arXiv subjects
Publications and source records attributed to Jun Li.
In this paper, we give the Assouad dimension formula and the upper bound of the lower dimension for homogeneous Moran sets under the condition $\sup_{k\ge 1}\{n_{k}\}<+\infty$. We also give the Assouad spectrum and the lower spectrum formulas for Cantor-like sets.
Reconfigurable intelligent surfaces (RISs) have been recognized as a revolutionary technology for future wireless networks. However, RIS-assisted communications have to continuously tune phase-shifts relying on accurate channel state information (CSI) that is generally difficult to obtain due to the large number of RIS channels. The joint design of CSI acquisition and subsection RIS phase-shifts remains a significant challenge in dynamic environments. In this paper, we propose a diffusion-enhanced decision Transformer (DEDT) framework consisting of a diffusion model (DM) designed for efficient CSI acquisition and a decision Transformer (DT) utilized for phase-shift optimizations. Specifically, we first propose a novel DM mechanism, i.e., conditional imputation based on denoising diffusion probabilistic model, for rapidly acquiring real-time full CSI by exploiting the spatial correlations inherent in wireless channels. Then, we optimize beamforming schemes based on the DT architecture, which pre-trains on historical environments to establish a robust policy model. Next, we incorporate a fine-tuning mechanism to ensure rapid beamforming adaptation to new environments, eliminating the retraining process that is imperative in conventional reinforcement learning (RL) methods. Simulation results demonstrate that DEDT can enhance efficiency and adaptability of RIS-aided communications with fluctuating channel conditions compared to state-of-the-art RL methods.
Quantum critical systems offer promising advancements in quantum sensing and metrology, yet face limitations like critical slowing down and a restricted criticality-enhanced region. Here, we introduce a critical sensing scheme that mitigate critical slowing down by leveraging the non-equilibrium dynamics of a perturbed Ising spin model, coupled with an adaptive strategy to enlarge its sensing interval. We validate the proposed scheme on a superconducting quantum processor and demonstrate that our scheme achieves a Heisenberg scaling with respect to the encoding duration. Additionally, the adaptive strategy tunes the model to operate near its critical point with limited prior information about the parameter, enabling what is known as global sensing. Our work showcases the metrological applications empowered by non-equilibrium critical dynamics and hence opens up a pathway for devising critical quantum sensors.
In recent years, traffic flow prediction has played a crucial role in the management of intelligent transportation systems. However, traditional prediction methods are often limited by static spatial modeling, making it difficult to accurately capture the dynamic and complex relationships between time and space, thereby affecting prediction accuracy. This paper proposes an innovative traffic flow prediction network, SFADNet, which categorizes traffic flow into multiple traffic patterns based on temporal and spatial feature matrices. For each pattern, we construct an independent adaptive spatio-temporal fusion graph based on a cross-attention mechanism, employing residual graph convolution modules and time series modules to better capture dynamic spatio-temporal relationships under different fine-grained traffic patterns. Extensive experimental results demonstrate that SFADNet outperforms current state-of-the-art baselines across four large-scale datasets.
The diffuse gamma-ray emission from the Milky Way serves as a crucial probe for understanding the propagation and interactions of cosmic rays within our galaxy. The Galactic diffuse gamma-ray emission between 10 TeV and 1 PeV has been recently measured by the square kilometer array (KM2A) of the Large High Altitude Air Shower Observatory (LHAASO). The flux is higher than predicted for cosmic rays interacting with the interstellar medium. In this work, we utilize a non-parametric method to derive the source count distribution using the published first LHAASO source catalog. Based on this distribution, we calculate the contribution of unresolved sources to the diffuse emission measured by KM2A. When comparing our results to the measured diffuse gamma-ray emission, we demonstrate that for the outer Galactic region, the contributions from unresolved sources and those predicted by models are roughly consistent with experimental observations within the uncertainty. However, for the inner Galactic region, additional components are required to account for the observed data.
