arXiv subjects

Jin Zhang

Publications and source records attributed to Jin Zhang.

At least 91 records · Page 5Linked to original sources

arXiv2025

Anisotropic Photostriction and Strain-modulated Carrier Lifetimes in Orthorhombic Semiconductors

We demonstrate anisotropic photostriction in two-dimensional orthorhombic semiconductors using time-dependent density functional theory. By tracing the dynamics of photoexcited carriers, we establish a quantitative link between carrier density and lattice deformation in layered black phosphorus and germanium selenides. The structural response exhibits significant anisotropy, featuring lattice expansion along the armchair direction and contraction along the zigzag direction, which is attributed to the interplay between charge redistribution and intrinsic lattice anisotropy. Both the magnitude and orientation of the photostrictive strains can be tuned by photodoping densities, enabling precise control over the photoinduced response. Notably, the photoinduced strains significantly increase carrier recombination lifetimes by suppressing nonradiative recombination, primarily due to the enlarged bandgap and weakened nonadiabatic coupling. These results provide microscopic insight into the origin of anisotropic photostriction in low-dimensional systems and lay the groundwork for light-controllable, directionally sensitive optomechanical devices at the atomic scale.

cond-mat.mtrl-sci↗

arXiv2025

StableShard: Stable and Scalable Blockchain Sharding with High Concurrency via Collaborative Committees

Sharding enhances blockchain scalability by partitioning nodes into multiple groups for concurrent transaction processing. Configuring a large number of small shards usually helps improve transaction concurrency, but it also increases the fraction of malicious nodes in each shard, easily causing shard corruption and jeopardizing system security. Existing works attempt to improve concurrency by reducing shard sizes while maintaining security, but typically rely on time-consuming recovery of corrupted shards to restore liveness and network-wide consensus. This causes severe system stagnation and limits scalability. To address this, we present StableShard, a sharded blockchain that securely provides high concurrency with stable and scalable performance. The core idea is to carefully co-design the division of labor between proposer shards (PSs) and finalizer committees (FCs): we deliberately assign 1) asymmetric roles and 2) matching parameters to PSs and FCs. Small PSs focus on fast transaction proposal and local validity, while large FCs focus on resolving forks, finalizing PS blocks, and maintaining liveness for faulty PSs via a cross-layer view-change protocol. Moreover, by fine-tuning key system parameters (e.g., shard size, quorum size), we ensure each PS to tolerate <1/2 fraction of malicious nodes without lossing liveness, and allow multiple FCs to securely coexist (each with <1/3 fraction of malicious nodes) for better scalability. Consequently, StableShard can safely configure many smaller PSs to boost concurrency, while FCs and PSs jointly guarantee safety and liveness without system stagnation, leading to stable and scalable performance. Evaluations show that StableShard achieves up to 10x higher throughput than existing solutions and significantly more stable concurrency under attacks.

cs.DC↗

arXiv2025

SpiralShard: Highly Concurrent and Secure Blockchain Sharding via Linked Cross-shard Endorsement

Blockchain sharding improves the scalability of blockchain systems by partitioning the whole blockchain state, nodes, and transaction workloads into different shards. However, existing blockchain sharding systems generally suffer from a small number of shards, resulting in limited concurrency. The main reason is that existing sharding systems require large shard sizes to ensure security. To enhance the concurrency of blockchain sharding securely, we propose SpiralShard. The intuition is to allow the existence of some shards with a larger fraction of malicious nodes (i.e., corrupted shards), thus reducing shard sizes. SpiralShard can configure more and smaller shards for higher concurrency at the same network size. To ensure security with the existence of corrupted shards, we propose the Linked Cross-shard Endorsement (LCE) protocol. According to our LCE protocol, the blocks of each shard are sequentially verified and endorsed (via intra-shard consensus) by a group of shards before being finalized. As a result, a corrupted shard can eliminate forks with the help of the other shards. We implement SpiralShard based on Harmony and conduct extensive evaluations. Experimental results show that, compared with Harmony, SpiralShard achieves around 19x throughput gain under a large network size with 4,000+ nodes.

cs.CR↗

arXiv2025

Artificial Intelligence-Enabled Holistic Design of Catalysts Tailored for Semiconducting Carbon Nanotube Growth

