arXiv subjects

Jie Li

Publications and source records attributed to Jie Li.

At least 667 records · Page 37Linked to original sources

arXiv2018

Linear Coded Caching Scheme for Centralized Networks

Coded caching systems have been widely studied to reduce the data transmission during the peak traffic time. In practice, two important parameters of a coded caching system should be considered, i.e., the rate which is the maximum amount of the data transmission during the peak traffic time, and the subpacketization level, the number of divided packets of each file when we implement a coded caching scheme. We prefer to design a scheme with rate and packet number as small as possible since they reflect the transmission efficiency and complexity of the caching scheme, respectively. In this paper, we first characterize a coded caching scheme from the viewpoint of linear algebra and show that designing a linear coded caching scheme is equivalent to constructing three classes of matrices satisfying some rank conditions. Then based on the invariant linear subspaces and combinatorial design theory, several classes of new coded caching schemes over $\mathbb{F}_2$ are obtained by constructing these three classes of matrices. It turns out that the rate of our new rate is the same as the scheme construct by Yan et al. (IEEE Trans. Inf. Theory 63, 5821-5833, 2017), but the packet number is significantly reduced. A concatenating construction then is used for flexible number of users. Finally by means of these matrices, we show that the minimum storage regenerating codes can also be used to construct coded caching schemes.

cs.IT↗

arXiv2018

Channel-wise and Spatial Feature Modulation Network for Single Image Super-Resolution

The performance of single image super-resolution has achieved significant improvement by utilizing deep convolutional neural networks (CNNs). The features in deep CNN contain different types of information which make different contributions to image reconstruction. However, most CNN-based models lack discriminative ability for different types of information and deal with them equally, which results in the representational capacity of the models being limited. On the other hand, as the depth of neural networks grows, the long-term information coming from preceding layers is easy to be weaken or lost in late layers, which is adverse to super-resolving image. To capture more informative features and maintain long-term information for image super-resolution, we propose a channel-wise and spatial feature modulation (CSFM) network in which a sequence of feature-modulation memory (FMM) modules is cascaded with a densely connected structure to transform low-resolution features to high informative features. In each FMM module, we construct a set of channel-wise and spatial attention residual (CSAR) blocks and stack them in a chain structure to dynamically modulate multi-level features in a global-and-local manner. This feature modulation strategy enables the high contribution information to be enhanced and the redundant information to be suppressed. Meanwhile, for long-term information persistence, a gated fusion (GF) node is attached at the end of the FMM module to adaptively fuse hierarchical features and distill more effective information via the dense skip connections and the gating mechanism. Extensive quantitative and qualitative evaluations on benchmark datasets illustrate the superiority of our proposed method over the state-of-the-art methods.

cs.CV↗

arXiv2018

Spatial Variable Selection and An Application to Virginia Lyme Disease Emergence

Lyme disease is an infectious disease that is caused by a bacterium called Borrelia burgdorferi sensu stricto. In the United States, Lyme disease is one of the most common infectious diseases. The major endemic areas of the disease are New England, Mid-Atlantic, East-North Central, South Atlantic, and West North-Central. Virginia is on the front-line of the disease's diffusion from the northeast to the south. One of the research objectives for the infectious disease community is to identify environmental and economic variables that are associated with the emergence of Lyme disease. In this paper, we use a spatial Poisson regression model to link the spatial disease counts and environmental and economic variables, and develop a spatial variable selection procedure to effectively identify important factors by using an adaptive elastic net penalty. The proposed methods can automatically select important covariates, while adjusting for possible spatial correlations of disease counts. The performance of the proposed method is studied and compared with existing methods via a comprehensive simulation study. We apply the developed variable selection methods to the Virginia Lyme disease data and identify important variables that are new to the literature. Supplementary materials for this paper are available online.

stat.AP↗

arXiv2018

Restricting Greed in Training of Generative Adversarial Network

Generative adversarial network (GAN) has gotten wide re-search interest in the field of deep learning. Variations of GAN have achieved competitive results on specific tasks. However, the stability of training and diversity of generated instances are still worth studying further. Training of GAN can be thought of as a greedy procedure, in which the generative net tries to make the locally optimal choice (minimizing loss function of discriminator) in each iteration. Unfortunately, this often makes generated data resemble only a few modes of real data and rotate between modes. To alleviate these problems, we propose a novel training strategy to restrict greed in training of GAN. With help of our method, the generated samples can cover more instance modes with more stable training process. Evaluating our method on several representative datasets, we demonstrate superiority of improved training strategy on typical GAN models with different distance metrics.