To evaluate and control bubble front penetration depth ${{h}_{B}}$ induced by ablative Rayleigh-Taylor instability (ARTI) from a weakly nonlinear phase to a self-similar phase, we first propose an improved buoyancy-drag (BD) model with a time-varying drag coefficient. The coefficient incorporates the influence of multiple physical mechanisms, including non-steady ablation, preheating, and other mechanisms during this phase. The model is validated through simulations under various conditions, demonstrating improved accuracy compared to the classical BD model and the self-similar growth. Furthermore, the model suggests controlling ${{h}_{B}}$ by suppressing the "most dangerous mode", which is influenced by initial perturbations and ablative acceleration history, thus offering novel insights for target manufacturing and pulse optimization near the ignition threshold.
Unmanned aerial vehicle (UAV) is expected to revolutionize the existing integrated sensing and communication (ISAC) system and promise a more flexible joint design. Nevertheless, the existing works on ISAC mainly focus on exploring the performance of both functionalities simultaneously during the entire considered period, which may ignore the practical asymmetric sensing and communication requirements. In particular, always forcing sensing along with communication may make it is harder to balance between these two functionalities due to shared spectrum resources and limited transmit power. To address this issue, we propose a new integrated periodic sensing and communication mechanism for the UAV-enabled ISAC system to provide a more flexible trade-off between two integrated functionalities. Specifically, the system achievable rate is maximized via jointly optimizing UAV trajectory, user association, target sensing selection, and transmit beamforming, while meeting the sensing frequency and beam pattern gain requirement for the given targets. Despite that this problem is highly non-convex and involves closely coupled integer variables, we derive the closed-form optimal beamforming vector to dramatically reduce the complexity of beamforming design, and present a tight lower bound of the achievable rate to facilitate UAV trajectory design. Based on the above results, we propose a penalty-based algorithm to efficiently solve the considered problem. The optimal achievable rate and the optimal UAV location are analyzed under a special case of infinity number of antennas. Furthermore, we prove the structural symmetry between the optimal solutions in different ISAC frames without location constraints and propose an efficient algorithm for solving the problem with location constraints.
Image dehazing, particularly with learning-based methods, has gained significant attention due to its importance in real-world applications. However, relying solely on the RGB color space often fall short, frequently leaving residual haze. This arises from two main issues: the difficulty in obtaining clear textural features from hazy RGB images and the complexity of acquiring real haze/clean image pairs outside controlled environments like smoke-filled scenes. To address these issues, we first propose a novel Structure Guided Dehazing Network (SGDN) that leverages the superior structural properties of YCbCr features over RGB. It comprises two key modules: Bi-Color Guidance Bridge (BGB) and Color Enhancement Module (CEM). BGB integrates a phase integration module and an interactive attention module, utilizing the rich texture features of the YCbCr space to guide the RGB space, thereby recovering clearer features in both frequency and spatial domains. To maintain tonal consistency, CEM further enhances the color perception of RGB features by aggregating YCbCr channel information. Furthermore, for effective supervised learning, we introduce a Real-World Well-Aligned Haze (RW$^2$AH) dataset, which includes a diverse range of scenes from various geographical regions and climate conditions. Experimental results demonstrate that our method surpasses existing state-of-the-art methods across multiple real-world smoke/haze datasets. Code and Dataset: \textcolor{blue}{\url{https://github.com/fiwy0527/AAAI25_SGDN.}}
The speckle field yielded by disordered media is extensively employed for spectral measurements. Existing speckle reconstructive spectrometers (RSs) implemented by neural networks primarily rely on supervised learning, which necessitates large-scale spectra-speckle pairs. However, beyond system stability requirements for prolonged data collection, generating diverse spectra with high resolution and finely labeling them is particularly difficult. A lack of variety in datasets hinders the generalization of neural networks to new spectrum types. Here we avoid this limitation by introducing PhyspeNet, an untrained spectrum reconstruction framework combining a convolutional neural network (CNN) with a physical model of a chaotic optical cavity. Without pre-training and prior knowledge about the spectrum under test, PhyspeNet requires only a single captured speckle for various multi-wavelength reconstruction tasks. Experimentally, we demonstrate a lens-free, snapshot RS system by leveraging the one-to-many mapping between spatial and spectrum domains in a random medium. Dual-wavelength peaks separated by 2 pm can be distinguished, and a maximum working bandwidth of 40 nm is achieved with high measurement accuracy. This approach establishes a new paradigm for neural network-based RS systems, entirely eliminating reliance on datasets while ensuring that computational results exhibit a high degree of generalizability and physical explainability.
