arXiv subjects

Jorge Gil-Rostra

Publications and source records attributed to Jorge Gil-Rostra.

8 recordsLinked to original sources

arXiv2026

Polarization-Multiplexed Bloch Surface Wave Sensing of Single-Strand DNA Growth

Refractometric biosensing is a vital label-free tool for the real time detection and interaction analysis of biological and chemical substances. Nanophotonic platforms like Surface Plasmon Resonance (SPR) have played a critical role in providing refractometric sensing capabilities for clinical diagnostics and environmental monitoring. However, traditional systems operating in a single-polarization state cannot fully characterize complex optical properties such as birefringence, which is crucial to resolve many complex biological interactions. Although Bloch Surface Wave (BSW) sensors can support both TE and TM modes, a key capability SPR lacks, they have historically been implemented in single-mode configurations. In this paper, we present a polarization multiplexed BSW refractometric sensing system, simultaneously tracking the resonant wavelength shifts of both TE and TM BSW modes through time. Our technique was applied to investigate single-strand DNA growth during rolling circle amplification (RCA). To accurately recover the time-dependent birefringence, capturing dynamics of the DNA growth and orientation of its chains, we implemented a two-stage modeling approach based on the TMM. First, we utilized a wavelength-dependent surface sensitivity model, confining refractive index changes to the immediate layer above the crystal, to distinguish isotropic background dynamics from birefringent signals. Following the onset of RCA, we transitioned to a model that accounted for the vertical growth of the DNA layers in time. By fitting this model to the TE and TM resonant shifts, we monitor the growth rate of the single-strand DNA layer as well as the refractive index along the two polarization components. Our findings demonstrate the platform's ability to resolve the structural evolution of complex bimolecular interactions associated with conformational changes.

physics.optics↗

arXiv2024

Mechanisms of de-icing by surface Rayleigh and plate Lamb acoustic waves

Acoustic waves (AW) have recently emerged as an energy-efficient ice removal procedure compatible with functional and industrial-relevant substrates. However, critical aspects at fundamental and experimental levels have yet to be disclosed to optimize their operational conditions. Identifying the processes and mechanisms by which different types of AWs induce de-icing are some of these issues. Herein, using model LiNbO3 systems and two types of interdigitated transducers, we analyze the de-icing and anti-icing efficiencies and mechanisms driven by Rayleigh surface acoustic waves (R-SAW) and Lamb waves with 120 and 510 um wavelengths, respectively. Through the experimental analysis of de-icing and active anti-icing processes and the finite element simulation of the AW generation, propagation, and interaction with small ice aggregates, we disclose that Lamb waves are more favorable than R-SAWs to induce de-icing and/or prevent the freezing of droplets. Prospects for applications of this study are supported by proof of concept experiments, including de-icing in an ice wind tunnel, demonstrating that Lamb waves can efficiently remove ice layers covering large LN substrates. Results indicate that the de-icing mechanism may differ for Lamb waves or R-SAWs and that the wavelength must be considered as an important parameter for controlling the efficiency.

cond-mat.mtrl-sci↗

arXiv2024

Tailoring the Nucleation and Growth of Silver Nanoparticles by Sputtering Deposition under Acoustic Wave Activation. Assessment of Plasma Conditions and 2D Patterning Phenomena

Early results on the plasma deposition of dielectric thin films on acoustic wave (AW) activated substrates revealed a densification pattern arisen from the focusing of plasma ions and their impact on specific areas of the piezoelectric substrate. Herein, we extend this methodology to tailor the plasma deposition of metals onto AW-activated LiNbO3 piezoelectric substrates. Our investigation reveals the tracking of the initial stages of nanoparticle (NP) formation and growth during the submonolayer deposition of silver. We elucidate the specific role of AW activation in reducing particle size, enhancing particle circularity, and retarding NP agglomeration and account for the physical phenomena making these processes differ from those occurring on non-activated substrates. We provide a comparative analysis of the results obtained under two representative plasma conditions: diode DC sputtering and magnetron sputtering. In the latter case, the AW activation gives rise to a 2D pattern of domains with different amounts of silver and a distinct size and circularity for the silver NPs. This difference was attributed to the specific characteristics of the plasma sheath formed onto the substrate in each case. The possibilities of tuning the plasmon resonance absorption of silver NPs by AW activation of the sputtering deposition process are discussed.

