arXiv subjects

Jin Wu

Publications and source records attributed to Jin Wu.

At least 19 recordsLinked to original sources

arXiv2026

HarnessPAI: An Evolving Harness for Physical AI

Physical AI aims to build embodied agents that perceive the world, understand and reason about it, and decide how to act. Yet the field has focused primarily on the last component: the action model that maps observations to low-level controls. The prevailing training recipe can erode the perceptual and reasoning capabilities needed for robust behavior, leaving even strong action models vulnerable to scene perturbations and long-horizon tasks. We introduce HarnessPAI, a model- and embodiment-agnostic Harness framework for Physical AI that treats code as the executable and evolvable interface that organizes the underlying action primitive. The framework separates two timescales: within a rollout, it executes open-loop at the program level, with a fixed program guiding and checking execution; across rollouts, it evolves closed-loop, using execution feedback to revise the program and distill failures into reusable skills. Across desktop robot arms, household robots, a robot vacuum, and a legged walking agent, HarnessPAI demonstrates consistent improvements against baselines. Beyond the harness, the converged program also acts as a low-cost, reliable source of expert data: it generates training data for fine-tuning VLA and WAM models on tasks where it is hard for these models to obtain successful trajectories on their own. Our results suggest that the frontier of Physical AI depends not only on stronger action models, but also on executable harnesses that integrate perception, task understanding and reasoning, and action execution into a unified, verifiable, and feedback-driven system. Website: https://darwin-agent.github.io/HarnessPAI

cs.RO↗

arXiv2026

Can a Display Be Used for Rapid LiDAR-Camera Extrinsic Calibration?

ScreenCalib enables light detection and ranging (LiDAR)--camera extrinsic calibration using an ordinary programmable display, providing known visual markers and controlled geometry while reducing dedicated target preparation. The camera observes displayed AprilTags, whereas the LiDAR measures the physical screen surface and boundary, requiring indirect cross-modal association. Display geometry introduces association ambiguities, while indoor clutter complicates extraction. ScreenCalib addresses these challenges through tag-guided display extraction, geometric hypothesis generation and refinement, and surrounding scene edges for ambiguity resolution. The single-pose mode requires only one static placement. The joint multi-pose mode combines independent static observations through cross-pose consensus and jointly refines the shared extrinsics and tag scale, reducing sensitivity to tag-size measurement errors without requiring continuous motion or inter-pose trajectory estimation. Experiments in simulation and on three different sensor platforms cover mechanical and nonrepetitive LiDARs in clean and cluttered environments. Benchmark results show that ScreenCalib outperforms competitive calibration-board-based methods in translation accuracy. Joint multi-pose refinement further reduces mean rotation and translation errors across the three platforms and improves rendered-map alignment. Evaluation across readily available displays, including cell phones, tablets, laptops, computer monitors, and televisions, further examines ScreenCalib's versatility as a practical alternative to dedicated calibration targets. The source code is available at https://github.com/ZuhaoZou2026/ScreenCalib.

cs.CV↗

arXiv2026

VeriCalib: Verifiable Target-Based LiDAR-Camera Calibration

Target-based extrinsic calibration estimates the rigid transform between sensors from a few observations of a known target, and its result is commonly assessed by the root-mean-square error of the fitted residuals. However, this scalar error is computed on the same observations and therefore cannot indicate whether to accept the result, re-extract, recollect or add observations. This paper presents VeriCalib, which formulates extrinsic calibration as a verifiable estimation problem and reports a calibration state. The key insight is a two-level extrinsic compensation mechanism, in which the extrinsic compensates the rigid part of each observation error at the residual level, and rotation and translation compensate each other at the parameter level. Consequently, the fitted residual can reveal neither an inconsistency between the observations and the model nor whether the estimated extrinsic is reliable in every direction. Accordingly, we assess the calibration through a structured covariance that jointly propagates the uncertainty of the camera and LiDAR board features with a known-geometry prior, and estimate its scale as a variance component from the residuals. On this covariance, we decouple rotation and translation to resolve the precision along each direction and guide data collection toward the weakest one. Since this precision presumes consistent observations, we further develop within-view and cross-view checks that examine the internal residual and the rigid discrepancy between observations, respectively, with thresholds that hold their significance level under an unknown noise level. We also extend the minimal detectable bias to the extrinsic to bound the smallest detectable fault along each direction. These criteria form a calibration state that indicates whether to accept the result or how to collect the data...

