arXiv subjects

Jun Li

Publications and source records attributed to Jun Li.

At least 559 records · Page 31Linked to original sources

arXiv2022

Intelligent Amphibious Ground-Aerial Vehicles: State of the Art Technology for Future Transportation

Amphibious ground-aerial vehicles fuse flying and driving modes to enable more flexible air-land mobility and have received growing attention recently. By analyzing the existing amphibious vehicles, we highlight the autonomous fly-driving functionality for the effective uses of amphibious vehicles in complex three-dimensional urban transportation systems. We review and summarize the key enabling technologies for intelligent flying-driving in existing amphibious vehicle designs, identify major technological barriers and propose potential solutions for future research and innovation. This paper aims to serve as a guide for research and development of intelligent amphibious vehicles for urban transportation toward the future.

cs.RO↗

arXiv2022

Temporal and Spatial Online Integrated Calibration for Camera and LiDAR

While camera and LiDAR are widely used in most of the assisted and autonomous driving systems, only a few works have been proposed to associate the temporal synchronization and extrinsic calibration for camera and LiDAR which are dedicated to online sensors data fusion. The temporal and spatial calibration technologies are facing the challenges of lack of relevance and real-time. In this paper, we introduce the pose estimation model and environmental robust line features extraction to improve the relevance of data fusion and instant online ability of correction. Dynamic targets eliminating aims to seek optimal policy considering the correspondence of point cloud matching between adjacent moments. The searching optimization process aims to provide accurate parameters with both computation accuracy and efficiency. To demonstrate the benefits of this method, we evaluate it on the KITTI benchmark with ground truth value. In online experiments, our approach improves the accuracy by 38.5\% than the soft synchronization method in temporal calibration. While in spatial calibration, our approach automatically corrects disturbance errors within 0.4 second and achieves an accuracy of 0.3-degree. This work can promote the research and application of sensor fusion.

cs.RO↗

arXiv2022

Cooling flow regime of a plasma thermal quench

A large class of Laboratory, Space, and Astrophysical plasmas is nearly collisionless. When a localized energy or particle sink, for example, in the form of a radiative cooling spot or a black hole, is introduced into such a plasma, it can trigger a plasma thermal collapse, also known as a thermal quench in tokamak fusion. Here we show that the electron thermal conduction in such a nearly collisionless plasma follows the convective energy transport scaling in itself or in its spatial gradient, due to the constraint of ambipolar transport. As the result, a robust cooling flow aggregates mass toward the cooling spot and the thermal collapse of the surrounding plasma takes the form of four propagating fronts that originate from the radiative cooling spot, along the magnetic field line in a magnetized plasma. The slowest one, which is responsible for deep cooling, is a shock front.

physics.plasm-ph↗

arXiv2022

Network medicine framework reveals generic herb-symptom effectiveness of Traditional Chinese Medicine

Traditional Chinese medicine (TCM) relies on natural medical products to treat symptoms and diseases. While clinical data have demonstrated the effectiveness of selected TCM-based treatments, the mechanistic root of how TCM herbs treat diseases remains largely unknown. More importantly, current approaches focus on single herbs or prescriptions, missing the high-level general principles of TCM. To uncover the mechanistic nature of TCM on a system level, in this work we establish a generic network medicine framework for TCM from the human protein interactome. Applying our framework reveals a network pattern between symptoms (diseases) and herbs in TCM. We first observe that genes associated with a symptom are not distributed randomly in the interactome, but cluster into localized modules; furthermore, a short network distance between two symptom modules is indicative of the symptoms' co-occurrence and similarity. Next, we show that the network proximity of a herb's targets to a symptom module is predictive of the herb's effectiveness in treating the symptom. We validate our framework with real-world hospital patient data by showing that (1) shorter network distance between symptoms of inpatients correlates with higher relative risk (co-occurrence), and (2) herb-symptom network proximity is indicative of patients' symptom recovery rate after herbal treatment. Finally, we identified novel herb-symptom pairs in which the herb's effectiveness in treating the symptom is predicted by network and confirmed in hospital data, but previously unknown to the TCM community. These predictions highlight our framework's potential in creating herb discovery or repurposing opportunities. In conclusion, network medicine offers a powerful novel platform to understand the mechanism of traditional medicine and to predict novel herbal treatment against diseases.

