arXiv subjects

John Cavin

Publications and source records attributed to John Cavin.

6 recordsLinked to original sources

arXiv2026

First-principles-based Prediction of Phase Fields: Part I. Binary and Ternary Refractory Alloys

Multiple principal element alloys (MPEAs) exhibit complex phase equilibria involving multinary solid solutions and intermetallics, which makes it challenging to predict their temperature-composition phase diagrams. Their vast compositional space makes first principles methods prohibitively expensive, while CALPHAD is limited by scarce experimental data. Here, we present a computationally efficient framework to predict the solvus phase boundaries, and hence, phase fields, in refractory MPEAs composed of Cr, Hf, Mo, Nb, Ta, Ti, V, W, and Zr. The approach combines DFT calculated binary mixing enthalpies with sub regular solution models to construct phase diagrams without fitting higher order interactions, enabling efficient scaling across composition space. Validation against 36 binary and 15 ternary phase diagrams demonstrates good agreement, with both experimental results and CALPHAD calculations. We find that the prediction accuracy is enhanced by incorporating lattice dependent energetics through sub regular solution models and including temperature-dependent elemental phase transitions. The framework captures miscibility gaps, solid solution stability, and intermetallic formation, with predicted miscible temperatures typically within 300 K of experimental values. Overall, this work establishes a scalable, first principles based route for highthroughput prediction of phase diagrams in refractory MPEAs. A publicly accessible web interface has also been developed to allow interactive exploration of the predicted phase diagrams, available at https://raptor.engr.wustl.edu.

cond-mat.mtrl-sci↗

arXiv2025

Unveiling the Shortwave Absorption Spectra of Alumina Aerosols: Implications for Solar Radiation Modification

Alumina is proposed for Stratospheric Aerosol Injection (SAI)-based solar radiation modification due to its presumed ability to scatter sunlight strongly while absorbing weakly. Alumina is assigned negligible solar shortwave absorption in climate models; this assumption is not validated owing to technological challenges in quantifying its weak absorption signals. We report alumina's shortwave imaginary refractive index $k$, a determinant of its absorption strength, using sensitive in situ photoacoustic spectrometry, finding values ranging from $1.4 \times 10^{-4}$ to $1.2 \times 10^{-3}$. Particle-scale electron energy-loss spectroscopy provided independent validation and revealed that the non-ideal absorption arises from oxygen vacancy defects in the alumina's crystal structure. Aerosol chemistry climate model simulations to evaluate shortwave absorption radiative effects revealed insignificant impacts on radiative forcing and stratospheric warming. Our findings indicate that alumina's shortwave absorption, previously reported as a source of uncertainty, is unlikely to affect SAI impact calculations.

physics.ao-ph↗

arXiv2025

SymPlex Plots for Visualizing Properties in High-Dimensional Alloy Spaces

Conventional visualization tools such as phase diagrams and convex hulls are ill-suited to visualize multiple principal element alloys (MPEAs) due to their large compositional space that cannot be easily projected onto two dimensions. Here, SymPlex plots are introduced to enable the visualization of various properties along special paths in high-dimensional phase spaces of MPEAs. These are polar heatmaps that plot properties along high-symmetry paths radiating from the parent equimolar MPEA to a set of chosen lower-order compositions. SymPlex plots capture the changes in the energy landscape along the special paths and help visualize the effect of addition or substitution of components on the alloy stability, which can be especially useful to assess processing pathways for additive manufacturing. Thus, SymPlex plots can help guide design of MPEAs by showing connections between compositions and their properties in the high-dimensional phase space with more information concentrated near the equimolar region.