physics.app-ph↗

arXiv2023

Multidimensional nanoarchitectures for improved indoor light harvesting in dye-sensitized solar cells

Dye Sensitized Solar Cells (DSSCs) have recently regained attention for indoor light harvesting and powering wireless devices. Advantages such as cost-effectiveness, flexibility, wide angular response, and lightweight design have driven the fostering of the implementation of advanced photonic architectures, dedicated photosensitizers and compatibility with wearable carriers. However, to fully exploit their potential, crucial aspects require further attention, in particular the improvement of spectral compatibility and low-light harvesting mechanisms, as well as the development of efficient photoanodes through high-yield scalable methods. In this article, we propose the use of nanocomposite photoanodes integrating mesoporous TiO2 (m-TiO2) nanoparticles, ITO nanotubes (NTs) and TiO2 anatase shells (ITO@TiO2 NTs) prepared by step-by-step method relying on mild temperature conditions and avoiding toxic precursors. These photoanodes outperform previous attempts to implement low-dimensional ITO and ITO@TiO2 nanowires and nanotubes for outdoor light conversion, demonstrating an outstanding PCE under low artificial light intensity of 24 % for at 0.014 mWcm-2, a 166 % increase compared to the conventional architectures. Advanced microstructural, optical, and electrochemical characterizations have revealed that the strong scattering effect of the light in the visible range coupled with enhanced charge collection at low-intensity illumination are the essential mechanisms responsible for such enhanced energy conversion. Remarkably, our devices retain up to 90% of the normal incidence efficiency even under glancing illumination, while conventional reference devices show a drop down to 50%.

physics.app-ph↗

arXiv2022

Photoelectrochemical water splitting with ITO/WO3/BiVO4/CoPi multishell nanotubes fabricated by soft-templating in vacuum

A well-established procedure for the photoelectrochemical (PEC) splitting of water relies on using porous electrodes of WO3 sensitized with BiVO4 as a visible scavenger photoanode semiconductor. In this work, we propose an evolved photoelectrode fabricated by a soft-template approach consisting of supported multishell nanotubes (NTs). These NTs are formed by a concentric layered structure of indium tin oxide (ITO), WO3, and BiVO4, together with a final film of cobalt phosphate (CoPi) co-catalyst. Photoelectrode manufacturing is easily implemented at large scale and combines thermal evaporation of single crystalline organic nanowires (ONWs), magnetron sputtering (for ITO and WO3), solution dripping, and electrochemical deposition processes (for BiVO4 and CoPi, respectively) plus annealing under mild conditions. The obtained NT electrodes depict a large electrochemically active surface and outperform by more than one order of magnitude the efficiency of equivalent planar-layered electrodes. A thorough electrochemical analysis of the electrodes under blue and solar light illumination demonstrates the critical role of the WO3/BiVO4 Schottky barrier heterojunction in the control of the NT electrode efficiency and its dependence on the BiVO4 outer layer thickness. Oxygen evolution reaction (OER) performance was maximized with the CoPi electrocatalyst, rendering high photocurrents under one sun illumination. The reported results demonstrate the potential of the soft-template methodology for the large area fabrication of highly efficient multishell ITO/WO3/BiVO4/CoPi NT electrodes, or other alternative combinations, for the photoelectrochemical splitting of water.

physics.chem-ph↗

arXiv2022

Surface Acoustic Waves Equip Materials with Active Deicing Functionality: Unraveled Deicing Mechanisms and Application to Centimeter Scale Transparent Surfaces

