arXiv Science⌕ Search

arXiv subjects

Jie Yu

Publications and source records attributed to Jie Yu.

At least 127 records · Page 7Linked to original sources

Asteroseismology of luminous red giants with Kepler I: Long Period Variables with radial and non-radial modes

While long period variables (LPVs) have been extensively investigated, especially with MACHO and OGLE data for the Magellanic Clouds, there still exist open questions in their pulsations regarding the excitation mechanisms, radial order and angular degree assignment. Here, we perform asteroseismic analyses on LPVs observed by the 4-year Kepler mission. Using a cross-correlation method, we detect unambiguous pulsation ridges associated with radial fundamental modes ($n=1$) and overtones ($n\geqslant2$), where the radial order assignment is made by using theoretical frequencies and observed frequencies. Our results confirm that the amplitude variability seen in semiregulars is consistent with oscillations being solar-like. We identify that the dipole modes, $l=1$, are dominant in the radial orders of $3\leq n \leq6$, and that quadrupole modes, $l=2$, are dominant in the first overtone $n=2$. A test of seismic scaling relations using Gaia DR2 parallaxes reveals the possibility that the relations break down when $ν_{\rm max}$ $\lesssim$ 3 $μ$Hz (R $\gtrsim$ 40 R$_{\odot}$, or log $\rm L/L_{\odot}$ $\gtrsim$ 2.6). Our homogeneous measurements of pulsation amplitude and period for 3213 LPVs will be very valuable for probing effects of pulsation on mass loss, in particular in those stars with periods around 60 days, which has been argued as a threshold of substantial pulsation-triggered mass loss.

astro-ph.SR↗

Multi-Modal Three-Stream Network for Action Recognition

Human action recognition in video is an active yet challenging research topic due to high variation and complexity of data. In this paper, a novel video based action recognition framework utilizing complementary cues is proposed to handle this complex problem. Inspired by the successful two stream networks for action classification, additional pose features are studied and fused to enhance understanding of human action in a more abstract and semantic way. Towards practices, not only ground truth poses but also noisy estimated poses are incorporated in the framework with our proposed pre-processing module. The whole framework and each cue are evaluated on varied benchmarking datasets as JHMDB, sub-JHMDB and Penn Action. Our results outperform state-of-the-art performance on these datasets and show the strength of complementary cues.

cs.CV↗

The K2 Bright Star Survey I: Methodology and Data Release

While the Kepler Mission was designed to look at tens of thousands of faint stars (V > 12), brighter stars that saturated the detector are important because they can be and have been observed very accurately by other instruments. By analyzing the unsaturated scattered-light `halo' around these stars, we have retrieved precise light curves of most of the brightest stars in K2 fields from Campaign~4 onwards. The halo method does not depend on the detailed cause and form of systematics, and we show that it is effective at extracting light curves from both normal and saturated stars. The key methodology is to optimize the weights of a linear combination of pixel time series with respect to an objective function. We test a range of such objective functions, finding that lagged Total Variation, a generalization of Total Variation, performs well on both saturated and unsaturated K2 targets. Applying this to the bright stars across the K2 Campaigns reveals stellar variability ubiquitously, including effects of stellar pulsation, rotation, and binarity. We describe our pipeline and present a catalogue of the 161 bright stars, with classifications of their variability, asteroseismic parameters for red giants with well-measured solar-like oscillations, and remarks on interesting objects. These light curves are publicly available as a High Level Science Product from the Mikulski Archive for Space Telescopes (MAST).

astro-ph.SR↗

The Kepler Smear Campaign: Light curves for 102 Very Bright Stars

We present the first data release of the Kepler Smear Campaign, using collateral 'smear' data obtained in the Kepler four-year mission to reconstruct light curves of 102 stars too bright to have been otherwise targeted. We describe the pipeline developed to extract and calibrate these light curves, and show that we attain photometric precision comparable to stars analyzed by the standard pipeline in the nominal Kepler mission. In this paper, aside from publishing the light curves of these stars, we focus on 66 red giants for which we detect solar-like oscillations, characterizing 33 of these in detail with spectroscopic chemical abundances and asteroseismic masses as benchmark stars. We also classify the whole sample, finding nearly all to be variable, with classical pulsations and binary effects. All source code, light curves, TRES spectra, and asteroseismic and stellar parameters are publicly available as a Kepler legacy sample.