cs.RO↗

arXiv2026

PanoBench: A Panoptic Occupancy Prediction Benchmark for Autonomous Driving

Panoptic occupancy unifies 3D geometry, semantics, and instance identities, but its development is limited by scarce instance-aware annotations. Existing benchmarks mainly provide semantic labels reconstructed from incomplete sensor observations, while panoptic datasets have limited domain coverage or annotation completeness. We introduce PanoBench, a camera-centric panoptic occupancy prediction benchmark spanning synthetic and real-world driving scenes. It combines PanoBench-CarlaOcc, PanoBench-nuScenes, and PanoBench-KITTI360 through canonical data interfaces and unified evaluation protocols, providing multi-resolution annotations with persistent instance identities. The synthetic branch derives complete panoptic geometry from simulated meshes. For real-world data, a new pipeline reconstructs backgrounds using geometric priors and topology constraints, generates foreground mesh assets from multi-frame multi-view images, and fuses them into sparse panoptic voxels. A unified valid-mask protocol evaluates complete thing instances supported by temporal observations while scoring stuff regions at the voxel level. Analyses of observation fidelity, geometric completeness, spatial continuity, and temporal consistency demonstrate the benefits of the resulting annotations over existing occupancy benchmarks. We benchmark representative methods on semantic occupancy prediction, panoptic occupancy prediction, and 4D occupancy forecasting, and study voxel resolution, synthetic-to-real transfer, and storage efficiency. These results reveal complementary strengths of volumetric and ray-based metrics and persistent challenges in real-world instance-aware prediction. PanoBench is available at https://mias.group/PanoBench.

cs.CV↗

arXiv2026

DEXTERA: From a Single Image to Deployable Dexterous Manipulation via Real-to-Sim-to-Real

Collecting real-world robot data for dexterous manipulation is costly and time-consuming. While high-fidelity physics simulators enable scalable data synthesis and policy learning, constructing deployment-ready digital twins manually remains labor-intensive, and residual visual, geometric, and dynamics gaps hinder reliable sim-to-real transfer. We present DEXTERA, an automated real-to-sim-to-real framework that transforms a single RGB image into deployable policies for dexterous manipulation across four unified stages: (1) single-image scene factorization into a static Gaussian background and interactive rigid or articulated assets with VLM-inferred physical parameters; (2) metric scene global alignment, object canonicalization, and morphology-balanced robot calibration; (3) scalable simulator task primitive construction, VR teleoperation, and object-centric trajectory synthesis; and (4) a shared multimodal policy interface supporting both imitation learning and reinforcement learning. We evaluate DEXTERA across 13 task-embodiment pairs, 2 dexterous robot platforms, and 6 policy architectures. Experimental results demonstrate that DEXTERA achieves superior visual fidelity and 3D geometric reconstruction compared to generative baselines, while cross-domain trajectory replays validate strong physical interaction consistency. Furthermore, simulation-only trained policies enable viable zero-shot real-robot deployment, while simulation-real co-training substantially improves mean physical policy success from 29.2% to 61.9% across diverse policy architectures. Project website: https://dextera-project.github.io/

cs.RO↗

arXiv2026

Tele-Traversability: Rethinking Traversability for Teleoperated Ground Robots in Terrain Navigation

Teleoperation, a human-in-the-loop control scheme, allows a human operator to remotely command and guide a mobile robot to navigate in off-road environments, yet fluent and user-friendly tele-navigation requires an alignment of traversability evaluation between human and robot. In the teleoperation system, the human operator typically utilizes off-site incomplete and delayed feedback via a human-machine interface to make a judgment of traversability, while the robot makes such an evaluation based on in situ onboard sensory information, which could cause divergent traversability estimation and thus generate mismatched decisions and actions. Existing approaches for traversability modeling, estimation, and prediction are mainly derived from the view of robots, i.e., robot-centric, and are practically suitable for fully autonomous mobile robots, but neglect the influence of human operators. To address this problem, this paper extends the concept of traversability from robot-centric to human-centric by accounting for the operator's cognitive states, such as attention, workload, and risk tolerance or awareness, termed tele-traversability. We first revisit the definitions and roles of traversability in robotics and then extend them to teleoperation settings. Finally, we highlight future trends and open challenges of tele-traversability toward human-centric teleoperation systems.