q-bio.MN↗

arXiv2022

RigNet: Repetitive Image Guided Network for Depth Completion

Depth completion deals with the problem of recovering dense depth maps from sparse ones, where color images are often used to facilitate this task. Recent approaches mainly focus on image guided learning frameworks to predict dense depth. However, blurry guidance in the image and unclear structure in the depth still impede the performance of the image guided frameworks. To tackle these problems, we explore a repetitive design in our image guided network to gradually and sufficiently recover depth values. Specifically, the repetition is embodied in both the image guidance branch and depth generation branch. In the former branch, we design a repetitive hourglass network to extract discriminative image features of complex environments, which can provide powerful contextual instruction for depth prediction. In the latter branch, we introduce a repetitive guidance module based on dynamic convolution, in which an efficient convolution factorization is proposed to simultaneously reduce its complexity and progressively model high-frequency structures. Extensive experiments show that our method achieves superior or competitive results on KITTI benchmark and NYUv2 dataset.

cs.CV↗

arXiv2022

Multi-Modal Masked Pre-Training for Monocular Panoramic Depth Completion

In this paper, we formulate a potentially valuable panoramic depth completion (PDC) task as panoramic 3D cameras often produce 360° depth with missing data in complex scenes. Its goal is to recover dense panoramic depths from raw sparse ones and panoramic RGB images. To deal with the PDC task, we train a deep network that takes both depth and image as inputs for the dense panoramic depth recovery. However, it needs to face a challenging optimization problem of the network parameters due to its non-convex objective function. To address this problem, we propose a simple yet effective approach termed M{^3}PT: multi-modal masked pre-training. Specifically, during pre-training, we simultaneously cover up patches of the panoramic RGB image and sparse depth by shared random mask, then reconstruct the sparse depth in the masked regions. To our best knowledge, it is the first time that we show the effectiveness of masked pre-training in a multi-modal vision task, instead of the single-modal task resolved by masked autoencoders (MAE). Different from MAE where fine-tuning completely discards the decoder part of pre-training, there is no architectural difference between the pre-training and fine-tuning stages in our M$^{3}$PT as they only differ in the prediction density, which potentially makes the transfer learning more convenient and effective. Extensive experiments verify the effectiveness of M{^3}PT on three panoramic datasets. Notably, we improve the state-of-the-art baselines by averagely 26.2% in RMSE, 51.7% in MRE, 49.7% in MAE, and 37.5% in RMSElog on three benchmark datasets.

cs.CV↗

arXiv2022

Mix-Teaching: A Simple, Unified and Effective Semi-Supervised Learning Framework for Monocular 3D Object Detection

Monocular 3D object detection is an essential perception task for autonomous driving. However, the high reliance on large-scale labeled data make it costly and time-consuming during model optimization. To reduce such over-reliance on human annotations, we propose Mix-Teaching, an effective semi-supervised learning framework applicable to employ both labeled and unlabeled images in training stage. Mix-Teaching first generates pseudo-labels for unlabeled images by self-training. The student model is then trained on the mixed images possessing much more intensive and precise labeling by merging instance-level image patches into empty backgrounds or labeled images. This is the first to break the image-level limitation and put high-quality pseudo labels from multi frames into one image for semi-supervised training. Besides, as a result of the misalignment between confidence score and localization quality, it's hard to discriminate high-quality pseudo-labels from noisy predictions using only confidence-based criterion. To that end, we further introduce an uncertainty-based filter to help select reliable pseudo boxes for the above mixing operation. To the best of our knowledge, this is the first unified SSL framework for monocular 3D object detection. Mix-Teaching consistently improves MonoFlex and GUPNet by significant margins under various labeling ratios on KITTI dataset. For example, our method achieves around +6.34% AP@0.7 improvement against the GUPNet baseline on validation set when using only 10% labeled data. Besides, by leveraging full training set and the additional 48K raw images of KITTI, it can further improve the MonoFlex by +4.65% improvement on AP@0.7 for car detection, reaching 18.54% AP@0.7, which ranks the 1st place among all monocular based methods on KITTI test leaderboard. The code and pretrained models will be released at https://github.com/yanglei18/Mix-Teaching.

