arXiv subjects

Joshua Taylor

Publications and source records attributed to Joshua Taylor.

5 recordsLinked to original sources

arXiv2026

A Tilt-Rotor UAV with a Gripper for Stable Contact-Based Tasks via Environmental Anchoring

Maintaining a stable pose during physical interaction is a significant challenge for aerial robots, often limiting their use in contact-based tasks. This paper presents a novel uncrewed aerial vehicle (UAV) platform designed to transition from unconstrained flight to a stable, constrained work platform via environmental anchoring. Our system comprises: 1) a multirotor with a tilt-rotor mechanism that decouples pitch from forward motion, enabling stable hover at non-zero pitch angles, and 2) a novel underactuated, cable-driven, prismatic gripper featuring compliance to adapt to irregular geometries, designed to stabilize the UAV by anchoring it to its environment. We present the design and prototyping of the complete system and validate its performance through a series of real-robot flight tests. Results demonstrate that anchoring significantly improves stability for interaction tasks, reducing positional drift RMSE by over 95% compared to a free-flight baseline, even under windy conditions. The anchored system can withstand longitudinal reaction forces up to 75N while maintaining a stable pose. Furthermore, across a range of target geometries and orientations, the system demonstrated consistent stability with a positional drift RMSE that never exceeded 3mm. These results establish the viability of our approach for complex physical interaction tasks, such as sampling tree health by drilling or sensor installation in hard-to-reach locations. Watch our UAV at: https://youtu.be/HDQ8S4ZW3Ls

cs.RO↗

arXiv2025

Convex Pollution Control of Wastewater Treatment Systems

We design a model-predictive controller for managing the actuators in sewer networks. It minimizes flooding and combined-sewer overflow during rain and pollution at other times. To make the problem tractable, we use a convex relaxation of the microbial growth kinetics and a physically motivated linearization of the mass flow bilinearities. With these approximations, the trajectory optimization in each control period is a second-order cone program. In simulation, the controller releases roughly 15% less pollutant mass than a conventional controller while treating nearly the same volume of flow. It does so by better balancing the flow over the treatment plants and over time.

math.OC↗

arXiv2023

Quantifying the dust in SN 2012aw and iPTF14hls with ORBYTS

Core-collapse supernovae (CCSNe) are potentially capable of producing large quantities of dust, with strong evidence that ejecta dust masses can grow significantly over extended periods of time. Red-blue asymmetries in the broad emission lines of CCSNe can be modelled using the Monte Carlo radiative transfer code DAMOCLES, to determine ejecta dust masses. To facilitate easier use of DAMOCLES, we present a Tkinter graphical user interface (GUI) running DAMOCLES. The GUI was tested by high school students as part of the Original Research By Young Twinkle Students (ORBYTS) programme, who used it to measure the dust masses formed at two epochs in two Type IIP CCSNe: SN 2012aw and iPTF14hls, demonstrating that a wide range of people can contribute significantly to scientific advancement. Bayesian methods were used to quantify uncertainties on our model parameters. From the presence of a red scattering wing in the day 1863 H$α$ profile of SN 2012aw, we were able to constrain the dust composition to large (radius $>0.1 μ$m) silicate grains, with a dust mass of $6.0^{+21.9}_{-3.6}\times10^{-4} M_\odot$. From the day 1158 H$α$ profile of SN 2012aw, we found a dust mass of $3.0^{+14}_{-2.5}\times10^{-4}$ M$_\odot$. For iPTF14hls, we found a day 1170 dust mass of 8.1 $^{+81}_{-7.6}\times10^{-5}$ M$_{\odot}$ for a dust composition consisting of 50% amorphous carbon and 50% astronomical silicate. At 1000 days post explosion, SN 2012aw and iPTF14hls have formed less dust than SN 1987A, suggesting that SN 1987A could form larger dust masses than other Type IIP's.

astro-ph.SR↗

arXiv2020

Effectiveness of SCADA System Security Used Within Critical Infrastructure

Since the 1960s Supervisory Control and Data Acquisition (SCADA) systems have been used within industry. Referred to as critical infrastructure (CI), key installations such as power stations, water treatment and energy grids are controlled using SCADA. Existing literature reveals inherent security risks to CI and suggests this stems from the rise of interconnected networks, leading to the hypothesis that the rise of interconnectivity between corporate networks and SCADA system networks pose security risks to CI. The results from studies into previous global attacks involving SCADA and CI, with focus on two highly serious incidents in Iran and Ukraine, reveal that although interconnectivity is a major factor, isolated CIs are still highly vulnerable to attack due to risks within the SCADA controllers and protocols.

cs.CR↗

arXiv2004

P=NP

We claim to resolve the P=?NP problem via a formal argument for P=NP.

cs.CC↗