Catalyst design is crucial for materials synthesis, especially for complex reaction networks. Strategies like collaborative catalytic systems and multifunctional catalysts are effective but face challenges at the nanoscale. Carbon nanotube synthesis contains complicated nanoscale catalytic reactions, thus achieving high-density, high-quality semiconducting CNTs demands innovative catalyst design. In this work, we present a holistic framework integrating machine learning into traditional catalyst design for semiconducting CNT synthesis. It combines knowledge-based insights with data-driven techniques. Three key components, including open-access electronic structure databases for precise physicochemical descriptors, pre-trained natural language processing-based embedding model for higher-level abstractions, and physical - driven predictive models based on experiment data, are utilized. Through this framework, a new method for selective semiconducting CNT synthesis via catalyst - mediated electron injection, tuned by light during growth, is proposed. 54 candidate catalysts are screened, and three with high potential are identified. High-throughput experiments validate the predictions, with semiconducting selectivity exceeding 91% and the FeTiO3 catalyst reaching 98.6%. This approach not only addresses semiconducting CNT synthesis but also offers a generalizable methodology for global catalyst design and nanomaterials synthesis, advancing materials science in precise control.

cond-mat.mtrl-sci↗

arXiv2025

Semi-robust equal-order hybridized discontinuous methods

This paper introduces a unified analysis framework of equal-order hybridized discontinuous finite element (HDG) methods. The general framework covers standard HDG, embedded discontinuous finite element, and embedded-hybridized discontinuous finite element methods.

math.NA↗

arXiv2025

Augmenting Iterative Trajectory for Bilevel Optimization: Methodology, Analysis and Extensions

In recent years, there has been a surge of machine learning applications developed with hierarchical structure, which can be approached from Bi-Level Optimization (BLO) perspective. However, most existing gradient-based methods overlook the interdependence between hyper-gradient calculation and Lower-Level (LL) iterative trajectory, focusing solely on the former. Consequently, convergence theory is constructed with restrictive LL assumptions, which are often challenging to satisfy in real-world scenarios. In this work, we thoroughly analyze the constructed iterative trajectory, and highlight two deficiencies, including empirically chosen initialization and default use of entire trajectory for hyper-gradient calculation. To address these issues, we introduce two augmentation techniques including Initialization Auxiliary (IA) and Pessimistic Trajectory Truncation (PTT), and investigate various extension strategies such as prior regularization, different iterative mapping schemes and acceleration dynamics to construct Augmented Iterative Trajectory (AIT) for corresponding BLO scenarios (e.g., LL convexity and LL non-convexity). Theoretically, we provide convergence analysis for AIT and its variations under different LL assumptions, and establish the convergence analysis for BLOs with non-convex LL subproblem. Finally, we demonstrate the effectiveness of AIT through three numerical examples, typical learning and vision applications (e.g., data hyper-cleaning and few-shot learning) and more challenging tasks such as neural architecture search.

math.OC↗

arXiv2025

Spectral entropy prior-guided deep feature fusion architecture for magnetic core loss

Accurate core loss modeling is critical for the design of high-efficiency power electronic systems. Traditional core loss modeling methods have limitations in prediction accuracy. To advance this field, the IEEE Power Electronics Society launched the MagNet Challenge in 2023, the first international competition focused on data-driven power electronics design methods, aiming to uncover complex loss patterns in magnetic components through a data-driven paradigm. Although purely data-driven models demonstrate strong fitting performance, their interpretability and cross-distribution generalization capabilities remain limited. To address these issues, this paper proposes a hybrid model, SEPI-TFPNet, which integrates empirical models with deep learning. The physical-prior submodule employs a spectral entropy discrimination mechanism to select the most suitable empirical model under different excitation waveforms. The data-driven submodule incorporates convolutional neural networks, multi-head attention mechanisms, and bidirectional long short-term memory networks to extract flux-density time-series features. An adaptive feature fusion module is introduced to improve multimodal feature interaction and integration. Using the MagNet dataset containing various magnetic materials, this paper evaluates the proposed method and compares it with 21 representative models from the 2023 challenge and three advanced methods from 2024-2025. The results show that the proposed method achieves improved modeling accuracy and robustness.

cs.LG↗

arXiv2025

X-ray Polarization and Spectral Variations in an Extreme High-Synchrotron-Peaked Blazar 1ES 1101--232