cs.CV↗

arXiv2022

Measuring the modified gravitational waves propagation beyond general relativity from CMB observations

In modified gravity theories, the gravitational waves propagation are presented in nonstandard ways. We consider a friction term different from GR and constrain the modified gravitational waves propagation from observations. The modified gravitational waves produce anisotropies and polarization which generate measurable tensor power spectra. We explore the impact of the friction term on the power spectrum of B-modes and the impact on the constraints on the other parameters (e.g., $r$ or $A_t$) when $ν_0$ is allowed to vary in the Monte Carlo analyses from Planck+BK18 datasets. If we assume the result of the scalar perturbations is unchanged, the inflation consistency relation alters with the friction term. In the $Λ$CDM+$r$+$ν_0$ model, the tensor-to-scalar ratio and the amplitude of tensor spectrum are influenced obviously.

astro-ph.CO↗

arXiv2022

Experimental quantum simulation of non-Hermitian dynamical topological states using stochastic Schrödinger equation

Noise is ubiquitous in real quantum systems, leading to non-Hermitian quantum dynamics, and may affect the fundamental states of matter. Here we report in experiment a quantum simulation of the two-dimensional non-Hermitian quantum anomalous Hall (QAH) model using the nuclear magnetic resonance processor. Unlike the usual experiments using auxiliary qubits, we develop a stochastic average approach based on the stochastic Schrödinger equation to realize the non-Hermitian dissipative quantum dynamics, which has advantages in saving the quantum simulation sources and simplifies implementation of quantum gates. We demonstrate the stability of dynamical topology against weak noise, and observe two types of dynamical topological transitions driven by strong noise. Moreover, a region that the emergent topology is always robust regardless of the noise strength is observed. Our work shows a feasible quantum simulation approach for dissipative quantum dynamics with stochastic Schrödinger equation and opens a route to investigate non-Hermitian dynamical topological physics.

quant-ph↗

arXiv2022

Correlation of the dynamic contact angle with the capillary number and its hysteresis

The moving contact-line problem is of both theoretical and practical interest. The dynamic contact angle changes with the capillary number defined by the contact-line speed, and the correlation also depends on the equilibrium contact angle measured at the static state. This correlation is usually required as an input to the traditional solvers based on the Navier-Stokes-like equations, but it is simulated as an output in the current study using the lattice Boltzmann method (LBM) in a displacement process of two-immiscible fluids. The macroscopic theory and the molecular dynamics (MD) simulation had shown a linear scaling law for the cosine of dynamic contact angle, which is also observed in the previous LBM study in a short range of small capillary numbers and for two neutral wetting conditions. However, our study shows that this linear scaling law holds in the whole range of capillary numbers and is universal for all wetting conditions. In a special case of complete wetting (spreading) with a zero equilibrium contact angle, a thin film of the wetting fluid occurs when the wettability is very strong, which leads to a hysteresis that substantial capillary number is required to initiate the deviation of the dynamic contact angle from its equilibrium state. This observation is consistent with the previous report on a new mechanism for the static contact angle hysteresis due to the presence of free liquid films. With an increasing capillary number, the fluid-fluid interface starts oscillating before fingering. Different fingering patterns are observed for cases with different equilibrium contact angles.

physics.flu-dyn↗

arXiv2022

Novel Valence Transition in Elemental Metal Europium around 80 GPa

Valence transition could induce structural, insulator-metal, nonmagnetic-magnetic and superconducting transitions in rare-earth metals and compounds, while the underlying physics remains unclear due to the complex interaction of localized 4f electrons as well as their coupling with itinerant electrons. The valence transition in the elemental metal europium (Eu) still has remained as a matter of debate. Using resonant x-ray emission scattering and x-ray diffraction, we pressurize the states of 4f electrons in Eu and study its valence and structure transitions up to 160 GPa. We provide compelling evidence for a valence transition around 80 GPa, which coincides with a structural transition from a monoclinic (C2/c) to an orthorhombic phase (Pnma). We show that the valence transition occurs when the pressure-dependent energy gap between 4f and 5d electrons approaches the Coulomb interaction. Our discovery is critical for understanding the electrodynamics of Eu, including magnetism and high-pressure superconductivity.

