arXiv subjects

Jim Thomson

Publications and source records attributed to Jim Thomson.

5 recordsLinked to original sources

arXiv2026

Implications of Doppler shift for High Frequency Ocean Waves Measured Using Drifting Buoys

The advent of expendable wave buoys has greatly expanded the data available for evaluating and calibrating wave models. Ideally, the newer buoys now drifting around the world's oceans would be merged with conventional time series measurements from moored buoys to form a consistent dataset of in situ observations. However, a comparison across several buoy types (moored Datawell, moored NDBC, and two types of drifting buoys) suggests large differences in the high frequency portion of the observed wave energy spectra (0.2 to 0.6 Hz). When binned by wind speed, the moored Datawell buoys have higher energy in the high frequency tail vs. drifting buoys, by factor 1.2 to 1.6. The moored Datawell buoys also have far better agreement with high-frequency energy levels predicted by a numerical wave model. The key to the difference appears to be the reference frame of the observations. To test this hypothesis, the spectra are adjusted from the drifting reference frame to the fixed reference frame. The adjustment is a two-step process, in which the buoy-observed frequencies are first shifted to an intrinsic reference frame, providing wavenumber at each frequency, and then the drifter-observed spectrum is Doppler shifted to the fixed reference frame. Two methods for estimation of buoy drift are tested; one is based on wind speed, and one is based on buoy positions. With this adjustment, the observations from the drifting buoys become more consistent with the moored Datawell buoys, though discrepancies still exist with the moored NDBC buoys.

physics.ao-ph↗

arXiv2025

Buoy observation of high frequency ocean wave energy: accuracy, consistency, and concerns for predictive applications

Observational data from buoys are of primary importance during the development, calibration, and evaluation of ocean wave models, and these data are also used to make real-time corrections to operational models via data assimilation. By association, systematic inaccuracies in any buoy data are equally important, and thus when two buoy types provide systematically inconsistent information, this is a concern for anyone using an ocean wave model. This report is concerned with the accuracy of the high frequency portion of the ocean wave spectrum commonly observable by buoys, roughly 0.2 to 0.6 Hz. We evaluate four buoy types (two moored, two drifting) using two quantitative measures. The first involves comparing each type with a co-located ocean wave model. The second method involves evaluation of high frequency energy level as a function of wind speed. Both evaluation methods suggest that the Datawell Waverider (DWR) buoys have a strong tendency to report higher energy levels than the other three buoy types. We evaluate high frequency energy level using three different metrics (mean square slope, energy in a band of high frequencies, and spectral density at a single, specific band, 0.4 Hz), and the conclusions are found to be insensitive to the parameter used.

physics.ao-ph↗

arXiv2024

More room at the top: how small buoys aim at the detailed dynamics of the air-sea interface

Air-sea exchange processes have been identified as essential for both short- and long-term atmospheric and ocean forecasts. The two phases of the fluid layer covering our planet interact across a vast range of scales that we need to explore to achieve a better understanding of the exchange processes. While satellites provide a distributed large-scale view of the sea surface situation, highly detailed measurements, e.g., from oceanographic towers, are necessarily local. The required intermediate solution (i.e., data that are both accurate and distributed) can be provided by swarms of miniature surface buoys. As size, weight, and cost are reduced, these can be deployed in large numbers to investigate specific processes that are at present only crudely parameterized in our models as a result of scarcity of good measurements. Perhaps the most crucial process is white-capping in stormy conditions, where air-sea exchanges are enhanced by one or two orders of magnitude. Other applications include wave-current interactions, wave-ice interactions, and plunging breakers in the coastal zone. Following a dedicated workshop, we summarize here the main findings and possibilities derived from the different approaches, and summarize the state of the art for a selection of miniature buoys. We list the solutions presented at the workshop, as well as other similar buoys, with their main characteristics and range of application. We describe the various possibilities of practical use and the scientific and engineering problems to be solved. Looking to the future, we also point out where the present technological improvements are leading to.

physics.ao-ph↗

arXiv2019

A unified breaking onset criterion for surface gravity water waves in arbitrary depth

We investigate the validity and robustness of the Barthelemy et al. (2018) breaking wave onset prediction framework for surface gravity water waves in arbitrary water depth, including shallow water breaking over varying bathymetry. We show that the Barthelemy et al. (2018) breaking onset criterion, which they validated for deep and intermediate water depths, also segregates breaking crests from non-breaking crests in shallow water, with subsequent breaking always following the exceedance of their proposed generic breaking threshold. We consider a number of representative wave types, including regular, irregular, solitary, and focused waves, shoaling over idealized bed topographies including an idealized bar geometry and a mildly- to steeply-sloping planar beach. Our results show that the new breaking onset criterion is capable of detecting single and multiple breaking events in time and space in arbitrary water depth. Further, we show that the new generic criterion provides improved skill for signaling imminent breaking onset, relative to the available kinematic or geometric breaking onset criteria in the literature. In particular, the new criterion is suitable for use in wave-resolving models that cannot intrinsically detect the onset of wave breaking.

physics.flu-dyn↗

arXiv2018

On the ocean wave attenuation rate in grease-pancake ice, a comparison of viscous layer propagation models with field data

The ability of viscous layer models to describe the attenuation of waves propagating in grease-pancake ice covered ocean is investigated. In particular, the Keller's model Keller [1998], the two-layer viscous model [De Carolis and Desiderio 2002] and the close-packing model [De Santi and Olla 2017] are extensively validated by using wave attenuation data collected during two different field campaigns (Weddell Sea, Antarctica, April 2000; western Arctic Ocean, autumn 2015). We use these data to validate the three models by minimizing the differences between the measured and model wave attenuation; the retrieved ice thickness is then compared with measured data. The three models allow to fit the observation data, but with important differences in the three cases. The close-packing model shows good agreement with the data for values of the ice viscosity comparable to those of grease ice in laboratory experiments. For thin ice, the Keller's model performance is similar to that of the close-packing model, while for thick ice much larger values of the ice viscosity are required, which reflects the different ability of the two models to take into account the effect of pancakes. The improvement of performance over the Keller's model achieved by the two-layer viscous model is minimal, which reflects the marginal role in the dynamics of a finite eddy viscosity in the ice-free layer. A good ice thickness retrieval can be obtained by considering the ice layer as the only source in the wave dynamics, so that the wind input can be disregarded.

physics.ao-ph↗