astro-ph.SR↗

Predicting radial-velocity jitter induced by stellar oscillations based on Kepler data

Radial-velocity (RV) jitter due to intrinsic stellar variability introduces challenges when characterizing exoplanet systems, particularly when studying small (sub-Neptune-sized) planets orbiting solar-type stars. In this Letter we predicted for dwarfs and giants the jitter due to stellar oscillations, which in velocity have much larger amplitudes than noise introduced by granulation. We then fitted the jitter in terms of the following sets of stellar parameters: (1) Luminosity, mass, and effective temperature: the fit returns precisions (i.e., standard deviations of fractional residuals) of 17.9% and 27.1% for dwarfs and giants, respectively. (2) Luminosity, effective temperature, and surface gravity: The precisions are the same as using the previous parameter set. (3) Surface gravity and effective temperature: we obtain a precision of 22.6% for dwarfs and 27.1% for giants. (4): Luminosity and effective temperature: the precision is 47.8% for dwarfs and 27.5% for giants. Our method will be valuable for anticipating the radial-velocity stellar noise level of exoplanet host stars to be found by the TESS and PLATO space missions, and thus can be useful for their follow-up spectroscopic observations. We provide publicly available code (https://github.com/Jieyu126/Jitter) to set a prior for the jitter term as a component when modeling the Keplerian orbits of the exoplanets.

astro-ph.EP↗

Asteroseismology of 16000 Kepler Red Giants: Global Oscillation Parameters, Masses, and Radii

The Kepler mission has provided exquisite data to perform an ensemble asteroseismic analysis on evolved stars. In this work we systematically characterize solar-like oscillations and granulation for 16,094 oscillating red giants, using end-of-mission long-cadence data. We produced a homogeneous catalog of the frequency of maximum power (typical uncertainty $σ_{ν_{\rm max}}$=1.6\%), the mean large frequency separation ($σ_{Δν}$=0.6\%), oscillation amplitude ($σ_{\rm A}$=4.7\%), granulation power ($σ_{\rm gran}$=8.6\%), power excess width ($σ_{\rm width}$=8.8\%), seismically-derived stellar mass ($σ_{\rm M}$=7.8\%), radius ($σ_{\rm R}$=2.9\%), and thus surface gravity ($σ_{\log g}$=0.01 dex). Thanks to the large red giant sample, we confirm that red-giant-branch (RGB) and helium-core-burning (HeB) stars collectively differ in the distribution of oscillation amplitude, granulation power, and width of power excess, which is mainly due to the mass difference. The distribution of oscillation amplitudes shows an extremely sharp upper edge at fixed $ν_{\rm max}$, which might hold clues to understand the excitation and damping mechanisms of the oscillation modes. We find both oscillation amplitude and granulation power depend on metallicity, causing a spread of 15\% in oscillation amplitudes and a spread of 25\% in granulation power from [Fe/H]=-0.7 to 0.5 dex. Our asteroseismic stellar properties can be used as reliable distance indicators and age proxies for mapping and dating galactic stellar populations observed by Kepler. They will also provide an excellent opportunity to test asteroseismology using Gaia parallaxes, and lift degeneracies in deriving atmospheric parameters in large spectroscopic surveys such as APOGEE and LAMOST.

astro-ph.SR↗

Deep Learning Classification in Asteroseismology Using an Improved Neural Network: Results on 15000 Kepler Red Giants and Applications to K2 and TESS Data