cs.CV↗

arXiv2018

Spatial-Spectral Fusion by Combining Deep Learning and Variation Model

In the field of spatial-spectral fusion, the model-based method and the deep learning (DL)-based method are state-of-the-art. This paper presents a fusion method that incorporates the deep neural network into the model-based method for the most common case in the spatial-spectral fusion: PAN/multispectral (MS) fusion. Specifically, we first map the gradient of the high spatial resolution panchromatic image (HR-PAN) and the low spatial resolution multispectral image (LR-MS) to the gradient of the high spatial resolution multispectral image (HR-MS) via a deep residual convolutional neural network (CNN). Then we construct a fusion framework by the LR-MS image, the gradient prior learned from the gradient network, and the ideal fused image. Finally, an iterative optimization algorithm is used to solve the fusion model. Both quantitative and visual assessments on high-quality images from various sources demonstrate that the proposed fusion method is superior to all the mainstream algorithms included in the comparison in terms of overall fusion accuracy.

cs.CV↗

arXiv2018

A Generic Transformation to Enable Optimal Repair in MDS Codes for Distributed Storage Systems

We propose a generic transformation that can convert any nonbinary $(n=k+r,k)$ maximum distance separable (MDS) code into another $(n,k)$ MDS code over the same field such that 1) some arbitrarily chosen $r$ nodes have the optimal repair bandwidth and the optimal rebuilding access, 2) for the remaining $k$ nodes, the normalized repair bandwidth and the normalized rebuilding access (over the file size) are preserved, 3) the sub-packetization level is increased only by a factor of $r$. Two immediate applications of this generic transformation are then presented. The first application is that we can transform any nonbinary MDS code with the optimal repair bandwidth or the optimal rebuilding access for the systematic nodes only, into a new MDS code which possesses the corresponding repair optimality for all nodes. The second application is that by applying the transformation multiple times, any nonbinary $(n,k)$ scalar MDS code can be converted into an $(n,k)$ MDS code with the optimal repair bandwidth and the optimal rebuilding access for all nodes, or only a subset of nodes, whose sub-packetization level is also optimal.

cs.IT↗

arXiv2018

Hyperspectral Image Denoising Employing a Spatial-Spectral Deep Residual Convolutional Neural Network

Hyperspectral image (HSI) denoising is a crucial preprocessing procedure to improve the performance of the subsequent HSI interpretation and applications. In this paper, a novel deep learning-based method for this task is proposed, by learning a non-linear end-to-end mapping between the noisy and clean HSIs with a combined spatial-spectral deep convolutional neural network (HSID-CNN). Both the spatial and spectral information are simultaneously assigned to the proposed network. In addition, multi-scale feature extraction and multi-level feature representation are respectively employed to capture both the multi-scale spatial-spectral feature and fuse the feature representations with different levels for the final restoration. The simulated and real-data experiments demonstrate that the proposed HSID-CNN outperforms many of the mainstream methods in both the quantitative evaluation indexes, visual effects, and HSI classification accuracy.

cs.CV↗

arXiv2018

Bottom-up Pose Estimation of Multiple Person with Bounding Box Constraint

In this work, we propose a new method for multi-person pose estimation which combines the traditional bottom-up and the top-down methods. Specifically, we perform the network feed-forwarding in a bottom-up manner, and then parse the poses with bounding box constraints in a top-down manner. In contrast to the previous top-down methods, our method is robust to bounding box shift and tightness. We extract features from an original image by a residual network and train the network to learn both the confidence maps of joints and the connection relationships between joints. During testing, the predicted confidence maps, the connection relationships and the bounding boxes are used to parse the poses of all persons. The experimental results showed that our method learns more accurate human poses especially in challenging situations and gains better time performance, compared with the bottom-up and the top-down methods.

cs.CV↗

arXiv2018

Generation and detection of non-Gaussian phonon-added coherent states in optomechanical systems

