arXiv subjects

Judith Mwakalonge

Publications and source records attributed to Judith Mwakalonge.

16 recordsLinked to original sources

arXiv2026

Human Driver Temperament and the Safety Impact of a C-V2X Denial-of-Service Flooding Attack in Mixed-Autonomy Traffic

Cooperative and connected automated vehicles (CAVs) rely on Signal Phase and Timing (SPaT) messages to cross signalized intersections; a denial-of-service (DoS) flood that blocks SPaT forces CAVs into a fail-safe mode. Because human-driven vehicles share the intersection, the safety consequence depends not only on the attack and the CAV fail-safe policy, but on how the surrounding human drivers behave. We investigate this human-factors dimension with a coupled OMNeT++/INET (5G NR-V2X) and SUMO microsimulation of a signalized corridor, sweeping CAV market penetration (10-90%), four calibrated driver temperaments (cautious to aggressive) and two standards-based fail-safe policies, a minimal-risk maneuver (MRM) and an adaptive cruise control (ACC) keep-driving fallback, with each attack arm differenced against its policy-matched no-attack baseline. Temperament's effect on the attack is specific and modest rather than a blanket amplification. Aggressive surroundings worsen one metric, the hard-braking a keep-driving fail-safe forces on nearby drivers (p = 0.03), rising from near zero to +8 episodes/1000 veh-s. They appear to dampen rear-end conflicts, but only because the flood clears the queues aggressive drivers build, so the gain is in flow, not safety. On the attack's primary signatures, CAV red-light running and crossing conflicts, temperament has no detectable effect. It instead dominates baseline risk, producing a 13- to 18-fold cautious-to-aggressive gradient far larger than the attack itself, which acts through a channel already congested by CAV adoption. Human driver populations determine how dangerous the intersection is but do not systematically amplify this attack, so fail-safe design cannot assume a cautious test population bounds the risk.

cs.HC↗

arXiv2026

NS3Learn: Transferring 5G NR Mode-2 Reception Realism from ns-3 to the Veins/SUMO Stack for Connected-Vehicle Safety Assessment

Connected-vehicle safety evaluations rely on coupled traffic and network simulations, but standard channel models ignore radio resource competition in 5G NR sidelink Mode-2, reporting unrealistically high message delivery in dense traffic. This study introduces resource-competition losses without requiring full protocol reimplementation. We labeled 10.5 million reception outcomes from ns-3 5G-LENA traces (calibrated on 3GPP scenarios and driven by SUMO trajectories) to fit NS3Learn - a closed-form model capturing half-duplex loss, scheduling collisions, receiver capture, and decoding. Evaluation spanned two signalized urban networks, six penetration levels (1-100%), and five random seeds per condition. NS3Learn achieved a mean absolute deviation of 0.06 in per-instant delivery compared to ns-3 5G-LENA, outperforming alternative models (0.44 and 0.55 deviation). Fitted parameters transferred to a distinct intersection with only 20% additional error. Crucially, using realistic communication models reversed simulated traffic speed trends and more than doubled predicted hard-braking events. The framework transfers reception realism between simulators via model distillation instead of full reimplementation. Every stage maps directly to an explicit physical mechanism. Researchers and transportation agencies can maintain existing simulation pipelines while accurately accounting for dense-traffic packet loss and denial-of-service impacts. Adapting to new radio configurations requires only offline refitting rather than code modification.

cs.NI↗

arXiv2026

Weather Data Spoofing Attacks on Rain-Adaptive Millimeter-Wave Frequency Selection in V2X Communication Networks

Connected vehicles use millimeter-wave (mmWave) sidelinks for the data rates cooperative driving demands, and emerging designs select the carrier band from sensed rainfall. We show that this weather awareness is an attack surface: an adversary who spoofs only the rainfall input dictates the victim's carrier frequency, and through it its communication range, without transmitting on the channel. We evaluate the attack in MilliCar, an ns-3 module that runs the selected band as the real 3GPP NR V2X carrier with per-band propagation, beamforming, and blockage. Forcing the band up to 73 GHz holds an eight-vehicle platoon's reliable range at 38 m while the honest baseline doubles it to 82 m; forcing it down to 5 GHz sustains 97% long-range reception but collapses the transport block to a third and quadruples long-range latency to 12.5 ms. We then implement the defense the mechanism implies. Rain loss grows linearly with distance while path loss grows logarithmically, so a receiver that tests measured SINR against the attenuation its reported weather predicts flags force-up with 98% probability within 1.5 s at a 1% false-alarm rate, and re-selection then restores long-range reception from 60% to 75%. The same test is structurally blind to force-down, because the 5 GHz fallback is nearly rain-immune. An advecting rain cell that swings the local rate from 15 to 81 mm/h leaves every result unchanged. Weather-aware band selection therefore requires an authenticated meteorological input; physical cross-checking covers one half of the threat.