Deep learning in the form of 1D convolutional neural networks have previously been shown to be capable of efficiently classifying the evolutionary state of oscillating red giants into red giant branch stars and helium-core burning stars by recognizing visual features in their asteroseismic frequency spectra. We elaborate further on the deep learning method by developing an improved convolutional neural network classifier. To make our method useful for current and future space missions such as K2, TESS and PLATO, we train classifiers that are able to classify the evolutionary states of lower frequency resolution spectra expected from these missions. Additionally, we provide new classifications for 8633 Kepler red giants, out of which 426 have previously not been classified using asteroseismology. This brings the total to 14983 Kepler red giants classified with our new neural network. We also verify that our classifiers are remarkably robust to suboptimal data, including low signal-to-noise and incorrect training truth labels.

astro-ph.IM↗

Mass and Age of Red Giant Branch Stars Observed with LAMOST and \emph{Kepler}

Obtaining accurate and precise masses and ages for large numbers of giant stars is of great importance for unraveling the assemblage history of the Galaxy. In this paper, we estimate masses and ages of 6940 red giant branch (RGB) stars with asteroseismic parameters deduced from \emph{Kepler} photometry and stellar atmospheric parameters derived from LAMOST spectra. The typical uncertainties of mass is a few per cent, and that of age is $\sim$\,20 per cent. The sample stars reveal two separate sequences in the age -- [$α$/Fe] relation -- a high--$α$ sequence with stars older than $\sim$\,8\,Gyr and a low--$α$ sequence composed of stars with ages ranging from younger than 1\,Gyr to older than 11\,Gyr. We further investigate the feasibility of deducing ages and masses directly from LAMOST spectra with a machine learning method based on kernel based principal component analysis, taking a sub-sample of these RGB stars as a training data set. We demonstrate that ages thus derived achieve an accuracy of $\sim$\,24 per cent. We also explored the feasibility of estimating ages and masses based on the spectroscopically measured carbon and nitrogen abundances. The results are quite satisfactory and significantly improved compared to the previous studies.

astro-ph.SR↗

Seeing double with K2: Testing re-inflation with two remarkably similar planets around red giant branch stars

Despite more than 20 years since the discovery of the first gas giant planet with an anomalously large radius, the mechanism for planet inflation remains unknown. Here, we report the discovery of EPIC228754001.01, an inflated gas giant planet found with the NASA K2 Mission, and a revised mass for another inflated planet, K2-97b. These planets reside on ~9 day orbits around host stars which recently evolved into red giants. We constrain the irradiation history of these planets using models constrained by asteroseismology and Keck/HIRES spectroscopy and radial velocity measurements. We measure planet radii of 1.31 +\- 0.11 Rjup and and 1.30 +\- 0.07 Rjup, respectively. These radii are typical for planets receiving the current irradiation, but not the former, zero age main sequence irradiation of these planets. This suggests that the current sizes of these planets are directly correlated to their current irradiation. Our precise constraints of the masses and radii of the stars and planets in these systems allow us to constrain the planetary heating efficiency of both systems as 0.03% +0.03%/-0.02%. These results are consistent with a planet re-inflation scenario, but suggest the efficiency of planet re-inflation may be lower than previously theorized. Finally, we discuss the agreement within 10% of stellar masses and radii, and planet masses, radii, and orbital periods of both systems and speculate that this may be due to selection bias in searching for planets around evolved stars.

astro-ph.EP↗

Deep Learning Classification in Asteroseismology

In the power spectra of oscillating red giants, there are visually distinct features defining stars ascending the red giant branch from those that have commenced helium core burning. We train a one-dimensional convolutional neural network by supervised learning to automatically learn these visual features from images of folded oscillation spectra. By training and testing on \textit{Kepler} red giants, we achieve an accuracy of up to 99\% in separating helium-burning red giants from those ascending the red giant branch. The convolutional neural network additionally shows capability in accurately predicting the evolutionary states of 5379 previously unclassified \textit{Kepler} red giants, by which we now have greatly increased the number of classified stars.