cs.RO↗

arXiv2026

DCReg: Decoupled Characterization for Efficient Degenerate LiDAR Registration

LiDAR point cloud registration is fundamental to robotic perception and navigation. In geometrically degenerate environments (e.g., corridors), registration becomes ill-conditioned: certain motion directions are weakly constrained, causing unstable solutions and degraded accuracy. Existing detect-then-mitigate methods fail to reliably detect, physically interpret, and stabilize this ill-conditioning without corrupting the optimization. We introduce DCReg (Decoupled Characterization for Ill-conditioned Registration), establishing a detect-characterize-mitigate paradigm that systematically addresses ill-conditioned registration via three innovations. First, DCReg achieves reliable ill-conditioning detection by employing Schur complement decomposition on the Hessian matrix. This decouples the 6-DoF registration into 3-DoF clean rotational and translational subspaces, eliminating coupling effects that mask degeneracy in full-Hessian analyses. Second, within these subspaces, we develop interpretable characterization techniques resolving eigen-basis ambiguities via basis alignment. This establishes stable mappings between eigenspaces and physical motion directions, providing actionable insights on which motions lack constraints and to what extent. Third, leveraging this spectral information, we design a targeted mitigation via a structured preconditioner. Guided by MAP regularization, we implement eigenvalue clamping exclusively within the preconditioner rather than modifying the original problem. This preserves the least-squares objective and minimizer, enabling efficient optimization via Preconditioned Conjugate Gradient with a single interpretable parameter. Experiments demonstrate DCReg achieves 20-50% higher long-duration localization accuracy and 5-30x speedups (up to 116x) over degeneracy-aware baselines across diverse environments. Code: https://github.com/JokerJohn/DCReg

cs.RO↗

arXiv2026

Decoupled Analysis-Judging: An Automated Creativity Evaluator Using LLMs in Complex Multi-step Creativity Tasks

Automated evaluation of creativity tasks remains challenging for LLM-as-a-Judge, as LLM is susceptible to biases such as verbosity bias and leniency bias. Such limitations are particularly evident in Contextually-Grounded and Procedurally-Structured Tasks (CGPST), a complex multi-step creativity task where inter-step dependencies, highly subjectivity, and wide scoring ranges lead to more unstable and biased judgments. Existing approaches either rely on task-specific training or directly apply LLM-as-a-Judge, both of which struggle to ensure reliable evaluation under such complexity. To bridge these gaps, we propose CreaEval, an automated creativity evaluator for CGPST that decouples typical LLM-as-a-Judge into analysis and judging. Correspondingly, CreaEval involves two critical phases: Memory-augmented Analysis, a SoT-LLM converts multi-step responses into structured evaluation evidence, incorporating cross-step memory; and Evidence-based Judging, a Judge-LLM uses the extracted evidence for judging without accessing raw responses. Comprehensive experiments show that CreaEval achieves an average performance improvement of 22.74% over the second-best baselines across CGPST and two classic simple creativity tasks, demonstrating its generalizability. The code is available at https://github.com/Jaong/CreaEval.

cs.CL↗

arXiv2026

Training-Free Interaction-Aligned Visual Token Pruning for Efficient Embodied Manipulation

Efficient visual representation is a central image-processing challenge in embodied manipulation, where policies repeatedly process dense visual-token sequences during closed-loop control. Existing methods rank or prune tokens using semantic relevance, VLM attention, cross-frame redundancy, or motion in the action space. These signals may discard task-relevant regions when instruction-related appearance and observed image motion are not yet spatially aligned. We introduce Interaction-Aligned Pruning (IAprune), a training-free method that treats per-frame budget setting and within-budget token selection as two linked decisions. Semantic--motion spatial agreement guides the choice between Conservative and Aggressive coverage, and the resulting region size is mapped to a calibrated dynamic budget. Continuous semantic and motion responses rank the existing tokens, while geometric residual correction redirects fixed selection slots toward under-represented boundaries without increasing the sequence length. Across four embodied manipulation policies, three simulation benchmarks, and a real-robot platform, IAprune provides a favorable accuracy--efficiency trade-off, matching the unpruned policy on LIBERO with a $1.54\times$ speedup and reaching $1.48\times$ acceleration on a real robot. Phase-wise analysis shows that retention gains are largest under tight budgets early in an episode, while fixed-budget analysis confirms that geometry replaces low-priority tokens with boundary and contact-region evidence rather than retaining more tokens. Our project website is: \href{https://chengjt1999.github.io/VLA-IAP.github.io/}{IAprune.com}.

