arXiv subjects

Jules Colas

Publications and source records attributed to Jules Colas.

7 recordsLinked to original sources

arXiv2026

Characterization of Aluminum Microwave SQUID Multiplexers for CE$\nu$NS Detection

We present the design, fabrication, and characterization of an aluminum-based six-channel microwave SQUID multiplexer ($\mu$MUX) prototype for transition-edge sensor (TES) readout in the RICOCHET experiment. The device consists of aluminum coplanar-waveguide resonators and RF SQUIDs with Dolan-style Al/AlO$_x$/Al Josephson junctions. By measuring the resonator scattering parameters at a range of probe tone frequencies, powers, and flux bias points, we demonstrate agreement between the device response and existing multiplexer models. We also characterize the noise performance in both open-loop and flux-ramping modes. With a high electron mobility transistor (HEMT) amplifier, open-loop measurements yield a flux sensitivity of 1-1.5 $\mu\Phi_0/\sqrt{Hz}$. With flux-ramp modulation, low-frequency 1/f noise is suppressed, and the flux sensitivity is around 3-4 $\mu\Phi_0/\sqrt{Hz}$, corresponding to a current sensitivity of 24-33 $pA/\sqrt{Hz}$ at the input coil. We further demonstrate a reduction in readout noise by incorporating a Josephson traveling-wave parametric amplifier (JTWPA) between the $\mu$MUX and the HEMT. This achieves an open-loop flux sensitivity of 0.3-0.6 $\mu\Phi_0/\sqrt{Hz}$ and an effective system noise temperature below 1 K. These results establish aluminum $\mu$MUX devices as a viable and extensible readout technology for low-noise cryogenic detector arrays.

physics.ins-det↗

arXiv2025

Wake-induced variations in noise levels and amplitude modulation for two interacting wind turbines

The influence of turbine-turbine interactions on sound propagation is investigated using numerical simulations. Three configurations are examined: turbines aligned downstream of each other, placed side by side, and arranged in a staggered pattern. The simulation framework combines large-eddy simulations for aerodynamic interactions, an aeroacoustic source model to simulate turbine sound emission, and parabolic equation methods for sound propagation. When a second turbine is positioned directly downstream, wake-induced flow focusing enhances sound pressure levels (SPL) and amplitude modulation (AM) by several decibels downwind. In side-by-side and staggered configurations, SPL increases are limited (<2 dBA), and AM is generally reduced due to spatial averaging. Distinct AM patterns emerge in regions where acoustic contributions from both turbines are comparable. For identical rotor speeds, AM is strongly affected by the angular offset between rotors. When rotor speeds differ slightly, beating effects occur, resulting in intermittent AM. These findings highlight the sensitivity of AM to rotor dynamics, a key factor influencing sound perception, with implications for environmental impact and turbine siting.

physics.flu-dyn↗

arXiv2025

Characterization of mini-CryoCube detectors from the Ricochet experiment commissioning at the Institut Laue-Langevin

The Ricochet experiment aims to measure the coherent elastic neutrino-nucleus scattering process from antineutrinos emitted by a research nuclear reactor operated by the Institut Laue-Langevin (Grenoble, France). This article presents a description of the Ricochet experimental installation and the detector performance achieved during its commissioning with a mini-CryoCube module consisting of three 42-gram germanium cryogenic calorimeters. The baseline resolutions and background levels are reported both during reactor-on and reactor-off periods, and as noise mitigation techniques were improved. A baseline resolution of 40 eV electron equivalent was achieved for the ionization channel after setup improvements, and the phonon channel resolutions ranged from 50 to 80 eV of total phonon energy. In the energy region from 2 to 7 keV, a nuclear recoil rate of 15(2) events/(kg day keV) is measured during the reactor-off period selecting events in coincidence with muon veto signals. This rate is in agreement with the cosmogenic neutron rate calculated from GEANT4 simulations. After the rejection of events in coincidence with signals in the muon veto detectors, a combined 90% C.L. limit on the nuclear recoil background of < 9 events/(kg day keV) is obtained in that energy region during the reactor-on period, which is compatible with our GEANT4 model calculation corresponding to a total rate of 5 events/(kg day keV). The sensitivity of this analysis was however found to be limited by a surface event contamination which is currently being addressed by the Ricochet Collaboration with upgraded detectors.