cs.CR↗

arXiv2026

Mitigating Degradation Attacks in Cooperative Autonomous Driving via Intention Sharing: A Vehicle-in-the-Loop Study

Communication delays induced by cyber attacks present a critical challenge to the safe operation of connected autonomous driving. This study investigates the use of intention sharing communication strategy to enhance the resilience of model predictive controllers under Denial-of-Service attacks. We employ a vehicle-in-the-loop testbed integrating a real drive-by-wire vehicle with a microscopic traffic simulator and vehicle-to-X communication infrastructure. We emulate Denial-of-service attacks that induce communication delays of up to two seconds. We evaluate three controller variants: baseline status-sharing, intention-sharing, and delay-aware intention-sharing control. Experimental results reveal that while baseline control suffers significant performance degradation and frequent collisions under adversarial delay, intention sharing eliminates collisions and maintains behavior near nominal levels for the tested scenarios. These findings demonstrate the practical potential of intention-sharing architectures for safeguarding connected vehicles against network-layer degradation.

eess.SY↗

arXiv2025

A Prescriptive Framework for Determining Optimal Days for Short-Term Traffic Counts

The Federal Highway Administration (FHWA) mandates that state Departments of Transportation (DOTs) collect reliable Annual Average Daily Traffic (AADT) data. However, many U.S. DOTs struggle to obtain accurate AADT, especially for unmonitored roads. While continuous count (CC) stations offer accurate traffic volume data, their implementation is expensive and difficult to deploy widely, compelling agencies to rely on short-duration traffic counts. This study proposes a machine learning framework, the first to our knowledge, to identify optimal representative days for conducting short count (SC) data collection to improve AADT prediction accuracy. Using 2022 and 2023 traffic volume data from the state of Texas, we compare two scenarios: an 'optimal day' approach that iteratively selects the most informative days for AADT estimation and a 'no optimal day' baseline reflecting current practice by most DOTs. To align with Texas DOT's traffic monitoring program, continuous count data were utilized to simulate the 24 hour short counts. The actual field short counts were used to enhance feature engineering through using a leave-one-out (LOO) technique to generate unbiased representative daily traffic features across similar road segments. Our proposed methodology outperforms the baseline across the top five days, with the best day (Day 186) achieving lower errors (RMSE: 7,871.15, MAE: 3,645.09, MAPE: 11.95%) and higher R^2 (0.9756) than the baseline (RMSE: 11,185.00, MAE: 5,118.57, MAPE: 14.42%, R^2: 0.9499). This research offers DOTs an alternative to conventional short-duration count practices, improving AADT estimation, supporting Highway Performance Monitoring System compliance, and reducing the operational costs of statewide traffic data collection.

cs.LG↗

arXiv2025

Mode Choice Heterogeneity Among Zero-Vehicle Households: A Latent Class Cluster Approach

In transportation planning, Zero-Vehicle Households (ZVHs) are often treated as a uniform group with limited mobility options and assumed to rely heavily on walking or public transit. However, such assumptions overlook the diverse travel strategies ZVHs employ in response to varying trip needs and sociodemographic factors. This study addresses this gap by applying a weighted Latent Class Cluster Analysis (LCCA) to data from the 2022 National Household Travel Survey (NHTS) to uncover distinct mobility patterns within the ZVH population. Using travel mode and trip purpose as indicators and demographic, economic, and built environment variables as covariates, we identified three latent classes :Shared mobility errand workers (36.3%), who primarily use transit and ridehailing for commuting and essential activities; car based shoppers (29.9%), who depend on informal vehicle access for longer discretionary trips and active travel Shoppers (33.8%), who rely on walking or cycling for short, local shopping oriented travel. These behavioral findings enable policymakers to develop differentiated planning solutions to the specific needs of each segment among the ZVHs population across varied geographic and demographic settings.

