arXiv subjects

Juan José Esteban Delgado

Publications and source records attributed to Juan José Esteban Delgado.

8 recordsLinked to original sources

arXiv2026

Nested active pointing control for interspacecraft laser interferometry

Precise pointing control is critical for interspacecraft laser interferometry, as angular misalignment introduces measurement noise and can even lead to laser link loss. We present a nested control architecture that uses differential wavefront sensing signals to drive a fast steering mirror (FSM) to track the incoming beam, while feeding the FSM deflections back to the attitude and orbit control system to suppress angle-dependent optical path variations. This scheme is experimentally validated in our hexapod-based setup. Relative to standalone FSM actuation, the nested configuration reduced the low-frequency root-mean-square pointing jitter by approximately a factor of 2 over 3--70 mHz in both directions. Additionally, tilt-to-length coupling was suppressed by an order of magnitude below 5 mHz and by two orders of magnitude below 0.5 mHz. These results demonstrate the feasibility of nested active pointing control for future interspacecraft laser interferometry missions.

physics.optics↗

arXiv2026

Beam angle-locked loop in laser interferometry

Maintaining precise beam coalignment is essential in laser interferometry, particularly for interspacecraft missions where angular misalignments introduce tilt-to-length coupling noise and risk complete link failure. This work presents a comprehensive theoretical and experimental framework for the beam angle-locked loop, which maintains coalignment between two interfering beams. Minute angular misalignments are detected via differential wavefront-sensing signals, which are used as the error signal for feedback control. A detailed linear control model incorporating an angle detector, a digital filter, a proportional-integral-double-integral servo, a digital-to-analog converter, and a beam-steering mechanism is developed. Using loop transfer functions, we establish a noise-propagation model that quantifies the contributions of individual components to both out-of-loop and in-loop angle errors. The analytical results are experimentally validated using a transponder-based interferometric link spanning two optical benches, with a hexapod simulating spacecraft attitude jitter. The measured transfer functions and coalignment performance agree well with theoretical predictions, yielding a pointing stability better than 10 urad$/\sqrt{\text{Hz}}$ between 0.2 mHz and 1 Hz. Furthermore, a loop-optimization strategy is demonstrated to minimize angle misalignment within a target frequency band by tuning the servo gain, without requiring hardware modifications. This validated framework provides a reliable architecture for designing and optimizing active beam alignment in laser interferometry.

physics.optics↗

arXiv2026

Experimental Demonstration of an On-Axis Laser Ranging Interferometer for Future Gravity Missions

We experimentally demonstrate a novel interferometric architecture for next-generation gravity missions, featuring a laser ranging interferometer (LRI) that enables monoaxial transmission and reception of laser beams between two optical benches with a heterodyne frequency of 7.3 MHz. Active beam steering loops, utilizing differential wavefront sensing (DWS) signals, ensure co-alignment between the receiving (RX) beam and the transmitting (TX) beam. With spacecraft attitude jitter simulated by hexapod-driven rotations, the interferometric link achieves a pointing stability below 10 urad/$\mathrm{\sqrt{Hz}}$ in the frequency range between 0.2 mHz and 0.5 Hz, and the fluctuation of the TX beam's polarization state results in a reduction of 0.14\% in the carrier-to-noise-density ratio over a 15-hour continuous measurement. Additionally, tilt-to-length (TTL) coupling is experimentally investigated using the periodic scanning of the hexapod. Experimental results show that the on-axis LRI enables the inter-spacecraft ranging measurements with nanometer accuracy, making it a potential candidate for future GRACE-like missions.

physics.optics↗

arXiv2024

Experimental end-to-end demonstration of intersatellite absolute ranging for LISA

The Laser Interferometer Space Antenna (LISA) is a gravitational wave detector in space. It relies on a post-processing technique named time-delay interferometry (TDI) to suppress the overwhelming laser frequency noise by several orders of magnitude. This algorithm requires intersatellite-ranging monitors to provide information on spacecraft separations. To fulfill this requirement, we will use on-ground observatories, optical sideband-sideband beatnotes, pseudo-random noise ranging (PRNR), and time-delay interferometric ranging (TDIR). This article reports on the experimental end-to-end demonstration of a hexagonal optical testbed used to extract absolute ranges via the optical sidebands, PRNR, and TDIR. These were applied for clock synchronization of optical beatnote signals sampled at independent phasemeters. We set up two possible PRNR processing schemes: Scheme 1 extracts pseudoranges from PRNR via a calibration relying on TDIR; Scheme 2 synchronizes all beatnote signals without TDIR calibration. The schemes rely on newly implemented monitors of local PRNR biases. After the necessary PRNR treatments (unwrapping, ambiguity resolution, bias correction, in-band jitter reduction, and/or calibration), Scheme 1 and 2 achieved ranging accuracies of 2.0 cm to 8.1 cm and 5.8 cm to 41.1 cm, respectively, below the classical 1 m mark with margins.

