates. Our theoretical bounds reveal that with a fixed amount of total computational resources, there exists an optimal number of local training iterations in terms of convergence performance. We further design a novel defensive mechanism, named deep neural network based secure aggregation (DeepSA). Our experimental results validate our theoretical analysis. In addition, the effectiveness of DeepSA is verified by comparing with other state-of-the-art defensive mechanisms.

cs.LG↗

Max-Type and Sum-Type Procedures for Online Change-Point Detection in the Mean of High-Dimensional Data

We propose two procedures to detect a change in the mean of high-dimensional online data. One is based on a max-type U-statistic and another is based on a sum-type U-statistic. Theoretical properties of the two procedures are explored in the high dimensional setting. More precisely, we derive their average run lengths (ARLs) when there is no change point, and expected detection delays (EDDs) when there is a change point. Accuracy of the theoretical results is confirmed by simulation studies. The practical use of the proposed procedures is demonstrated by detecting an abrupt change in PM2.5 concentrations. The current study attempts to extend the results of the CUSUM and Shiryayev-Roberts procedures previously established in the univariate setting.

stat.ME↗

Artin presentations, triangle groups, and 4-manifolds

Gonz{á}lez-Acu{ñ}a showed that Artin presentations characterize closed, orientable $3$-manifold groups. Winkelnkemper later discovered that each Artin presentation determines a smooth, compact, simply-connected $4$-manifold. We utilize triangle groups to find all Artin presentations on two generators that present the trivial group. We then determine all smooth, closed, simply-connected $4$-manifolds with second betti number at most two that appear in Artin presentation theory.

math.GT↗

Einstein-de Haas Effect of Topological Magnons

We predict the existence of Einstein-de Haas effect in topological magnon insulators. Temperature variation of angular momentum in the topological state shows a sign change behavior, akin to the low temperature thermal Hall conductance response. This manifests itself as a macroscopic mechanical rotation of the material hosting topological magnons. We show that an experimentally observable Einstein-de Haas effect can be measured in the square-octagon, the kagome, and the honeycomb lattices. Albeit, the effect is the strongest in the square-octagon lattice. We treat both the low and the high temperature phases using spin wave and Schwinger boson theory, respectively. We propose an experimental set up to detect our theoretical predictions. We suggest candidate square-octagon materials where our theory can be tested.

cond-mat.str-el↗

Single-shot measurement of a Rydberg superatom via collective photon burst

With Rydberg dipole interactions, a mesoscopic atomic ensemble may behave like a two-level single atom, resulting in the so-called picture of superatom. It is in potential a strong candidate as a qubit in quantum information science, especially for efficient coupling with single photons via collective enhancement that is essential for building quantum internet to connect remote quantum computers. Previously, preliminary studies have been carried out in demonstrating basic concept of Rydberg superatom, a single-photon source, and entanglement with a single photon, etc. While a crucial element of single-shot qubit measurement is still missing. Here we realize the deterministic measurement of a superatom qubit via photon burst in a single shot. We make use of a low-finesse ring cavity to enhance the atom-photon interaction and obtain an in-fiber retrieval efficiency of 44%. Harnessing dipole interaction between two Rydberg levels, we may either create a sequence of multiple single photons or nothing, conditioned on the initial qubit state. We achieve a single-shot measurement fidelity of 93.2% in 4.8 us. Our work complements the experimental toolbox of harnessing Rydberg superatom for quantum information applications.

quant-ph↗

KIT Bus: A Shuttle Model for CARLA Simulator

With the continuous development of science and technology, self-driving vehicles will surely change the nature of transportation and realize the automotive industry's transformation in the future. Compared with self-driving cars, self-driving buses are more efficient in carrying passengers and more environmentally friendly in terms of energy consumption. Therefore, it is speculated that in the future, self-driving buses will become more and more important. As a simulator for autonomous driving research, the CARLA simulator can help people accumulate experience in autonomous driving technology faster and safer. However, a shortcoming is that there is no modern bus model in the CARLA simulator. Consequently, people cannot simulate autonomous driving on buses or the scenarios interacting with buses. Therefore, we built a bus model in 3ds Max software and imported it into the CARLA to fill this gap. Our model, namely KIT bus, is proven to work in the CARLA by testing it with the autopilot simulation. The video demo is shown on our Youtube.

cs.RO↗

Federated Learning Over Wireless Channels: Dynamic Resource Allocation and Task Scheduling

With the development of federated learning (FL), mobile devices (MDs) are able to train their local models with private data and sends them to a central server for aggregation, thereby preventing sensitive raw data leakage. In this paper, we aim to improve the training performance of FL systems in the context of wireless channels and stochastic energy arrivals of MDs. To this purpose, we dynamically optimize MDs' transmission power and training task scheduling. We first model this dynamic programming problem as a constrained Markov decision process (CMDP). Due to high dimensions rooted from our CMDP problem, we propose online stochastic learning methods to simplify the CMDP and design online algorithms to obtain an efficient policy for all MDs. Since there are long-term constraints in our CMDP, we utilize Lagrange multipliers approach to tackle this issue. Furthermore, we prove the convergence of the proposed online stochastic learning algorithm. Numerical results indicate that the proposed algorithms can achieve better performance than the benchmark algorithms.

cs.DC↗