Density Functional Theory (DFT) stands as a widely used and efficient approach for addressing the many-electron Schrödinger equation across various domains such as physics, chemistry, and biology. However, a core challenge that persists over the long term pertains to refining the exchange-correlation (XC) approximation. This approximation significantly influences the triumphs and shortcomings observed in DFT applications. Nonetheless, a prevalent issue among XC approximations is the presence of systematic errors, stemming from deviations from the mathematical properties of the exact XC functional. For example, although both B3LYP and DM21 (DeepMind 21) exhibit improvements over previous benchmarks, there is still potential for further refinement. In this paper, we propose a strategy for enhancing XC approximations by estimating the neural uncertainty of the XC functional, named Residual XC-Uncertain Functional. Specifically, our approach involves training a neural network to predict both the mean and variance of the XC functional, treating it as a Gaussian distribution. To ensure stability in each sampling point, we construct the mean by combining traditional XC approximations with our neural predictions, mitigating the risk of divergence or vanishing values. It is crucial to highlight that our methodology excels particularly in cases where systematic errors are pronounced. Empirical outcomes from three benchmark tests substantiate the superiority of our approach over existing state-of-the-art methods. Our approach not only surpasses related techniques but also significantly outperforms both the popular B3LYP and the recent DM21 methods, achieving average RMSE improvements of 62\% and 37\%, respectively, across the three benchmarks: W4-17, G21EA, and G21IP.
The extraction of spatial-temporal features is a crucial research in transportation studies, and current studies typically use a unified temporal modeling mechanism and fixed spatial graph for this purpose. However, the fixed spatial graph restricts the extraction of spatial features for similar but not directly connected nodes, while the unified temporal modeling mechanism overlooks the heterogeneity of temporal variation of different nodes. To address these challenges, a multi-view fusion neural network (MVFN) approach is proposed. In this approach, spatial local features are extracted through the use of a graph convolutional network (GCN), and spatial global features are extracted using a cosine re-weighting linear attention mechanism (CLA). The GCN and CLA are combined to create a graph-cosine module (GCM) for the extraction of overall spatial features. Additionally, the multi-channel separable temporal convolutional network (MSTCN) makes use of a multi-channel temporal convolutional network (MTCN) at each layer to extract unified temporal features, and a separable temporal convolutional network (STCN) to extract independent temporal features. Finally, the spatial-temporal feature data is input into the prediction layer to obtain the final result. The model has been validated on two traffic demand datasets and achieved the best prediction accuracy.
Traffic flow prediction plays a crucial role in the management and operation of urban transportation systems. While extensive research has been conducted on predictions for individual transportation modes, there is relatively limited research on joint prediction across different transportation modes. Furthermore, existing multimodal traffic joint modeling methods often lack flexibility in spatial-temporal feature extraction. To address these issues, we propose a method called Graph Sparse Attention Mechanism with Bidirectional Temporal Convolutional Network (GSABT) for multimodal traffic spatial-temporal joint prediction. First, we use a multimodal graph multiplied by self-attention weights to capture spatial local features, and then employ the Top-U sparse attention mechanism to obtain spatial global features. Second, we utilize a bidirectional temporal convolutional network to enhance the temporal feature correlation between the output and input data, and extract inter-modal and intra-modal temporal features through the share-unique module. Finally, we have designed a multimodal joint prediction framework that can be flexibly extended to both spatial and temporal dimensions. Extensive experiments conducted on three real datasets indicate that the proposed model consistently achieves state-of-the-art predictive performance.