cond-mat.str-el↗

arXiv2022

Lesion-Aware Contrastive Representation Learning for Histopathology Whole Slide Images Analysis

Local representation learning has been a key challenge to promote the performance of the histopathological whole slide images analysis. The previous representation learning methods followed the supervised learning paradigm. However, manual annotation for large-scale WSIs is time-consuming and labor-intensive. Hence, the self-supervised contrastive learning has recently attracted intensive attention. The present contrastive learning methods treat each sample as a single class, which suffers from class collision problems, especially in the domain of histopathology image analysis. In this paper, we proposed a novel contrastive representation learning framework named Lesion-Aware Contrastive Learning (LACL) for histopathology whole slide image analysis. We built a lesion queue based on the memory bank structure to store the representations of different classes of WSIs, which allowed the contrastive model to selectively define the negative pairs during the training. Moreover, We designed a queue refinement strategy to purify the representations stored in the lesion queue. The experimental results demonstrate that LACL achieves the best performance in histopathology image representation learning on different datasets, and outperforms state-of-the-art methods under different WSI classification benchmarks. The code is available at https://github.com/junl21/lacl.

cs.CV↗

arXiv2022

Kernel Attention Transformer (KAT) for Histopathology Whole Slide Image Classification

Transformer has been widely used in histopathology whole slide image (WSI) classification for the purpose of tumor grading, prognosis analysis, etc. However, the design of token-wise self-attention and positional embedding strategy in the common Transformer limits the effectiveness and efficiency in the application to gigapixel histopathology images. In this paper, we propose a kernel attention Transformer (KAT) for histopathology WSI classification. The information transmission of the tokens is achieved by cross-attention between the tokens and a set of kernels related to a set of positional anchors on the WSI. Compared to the common Transformer structure, the proposed KAT can better describe the hierarchical context information of the local regions of the WSI and meanwhile maintains a lower computational complexity. The proposed method was evaluated on a gastric dataset with 2040 WSIs and an endometrial dataset with 2560 WSIs, and was compared with 6 state-of-the-art methods. The experimental results have demonstrated the proposed KAT is effective and efficient in the task of histopathology WSI classification and is superior to the state-of-the-art methods. The code is available at https://github.com/zhengyushan/kat.

cs.CV↗

arXiv2022

Enhanced low-energy magnetic excitations evidencing the Cu-induced localization in an Fe-based superconductor Fe$_{0.98}$Te$_{0.5}$Se$_{0.5}$

We have performed inelastic neutron scattering measurements on optimally-doped Fe$_{0.98}$Te$_{0.5}$Se$_{0.5}$ and 10% Cu-doped Fe$_{0.88}$Cu$_{0.1}$Te$_{0.5}$Se$_{0.5}$ to investigate the substitution effects on the spin excitations in the whole energy range up to 300 meV. It is found that substitution of Cu for Fe enhances the low-energy spin excitations ($\le$ 100 meV), especially around the (0.5, 0.5) point, and leaves the high-energy magnetic excitations intact. In contrast to the expectation that Cu with spin 1/2 will dilute the magnetic moments contributed by Fe with a larger spin, we find that the 10% Cu doping enlarges the effective fluctuating moment from 2.85 to 3.13 $μ_{\rm B}$/Fe, although there is no long- or short-range magnetic order around (0.5, 0.5) and (0.5, 0). The presence of enhanced magnetic excitations in the 10% Cu doped sample which is in the insulating state indicates that the magnetic excitations must have some contributions from the local moments, reflecting the dual nature of the magnetism in iron-based superconductors. We attribute the substitution effects to the localization of the itinerant electrons induced by Cu dopants. These results also indicate that the Cu doping does not act as electron donor as in a rigid-band shift model, but more as scattering centers that localize the system.

cond-mat.supr-con↗

arXiv2022

Lightweight Projective Derivative Codes for Compressed Asynchronous Gradient Descent