We present the first X-ray polarimetric observation of the extreme high-synchrotron-peaked blazar 1ES 1101--232, conducted by the Imaging X-ray Polarimetry Explorer (IXPE). The data analysis incorporates simultaneous and quasi-simultaneous observations from Swift-XRT and NuSTAR. Our results reveal a significant detection of X-ray polarization in the 2--6 keV band at a confidence level (CL) of 6.6$σ$, with a polarization degree of $Π_{\rm X}=17.9\%\pm2.7\%$ and an electric vector position angle (EVPA) of $ψ_{\rm X}=10^\circ.0\pm4^\circ.4$. An even higher polarization degree of $Π_{\rm X}=38.9\%\pm9.1\%$ with an EVPA of $ψ_{\rm X}=13^\circ.9\pm6^\circ.7$ is observed within a narrower time interval, at a CL of 4.3$σ$. During the IXPE observational campaign, the X-ray spectrum of 1ES 1101--232 exhibits a clear soft-to-hard spectral evolution in the 0.3--10 keV band, although no significant flux variability is detected. Additionally, a clockwise hysteresis loop is identified in the flux--photon index plane. These findings collectively indicate that the X-ray emission from 1ES 1101--232 originates in a region characterized by a well-ordered magnetic field through synchrotron radiation.

astro-ph.HE↗

arXiv2025

Pressure-robust optimally convergent H(div) finite element method without the commuting diagram property for the steady Oseen equations

This work develops a convergence theory for H(div)-conforming finite element methods applied to the steady Oseen problem, focusing on cases where the exact finite element complex holds while the commuting diagram property may fail. The proposed method incorporates vorticity stabilization to ensure optimal-order convergence of the velocity error, especially for convection-dominated cases. As a crucial component of the analysis, exact de Rham and finite element complexes provide a framework whose utility includes establishing velocity error estimates independent of the discrete inf-sup constant. As a representative example, Stenberg finite elements demonstrate the framework's validity and offer several computational advantages: pressure robustness, fewer degrees of freedom than classical RT or BDM elements due to vertex continuity, and convergence without requiring the commuting diagram property. Moreover, the proposed methodology is applicable to a class of finite element pairs that violate the commuting diagram property, thereby offering new possibilities for efficient discretizations of incompressible fluid problems, particularly in high Reynolds number regimes.

math.NA↗

arXiv2025

Wide-Field X-ray Polarimetry for High Energy Astronomical Transients: First results of the pathfinder CXPD Cubesat Mission

The Low Energy Polarization Detector (LPD) is a key component of the next-generation large-scale Gamma-Ray Burst polarimeter, POLAR-2. It is designed for polarization observations of transient sources in the soft X-ray energy range with a wide field of view (FOV). To validate the key technologies required for wide-FOV X-ray polarization measurements, the Cosmic X-ray Polarization Detector (CXPD) CubeSat was developed as a prototype for the LPD. The CXPD is equipped with two Gas Microchannel Plate Pixel Detectors (GMPDs) that measure X-ray polarization via the photoelectric effect, where ejected photoelectrons produce ionization tracks in the gas which are imaged to reconstruct their emission directions. Laboratory calibrations of the modulation factor and energy spectra were successfully performed using linear polarized X-ray sources at 2.98 keV, 4.51 keV, 6.40 keV, and 8.05 keV. Since its launch in June 2023, the CXPD has successfully completed critical in-orbit technology verification. It has also performed polarization observations of two bright X-ray sources Sco X-1 and the transient Swift J1727.8-1613 yielding constraints on their polarization degrees and angles. Notably, this was the first time that an anti-coincidence detector had been implemented in an X-ray polarimeter, enabling in-orbit verification of the charged-particle background rejection algorithm. These results demonstrate the feasibility of wide-field soft X-ray polarization measurements and provide essential guidance for the development of the LPD for the POLAR-2 mission, thereby advancing the frontier of X-ray polarization astronomy.

astro-ph.IM↗

arXiv2025

Context-Aware Dynamic Chunking for Streaming Tibetan Speech Recognition

In this work, we propose a streaming speech recognition framework for Amdo Tibetan, built upon a hybrid CTC/Atten-tion architecture with a context-aware dynamic chunking mechanism. The proposed strategy adaptively adjusts chunk widths based on encoding states, enabling flexible receptive fields, cross-chunk information exchange, and robust adaptation to varying speaking rates, thereby alleviating the context truncation problem of fixed-chunk methods. To further capture the linguistic characteristics of Tibetan, we construct a lexicon grounded in its orthographic principles, providing linguistically motivated modeling units. During decoding, an external language model is integrated to enhance semantic consistency and improve recognition of long sentences. Experimental results show that the proposed framework achieves a word error rate (WER) of 6.23% on the test set, yielding a 48.15% relative improvement over the fixed-chunk baseline, while significantly reducing recognition latency and maintaining performance close to global decoding.