astro-ph.IM↗

arXiv2023

Single-Element Dual-Interferometer for Precision Inertial Sensing: Sub-picometer Structural Stability and Performance as a Reference for Laser Frequency Stabilization

To reach sub-picometer sensitivity in the millihertz range, displacement sensors based on laser interferometry require suppression of laser-frequency noise by several orders of magnitude. Many optical frequency stabilization methods exist with varying levels of complexity, size, and performance. In this paper, we describe the performance of a compact Mach-Zehnder interferometer based on a monolithic optic. The setup consists of a commercial fiber injector, a custom-designed pentaprism used to split and recombine the laser beam, and two photoreceivers placed at the complementary output ports of the interferometer. The structural stability of the prism is transferred to the laser frequency via amplification, integration, and feedback of the balanced-detection signal, achieving a fractional frequency instability better than 6 parts in $10^{13}$, corresponding to an interferometer pathlength stability better than $10^{-12}$ m$/\sqrt{\mathrm{Hz}}$.

physics.optics↗

arXiv2023

$2\cdot 10^{-13}$ fractional laser frequency stability with a 7-cm unequal-arm Mach-Zehnder interferometer

To achieve sub-picometer sensitivities in the millihertz band, laser interferometric inertial sensors rely on some form of reduction of the laser frequency noise, typically by locking the laser to a stable frequency reference, such as the narrow-linewidth resonance of an ultra-stable optical cavity or an atomic or molecular transition. In this paper we report on a compact laser frequency stabilization technique based on an unequal-arm Mach-Zehnder interferometer that is sub-nanometer stable at $10\,μ$Hz, sub-picometer at $0.5\,$mHz, and reaches a noise floor of $7\,\mathrm{fm}/\!\sqrt{\mathrm{Hz}}$ at 1 Hz. The interferometer is used in conjunction with a DC servo to stabilize the frequency of a laser down to a fractional instability below $4 \times 10^{-13}$ at averaging times from 0.1 to 100 seconds. The technique offers a wide operating range, does not rely on complex lock acquisition procedures, and can be readily integrated as part of the optical bench in future gravity missions.

physics.optics↗

arXiv2020

Tracking length and differential wavefront sensing signals from quadrant photodiodes in heterodyne interferometers with digital phase-locked loop readout

We propose a method to track signals from quadrant photodiodes (QPD) in heterodyne laser interferometers that employ digital phase-locked loops for phase readout. Instead of separately tracking the four segments from the QPD and then combining the results into length and Differential Wavefront Sensing (DWS) signals, this method employs a set of coupled tracking loops that operate directly on the combined length and angular signals. Benefits are increased signal-to-noise ratio in the loops and the possibility to adapt the loop bandwidths to the different dynamical behavior of the signals being tracked, which now correspond to physically meaningful observables. We demonstrate an improvement of up to 6 dB over single-segment tracking, which makes this scheme an attractive solution for applications in precision inter-satellite laser interferometry in ultra-low-light conditions.

physics.ins-det↗

arXiv2015

Readout for intersatellite laser interferometry: Measuring low frequency phase fluctuations of HF signals with microradian precision

Precision phase readout of optical beat note signals is one of the core techniques required for intersatellite laser interferometry. Future space based gravitational wave detectors like eLISA require such a readout over a wide range of MHz frequencies, due to orbit induced Doppler shifts, with a precision in the order of $μ\textrm{rad}/\sqrt{\textrm{Hz}}$ at frequencies between $0.1\,\textrm{mHz}$ and $1\,\textrm{Hz}$. In this paper, we present phase readout systems, so-called phasemeters, that are able to achieve such precisions and we discuss various means that have been employed to reduce noise in the analogue circuit domain and during digitisation. We also discuss the influence of some non-linear noise sources in the analogue domain of such phasemeters. And finally, we present the performance that was achieved during testing of the elegant breadboard model of the LISA phasemeter, that was developed in the scope of an ESA technology development activity.

physics.ins-det↗