Coded distributed computation has become common practice for performing gradient descent on large datasets to mitigate stragglers and other faults. This paper proposes a novel algorithm that encodes the partial derivatives themselves and furthermore optimizes the codes by performing lossy compression on the derivative codewords by maximizing the information contained in the codewords while minimizing the information between the codewords. The utility of this application of coding theory is a geometrical consequence of the observed fact in optimization research that noise is tolerable, sometimes even helpful, in gradient descent based learning algorithms since it helps avoid overfitting and local minima. This stands in contrast with much current conventional work on distributed coded computation which focuses on recovering all of the data from the workers. A second further contribution is that the low-weight nature of the coding scheme allows for asynchronous gradient updates since the code can be iteratively decoded; i.e., a worker's task can immediately be updated into the larger gradient. The directional derivative is always a linear function of the direction vectors; thus, our framework is robust since it can apply linear coding techniques to general machine learning frameworks such as deep neural networks.

cs.LG↗

arXiv2022

A Self-Guided Framework for Radiology Report Generation

Automatic radiology report generation is essential to computer-aided diagnosis. Through the success of image captioning, medical report generation has been achievable. However, the lack of annotated disease labels is still the bottleneck of this area. In addition, the image-text data bias problem and complex sentences make it more difficult to generate accurate reports. To address these gaps, we pre-sent a self-guided framework (SGF), a suite of unsupervised and supervised deep learning methods to mimic the process of human learning and writing. In detail, our framework obtains the domain knowledge from medical reports with-out extra disease labels and guides itself to extract fined-grain visual features as-sociated with the text. Moreover, SGF successfully improves the accuracy and length of medical report generation by incorporating a similarity comparison mechanism that imitates the process of human self-improvement through compar-ative practice. Extensive experiments demonstrate the utility of our SGF in the majority of cases, showing its superior performance over state-of-the-art meth-ods. Our results highlight the capacity of the proposed framework to distinguish fined-grained visual details between words and verify its advantage in generating medical reports.

cs.CL↗

arXiv2022

Design of optical voltage sensor based on electric field regulation and rotating isomerism electrode

Temperature drift, stress birefringence and low frequency vibration lead to the randomness and fluctuation of the output of optical voltage sensor(OVS). In order to solve the problem, this study adopts the lock-in amplifier technology with the aid of a high-speed rotating electrode to realize electric field modulation. This technology could shift the measured signal frequency band from near 50 Hz moved to several kilometer Hz, so as to make the output signal avoid the interference from low-frequency temperature drift, stress birefringence and vibration, leading to higher stability and reliability. The electro-optic coupling wave theory and static electric field finite element method are utilized to investigate the shape of modulation wave. The simulation results proves that lock-in technology is able to prevent the measured voltage signal from the large step signal interference and restore the perfect original signal. While the sample rate is decreased to the value of the modulation frequency.

eess.SP↗

arXiv2022

Coexistence of Quasi-two-dimensional Superconductivity and Tunable Kondo Lattice in a van der Waals Superconductor

Realization of Kondo lattice in superconducting van der Waals materials not only provides a unique opportunity for tuning the Kondo lattice behavior by electrical gating or intercalation, but also is helpful for further understanding the heavy fermion superconductivity. Here we report a low-temperature and vector-magnetic-field scanning tunneling microscopy and spectroscopy study on a superconducting compound (4Hb-TaS2) with alternate stacking of 1T-TaS2 and 1H-TaS2 layers. We observe the quasi-two-dimensional superconductivity in the 1H-TaS2 layer with anisotropic response to the in-plane and out-of-plane magnetic fields. In the 1T-TaS2 layer, we detect the Kondo resonance peak that results from the Kondo screening of the unpaired electrons in the Star-of-David clusters. We also find the intensity of the Kondo resonance peak is sensitive to its relative position with the Fermi level, and it can be significantly enhanced when it's further shifted towards the Fermi level by evaporating Pb atoms onto the 1T-TaS2 surface. Our results are not only important for fully understanding the electronic properties of 4Hb-TaS2, but also pave the way for creating tunable Kondo lattice in the superconducting van der Waals materials.

cond-mat.supr-con↗