arXiv subjects

Julien Proust

Publications and source records attributed to Julien Proust.

5 recordsLinked to original sources

arXiv2025

Plasmon-interband hybridization and anomalous production of hot electrons in aluminum nanoantennas

Strong coupling typically occurs between two separate objects or between an object and its environment (such as an atom and a cavity). However, it can also occur between two different excitations within the same object, a situation that has been much less studied. In this study, we observe strong coupling between localized surface plasmon resonances and the interband transition in aluminum nanorods, as evidenced by optical spectroscopy and electron energy loss spectroscopy, and corroborated with numerical simulations. Strong coupling is observed between the interband transition and multiple orders of the surface plasmon mode, including dark ones. We also obtain experimental maps of the hybrid modes at the nanoscale. In each case, the associated Rabi energy, which corresponds to the energy splitting between the two polaritonic branches, is obtained. Finally, a dedicated numerical model was employed to calculate the hot electron generation rate in the nanorods. The calculations demonstrate that efficient generation of hot electrons can be achieved in the near-infrared region, when the interband transition is strongly coupled with a plasmon resonance. This high generation rate stems from the hybrid nature of the mode, as its plasmonic component provides a high absorption cross-section, while the IT part ensures efficient conversion to hot electrons. Consequently, aluminum nanorods represent an efficient source of hot electrons in the visible and near-infrared regions, with potential applications in local photochemistry, photodetection, and solar energy harvesting.

physics.optics↗

arXiv2022

Colloidal Synthesis of Crystalline Aluminum Nanoparticles for UV Plasmonics

Numerous applications of nanotechnologies rely on the wide availability of high-quality crystalline nanoparticles (NPs). Although the chemical synthesis of noble metal nanoparticles (gold and silver) is well mastered, pushing the optical response of metallic nanoparticles towards the ultraviolet requires other materials, such as aluminum. Although a few demonstrations of chemical synthesis of Al nanoparticles have been reported so far, an elaboration path allowing for a wide range of NP size that is compatible with mass production has yet to be demonstrated. In this article, we report on the production of spherical, size-controlled crystalline Al NPs starting from commercial Al foils and without the use of a catalyst. The proposed method combines sonochemistry with solvochemistry and is fully up-scalable. The obtained NPs have a 10-100 nm crystalline Al core surrounded by a thin alumina shell, allowing long-term stability in ethanol. Well-defined plasmonic resonances in the UV and visible ranges are experimentally evidenced on single nanoparticles.

cond-mat.mtrl-sci↗

arXiv2021

Hybridization and Dehybridization of Plasmonic Modes

The plasmon resonances (modes) of a metal nanostructure can be defined as a dipole, a quadrupole, or high-order modes depending on the surface charge distribution induced by the incident field. In a non-symmetrical environment or clusters, the modes can hybridize and exhibit different behavior and properties. In this work, we study experimentally and numerically the substrate-induced hybridization of plasmonic modes of a silver nanocylinder. The applications of plasmonic nanoparticles such as refractive index sensing and enhanced spectroscopies often rely on the sustained mode spectral position and specific spatial near-field distribution. However, we show that the implementation of such plasmonic nanoparticles in a sensing system can result in a change of the modes nature, its hybridization or dehybridization. These changes are not clearly pronounced in the far-field spectra and then may result in unexpected modifications of the sensor behavior. We show that the hybridization between the dipolar and quadrupolar modes of the plasmonic nanoparticle on the substrate results from quadrupolar mode excitation due to the superposition of the reflected and incoming light and, then, depends on the reflection of the substrate. The existence of the hybridized modes strongly depends on the surrounding environment of nanoparticles, and after the deposition of the nanometric polymer layer on top of the nanoparticle the hybridized modes vanish and are replaced by uncoupled multipolar resonances.

physics.optics↗

arXiv2021

Synthesis of metallic nanoparticles for heterogeneous catalysis: Application to the Direct Borohydride Fuel Cell

Until now, the fabrication of electrocatalysts to guarantee long life of fuel cells and low consumption of noble metals remains a major challenge. The electrocatalysts based on metals or metal oxides which are used today are limited by the complexity of their synthesis processes and require several steps before depositing the catalysts on the substrate. Herein is described a chemical synthesis process that consists of a single-step synthesis and direct deposition of catalysts nanoparticles such as gold (Au), palladium (Pd) and platinum (Pt) in the thickness of a carbon-fibers-based porous transport layer (PTL). The synthesis process essentially consists of dissolving in the same PGMEA (Propylene glycol methyl ether acetate) solvent a metal precursor (HAuCl4 or PdNO2 or PtCl4) and a homopolymer PMMA (Polymethylmetacrylate), then the metal solution is deposited on the surface of the PTL after cleaning. Special emphasis is made on Pt-based materials. The obtained PTL-supported nanoparticles were firstly characterized by scanning electron microscopy (SEM) to evaluate their morphology, and then X-Ray diffraction (XRD) to observe the crystal phases. To validate the methodology, Pt-coated PTL materials have been used as anode for the borohydride oxidation reaction (BOR) in a direct borohydride fuel cell (DBFC) and compared to a state-of-the-art nickel electrode. There is an optimum loading of platinum (below 0.16 mg Pt/cm2) which constitutes the best compromise between power density and faradic efficiency for the borohydride oxidation reaction (BOR). Thanks to this low Pt loading, hydrogen evolved during the anodic reaction is completely valorized. These electrodes combine the advantages of high-performance with a very low metal loading, hence lowering materials cost.

physics.app-ph↗

arXiv2016

Enhancement and Inhibition of Spontaneous Photon Emission by Resonant Silicon Nanoantennas

Substituting noble metals for high-index dielectrics has recently been proposed as an alternative strategy in nanophotonics to design broadband optical resonators and circumvent the ohmic losses of plasmonic materials. In this report, we demonstrate that subwavelength silicon nanoantennas can manipulate the photon emission dynamics of fluorescent molecules. In practice, it is showed that dielectric nanoantennas can both increase and decrease the local density of optical states (LDOS) at room temperature, a process that is inaccessible with noble metals at the nanoscale. Using scanning probe microscopy, we analyze quantitatively, in three dimensions, the near-field interaction between a 100 nm fluorescent nanosphere and silicon nanoantennas with diameters ranging between 170 nm and 250 nm. Associated to numerical simulations, these measurements indicate increased or decreased total spontaneous decay rates by up to 15 % and a gain in the collection efficiency of emitted photons by up to 85 %. Our study demonstrates the potential of silicon-based nanoantennas for the low-loss manipulation of solid-state emitters at the nanoscale and at room temperature.

physics.optics↗