hep-ex↗

arXiv2023

Characterization of the phonon sensor of the CRYOSEL detector with IR photons

The sensitivities of light Dark Matter (DM) particle searches with cryogenic detectors are mostly limited by large backgrounds of events that do not produce ionization signal. The CRYOSEL project develops a new technique where this background in a germanium cryogenic detector is rejected by using the signals from a Superconducting Single Electron Device (SSED) sensor designed to detect the phonons emitted through the Neganov-Trofimov-Luke effect by the e$^-$h$^+$ pairs as they drift in a close-by very high-field region. A tag on signals from this device should suppress the heat-only background. The measurement of the response to IR laser pulses of the first CRYOSEL prototype show the relevance of such sensor technology.

physics.ins-det↗

arXiv2023

Wind turbine sound propagation: Comparison of a linearized Euler equations model with parabolic equation methods

Noise generated by wind turbines is significantly impacted by its propagation in the atmosphere. Hence, for annoyance issues an accurate prediction of sound propagation is critical to determine noise levels around wind turbines. This study presents a method to predict wind turbine sound propagation based on linearized Euler equations. We compare this approach to the parabolic equation method, which is widely used since it captures the influence of atmospheric refraction, ground reflection, and sound scattering at a low computational cost. Using the linearized Euler equations is more computationally demanding but can reproduce more physical effects as fewer assumptions are made. An additional benefit of the linearized Euler equations is that they provide a time-domain solution. To compare both approaches, we simulate sound propagation in two distinct scenarios. In the first scenario, a wind turbine is situated on flat terrain; in the second, a turbine is situated on a hilltop. The results show that both methods provide similar noise predictions in the two scenarios. We find that while some differences in the propagation results are observed in the second case, the final predictions for a broadband extended source are similar between the two methods.

physics.flu-dyn↗

arXiv2022

Effect of a 2D Hill on the Propagation of Wind Turbine Noise

A good understanding of wind turbine noise propagation is relevant to better measure the impact of turbines on the environment. In this study, we developed numerical simulations to study the impact of a 2D hill on the sound propagation for a turbine in non flat terrain. The simulations employed a propagation model derived from the linearized Euler equations, solved in a moving frame following the wavefront. The wind turbine noise was modeled using a point source approach. The flow structure in the atmospheric boundary layer and the wind turbine wake were obtained from large-eddy simulations. We find that the wind turbine wake acts as a waveguide that focuses sound propagation towards the ground. This effect is most pronounced for the flat terrain case and when the turbine is placed on the hill. The sound attenuation is more localized and closer to the turbine when the wind turbine is placed on the hilltop than in the flat case. As the wind speed increases, the sound focusing is observed closer to the turbine. For a turbine placed in front of the hill, the sound propagation is mainly determined by the flow over the hill. This demonstrates that terrain topography can have surprising effects on wind turbine noise propagation.

physics.flu-dyn↗

arXiv2019

Contact-less phonon detection with massive cryogenic absorbers

We have developed a contact-less technique for the real time measurement of a-thermal (Cooper-pair breaking) phonons in an absorber held at sub-Kelvin temperatures. In particular, a thin-film aluminum superconducting resonator was realized on a 30-grams high-resistivity silicon crystal. The lumped-element resonator is inductively excited/read-out by a radio-frequency microstrip feed-line deposited on another wafer; the sensor, a Kinetic Inductance Detector (KID), is read-out without any physical contact or wiring to the absorber. The resonator demonstrates excellent electrical properties, particularly in terms of its internal quality factor. The detection of alphas and gammas in the massive absorber is achieved, with an RMS energy resolution of about 1.4 keV, which is already interesting for particle physics applications. The resolution of this prototype detector is mainly limited by the low (about 0.3%) conversion efficiency of deposited energy to superconducting excitations (quasi-particles). The demonstrated technique can be further optimized, and used to produce large arrays of a-thermal phonon detectors, for use in rare events searches such as: dark matter direct detection,neutrino-less double beta decay, or coherent elastic neutrino-nucleus scattering.

physics.ins-det↗