arXiv subjects

Jingjin Yu

Publications and source records attributed to Jingjin Yu.

At least 73 records · Page 4Linked to original sources

arXiv2020

Computing High-Quality Clutter Removal Solutions for Multiple Robots

We investigate the task and motion planning problem of clearing clutter from a workspace with limited ingress/egress access for multiple robots. We call the problem multi-robot clutter removal (MRCR). Targeting practical applications where motion planning is non-trivial but is not a bottleneck, we focus on finding high-quality solutions for feasible MRCR instances, which depends on the ability to efficiently compute high-quality object removal sequences. Despite the challenging multi-robot setting, our proposed search algorithms based on A*, dynamic programming, and best-first heuristics all produce solutions for tens of objects that significantly outperform single robot solutions. Realistic simulations with multiple Kuka youBots further confirms the effectiveness of our algorithmic solutions. In contrast, we also show that deciding the optimal object removal sequence for MRCR is computationally intractable.

cs.RO↗

arXiv2020

Optimally Guarding Perimeters and Regions with Mobile Range Sensors

We investigate the problem of using mobile robots equipped with 2D range sensors to optimally guard perimeters or regions, i.e., 1D or 2D sets. Given such a set of arbitrary shape to be guarded, and $k$ mobile sensors where the $i$-th sensor can guard a circular region with a variable radius $r_i$, we seek the optimal strategy to deploy the $k$ sensors to fully cover the set such that $\max r_i$ is minimized. On the side of computational complexity, we show that computing a $1.152$-optimal solution for guarding a perimeter or a region is NP-hard, i.e., the problem is hard to approximate. The hardness result on perimeter guarding holds when each sensor may guard at most two disjoint perimeter segments. On the side of computational methods, for the guarding perimeters, we develop a fully polynomial time approximation scheme (FPTAS) for the special setting where each sensor may only guard a single continuous perimeter segment, suggesting that the aforementioned hard-to-approximate result on the two-disjoint-segment sensing model is tight. For the general problem, we first describe a polynomial-time (2+$ε)$-approximation algorithm as an upper bound, applicable to both perimeter guarding and region guarding. This is followed by a high-performance integer linear programming (ILP) based method that computes near-optimal solutions. Thorough computational benchmarks as well as evaluation on potential application scenarios demonstrate the effectiveness of these algorithmic solutions.

cs.RO↗

arXiv2019

Toward Fast and Optimal Robotic Pick-and-Place on a Moving Conveyor

Robotic pick-and-place (PnP) operations on moving conveyors find a wide range of industrial applications. In practice, simple greedy heuristics (e.g., prioritization based on the time to process a single object) are applied that achieve reasonable efficiency. We show analytically that, under a simplified telescoping robot model, these greedy approaches do not ensure time optimality of PnP operations. To address the shortcomings of classical solutions, we develop algorithms that compute optimal object picking sequences for a predetermined finite horizon. Employing dynamic programming techniques and additional heuristics, our methods scale to up to tens to hundreds of objects. In particular, the fast algorithms we develop come with running time guarantees, making them suitable for real-time PnP applications demanding high throughput. Extensive evaluation of our algorithmic solution over dominant industrial PnP robots used in real-world applications, i.e., Delta robots and Selective Compliance Assembly Robot Arm (SCARA) robots, shows that a typical efficiency gain of around 10-40% over greedy approaches can be realized.

cs.RO↗

arXiv2019

Optimal Perimeter Guarding with Heterogeneous Robot Teams: Complexity Analysis and Effective Algorithms

We perform structural and algorithmic studies of significantly generalized versions of the optimal perimeter guarding (OPG) problem. As compared with the original OPG where robots are uniform, in this paper, many mobile robots with heterogeneous sensing capabilities are to be deployed to optimally guard a set of one-dimensional segments. Two complimentary formulations are investigated where one limits the number of available robots (OPG_LR) and the other seeks to minimize the total deployment cost (OPG_MC). In contrast to the original OPG which admits low-polynomial time solutions, both OPG_LR and OPG_MC are computationally intractable with OPG_LR being strongly NP-hard. Nevertheless, we develop fairly scalable pseudo-polynomial time algorithms for practical, fixed-parameter subcase of OPG_LR; we also develop pseudo-polynomial time algorithm for general OPG_MC and polynomial time algorithm for the fixed-parameter OPG_MC case. The applicability and effectiveness of selected algorithms are demonstrated through extensive numerical experiments.

