arXiv Science⌕ Search

arXiv subjects

Jie Xu

Publications and source records attributed to Jie Xu.

630 records · Page 35Linked to original sources
arXiv2012

Liquid marbles as thermally robust droplets: coating-assisted Leidenfrost-like effect

The Leidenfrost effect-prolonged evaporation of droplets on a superheated surface-happens only when the surface temperature is above a certain transitional value. Here, we show that specially engineered droplets - liquid marbles - can exhibit similar effect at any superheated temperatures (up to 465 oC tested in our experiment) without a transition. Very possibly, this phenomenon is due to the fact that liquid marbles are droplets coated with microparticles and these microparticles help levitate the liquid core and maintain an insulation layer between the liquid and the superheated surface.

cond-mat.soft↗
arXiv2012

Simple graphene chemiresistors as pH sensors: fabrication and characterization

We report the fabrication and characterization of a simple gate-free graphene device as a pH sensor. The graphene sheets are made by mechanical exfoliation. Platinum contact electrodes are fabricated with a mask-free process using focused ion beam, and then expanded by silver paint. Annealing is used to improve the electrical contact. The experiment on the fabricated graphene device shows that the resistance of the device decreases linearly with increasing pH values (in the range of 4-10)in the surrounding liquid environment. The resolution achieved in our experiments is approximately 0.3 pH in alkali environment. The sensitivity of the device is calculated as approximately 2 kΩ/pH. The simple configuration, miniaturized size and the integration ability make graphene-based sensors promising candidates for future micro/nano applications.

cond-mat.mtrl-sci↗
arXiv2012

Energy Efficiency Optimization for MIMO Broadcast Channels

Characterizing the fundamental energy efficiency (EE) limits of MIMO broadcast channels (BC) is significant for the development of green wireless communications. We address the EE optimization problem for MIMO-BC in this paper and consider a practical power model, i.e., taking into account a transmit independent power which is related to the number of active transmit antennas. Under this setup, we propose a new optimization approach, in which the transmit covariance is optimized under fixed active transmit antenna sets, and then active transmit antenna selection (ATAS) is utilized. During the transmit covariance optimization, we propose a globally optimal energy efficient iterative water-filling scheme through solving a series of concave fractional programs based on the block-coordinate ascent algorithm. After that, ATAS is employed to determine the active transmit antenna set. Since activating more transmit antennas can achieve higher sum-rate but at the cost of larger transmit independent power consumption, there exists a tradeoff between the sum-rate gain and the power consumption. Here ATAS can exploit the best tradeoff and thus further improve the EE. Optimal exhaustive search and low-complexity norm based ATAS schemes are developed. Through simulations, we discuss the effect of different parameters on the EE of the MIMO-BC.

cs.IT↗
arXiv2012

An Energy Efficient Semi-static Power Control and Link Adaptation Scheme in UMTS HSDPA

High speed downlink packet access (HSDPA) has been successfully applied in commercial systems and improves user experience significantly. However, it incurs substantial energy consumption. In this paper, we address this issue by proposing a novel energy efficient semi-static power control and link adaptation scheme in HSDPA. Through estimating the EE under different modulation and coding schemes (MCSs) and corresponding transmit power, the proposed scheme can determine the most energy efficient MCS level and transmit power at the Node B. And then the Node B configure the optimal MCS level and transmit power. In order to decrease the signaling overhead caused by the configuration, a dual trigger mechanism is employed. After that, we extend the proposed scheme to the multiple input multiple output (MIMO) scenarios. Simulation results confirm the significant EE improvement of our proposed scheme. Finally, we give a discussion on the potential EE gain and challenge of the energy efficient mode switching between single input multiple output (SIMO) and MIMO configuration in HSDPA.

cs.IT↗
arXiv2012

Improving Energy Efficiency Through Multimode Transmission in the Downlink MIMO Systems

Adaptively adjusting system parameters including bandwidth, transmit power and mode to maximize the "Bits per-Joule" energy efficiency (BPJ-EE) in the downlink MIMO systems with imperfect channel state information at the transmitter (CSIT) is considered in this paper. By mode we refer to choice of transmission schemes i.e. singular value decomposition (SVD) or block diagonalization (BD), active transmit/receive antenna number and active user number. We derive optimal bandwidth and transmit power for each dedicated mode at first. During the derivation, accurate capacity estimation strategies are proposed to cope with the imperfect CSIT caused capacity prediction problem. Then, an ergodic capacity based mode switching strategy is proposed to further improve the BPJ-EE, which provides insights on the preferred mode under given scenarios. Mode switching compromises different power parts, exploits the tradeoff between the multiplexing gain and the imperfect CSIT caused inter-user interference, improves the BPJ-EE significantly.