stat.AP↗

arXiv2025

Harnessing ADAS for Pedestrian Safety: A Data-Driven Exploration of Fatality Reduction

Pedestrian fatalities continue to rise in the United States, driven by factors such as human distraction, increased vehicle size, and complex traffic environments. Advanced Driver Assistance Systems (ADAS) offer a promising avenue for improving pedestrian safety by enhancing driver awareness and vehicle responsiveness. This study conducts a comprehensive data-driven analysis utilizing the Fatality Analysis Reporting System (FARS) to quantify the effectiveness of specific ADAS features like Pedestrian Automatic Emergency Braking (PAEB), Forward Collision Warning (FCW), and Lane Departure Warning (LDW), in lowering pedestrian fatalities. By linking vehicle specifications with crash data, we assess how ADAS performance varies under different environmental and behavioral conditions, such as lighting, weather, and driver/pedestrian distraction. Results indicate that while ADAS can reduce crash severity and prevent some fatalities, its effectiveness is diminished in low-light and adverse weather. The findings highlight the need for enhanced sensor technologies and improved driver education. This research informs policymakers, transportation planners, and automotive manufacturers on optimizing ADAS deployment to improve pedestrian safety and reduce traffic-related deaths.

cs.CY↗

arXiv2025

Real-Time Conflict Prediction for Large Truck Merging in Mixed Traffic at Work Zone Lane Closures

Large trucks substantially contribute to work zone-related crashes, primarily due to their large size and blind spots. When approaching a work zone, large trucks often need to merge into an adjacent lane because of lane closures caused by construction activities. This study aims to enhance the safety of large truck merging maneuvers in work zones by evaluating the risk associated with merging conflicts and establishing a decision-making strategy for merging based on this risk assessment. To predict the risk of large trucks merging into a mixed traffic stream within a work zone, a Long Short-Term Memory (LSTM) neural network is employed. For a large truck intending to merge, it is critical that the immediate downstream vehicle in the target lane maintains a minimum safe gap to facilitate a safe merging process. Once a conflict-free merging opportunity is predicted, large trucks are instructed to merge in response to the lane closure. Our LSTM-based conflict prediction method is compared against baseline approaches, which include probabilistic risk-based merging, 50th percentile gap-based merging, and 85th percentile gap-based merging strategies. The results demonstrate that our method yields a lower conflict risk, as indicated by reduced Time Exposed Time-to-Collision (TET) and Time Integrated Time-to-Collision (TIT) values relative to the baseline models. Furthermore, the findings indicate that large trucks that use our method can perform early merging while still in motion, as opposed to coming to a complete stop at the end of the current lane prior to closure, which is commonly observed with the baseline approaches.

cs.LG↗

arXiv2025

Crash Severity Risk Modeling Strategies under Data Imbalance

This study investigates crash severity risk modeling strategies for work zones involving large vehicles (i.e., trucks, buses, and vans) under crash data imbalance between low-severity (LS) and high-severity (HS) crashes. We utilized crash data involving large vehicles in South Carolina work zones from 2014 to 2018, which included four times more LS crashes than HS crashes. The objective of this study is to evaluate the crash severity prediction performance of various statistical, machine learning, and deep learning models under different feature selection and data balancing techniques. Findings highlight a disparity in LS and HS predictions, with lower accuracy for HS crashes due to class imbalance and feature overlap. Discriminative Mutual Information (DMI) yields the most effective feature set for predicting HS crashes without requiring data balancing, particularly when paired with gradient boosting models and deep neural networks such as CatBoost, NeuralNetTorch, XGBoost, and LightGBM. Data balancing techniques such as NearMiss-1 maximize HS recall when combined with DMI-selected features and certain models such as LightGBM, making them well-suited for HS crash prediction. Conversely, RandomUnderSampler, HS Class Weighting, and RandomOverSampler achieve more balanced performance, which is defined as an equitable trade-off between LS and HS metrics, especially when applied to NeuralNetTorch, NeuralNetFastAI, CatBoost, LightGBM, and Bayesian Mixed Logit (BML) using merged feature sets or models without feature selection. The insights from this study offer safety analysts guidance on selecting models, feature selection, and data balancing techniques aligned with specific safety goals, providing a robust foundation for enhancing work-zone crash severity prediction.

cs.LG↗

arXiv2025

Quantum Computing Supported Adversarial Attack-Resilient Autonomous Vehicle Perception Module for Traffic Sign Classification