Multimodal tracking has garnered widespread attention as a result of its ability to effectively address the inherent limitations of traditional RGB tracking. However, existing multimodal trackers mainly focus on the fusion and enhancement of spatial features or merely leverage the sparse temporal relationships between video frames. These approaches do not fully exploit the temporal correlations in multimodal videos, making it difficult to capture the dynamic changes and motion information of targets in complex scenarios. To alleviate this problem, we propose a unified multimodal spatial-temporal tracking approach named STTrack. In contrast to previous paradigms that solely relied on updating reference information, we introduced a temporal state generator (TSG) that continuously generates a sequence of tokens containing multimodal temporal information. These temporal information tokens are used to guide the localization of the target in the next time state, establish long-range contextual relationships between video frames, and capture the temporal trajectory of the target. Furthermore, at the spatial level, we introduced the mamba fusion and background suppression interactive (BSI) modules. These modules establish a dual-stage mechanism for coordinating information interaction and fusion between modalities. Extensive comparisons on five benchmark datasets illustrate that STTrack achieves state-of-the-art performance across various multimodal tracking scenarios. Code is available at: https://github.com/NJU-PCALab/STTrack.
Self-supervised video hashing (SSVH) is a practical task in video indexing and retrieval. Although Transformers are predominant in SSVH for their impressive temporal modeling capabilities, they often suffer from computational and memory inefficiencies. Drawing inspiration from Mamba, an advanced state-space model, we explore its potential in SSVH to achieve a better balance between efficacy and efficiency. We introduce S5VH, a Mamba-based video hashing model with an improved self-supervised learning paradigm. Specifically, we design bidirectional Mamba layers for both the encoder and decoder, which are effective and efficient in capturing temporal relationships thanks to the data-dependent selective scanning mechanism with linear complexity. In our learning strategy, we transform global semantics in the feature space into semantically consistent and discriminative hash centers, followed by a center alignment loss as a global learning signal. Our self-local-global (SLG) paradigm significantly improves learning efficiency, leading to faster and better convergence. Extensive experiments demonstrate S5VH's improvements over state-of-the-art methods, superior transferability, and scalable advantages in inference efficiency. Code is available at https://github.com/gimpong/AAAI25-S5VH.
With the rapid development of autonomous driving, LiDAR-based 3D Human Pose Estimation (3D HPE) is becoming a research focus. However, due to the noise and sparsity of LiDAR-captured point clouds, robust human pose estimation remains challenging. Most of the existing methods use temporal information, multi-modal fusion, or SMPL optimization to correct biased results. In this work, we try to obtain sufficient information for 3D HPE only by modeling the intrinsic properties of low-quality point clouds. Hence, a simple yet powerful method is proposed, which provides insights both on modeling and augmentation of point clouds. Specifically, we first propose a concise and effective density-aware pose transformer (DAPT) to get stable keypoint representations. By using a set of joint anchors and a carefully designed exchange module, valid information is extracted from point clouds with different densities. Then 1D heatmaps are utilized to represent the precise locations of the keypoints. Secondly, a comprehensive LiDAR human synthesis and augmentation method is proposed to pre-train the model, enabling it to acquire a better human body prior. We increase the diversity of point clouds by randomly sampling human positions and orientations and by simulating occlusions through the addition of laser-level masks. Extensive experiments have been conducted on multiple datasets, including IMU-annotated LidarHuman26M, SLOPER4D, and manually annotated Waymo Open Dataset v2.0 (Waymo), HumanM3. Our method demonstrates SOTA performance in all scenarios. In particular, compared with LPFormer on Waymo, we reduce the average MPJPE by $10.0mm$. Compared with PRN on SLOPER4D, we notably reduce the average MPJPE by $20.7mm$.