astro-ph.SR↗

Attention-based Natural Language Person Retrieval

Following the recent progress in image classification and captioning using deep learning, we develop a novel natural language person retrieval system based on an attention mechanism. More specifically, given the description of a person, the goal is to localize the person in an image. To this end, we first construct a benchmark dataset for natural language person retrieval. To do so, we generate bounding boxes for persons in a public image dataset from the segmentation masks, which are then annotated with descriptions and attributes using the Amazon Mechanical Turk. We then adopt a region proposal network in Faster R-CNN as a candidate region generator. The cropped images based on the region proposals as well as the whole images with attention weights are fed into Convolutional Neural Networks for visual feature extraction, while the natural language expression and attributes are input to Bidirectional Long Short- Term Memory (BLSTM) models for text feature extraction. The visual and text features are integrated to score region proposals, and the one with the highest score is retrieved as the output of our system. The experimental results show significant improvement over the state-of-the-art method for generic object retrieval and this line of research promises to benefit search in surveillance video footage.

cs.CV↗

Drug-drug Interaction Extraction via Recurrent Neural Network with Multiple Attention Layers

Drug-drug interaction (DDI) is a vital information when physicians and pharmacists intend to co-administer two or more drugs. Thus, several DDI databases are constructed to avoid mistakenly combined use. In recent years, automatically extracting DDIs from biomedical text has drawn researchers' attention. However, the existing work utilize either complex feature engineering or NLP tools, both of which are insufficient for sentence comprehension. Inspired by the deep learning approaches in natural language processing, we propose a recur- rent neural network model with multiple attention layers for DDI classification. We evaluate our model on 2013 SemEval DDIExtraction dataset. The experiments show that our model classifies most of the drug pairs into correct DDI categories, which outperforms the existing NLP or deep learning methods.

cs.CL↗

Theoretical stability in coefficient inverse problems for general hyperbolic equations with numerical reconstruction

In this article, we investigate the determination of the spatial component in the time-dependent second order coefficient of a hyperbolic equation from both theoretical and numerical aspects. By the Carleman estimates for general hyperbolic operators and an auxiliary Carleman estimate, we establish local Hölder stability with both partial boundary and interior measurements under certain geometrical conditions. For numerical reconstruction, we minimize a Tikhonov functional which penalizes the gradient of the unknown function. Based on the resulting variational equation, we design an iteration method which is updated by solving a Poisson equation at each step. One-dimensional prototype examples illustrate the numerical performance of the proposed iteration.

math.AP↗

Evidence for compact binary systems around Kepler red giants

We present an analysis of 168 oscillating red giants from NASA's $Kepler$ mission that exhibit anomalous peaks in their Fourier amplitude spectra. These peaks result from ellipsoidal variations which are indicative of binary star systems, at frequencies such that the orbit of any stellar companion would be within the convective envelope of the red giant. Alternatively, the observed phenomenon may be due to a close binary orbiting a red giant in a triple system, or chance alignments of foreground or background binary systems contaminating the target pixel aperture. We identify 87 stars in the sample as chance alignments using a combination of pixel Fourier analysis and difference imaging. We find that in the remaining 81 cases the anomalous peaks are indistinguishable from the target star to within 4$''$, suggesting a physical association. We examine a Galaxia model of the $Kepler$ field of view to estimate background star counts and find that it is highly unlikely that all targets can be explained by chance alignments. From this, we conclude that these stars may comprise a population of physically associated systems.