cs.CV↗

arXiv2026

Pixel Ignores, Superpixel Sees: Adverse Weather Image Restoration via Semantic-Center SSM

Adverse weather image restoration aims to recover clear visibility from degraded images in complex weather conditions. Existing works attempt to address this problem by modeling relationships between pixels, however, this paradigm defies the spatially non-uniformity fact of degradations and learns non-discriminative features from semantic-conflict regions. In this paper, we propose SSR, a \textbf{S}emantic-center guilded \textbf{S}tate space model for image \textbf{R}estoration. The key idea of SSR is to shift the conventional scanning strategy of pixel-serial to semantic-guilded one. Specifically, we introduce a Superpixel-guided Selective Scan Mechanism ($\text{S}^3$M), which first partitions the image into perceptually coherent regions via superpixel clustering and then performs relations modeling within the semantic-related regions. Moreover, a Region-level Gating Mechanism (RGM) is developed to perform intra-region calibration by modulating degradation outliers within each semantic superpixel unit along the channel dimension. Extensive experiments on \textbf{6} well-established benchmarks demonstrate that SSR performs favorably against state-of-the-art models with competitive computational cost.

cs.CV↗

arXiv2026

Cross-Coordinate Correspondence Pruning for Image-to-Point Cloud Registration

Recent detection-free approaches have shown significant efficacy in image-to-point cloud (I2P) registration by employing a coarse-to-fine matching pipeline. In the coarse stage, down-sampled image features and voxelized point cloud features are typically fused to establish initial coarse correspondences for subsequent refinement. However, existing methods largely overlook the critical role of point cloud density, which fundamentally dictates the quality of coarse correspondences and the final registration results. Specifically, excessively sparse point clouds lead to an insufficient number of inliers, while overly dense ones often introduce a high outlier ratio. Consequently, this creates an inherent density trade-off, thereby significantly limiting the registration accuracy of current approaches. For mitigating this trade-off, we propose a novel Cross-Coordinate Correspondences Pruning (CCP) strategy to acquire sufficient inliers while ensuring a low outlier ratio. To minimize interference from inter-modal coordinate discrepancies, we first project cross-coordinate coarse correspondences to the 2D image coordinate system for spatial unification. Subsequently, a lightweight pruning network is responsible for predicting the inlier confidences, which are used to filter coarse outliers, from coordinate geometric and modal feature dimensions. To maximize inlier recall, we further design a Multi-Density Point Ensemble (MDPE) strategy that consolidates and deduplicates pruned coarse correspondences across varying point cloud densities. Our method achieves a significant performance improvement, surpassing existing state-of-the-art methods by at least 8.6% in Registration Recall across various benchmarks.

cs.CV↗

arXiv2026

VersaQ-3D: Architecture Support for Visual Geometry Grounded Transformers via Versatile Quantization

3D reconstruction and view synthesis are fundamental to AR/VR, robotics, and digital twins. The Visual Geometry Grounded Transformer (VGGT) enables strong feed-forward 3D reconstruction while its billion-parameter scale limits on-device deployment. LLM-oriented quantization methods fail on VGGT due to saturated activation channels that resist low-bit quantization and diverse 3D semantics that impede calibration. VGGT further poses hardware challenges from multi-precision architecture support and long-sequence global attention with excessive memory demands. We propose VersaQ-3D, an algorithm-architecture co-design framework for efficient VGGT inference. At the algorithm level, we present the first calibration-free, input-agnostic quantization method for VGGT, leveraging transform coding to suppress outliers and preserve structural weight features, enabling robust low-bit inference down to 4 bits. At the architecture level, we design a reconfigurable accelerator with a hierarchical multi-precision compute unit (BF16/INT8/INT4) that executes both linear and non-linear operators within a shared systolic datapath, reducing end-to-end latency by 77%. A two-stage recomputation-based tiling strategy further cuts runtime by 7% by alleviating on-chip memory pressure for long-sequence attention. Evaluations across various datasets show that VersaQ-3D incurs negligible accuracy loss at W4A8 and consistently achieves leading accuracy at W4A4 over prior quantization methods across diverse scenes. The co-designed accelerator delivers 5.4$\times$-22.0$\times$ speedup over edge GPUs and 2.2$\times$-3.0$\times$ over prior quantization-based accelerators under iso-PE-area comparison, enabling instant and energy-efficient feed-forward 3D reconstruction on edge devices.