cs.CL↗

arXiv2025

Hard X-ray view of two $γ$-ray detected low-luminosity active galactic nuclei: NGC 315 and NGC 4261

Aims. The accretion disk of low-luminosity active galactic nuclei (LLAGNs) is a radiatively inefficient accretion flow (RIAF). Our goal is to find evidence of RIAF radiation from LLAGNs with jets and analyze their radiation properties, which also adds samples to future research on LLAGNs. Methods. Weconducted an analysis of the X-ray data obtained from NuSTAR and XMM-Newton observations of NGC 315 and NGC 4261, encompassing both timing and spectral investigations. The joint X-ray spectra of the two LLAGNs were fitted using various functional forms and radiative models in XSPEC. Results. No significant variability on timescales of days is observed for both NGC 315 and NGC 4261. The X-ray continuum emission of NGC 315 is suitable for cutoff power-law (PL) fitting, yielding a cutoff energy of Ecut = 18.45 keV, which is the lowest value found in LLAGNssofar. In contrast, the X-ray continuum of NGC 4261 is composed of two PL components, with no signs of a cutoff energy. A prominent neutral Fe Kα line is observed in NGC 315, while an ionized Fe XXV line is seen in NGC 4261. The derived reflection fractions are R = 0.61 for NGC 315 and R = 0.18 for NGC 4579. Neither NGC 315 nor NGC 4261 shows evidence of a Compton reflection bump. Conclusions. The X-ray spectral characteristics support the RIAF emission as the dominant origin of the X-rays in both sources, although an additional soft PL component originating from the inner jet is observed in NGC 4261. The higher reflection fraction compared to other LLAGNs, along with the detection of a neutral Fe Kα line, suggests the existence of a truncated accretion disk with a relatively small radius in NGC 315. Bremsstrahlung radiation appears to be the dominant cooling mechanism for the plasma in NGC315, while Comptonization within the RIAF is more likely responsible for the X-ray emission in NGC 4261.

astro-ph.HE↗

arXiv2025

Hadronic Processes in Advection-Dominated Accretion Flow as the Origin of TeV Excesses in BL Lac Objects

The spectral energy distributions (SEDs) of certain BL Lac objects (BL Lacs) exhibit an additional hard $γ$-ray component in the TeV energy range that surpasses the predictions of the one-zone leptonic jet model. The origin of this excess emission remains unclear. In this study, we selected five BL Lacs whose SEDs display a very hard intrinsic spectrum in the TeV band and successfully reproduced their broadband SEDs using a two-zone lepto-hadronic model. Within this framework, the emission observed in the optical, X-ray, GeV $γ$-ray, and sub-TeV $γ$-ray bands is modeled using the synchrotron and synchrotron self-Compton radiation processes of the relativistic electrons in the jets. Meanwhile, the TeV excess is attributed to $γ$-ray emission resulting from the photomeson ($pγ$) process via $π^0$ decay occurring within advection-dominated accretion flows (ADAFs). This scenario requires a hard proton spectrum with a spectral index of $p \sim 1.6-1.7$ and a cutoff energy ranging from 30 to 90 TeV, as well as a relatively large ADAF radius. Such hard proton spectra suggest that the dominant acceleration mechanisms are likely magnetic reconnection and/or stochastic acceleration processes within ADAFs. Additionally, the emission from the cascaded electrons results in a bump in the keV--MeV band; however, it is overwhelmed by the jet emission. Although the hadronuclear ($pp$) process cannot be entirely ruled out, it would necessitate an even harder proton spectrum and a higher cutoff energy compared to the $pγ$ process, making it a less favorable explanation for the observed TeV excess.

astro-ph.HE↗

arXiv2025

NF-SecRIS: RIS-Assisted Near-Field Physical Layer Security via Secure Location Modulation

The 6G wireless networks impose extremely high requirements on physical layer secure communication. However, the existing solutions usually can only achieve one-dimensional physical layer security (PLS) in the angle dimension, and cannot achieve PLS in the range dimension. In this paper, we propose the NF-SecRIS system, the first range-angle-dependent (2D) PLS near-field communication system based on ultra-large-scale reconfigurable intelligent surface (RIS). We propose the secure location modulation scheme to synthesize the near-field spatial-temporal coding pattern of RIS with extremely low complexity. It ensures that only legitimate user can receive the raw constellations, while potential eavesdroppers at other ranges or angles can only receive the obfuscated constellations. NF-SecRIS operates without requiring synchronization with either transmitter or receiver. We implement a prototype of NF-SecRIS and conduct comprehensive experiments with multiple modulation schemes. The results show that the bit error rate (BER) of legitimate user is below 10^{-4}, while eavesdroppers at other ranges or angles suffer from BER exceeding 40%. It validates the implementation of 2D PLS in near-field communications.