Adding excitations on a coherent state provides an effective way to observe nonclassical properties of radiation fields. Here we describe and analyse how to apply this concept to the motional state of a mechanical oscillator and present a full scheme to prepare non-Gaussian {\it phonon}-added coherent states of the mechanical motion in cavity optomechanics. We first generate a mechanical coherent state using electromagnetically induced transparency. We then add a single phonon onto the coherent state via optomechanical parametric down-conversion combined with single photon detection. We validate this single-phonon-added coherent state by using a red-detuned beam and reading out the state of the optical output field. This approach allows us to verify nonclassical properties of the phonon state, such as sub-Poissonian character and quadrature squeezing. We further show that our scheme can be directly implemented using existing devices, and is generic in nature and hence applicable to a variety of systems in opto- and electromechanics.

quant-ph↗

arXiv2018

A survey of dimensionality reduction techniques based on random projection

Dimensionality reduction techniques play important roles in the analysis of big data. Traditional dimensionality reduction approaches, such as principal component analysis (PCA) and linear discriminant analysis (LDA), have been studied extensively in the past few decades. However, as the dimensionality of data increases, the computational cost of traditional dimensionality reduction methods grows exponentially, and the computation becomes prohibitively intractable. These drawbacks have triggered the development of random projection (RP) techniques, which map high-dimensional data onto a low-dimensional subspace with extremely reduced time cost. However, the RP transformation matrix is generated without considering the intrinsic structure of the original data and usually leads to relatively high distortion. Therefore, in recent years, methods based on RP have been proposed to address this problem. In this paper, we summarize the methods used in different situations to help practitioners to employ the proper techniques for their specific applications. Meanwhile, we enumerate the benefits and limitations of the various methods and provide further references for researchers to develop novel RP-based approaches.

cs.LG↗

arXiv2018

Gated Recurrent Unit Based Acoustic Modeling with Future Context

The use of future contextual information is typically shown to be helpful for acoustic modeling. However, for the recurrent neural network (RNN), it's not so easy to model the future temporal context effectively, meanwhile keep lower model latency. In this paper, we attempt to design a RNN acoustic model that being capable of utilizing the future context effectively and directly, with the model latency and computation cost as low as possible. The proposed model is based on the minimal gated recurrent unit (mGRU) with an input projection layer inserted in it. Two context modules, temporal encoding and temporal convolution, are specifically designed for this architecture to model the future context. Experimental results on the Switchboard task and an internal Mandarin ASR task show that, the proposed model performs much better than long short-term memory (LSTM) and mGRU models, whereas enables online decoding with a maximum latency of 170 ms. This model even outperforms a very strong baseline, TDNN-LSTM, with smaller model latency and almost half less parameters.

cs.CL↗

arXiv2018

Dynamic physical layer equalization in optical communication networks

In optical transport networks, signal lightpaths between two terminal nodes can be different due to current network conditions. Thus the transmission distance and accumulated dispersion in the lightpath cannot be predicted. Therefore, the adaptive compensation of dynamic dispersion is necessary in such networks to enable flexible routing and switching. In this paper, we present a detailed analysis on the adaptive dispersion compensation using the least-mean-square (LMS) algorithm in coherent optical communication networks. It is found that the variable-step-size LMS equalizer can achieve the same performance with a lower complexity, compared to the traditional LMS algorithm.

cs.IT↗

arXiv2018

Kepler Data Validation I -- Architecture, Diagnostic Tests, and Data Products for Vetting Transiting Planet Candidates

The Kepler Mission was designed to identify and characterize transiting planets in the Kepler Field of View and to determine their occurrence rates. Emphasis was placed on identification of Earth-size planets orbiting in the Habitable Zone of their host stars. Science data were acquired for a period of four years. Long-cadence data with 29.4 min sampling were obtained for ~200,000 individual stellar targets in at least one observing quarter in the primary Kepler Mission. Light curves for target stars are extracted in the Kepler Science Data Processing Pipeline, and are searched for transiting planet signatures. A Threshold Crossing Event is generated in the transit search for targets where the transit detection threshold is exceeded and transit consistency checks are satisfied. These targets are subjected to further scrutiny in the Data Validation (DV) component of the Pipeline. Transiting planet candidates are characterized in DV, and light curves are searched for additional planets after transit signatures are modeled and removed. A suite of diagnostic tests is performed on all candidates to aid in discrimination between genuine transiting planets and instrumental or astrophysical false positives. Data products are generated per target and planet candidate to document and display transiting planet model fit and diagnostic test results. These products are exported to the Exoplanet Archive at the NASA Exoplanet Science Institute, and are available to the community. We describe the DV architecture and diagnostic tests, and provide a brief overview of the data products. Transiting planet modeling and the search for multiple planets on individual targets are described in a companion paper. The final revision of the Kepler Pipeline code base is available to the general public through GitHub. The Kepler Pipeline has also been modified to support the TESS Mission which will commence in 2018.