Migrating active deicing capabilities to transparent materials with low thermal conductivity has a high potential to improve the operations of several seminal industries in the automotive, robotic, energy, and aerospace sectors. However, the development of efficient and environmentally friendly deicing methods is yet in its infancy regarding their compatibility with end-user surfaces at relevant scales and real-world operations. Herein, we approach deicing through nanoscale surface activation enabled by surface acoustic waves (SAWs), allowing efficient on-demand deicing of surface areas spanning several square centimeters covered with thick layers of glace ice. We contemplate SAW-based deicing from a twofold perspective: First, we demonstrate its functionality both with a bulk piezoelectric material (LiNbO3) and a piezo-electric film (ZnO), the latter proving its versatile applicability to a large variety of functional materials with practical importance; second, we gain fundamental knowledge of the mechanisms responsible for efficient deicing using SAWs. In particular, we show that SAW vibrational modes easily transport energy over greater distances outside the electrode areas and efficiently melt large ice aggregates covering the materials' surfaces. In addition, the essential physics of SAW-based deicing is inferred from a carefully designed experimental and numerical study. We support our findings by providing macroscopic camera snapshots captured in situ inside a climate chamber during deicing and highly resolved laser-doppler vibrometer scans of the undisturbed wavefields at room temperature. Great care was taken to deposit the interdigital transducers (IDTs) used for SAW excitation only on ice-free areas close to the chip edges, leaving most of the substrate used for deicing unaltered and, as a matter of fact, demonstrating transparent deicing solutions.

physics.app-ph↗

arXiv2022

A holistic solution to icing by acoustic waves: de-icing, active anti-icing, sensing with piezoelectric crystals, and synergy with thin film passive anti-icing solutions

Icing has become a hot topic both in academia and in the industry given its implications in strategic sectors such as transport, robotics, wind turbines, photovoltaics, and electricity supply. Recently proposed de-icing solutions involving the propagation of acoustic waves (AWs) at suitable substrates may open the path for a sustainable alternative to standard de-icing or anti-icing protocols. Herein we experimentally unravel some of the basic interactions that contribute to the de-icing and/or hinder the icing (ice accretion) on AW-activated substrates. The response toward icing of a model substrate system consisting of a piezoelectric LiNbO3 plate AW activated by radio-frequency (rf) signaling to planar electrodes has been characterized both at a laboratory scale and in an icing wind tunnel under forced convection conditions. Main features related to de-icing mechanisms, a decrease of ice adhesion, or the avoidance of ice accretion have been disclosed by this holistic investigation. Furthermore, additional experiments have shown that the piezoelectric substrate surfaces modified with a fluorinated ZnO thin film or a ZnO/CFx bilayer present anti-icing functionality and a synergistic response when activated with AWs. A careful analysis of the dependence of resonance frequency of the piezoelectric substrates on experimental variables such as temperature, ice formation, or wind velocity shows that this parameter can be used as an internal control procedure for real-time monitoring of icing processes onto AW-activated devices

cond-mat.mtrl-sci↗

arXiv2021

One-reactor vacuum and plasma synthesis of transparent conducting oxide nanotubes and nanotrees: from single wire conductivity to ultra-broadband perfect absorbers in the NIR

The eventual exploitation of one-dimensional nanomaterials yet needs the development of scalable, high yield, homogeneous, and environmentally friendly methods able to meet the requirements for the fabrication of under design functional nanomaterials. In this article, we demonstrate a vacuum and plasma one-reactor approach for the synthesis of the fundamental common element in solar energy and optoelectronics, i.e. the transparent conducting electrode but in the form of nanotubes and nanotrees architectures. Although the process is generic and can be used for a variety of TCOs and wide-bandgap semiconductors, we focus herein on Indium Doped Tin Oxide (ITO) as the most extended in the previous applications. This protocol combines widely applied deposition techniques such as thermal evaporation for the formation of organic nanowires serving as 1D and 3D soft templates, deposition of polycrystalline layers by magnetron sputtering, and removal of the template by simply annealing under mild vacuum conditions. The process variables are tuned to control the stoichiometry, morphology, and alignment of the ITO nanotubes and nanotrees. Four-probe characterization reveals the improved lateral connectivity of the ITO nanotrees and applied on individual nanotubes shows resistivities as low as 3.5 +/- 0.9 x 10-4 {\Omega}.cm, a value comparable to single-crystalline counterparts. The assessment of diffuse reflectance and transmittance in the UV-VIS range confirms the viability of the supported ITO nanotubes as a random optical media working as strong scattering layers. Further ability to form ITO nanotrees opens the path for practical applications as ultra-broadband absorbers in the NIR. The demonstrated low resistivity and optical properties of these ITO nanostructures open the way for their use in LEDs, IR shield, energy harvesting, nanosensors, and photoelectrochemical applications

physics.app-ph↗