arXiv ScienceSearch

arXiv subjects

Jon Lin

Publications and source records attributed to Jon Lin.

2 recordsLinked to original sources

Spectroscopy using a visible photonic lantern at the Subaru telescope: Laboratory characterization and first on-sky demonstration on Ikiiki ({\alpha} Leo) and `Aua ({\alpha} Ori)

Photonic lanterns are waveguide devices enabling high throughput single mode spectroscopy and high angular resolution. We aim to present the first on-sky demonstration of a photonic lantern (PL) operating in visible light, to measure its throughput and assess its potential for high-resolution spectroscopy of compact objects. We used the SCExAO instrument (a double stage extreme AO system installed at the Subaru telescope) and FIRST mid-resolution spectrograph (R 3000) to test the visible capabilities of the PL on internal source and on-sky observations. The best averaged coupling efficiency over the PL field of view was measured at 51% +/- 10% with a peak at 80%. We also investigate the relationship between coupling efficiency and the Strehl ratio for a PL, comparing them with those of a single-mode fiber (SMF). Findings show that in the AO regime, a PL offers better coupling efficiency performance than a SMF, especially in the presence of low spatial frequency aberrations. We observed Ikiiki (alpha Leo - mR = 1.37) and `Aua (alpha Ori - mR = -1.17) at a frame rate of 200 Hz. Under median seeing conditions (about 1 arcsec measured in H band) and large tip/tilt residuals (over 20 mas), we estimated an average light coupling efficiency of 14.5% +/- 7.4%, with a maximum of 42.8% at 680 nm. We were able to reconstruct both star's spectra, containing various absorption lines. The successful demonstration of this device opens new possibilities in terms of high throughput single-mode fiber-fed spectroscopy in the Visible. The demonstrated on-sky coupling efficiency performance would not have been achievable with a single SMF injection setup under similar conditions, partly because the residual tip/tilt alone exceeded the field of view of a visible SMF (18 mas at 700 nm). Thus emphasizing the enhanced resilience of PL technology to such atmospheric disturbances. The additional

astro-ph.IM

Visible Photonic Lantern integration, characterization and on-sky testing on Subaru/SCExAO

A Photonic Lantern (PL) is a novel device that efficiently converts a multi-mode fiber into several single-mode fibers. When coupled with an extreme adaptive optics (ExAO) system and a spectrograph, PLs enable high throughput spectroscopy at high angular resolution. The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system of the Subaru Telescope recently acquired a PL that converts its multi-mode input into 19 single-mode outputs. The single mode outputs feed a R~4,000 spectrograph optimized for the 600 to 760 nm wavelength range. We present here the integration of the PL on SCExAO, and study the device performance in terms of throughput, field of view, and spectral reconstruction. We also present the first on-sky demonstration of a Visible PL coupled with an ExAO system, showing a significant improvement of x12 in throughput compared to the use of a sole single-mode fiber. This work paves the way towards future high throughput photonics instrumentation at small angular resolution.

astro-ph.IM