astro-ph.SR↗

Asteroseismology of 1523 misclassified red giants using $\textit{Kepler}$ data

We analysed solar-like oscillations in 1523 $\textit{Kepler}$ red giants which have previously been misclassified as subgiants, with predicted $ν_{\rm max}$ values (based on the Kepler Input Catalogue) between 280$μ$Hz to 700$μ$Hz. We report the discovery of 626 new oscillating red giants in our sample, in addition to 897 oscillators that were previously characterized by Hekker et al. (2011) from one quarter of $\textit{Kepler}$ data. Our sample increases the known number of oscillating low-luminosity red giants by $26\%$ (up to $\sim$ 1900 stars). About three quarters of our sample are classified as ascending red-giant-branch stars, while the remainder are red-clump stars. A novel scheme was applied to determine $Δν$ for 108 stars with $ν_{\rm max}$ close to the Nyquist frequency (240$μ$Hz < $ν_{\rm max}$ < 320$μ$Hz). Additionally, we identified 47 stars oscillating in the super-Nyquist frequency regime, up to 387$μ$Hz, using long-cadence light curves. We show that the misclassifications are most likely due to large uncertainties in KIC surface gravities, and do not result from the absence of broadband colors or from different physical properties such as reddening, spatial distribution, mass or metallicity. The sample will be valuable to study oscillations in low-luminosity red giants and to characterize planet candidates around those stars.

astro-ph.SR↗

3D Wireless: Modeling Wireless Performance by Combining Spatial and Temporal Behaviors

Performance characterization is a fundamental issue in wireless networks for real time routing, wireless network simulation, and etc. There are four basic wireless operations that are required to be modeled, i.e., unicast, anycast, broadcast, and multicast. As observed in many recent works, the temporal and spatial distribution of packet receptions can have significant impact on wireless performance involving multiple links (anycast/broadcast/multicast). However, existing performance models and simulations overlook these two wireless behaviors, leading to biased performance estimation and simulation results. In this paper, we first explicitly identify the necessary "3-Dimension" information for wireless performance modeling, i.e., packet reception rate (PRR), PRR spatial distribution, and temporal distribution. We then propose a comprehensive modeling approach considering 3-Dimension Wireless information (called 3DW model). Further, we demonstrate the generality and wide applications of 3DW model by two case studies: 3DWbased network simulation and 3DW-based real time routing protocol. Extensive simulation and testbed experiments have been conducted. The results show that 3DW model achieves much more accurate performance estimation for both anycast and broadcast/multicast. 3DW-based simulation can effectively reserve the end-to-end performance metric of the input empirical traces. 3DW-based routing can select more efficient senders, achieving better transmission efficiency.

cs.NI↗

Exploring the sources of p-mode frequency shifts in the CoRoT target HD 49933

The oscillations of the solar-like star HD 49933 have been observed thoroughly by CoRot. Two dozens of frequency shifts, which are closely related with the change in magnetic activity, have been measured. To explore the effects of the magnetic activity on the frequency shifts, we calculate frequency shifts for the radial and $l = 1$ p-modes of HD 49933 with the general variational method, which evaluates the shifts using a spatial integral of the product of a kernel and some sources. The theoretical frequency shifts well reproduce the observation. The magnitudes and positions of the sources are determined according to the $χ^2$ criterion. We predict the source that contributes to both $l = 0$ and $l = 1$ modes is located at $0.48 - 0.62$Mm below the stellar surface. In addition, based on the assumption that $A_{0}$ is proportional to the change in the MgII activity index $Δ{i}_{MgII}$, we obtained that the change of MgII index between minimum and maximum of HD 49933 cycle period is about 0.665. The magnitude of the frequency shifts compared to the Sun already told us that HD 49933 is much more active than the Sun, which is further confirmed in this paper. Furthermore, our calculation on the frequency shifts of $l = 1$ modes indicates the variation of turbulent velocity in the stellar convective zone may be an important source for the $l = 1$ shifts.

astro-ph.SR↗

On measuring team stability in cooperative learning: An example of consecutive course projects on software engineering

Cooperative learning theory has shown that stable membership is a hallmark of effective work teams. According to relation strength and social network centrality, this paper proposes an approach to measure team stability reasons in consecutive cooperative learning. Taking consecutive course projects of software engineering in a university as examples, we examine the relation between team stability and learning performance in consecutive cooperative learning from two parts: learning score and learning satisfaction. Through empirical analysis, it arrives at the conclusion that learning score is in weak positive correlation with team stability. Through questionnaire and interviews, it finds out 78% of the students did not value the importance of team stability, and 67% of the teachers never recommend the students to keep stable teams. Finally, we put forward an expected correlation model of learning performance as future work and discuss instability as well.

cs.CY↗