cond-mat.mtrl-sci↗

arXiv2023

Colossal optical anisotropy from atomic-scale modulations

In modern optics, materials with large birefringence ({\Delta}n, where n is the refractive index) are sought after for polarization control (e.g. in wave plates, polarizing beam splitters, etc.), nonlinear optics and quantum optics (e.g. for phase matching and production of entangled photons), micromanipulation, and as a platform for unconventional light-matter coupling, such as Dyakonov-like surface polaritons and hyperbolic phonon polaritons. Layered "van der Waals" materials, with strong intra-layer bonding and weak inter-layer bonding, can feature some of the largest optical anisotropy; however, their use in most optical systems is limited because their optic axis is out of the plane of the layers and the layers are weakly attached, making the anisotropy hard to access. Here, we demonstrate that a bulk crystal with subtle periodic modulations in its structure -- Sr9/8TiS3 -- is transparent and positive-uniaxial, with extraordinary index n_e = 4.5 and ordinary index n_o = 2.4 in the mid- to far-infrared. The excess Sr, compared to stoichiometric SrTiS3, results in the formation of TiS6 trigonal-prismatic units that break the infinite chains of face-shared TiS6 octahedra in SrTiS3 into periodic blocks of five TiS6 octahedral units. The additional electrons introduced by the excess Sr subsequently occupy the TiS6 octahedral blocks to form highly oriented and polarizable electron clouds, which selectively boost the extraordinary index n_e and result in record birefringence ({\Delta}n > 2.1 with low loss). The connection between subtle structural modulations and large changes in refractive index suggests new categories of anisotropic materials and also tunable optical materials with large refractive-index modulation and low optical losses.

physics.optics↗

arXiv2022

A Fast and Robust Method for Predicting the Phase Stability of Refractory Complex Concentrated Alloys using Pairwise Mixing Enthalpy

The ability to predict the composition- and temperature-dependent stability of refractory complex concentrated alloys (RCCAs) is vital to the design of high-temperature structural alloys. Here, we present a model based on first-principles calculations to predict the thermodynamic stability of multicomponent equimolar solid solutions in a high-throughput manner and apply it to screen over 20,000 compositions. We develop a database that contains pairwise mixing enthalpy of 17 refractory metals using density-functional theory (DFT)-based total energy calculations. To these, we fit thermodynamic solution models that can accurately capture the mixing enthalpy of multicomponent BCC solid solutions. By comparing their energy with DFT-calculated enthalpy of intermetallics from the Materials Project database and using convex hull analyses, we identify the stable phase of any RCCA as a function of temperature. The predicted stability of NbTiZr, NbTiZrV, and NbTiZrVM (M = Mo,Ta,Cr) systems as a function of temperature agree well with prior experimental observations. We apply our model to predict the phase evolution in NbVZr-Tix (0 < x < 1), which is confirmed experimentally using a high-throughput, laser deposition-based synthesis technique. This method provides a fast and accurate way to estimate the phase stability of new RCCAs to expedite their experimental discovery.

cond-mat.mtrl-sci↗

arXiv2021

Equilibrium Phase Diagrams of Isostructural and Heterostructural Two-Dimensional Alloys from First Principles

Alloying is a successful strategy for tuning the phases and properties of two-dimensional (2D) transition metal dichalcogenides (TMDCs). To accelerate the synthesis of new TMDC alloys, we present a method for generating temperature-composition equilibrium phase diagrams by combining first-principles total energy calculations with thermodynamic solution models. This method is applied to three representative 2D TMDC alloys: an isostructural alloy, MoS2(1-x)Te2x, and two heterostructural alloys, Mo1-xWxTe2 and WS2(1-x)Te2x. We show that the mixing enthalpy of the entire composition range of these binary alloys can be reliably represented using a sub-regular solution model fitted to the total energy of a small number of compositions that are calculated using density-functional theory on special quasi-random structures. The sub-regular solution model uses a cubic fit that captures three-body effects that are important in these TMDC alloys having hexagonal structures. By comparing both isostructural and heterostructural phase diagrams generated with this method to those calculated with cluster expansion methods, we demonstrate that this method can be used to rapidly design phase diagrams of TMDC alloys, and related 2D materials.

cond-mat.mtrl-sci↗