math.OC↗

arXiv2019

DDM: Fast Near-Optimal Multi-Robot Path Planning using Diversified-Path and Optimal Sub-Problem Solution Database Heuristics

We propose a novel centralized and decoupled algorithm, DDM, for solving multi-robot path planning problems in grid graphs, targeting on-demand and automated warehouse-like settings. Two settings are studied: a traditional one whose objective is to move a set of robots from their respective initial vertices to the goal vertices as quickly as possible, and a dynamic one which requires frequent re-planning to accommodate for goal configuration adjustments. Among other techniques, DDM is mainly enabled through exploiting two innovative heuristics: path diversification and optimal sub-problem solution databases. The two heuristics attack two distinct phases of a decoupling-based planner: while path diversification allows the more effective use of the entire workspace for robot travel, optimal sub-problem solution databases facilitate the fast resolution of local path conflicts. Extensive evaluation demonstrates that DDM achieves high levels of scalability and high levels of solution optimality.

cs.RO↗

arXiv2019

Taming Combinatorial Challenges in Optimal Clutter Removal Tasks

We examine an important combinatorial challenge in clearing clutter using a mobile robot equipped with a manipulator, seeking to compute an optimal object removal sequence for minimizing the task completion time, assuming that each object is grasped once and then subsequently removed. On the structural side, we establish that such an optimal sequence can be NP-hard to compute, even when no two objects to be removed have any overlap. Then, we construct asymptotically optimal and heuristic algorithms for clutter removal. Employing dynamic programming, our optimal algorithm scales to 40 objects. On the other hand, for random clutter, fast greedy algorithms tend to produce solutions comparable to these generated by the optimal algorithm.

cs.RO↗

arXiv2019

Efficient Algorithms for Optimal Perimeter Guarding

We investigate the problem of optimally assigning a large number of robots (or other types of autonomous agents) to guard the perimeters of closed 2D regions, where the perimeter of each region to be guarded may contain multiple disjoint polygonal chains. Each robot is responsible for guarding a subset of a perimeter and any point on a perimeter must be guarded by some robot. In allocating the robots, the main objective is to minimize the maximum 1D distance to be covered by any robot along the boundary of the regions. For this optimization problem which we call optimal perimeter guarding (OPG), thorough structural analysis is performed, which is then exploited to develop fast exact algorithms that run in guaranteed low polynomial time. In addition to formal analysis and proofs, experimental evaluations and simulations are performed that further validate the correctness and effectiveness of our algorithmic results.

cs.RO↗

arXiv2019

Average Case Constant Factor Time and Distance Optimal Multi-Robot Path Planning in Well-Connected Environments

Fast algorithms for optimal multi-robot path planning are sought after in real-world applications. Known methods, however, generally do not simultaneously guarantee good solution optimality and good (e.g., polynomial) running time. In this work, we develop a first low-polynomial running time algorithm, called SplitAngGroup (SaG), that solves the multi-robot path planning problem on grids and grid-like environments, and produces constant factor makespan optimal solutions on average over all problem instances. That is, SaG is an average case O(1)-approximation algorithm and computes solutions with sub-linear makespan. SaG is capable of handling cases when the density of robots is extremely high - in a graph-theoretic setting, the algorithm supports cases where all vertices of the underlying graph are occupied. SaG attains its desirable properties through a careful combination of a novel divide-and-conquer technique, which we denote as global decoupling, and network flow based methods for routing the robots. Solutions from SaG, in a weaker sense, are also a constant factor approximation on total distance optimality.

cs.RO↗

arXiv2019

Integer Programming as a General Solution Methodology for Path-Based Optimization in Robotics: Principles, Best Practices, and Applications

Integer programming (IP) has proven to be highly effective in solving many path-based optimization problems in robotics. However, the applications of IP are generally done in an ad-hoc, problem specific manner. In this work, after examined a wide range of path-based optimization problems, we describe an IP solution methodology for these problems that is both easy to apply (in two simple steps) and high-performance in terms of the computation time and the achieved optimality. We demonstrate the generality of our approach through the application to three challenging path-based optimization problems: multi-robot path planning (MPP), minimum constraint removal (MCR), and reward collection problems RCPs). Associated experiments show that the approach can efficiently produce (near-)optimal solutions for problems with large state spaces, complex constraints, and complicated objective functions. In conjunction with the proposition of the IP methodology, we introduce two new and practical robotics problems: multi-robot minimum constraint removal (MMCR) and multi-robot path planning (MPP) with partial solutions, which can be quickly and effectively solved using our proposed IP solution pipeline.