Deep learning (DL)-based image classification models are essential for autonomous vehicle (AV) perception modules since incorrect categorization might have severe repercussions. Adversarial attacks are widely studied cyberattacks that can lead DL models to predict inaccurate output, such as incorrectly classified traffic signs by the perception module of an autonomous vehicle. In this study, we create and compare hybrid classical-quantum deep learning (HCQ-DL) models with classical deep learning (C-DL) models to demonstrate robustness against adversarial attacks for perception modules. Before feeding them into the quantum system, we used transfer learning models, alexnet and vgg-16, as feature extractors. We tested over 1000 quantum circuits in our HCQ-DL models for projected gradient descent (PGD), fast gradient sign attack (FGSA), and gradient attack (GA), which are three well-known untargeted adversarial approaches. We evaluated the performance of all models during adversarial attacks and no-attack scenarios. Our HCQ-DL models maintain accuracy above 95\% during a no-attack scenario and above 91\% for GA and FGSA attacks, which is higher than C-DL models. During the PGD attack, our alexnet-based HCQ-DL model maintained an accuracy of 85\% compared to C-DL models that achieved accuracies below 21\%. Our results highlight that the HCQ-DL models provide improved accuracy for traffic sign classification under adversarial settings compared to their classical counterparts.

cs.LG↗

arXiv2025

Unraveling Pedestrian Fatality Patterns: A Comparative Study with Explainable AI

Road fatalities pose significant public safety and health challenges worldwide, with pedestrians being particularly vulnerable in vehicle-pedestrian crashes due to disparities in physical and performance characteristics. This study employs explainable artificial intelligence (XAI) to identify key factors contributing to pedestrian fatalities across the five U.S. states with the highest crash rates (2018-2022). It compares them to the five states with the lowest fatality rates. Using data from the Fatality Analysis Reporting System (FARS), the study applies machine learning techniques-including Decision Trees, Gradient Boosting Trees, Random Forests, and XGBoost-to predict contributing factors to pedestrian fatalities. To address data imbalance, the Synthetic Minority Over-sampling Technique (SMOTE) is utilized, while SHapley Additive Explanations (SHAP) values enhance model interpretability. The results indicate that age, alcohol and drug use, location, and environmental conditions are significant predictors of pedestrian fatalities. The XGBoost model outperformed others, achieving a balanced accuracy of 98 %, accuracy of 90 %, precision of 92 %, recall of 90 %, and an F1 score of 91 %. Findings reveal that pedestrian fatalities are more common in mid-block locations and areas with poor visibility, with older adults and substance-impaired individuals at higher risk. These insights can inform policymakers and urban planners in implementing targeted safety measures, such as improved lighting, enhanced pedestrian infrastructure, and stricter traffic law enforcement, to reduce fatalities and improve public safety.

cs.LG↗

arXiv2025

Analyzing Factors Influencing Driver Willingness to Accept Advanced Driver Assistance Systems

Advanced Driver Assistance Systems (ADAS) enhance highway safety by improving environmental perception and reducing human errors. However, misconceptions, trust issues, and knowledge gaps hinder widespread adoption. This study examines driver perceptions, knowledge sources, and usage patterns of ADAS in passenger vehicles. A nationwide survey collected data from a diverse sample of U.S. drivers. Machine learning models predicted ADAS adoption, with SHAP (SHapley Additive Explanations) identifying key influencing factors. Findings indicate that higher trust levels correlate with increased ADAS usage, while concerns about reliability remain a barrier. Specific features, such as Forward Collision Warning and Driver Monitoring Systems, significantly influence adoption likelihood. Demographic factors (age, gender) and driving habits (experience, frequency) also shape ADAS acceptance. Findings emphasize the influence of socioeconomic, demographic, and behavioral factors on ADAS adoption, offering guidance for automakers, policymakers, and safety advocates to improve awareness, trust, and usability.

cs.LG↗

arXiv2025

Analysis of Distracted Pedestrians Crossing Behavior: An Immersive Virtual Reality Application