In this paper, we study the challenging problem of simultaneously removing haze and estimating depth from real monocular hazy videos. These tasks are inherently complementary: enhanced depth estimation improves dehazing via the atmospheric scattering model (ASM), while superior dehazing contributes to more accurate depth estimation through the brightness consistency constraint (BCC). To tackle these intertwined tasks, we propose a novel depth-centric learning framework that integrates the ASM model with the BCC constraint. Our key idea is that both ASM and BCC rely on a shared depth estimation network. This network simultaneously exploits adjacent dehazed frames to enhance depth estimation via BCC and uses the refined depth cues to more effectively remove haze through ASM. Additionally, we leverage a non-aligned clear video and its estimated depth to independently regularize the dehazing and depth estimation networks. This is achieved by designing two discriminator networks: $D_{MFIR}$ enhances high-frequency details in dehazed videos, and $D_{MDR}$ reduces the occurrence of black holes in low-texture regions. Extensive experiments demonstrate that the proposed method outperforms current state-of-the-art techniques in both video dehazing and depth estimation tasks, especially in real-world hazy scenes. Project page: https://fanjunkai1.github.io/projectpage/DCL/index.html.
Achieving efficient, high-fidelity, high-resolution garment simulation is challenging due to its computational demands. Conversely, low-resolution garment simulation is more accessible and ideal for low-budget devices like smartphones. In this paper, we introduce a lightweight, learning-based method for garment dynamic super-resolution, designed to efficiently enhance high-resolution, high-frequency details in low-resolution garment simulations. Starting with low-resolution garment simulation and underlying body motion, we utilize a mesh-graph-net to compute super-resolution features based on coarse garment dynamics and garment-body interactions. These features are then used by a hyper-net to construct an implicit function of detailed wrinkle residuals for each coarse mesh triangle. Considering the influence of coarse garment shapes on detailed wrinkle performance, we correct the coarse garment shape and predict detailed wrinkle residuals using these implicit functions. Finally, we generate detailed high-resolution garment geometry by applying the detailed wrinkle residuals to the corrected coarse garment. Our method enables roll-out prediction by iteratively using its predictions as input for subsequent frames, producing fine-grained wrinkle details to enhance the low-resolution simulation. Despite training on a small dataset, our network robustly generalizes to different body shapes, motions, and garment types not present in the training data. We demonstrate significant improvements over state-of-the-art alternatives, particularly in enhancing the quality of high-frequency, fine-grained wrinkle details.
This paper introduces a novel one-hop sub-query result cache for processing graph read transactions, gR-Txs, in a graph database system. The one-hop navigation is from a vertex using either its in-coming or out-going edges with selection predicates that filter edges and vertices. Its cache entry identifies a unique one-hop sub-query (key) and its result set consisting of immutable vertex ids (value). When processing a gR-Tx, the query processor identifies its sequence of individual one-hop sub-queries and looks up their results in the cache. A cache hit fetches less data from the storage manager and eliminates the requirement to process the one-hop sub-query. A cache miss populates the cache asynchronously and in a transactional manner, maintaining the separation of read and write paths of our transactional storage manager. A graph read and write transaction, gRW-Tx, identifies the impacted cache entries and either deletes or updates them. Our implementation of the cache is inside the graph query processing engine and transparent to a user application. We evaluate the cache using our eCommerce production workload and with rules that re-write graph queries to maximize the performance enhancements observed with the cache. Obtained results show the cache enhances 95th and 99th percentile of query response times by at least 2x and 1.63x, respectively. When combined with query re-writing, the enhancements are at least 2.33x and 4.48x, respectively. An interesting result is the significant performance enhancement observed by the indirect beneficiaries of the cache, gRW-Txs and gR-Txs that do not reference one-hop sub-queries. The cache frees system resources to expedite their processing significantly.