cs.IT↗
arXiv2012

Energy Efficient Iterative Waterfilling for the MIMO Broadcasting Channels

Optimizing energy efficiency (EE) for the MIMO broadcasting channels (BC) is considered in this paper, where a practical power model is taken into account. Although the EE of the MIMO BC is non-concave, we reformulate it as a quasiconcave function based on the uplink-downlink duality. After that, an energy efficient iterative waterfilling scheme is proposed based on the block-coordinate ascent algorithm to obtain the optimal transmission policy efficiently, and the solution is proved to be convergent. Through simulations, we validate the efficiency of the proposed scheme and discuss the system parameters' effect on the EE.

cs.IT↗
arXiv2012

Energy Efficiency Scaling Law for MIMO Broadcasting Channels

This letter investigates the energy efficiency (EE) scaling law for the broadcasting channels (BC) with many users, in which the non-ideal transmit independent power consumption is taken into account. We first consider the single antenna case with $K$ users, and derive that the EE scales as $\frac{\log_2 \ln K}α$ when $α> 0$ and $\log_2 K$ when $α= 0$, where $α$ is the normalized transmit independent power. After that, we extend it to the general MIMO BC case with a $M$-antenna transmitter and $K$ users each with $N$ antennas. The scaling law becomes $\frac{M \log_2 \ln NK}α$ when $α> 0$ and $ \log_2 NK$ when $α= 0$.

cs.IT↗
arXiv2011

Improved Eavesdropping Detection in Quantum Key Distribution

Employing the fundamental laws of quantum physics, Quantum Key Distribution (QKD) promises the unconditionally secure distribution of cryptographic keys. However, in practical realisations, a QKD protocol is only secure, when the quantum bit error rate introduced by an eavesdropper unavoidably exceeds the system error rate. This condition guarantees that an eavesdropper cannot disguise his presence by simply replacing the original transmission line with a less faulty one. Unfortunately, this condition also limits the possible distance between the communicating parties, Alice and Bob, to a few hundred kilometers. To overcome this problem, we design a QKD protocol which allows Alice and Bob to distinguish system errors from eavesdropping errors. If they are able to identify the origin of their errors, they can detect eavesdropping even when the system error rate exceeds the eavesdropping error rate. To achieve this, the proposed protocol employs an alternative encoding of information in two-dimensional photon states. Errors manifest themselves as quantum bit and as index transmission errors with a distinct correlation between them in case of intercept-resend eavesdropping. As a result, Alice and Bob can tolerate lower eavesdropping and higher system error rates without compromising their privacy.

quant-ph↗
arXiv2011

Spin- and charge-density waves in the Hartree-Fock ground state of the two-dimensional Hubbard model

The ground states of the two-dimensional repulsive Hubbard model are studied within the unrestricted Hartree-Fock (UHF) theory. Magnetic and charge properties are determined by systematic, large-scale, exact numerical calculations, and quantified as a function of electron doping $h$. In the solution of the self-consistent UHF equations, multiple initial configurations and simulated annealing are used to facilitate convergence to the global minimum. New approaches are employed to minimize finite-size effects in order to reach the thermodynamic limit. At low to moderate interacting strengths and low doping, the UHF ground state is a linear spin-density wave (l-SDW), with antiferromagnetic order and a modulating wave. The wavelength of the modulating wave is $2/h$. Corresponding charge order exists but is substantially weaker than the spin order, hence holes are mobile. As the interaction is increased, the l-SDW states evolves into several different phases, with the holes eventually becoming localized. A simple pairing model is presented with analytic calculations for low interaction strength and small doping, to help understand the numerical results and provide a physical picture for the properties of the SDW ground state. By comparison with recent many-body calculations, it is shown that, for intermediate interactions, the UHF solution provides a good description of the magnetic correlations in the true ground state of the Hubbard model.

cond-mat.str-el↗
arXiv2010

Qubit Entanglement Dephasing Dynamics Driven by a Bath of Spins

We study the entanglement dynamics for a two-spin system coupled to a spin environment of different configurations by z-x type interaction. The models considered in this paper are solved both analytically and numerically giving rise to some concise analytical expressions when certain approximations are properly made. Our purpose is to find how the initial states of the environment with different numbers of spins affect the decay or revival of the entanglement between central qubits. In Particular, it is found that the block-entangled environment could speed up the decay and revival of the qubit entanglement. Our results exhibit some interesting features that have not been found for a boson bath.

quant-ph↗
arXiv2010

Do surfaces with mixed hydrophilic and hydrophobic areas enhance pool boiling?