Pedestrian safety is a critical public health priority, with pedestrian fatalities accounting for 18% of all U.S. traffic deaths in 2022. The rising prevalence of distracted walking, exacerbated by mobile device use, poses significant risks at signalized intersections. This study utilized an immersive virtual reality (VR) environment to simulate real-world traffic scenarios and assess pedestrian behavior under three conditions: undistracted crossing, crossing while using a mobile device, and crossing with Light-emitting diode (LED) safety interventions. Analysis using ANOVA models identified speed and mobile-focused eye-tracking as significant predictors of crossing duration, revealing how distractions impair situational awareness and response times. While LED measures reduced delays, their limited effectiveness highlights the need for integrated strategies addressing both behavioral and physical factors. This study showcases VRs potential to analyze complex pedestrian behaviors, offering actionable insights for urban planners and policymakers aiming to enhance pedestrian safety.

cs.HC↗

arXiv2024

An AutoML-based approach for Network Intrusion Detection

In this paper, we present an automated machine learning (AutoML) approach for network intrusion detection, leveraging a stacked ensemble model developed using the MLJAR AutoML framework. Our methodology combines multiple machine learning algorithms, including LightGBM, CatBoost, and XGBoost, to enhance detection accuracy and robustness. By automating model selection, feature engineering, and hyperparameter tuning, our approach reduces the manual overhead typically associated with traditional machine learning methods. Extensive experimentation on the NSL-KDD dataset demonstrates that the stacked ensemble model outperforms individual models, achieving high accuracy and minimizing false positives. Our findings underscore the benefits of using AutoML for network intrusion detection, as the AutoML-driven stacked ensemble achieved the highest performance with 90\% accuracy and an 89\% F1 score, outperforming individual models like Random Forest (78\% accuracy, 78\% F1 score), XGBoost and CatBoost (both 80\% accuracy, 80\% F1 score), and LightGBM (78\% accuracy, 78\% F1 score), providing a more adaptable and efficient solution for network security applications.

cs.LG↗

arXiv2021

Hybrid Classical-Quantum Deep Learning Models for Autonomous Vehicle Traffic Image Classification Under Adversarial Attack

Image classification must work for autonomous vehicles (AV) operating on public roads, and actions performed based on image misclassification can have serious consequences. Traffic sign images can be misclassified by an adversarial attack on machine learning models used by AVs for traffic sign recognition. To make classification models resilient against adversarial attacks, we used a hybrid deep-learning model with both the quantum and classical layers. Our goal is to study the hybrid deep-learning architecture for classical-quantum transfer learning models to support the current era of intermediate-scale quantum technology. We have evaluated the impacts of various white box adversarial attacks on these hybrid models. The classical part of hybrid models includes a convolution network from the pre-trained Resnet18 model, which extracts informative features from a high dimensional LISA traffic sign image dataset. The output from the classical processor is processed further through the quantum layer, which is composed of various quantum gates and provides support to various quantum mechanical features like entanglement and superposition. We have tested multiple combinations of quantum circuits to provide better classification accuracy with decreasing training data and found better resiliency for our hybrid classical-quantum deep learning model during attacks compared to the classical-only machine learning models.

quant-ph↗

arXiv2021

Hybrid Quantum-Classical Neural Network for Incident Detection

The efficiency and reliability of real-time incident detection models directly impact the affected corridors' traffic safety and operational conditions. The recent emergence of cloud-based quantum computing infrastructure and innovations in noisy intermediate-scale quantum devices have revealed a new era of quantum-enhanced algorithms that can be leveraged to improve real-time incident detection accuracy. In this research, a hybrid machine learning model, which includes classical and quantum machine learning (ML) models, is developed to identify incidents using the connected vehicle (CV) data. The incident detection performance of the hybrid model is evaluated against baseline classical ML models. The framework is evaluated using data from a microsimulation tool for different incident scenarios. The results indicate that a hybrid neural network containing a 4-qubit quantum layer outperforms all other baseline models when there is a lack of training data. We have created three datasets; DS-1 with sufficient training data, and DS-2 and DS-3 with insufficient training data. The hybrid model achieves a recall of 98.9%, 98.3%, and 96.6% for DS-1, DS-2, and DS-3, respectively. For DS-2 and DS-3, the average improvement in F2-score (measures model's performance to correctly identify incidents) achieved by the hybrid model is 1.9% and 7.8%, respectively, compared to the classical models. It shows that with insufficient data, which may be common for CVs, the hybrid ML model will perform better than the classical models. With the continuing improvements of quantum computing infrastructure, the quantum ML models could be a promising alternative for CV-related applications when the available data is insufficient.

cs.LG↗