cs.AR↗

arXiv2026

Understanding the Intermittency Signal in RHIC-STAR Data through Modeling

Intermittency analysis provides a promising probe of scale-invariant density fluctuations near the QCD critical point. The intermittency measurements reported in the STAR BES-I data call for a quantitative assessment of the signal strength and a clearer physical understanding of its collision-energy dependence. In this work, we perform such a study for the STAR measurements using an improved hybrid UrQMD+CMC model, in which critical-like fluctuations are embedded into a realistic non-critical background through event-level, particle-level, and combined replacement schemes. By directly comparing the second-order factorial moment $ΔF_{2}(M)$ between model calculations and experimental data on a point-by-point basis, we constrain the effective critical-like contribution compatible with the STAR measurements without relying on scaling exponents. The STAR data at $\sqrt{s_{\mathrm{NN}}}=7.7$--$27~\mathrm{GeV}$ used for model comparison can be consistently described only by small and nearly energy-independent effective critical-like fractions. These results indicate that the current BES-I intermittency signal is weak and exhibits little collision-energy dependence, thereby favoring only a limited critical-like contribution rather than a strong critical-point-induced enhancement localized near a specific collision energy.

nucl-th↗

arXiv2026

PsyScore: A Psychometrically-Aware Framework for Trait-Adaptive Essay Scoring and ZPD-Scaffolded Feedback

Effective Automated Essay Scoring (AES) are expected to support both reliable assessment and actionable instructional feedback. However, existing approaches often treat scoring and feedback as separate components: neural scoring models provide limited interpretability, while Large Language Model (LLM)-based feedback is typically insensitive to learners proficiency levels. To address this fragmentation, this work proposes PsyScore, a psychometrically-aware framework that integrates diagnostic assessment with instructional scaffolding through a shared latent ability representation. PsyScore comprises three key modules: a Trait-Adaptive Neural IRT Scorer that incorporates the Graded Partial Credit Model (GPCM) into a neural architecture, enabling the precise estimation of student ability while maintaining psychometric interpretability, a ZPD-Scaffolded Feedback Generator, which conditions multi-agent feedback strategies on the diagnosed ability parameter to adapt instructional focus across different proficiency levels, and a Multi-Perspective Feedback Evaluation Strategy that assesses feedback quality via pairwise preference judgements and student revision simulations. Experiments on the ASAP++ dataset demonstrate that PsyScore achieves competitive scoring performance while providing more pedagogically aligned feedback.

cs.CL↗

arXiv2026

IntElicit: Eliciting and Assessing Contextualized Creativity via Dialogue Policy Optimization

Contextualized assessment offers high ecological validity for evaluating creativity but introduces a critical challenge: observed performance may be confounded with cognitive proficiency (domain knowledge) and agency (willingness to engage). Meanwhile, in the age of generative AI, creative problem solving increasingly occurs in tool-mediated and human--AI interactive environments, making fully static assessment less aligned with contemporary creative practice. To address these issues, this paper proposes IntElicit, a framework for eliciting and assessing contextualized creativity via dialogue policy optimization. IntElicit functions as a constrained adaptive AI Interviewer: it provides non-directive knowledge and agency scaffolds in multi-turn interaction to reduce non-creative confounders, while preserving participants' responsibility for generating the creative content being evaluated. Specifically, to tackle sparse rewards and potential reward hacking (e.g., answer dictation) in open-ended educational dialogue, IntElicit introduces a decomposed process reward mechanism. This mechanism aligns the policy with pedagogical elicitation, rewarding prompts that draw out participant reasoning rather than producing optimal answers on their behalf. Extensive experiments, including participant simulation and a human subject study (N=64), show that IntElicit improves elicited creative outcomes over expert-designed baselines. Together, the results suggest that interactive elicitation can reveal creative potential that static FPSP-style assessment may miss, providing a formative and diagnostic lens for contextualized creativity assessment in AI-mediated learning contexts.