We demonstrate that smooth and flat surfaces combining hydrophilic and hydrophobic patterns improve pool boiling performance. Compared to a hydrophilic surface with 7 degree wetting angle, the measured critical heat flux and heat transfer coefficients of the enhanced surfaces are up to respectively 65 and 100% higher. Different networks combining hydrophilic and hydrophobic regions are characterized. While all tested networks enhance the heat transfer coefficient, large enhancements of critical heat flux are typically found for hydrophilic networks featuring hydrophobic islands. Hydrophilic networks indeed are shown to prevent the formation of an insulating vapor layer.

physics.flu-dyn↗
arXiv2010

Use of a porous membrane for gas bubble removal in microfluidic channels: physical mechanisms and design criteria

We demonstrate and explain a simple and efficient way to remove gas bubbles from liquid-filled microchannels, by integrating a hydrophobic porous membrane on top of the microchannel. A prototype chip is manufactured in hard, transparent polymer with the ability to completely filter gas plugs out of a segmented flow at rates up to 7.4 microliter/s per mm2 of membrane area. The device involves a bubble generation section and a gas removal section. In the bubble generation section, a T-junction is used to generate a train of gas plugs into a water stream. These gas plugs are then transported towards the gas removal section, where they slide along a hydrophobic membrane until complete removal. The system has been successfully modeled and four necessary operating criteria have been determined to achieve a complete separation of the gas from the liquid. The first criterion is that the bubble length needs to be larger than the channel diameter. The second criterion is that the gas plug should stay on the membrane for a time sufficient to transport all the gas through the membrane. The third criterion is that the gas plug travel speed should be lower than a critical value: otherwise a stable liquid film between the bubble and the membrane prevents mass transfer. The fourth criterion is that the pressure difference across the membrane should not be larger than the Laplace pressure to prevent water from leaking through the membrane.

physics.flu-dyn↗
arXiv2009

Acoustic excitation of superharmonic capillary waves on a meniscus in a planar micro-geometry

The effects of ultrasound on the dynamics of an air-water meniscus in a planar micro-geometry are investigated experimentally. The sonicated meniscus exhibits harmonic traveling waves or standing waves, the latter corresponding to a higher ultrasound level. Standing capillary waves with subharmonic and superharmonic frequencies are also observed, and are explained in the framework of parametric resonance theory, using the Mathieu equation.

nlin.AO↗
arXiv2009

A bubble-powered micro-rotor: conception, manufacturing, assembly, and characterization

A steady fluid flow, called microstreaming, can be generated in the vicinity of a micro-bubble excited by ultrasound. In this article, we use this phenomenon to assemble and power a microfabricated rotor at rotation speeds as high as 625 rpm. The extractible power is estimated to be on the order of a few femtowatts. A first series of experiments with uncontrolled rotor shapes is presented, demonstrating the possibility of this novel actuation scheme. A second series of experiments with 65 micron rotors micromanufactured in SU-8 resin are presented. Variables controlling the rotation speed and rotor stability are investigated, such as the bubble diameter, the acoustic excitation frequency and amplitude, and the rotor geometry. Finally, an outlook is provided on developing this micro-rotor into a MEMS-based motor capable of delivering tunable, infinitesimal rotary power at the microscale.

physics.flu-dyn↗
arXiv2009

Control and ultrasonic actuation of a gas-liquid interface in a microfluidic chip

This article describes the design and manufacturing of a microfluidic chip, allowing for the actuation of a gas-liquid interface and of the neighboring fluid. A first way to control the interface motion is to apply a pressure difference across it. In this case, the efficiency of three different micro-geometries at anchoring the interface is compared. Also, the critical pressures needed to move the interface are measured and compared to theoretical result. A second way to control the interface motion is by ultrasonic excitation. When the excitation is weak, the interface exhibits traveling waves, which follow a dispersion equation. At stronger ultrasonic levels, standing waves appear on the interface, with frequencies that are half integer multiple of the excitation frequency. An associated microstreaming flow field observed in the vicinity of the interface is characterized. The meniscus and associated streaming flow have the potential to transport particles and mix reagents.

cond-mat.soft↗
arXiv2009

Drop on demand in a microfluidic chip

In this work, we introduce the novel technique of in-chip drop on demand, which consists in dispensing picoliter to nanoliter drops on demand directly in the liquid-filled channels of a polymer microfluidic chip, at frequencies up to 2.5 kHz and with precise volume control. The technique involves a PDMS chip with one or several microliter-size chambers driven by piezoelectric actuators. Individual aqueous microdrops are dispensed from the chamber to a main transport channel filled with an immiscible fluid, in a process analogous to atmospheric drop on demand dispensing. In this article, the drop formation process is characterized with respect to critical dispense parameters such as the shape and duration of the driving pulse, and the size of both the fluid chamber and the nozzle. Several features of the in-chip drop on demand technique with direct relevance to lab on a chip applications are presented and discussed, such as the precise control of the dispensed volume, the ability to merge drops of different reagents and the ability to move a drop from the shooting area of one nozzle to another for multi-step reactions. The possibility to drive the microfluidic chip with inexpensive audio electronics instead of research-grade equipment is also examined and verified. Finally, we show that the same piezoelectric technique can be used to generate a single gas bubble on demand in a microfluidic chip.

q-bio.QM↗