cs.RO↗

arXiv2018

Fast, High-Quality Dual-Arm Rearrangement in Synchronous, Monotone Tabletop Setups

Rearranging objects on a planar surface arises in a variety of robotic applications, such as product packaging. Using two arms can improve efficiency but introduces new computational challenges. This paper studies the structure of dual-arm rearrangement for synchronous, monotone tabletop setups and develops an optimal mixed integer model. It then describes an efficient and scalable algorithm, which first minimizes the cost of object transfers and then of moves between objects. This is motivated by the fact that, asymptotically, object transfers dominate the cost of solutions. Moreover, a lazy strategy minimizes the number of motion planning calls and results in significant speedups. Theoretical arguments support the benefits of using two arms and indicate that synchronous execution, in which the two arms perform together either transfers or moves, introduces only a small overhead. Experiments support these points and show that the scalable method can quickly compute solutions close to the optimal for the considered setup.

cs.RO↗

arXiv2018

Coordinating the Motion of Labeled Discs with Optimality Guarantees under Extreme Density

We push the limit in planning collision-free motions for routing uniform labeled discs in two dimensions. First, from a theoretical perspective, we show that the constant-factor time-optimal routing of labeled discs can be achieved using a polynomial-time algorithm with robot density over $50\%$ in the limit (i.e., over half of the workspace may be occupied by the discs). Second, from a more practical standpoint, we provide a high performance algorithm that computes near-optimal (e.g., $1.x$) solutions under the same density setting.

cs.RO↗

arXiv2018

Constant Factor Time Optimal Multi-Robot Routing on High-Dimensional Grids in Mostly Sub-Quadratic Time

Let $G = (V, E)$ be an $m_1 \times \ldots \times m_k$ grid. Assuming that each $v \in V$ is occupied by a robot and a robot may move to a neighboring vertex in a step via synchronized rotations along cycles of $G$, we first establish that the arbitrary reconfiguration of labeled robots on $G$ can be performed in $O(k\sum_i m_i)$ makespan and requires $O(|V|^2)$ running time in the worst case and $o(|V|^2)$ when $G$ is non-degenerate (in the current context, a grid is degenerate if it is nearly one dimensional). The resulting algorithm, iSAG, provides average case $O(1)$-approximate (i.e., constant-factor) time optimality guarantee. When all dimensions are of similar size $O(|V|^{\frac{1}{k}})$, the running time of iSAG approaches a linear $O(|V|)$. Define $d_g(p)$ as the largest distance between individual initial and goal configurations over all robots for a given problem instance $p$, building on iSAG, we develop the PartitionAndFlow (PAF) algorithm that computes $O(d_g(p))$ makespan solutions for arbitrary fixed $k \ge 2$, using mostly $o(|V|^2)$ running time. PAF provides worst case $O(1)$-approximation regarding solution time optimality. We note that the worst case running time for the problem is $Ω(|V|^2)$.

cs.RO↗

arXiv2018

SEAR: A Polynomial-Time Multi-Robot Path Planning Algorithm with Expected Constant-Factor Optimality Guarantee

We study the labeled multi-robot path planning problem in continuous 2D and 3D domains in the absence of obstacles where robots must not collide with each other. For an arbitrary number of robots in arbitrary initial and goal arrangements, we derive a polynomial time, complete algorithm that produces solutions with constant-factor optimality guarantees on both makespan and distance optimality, in expectation, under the assumption that the robot labels are uniformly randomly distributed. Our algorithm only requires a small constant factor expansion of the initial and goal configuration footprints for solving the problem, i.e., the problem can be solved in a fairly small bounded region. Beside theoretical guarantees, we present a thorough computational evaluation of the proposed solution. In addition to the baseline implementation, adapting an effective (but non-polynomial time) routing subroutine, we also provide a highly efficient implementation that quickly computes near-optimal solutions. Hardware experiments on the microMVP platform composed of non-holonomic robots confirms the practical applicability of our algorithmic pipeline.

cs.MA↗

arXiv2017

Complexity Results and Fast Methods for Optimal Tabletop Rearrangement with Overhand Grasps