cs.AI↗

arXiv2026

Beyond First-Order: Learning Riemannian Geometries for Invariant Visual Place Recognition

Visual Place Recognition (VPR) demands representations robust to drastic environmental and viewpoint shifts. Existing aggregation paradigms either depend on extensive supervised training or rely on first-order pooling, often struggling to preserve structural correlations under extreme shifts or incurring high adaptation costs. In this work, we propose Riemannian Invariant Aggregation (RIA), a unified geometric framework that explicitly models second-order scene structure on the Symmetric Positive Definite (SPD) manifold. By treating perturbations as tractable congruence transformations, RIA leverages geometry-aware Riemannian mappings to project covariance descriptors into a linearized Euclidean space, effectively preserving invariant structural components while suppressing noise. Extensive evaluations demonstrate that RIA achieves zero-shot performance comparable to supervised methods, and establishes state-of-the-art accuracy with simple fine-tuning, particularly in unstructured environments. The source code will be released.

cs.CV↗

arXiv2026

HCSG: Human-Centric Semantic-Geometric Reasoning for Vision-Language Navigation

VLN has achieved remarkable progress by scaling data and model capacity. However, the assumption of a static environment breaks down in real-world indoor scenarios, where robots inevitably encounter dynamic pedestrians. Existing human-aware approaches typically treat humans merely as moving obstacles based on implicit visual cues, lacking the explicit reasoning required to interpret human intentions or maintain social norms. To address this, we propose HCSG, the first human-centric framework for VLN. This framework provides a robust foundation for safe, socially intelligent navigation in dynamic human-robot environments that shifts the paradigm from passive collision avoidance to active human behavior understanding. Specifically, HCSG introduces a unified Human Understanding Module that synergizes two key capabilities: (i) geometric forecasting, which predicts human pose and trajectory to anticipate future motion dynamics; and (ii) semantic interpretation, which leverages a Vision-Language Model (VLM) to generate natural language descriptions of human actions and intentions. These semantic-geometric representations are fused into the agent's topological map for instruction-conditioned planning. Furthermore, a social distance loss is introduced to enforce socially compliant interaction distances. Extensive experiments on the HA-VLNCE benchmark demonstrate that HCSG significantly outperforms state-of-the-art methods, achieving a 14% improvement in Success Rate and a 34% reduction in Collision Rate. Our project can be seen at https://haoxuanxu1024.github.io/HCSG/.

cs.RO↗

arXiv2026

Coarse Graining Reveals a Fluctuation-theorem-like Asymmetry in Financial Markets

Fluctuation theorems show how coarse graining transforms microscopic symmetry into observable irreversibility. Here we ask whether an analogous symmetrybased diagnostic can be constructed for financial markets. At the microscopic level, each transaction pairs a buyer and a seller, whereas trading decisions are typically made from coarse-grained price histories. Using symmetric takeprofit and stop-loss rules, we compare the holding-time distributions of long and short trading ensembles generated from the same price series. Across equityindices, individual stocks and cryptocurrencies, the log-ratio of the two distributions shows a robust crossover. It remains nearly constant at short durations but becomes linear in the tail, implying an exponential directional asymmetry. The tail slope defines an effective market temperature, an operational measure of fluctuation intensity on the chosen observation scale. A Bachelier first-passage benchmark captures the exponential tails but not the asymmetry, because long and short positions share the same leading decay rate. By contrast, short-time correlations between overlapping positions provide a minimal mechanism for the asymmetry by generating direction-dependent subleading relaxation spectra in a coarse-grained Markov description. Together, these results establish a fluctuation-theorem-like diagnostic of irreversibility in financial markets and, more broadly, in complex systems accessible only through coarse-grained observables.

cond-mat.stat-mech↗