cs.ET↗

arXiv2025

Dual-domain Microwave Photonic Radar for Non-contact High-resolution Monitoring of Vital Signs in Multiple Individuals

We present a dual-domain microwave photonic radar system for multi-parameter vital sign monitoring, utilizing ultra-wideband radiofrequency signals to achieve high-precision chest displacement measurements, while high-frequency optical signals enable accurate Doppler detection of pulse-induced micro-motions. We experimentally validated the system by simultaneously monitoring respiratory and pulse rate of two male volunteers, demonstrating high performance with average accuracies of 98.1% for pulse detection and 99.85% for respiratory detection. Additionally, the system facilitates rapid, indirect blood pressure estimation, achieving a coefficient of determination of 0.905. With the help of low-loss distribution capability of optical fibers, the system can be scaled into a distributed, non-contact multiple vital signs monitoring platform, highlighting its potential for clinical and healthcare applications.

physics.optics↗

arXiv2025

Tibetan Language and AI: A Comprehensive Survey of Resources, Methods and Challenges

Tibetan, one of the major low-resource languages in Asia, presents unique linguistic and sociocultural characteristics that pose both challenges and opportunities for AI research. Despite increasing interest in developing AI systems for underrepresented languages, Tibetan has received limited attention due to a lack of accessible data resources, standardized benchmarks, and dedicated tools. This paper provides a comprehensive survey of the current state of Tibetan AI in the AI domain, covering textual and speech data resources, NLP tasks, machine translation, speech recognition, and recent developments in LLMs. We systematically categorize existing datasets and tools, evaluate methods used across different tasks, and compare performance where possible. We also identify persistent bottlenecks such as data sparsity, orthographic variation, and the lack of unified evaluation metrics. Additionally, we discuss the potential of cross-lingual transfer, multi-modal learning, and community-driven resource creation. This survey aims to serve as a foundational reference for future work on Tibetan AI research and encourages collaborative efforts to build an inclusive and sustainable AI ecosystem for low-resource languages.

cs.CL↗

arXiv2025

Calculating the Luttinger liquid parameter for an interacting Kitaev chain quantum simulator

In this work, we introduce a solid-state platform for building quantum simulators using implanted spin centers in solid-state materials. We build upon the proposal for an $S=1$ chain of spin centers coupled through the magnetic dipole-dipole interaction and subjected to an external magnetic field as a quantum simulator for critical floating phases. We introduce another magnetic field and map the system to the interacting Kitaev chain. This setup, tunable through the applied fields and the orientation of the spin centers within the crystal, exhibits a variety of rich quantum behavior which notably includes floating phases, a $Z_2$ symmetry-breaking phase, and lines of both Berezinskii-Kosterlitz-Thouless (BKT) and Pokrovsky-Talapov transitions. Furthermore, we employ several novel methods to calculate the Luttinger liquid parameter in our model with incommensurate correlations. We find that these methods provide a route to identify BKT transitions with less computational resources than utilizing entanglement entropy and central charge.

cond-mat.str-el↗

arXiv2025

Joint DOA and Attitude Sensing Based on Tri-Polarized Continuous Aperture Array

This paper investigates joint direction-of-arrival (DOA) and attitude sensing using tri-polarized continuous aperture arrays (CAPAs). By employing electromagnetic (EM) information theory, the spatially continuous received signals in tri-polarized CAPA are modeled, thereby enabling accurate DOA and attitude estimation. To facilitate subspace decomposition for continuous operators, an equivalent continuous-discrete transformation technique is developed. Moreover, both self- and cross-covariances of tri-polarized signals are exploited to construct a tri-polarized spectrum, significantly enhancing DOA estimation performance. Theoretical analyses reveal that the identifiability of attitude information fundamentally depends on the availability of prior target snapshots. Accordingly, two attitude estimation algorithms are proposed: one capable of estimating partial attitude information without prior knowledge, and the other achieving full attitude estimation when such knowledge is available. Numerical results demonstrate the feasibility and superiority of the proposed framework.

eess.SP↗