This paper studies the underlying combinatorial structure of a class of object rearrangement problems, which appear frequently in applications. The problems involve multiple, similar-geometry objects placed on a flat, horizontal surface, where a robot can approach them from above and perform pick-and-place operations to rearrange them. The paper considers both the case where the start and goal object poses overlap, and where they do not. For overlapping poses, the primary objective is to minimize the number of pick-and-place actions and then to minimize the distance traveled by the end-effector. For the non-overlapping case, the objective is solely to minimize the travel distance of the end-effector. While such problems do not involve all the complexities of general rearrangement, they remain computationally hard in both cases. This is shown through reductions from well-understood, hard combinatorial challenges to these rearrangement problems. The reductions are also shown to hold in the reverse direction, which enables the convenient application on rearrangement of well studied algorithms. These algorithms can be very efficient in practice despite the hardness results. The paper builds on these reduction results to propose an algorithmic pipeline for dealing with the rearrangement problems. Experimental evaluation, including hardware-based trials, shows that the proposed pipeline computes high-quality paths with regards to the optimization objectives. Furthermore, it exhibits highly desirable scalability as the number of objects increases in both the overlapping and non-overlapping setup.

cs.RO↗

arXiv2017

Efficient, High-Quality Stack Rearrangement

This work studies rearrangement problems involving the sorting of robots or objects in stack-like containers, which can be accessed only from one side. Two scenarios are considered: one where every robot or object needs to reach a particular stack, and a setting in which each robot has a distinct position within a stack. In both cases, the goal is to minimize the number of stack removals that need to be performed. Stack rearrangement is shown to be intimately connected to pebble motion problems, a useful abstraction in multi-robot path planning. Through this connection, feasibility of stack rearrangement can be readily addressed. The paper continues to establish lower and upper bounds on optimality, which differ only by a logarithmic factor, in terms of stack removals. An algorithmic solution is then developed that produces suboptimal paths much quicker than a pebble motion solver. Furthermore, informed search-based methods are proposed for finding high-quality solutions. The efficiency and desirable scalability of the methods is demonstrated in simulation.

cs.RO↗

arXiv2017

High-Quality Tabletop Rearrangement with Overhand Grasps: Hardness Results and Fast Methods

This paper studies the underlying combinatorial structure of a class of object rearrangement problems, which appear frequently in applications. The problems involve multiple, similar-geometry objects placed on a flat, horizontal surface, where a robot can approach them from above and perform pick-and-place operations to rearrange them. The paper considers both the case where the start and goal object poses overlap, and where they do not. For overlapping poses, the primary objective is to minimize the number of pick-and-place actions and then to minimize the distance traveled by the end-effector. For the non-overlapping case, the objective is solely to minimize the end-effector distance. While such problems do not involve all the complexities of general rearrangement, they remain computationally hard challenges in both cases. This is shown through two-way reductions between well-understood, hard combinatorial challenges and these rearrangement problems. The benefit of the reduction is that there are well studied algorithms for solving these well-established combinatorial challenges. These algorithms can be very efficient in practice despite the hardness results. The paper builds on these reduction results to propose an algorithmic pipeline for dealing with the rearrangement problems. Experimental evaluation shows that the proposed pipeline achieves high-quality paths with regards to the optimization objectives. Furthermore, it exhibits highly desirable scalability as the number of objects increases in both the overlapping and non-overlapping setups.

cs.RO↗

arXiv2017

A Portable, 3D-Printing Enabled Multi-Vehicle Platform for Robotics Research and Education

microMVP is an affordable, portable, and open source micro-scale mobile robot platform designed for robotics research and education. As a complete and unique multi-vehicle platform enabled by 3D printing and the maker culture, microMVP can be easily reproduced and requires little maintenance: a set of six micro vehicles, each measuring $8\times 5\times 6$ cubic centimeters and weighing under $100$ grams, and the accompanying tracking platform can be fully assembled in under two hours, all from readily available components. In this paper, we describe microMVP's hardware and software architecture, and the design thoughts that go into the making of the platform. The capabilities of microMVP APIs are then demonstrated with several single- and multi-robot path and motion planning algorithms. microMVP supports all common operation systems.

cs.RO↗

arXiv2015

Intractability of Optimal Multi-Robot Path Planning on Planar Graphs

We study the computational complexity of optimally solving multi-robot path planning problems on planar graphs. For four common time- and distance-based objectives, we show that the associated path optimization problems for multiple robots are all NP-complete, even when the underlying graph is planar. Establishing the computational intractability of optimal multi-robot path planning problems on planar graphs has important practical implications. In particular, our result suggests the preferred approach toward solving such problems, when the number of robots is large, is to augment the planar environment to reduce the sharing of paths among robots traveling in opposite directions on those paths. Indeed, such efficiency boosting structures, such as highways and elevated intersections, are ubiquitous in robotics and transportation applications.

cs.RO↗