astro-ph.EP↗

arXiv2018

Comment on "Piezoelectricity in planar boron nitride via a geometric phase"

Using the strain-dependent effective Hamiltonian and the geometric phase, Droth et al. [Phys. Rev. B 94, 075404 (2016)] obtain an analytical expression for the electronic contribution to the piezoelectricity of planar hexagonal boron nitride (h -BN). Their analytical results of piezoelectric constants for h -BN are invalid because of the mistakes in constructing the adiabatic process of the piezoelectricity. In this comment, we reconstruct a proper adiabatic process for piezoelectricity and formulate a general Berry phase expression for the piezoelectric coefficients of two-dimensional piezoelectric crystals by means of the modern theory of polarization. The corrected analytical results of the piezoelectric constants are in complete consistency with the first-principles calculations and hence manifest the validity and generality of the Berry phase expression of piezoelectric coefficients.

cond-mat.mes-hall↗

arXiv2018

Low energy range dielectronic recombination of Fluorine-like Fe17+ at the CSRm

The accuracy of dielectronic recombination (DR) data for astrophysics related ions plays a key role in astrophysical plasma modeling. The measurement of the absolute DR rate coefficient of Fe17+ ions was performed at the main cooler storage ring at Institute of Modern Physics, Lanzhou, China. The experimental electron-ion collision energy range covers first Rydberg series up to n = 24 for the DR resonances associated with the 2P1/2--2P3/2 dn = 0 core excitations. A theoretical calculation was performed by using FAC code and compared with the measured DR rate coefficient. Overall reasonable agreement was found between the experimental results and calculations. Moreover, plasma rate coefficient was deduced from the experimental DR rate coefficient and compared with the available results from the literature. At the low energy range significant discrepancies were found therein and the measured resonances challenged state-of-the-art theory at the low collision energies.

physics.atom-ph↗

arXiv2018

Tight-binding Piezoelectric Theory and Electromechanical Coupling Correlations for Transition Metal Dichalcogenide Monolayers

The lack of inversion symmetry in semiconducting transition metal dichalcogenide monolayers (TMDMs) enables a considerable molecular-level intrinsic piezoelectricity, which opens prospects for atomically-thin piezotronics and optoelectronics. Here, based on the tight-binding (TB) approach and Berry phase polarization theory, we establish an atomic-scale TB theory for demonstrating piezoelectric physics in TMDMs. Using the TB piezoelectric theory, we predict their electronic Grüneisen parameters (EGP) which measure the electron-phonon couplings. By virtue of the constructed analytical piezoelectric model, we further reveal the correlation between the electronic contribution to piezoelectric coefficients and strain-induced pseudomagnetic gauge field (PMF). These predicted EGP and PMF for TMDMs are experimentally testable, and hence the TB piezoelectric model is an alternative theoretical framework for calculating electron-phonon interactions and PMF.

cond-mat.mes-hall↗

arXiv2018

FDRC: Flow-Driven Rule Caching Optimization in Software Defined Networking

With the sharp growth of cloud services and their possible combinations, the scale of data center network traffic has an inevitable explosive increasing in recent years. Software defined network (SDN) provides a scalable and flexible structure to simplify network traffic management. It has been shown that Ternary Content Addressable Memory (TCAM) management plays an important role on the performance of SDN. However, previous literatures, in point of view on rule placement strategies, are still insufficient to provide high scalability for processing large flow sets with a limited TCAM size. So caching is a brand new method for TCAM management which can provide better performance than rule placement. In this paper, we propose FDRC, an efficient flow-driven rule caching algorithm to optimize the cache replacement in SDN-based networks. Different from the previous packet-driven caching algorithm, FDRC is characterized by trying to deal with the challenges of limited cache size constraint and unpredictable flows. In particular, we design a caching algorithm with low-complexity to achieve high cache hit ratio by prefetching and special replacement strategy for predictable and unpredictable flows, respectively. By conducting extensive simulations, we demonstrate that our proposed caching algorithm significantly outperforms FIFO and least recently used (LRU) algorithms under various network settings.

cs.DC↗

arXiv2018

Planetary Candidates Observed by Kepler. VIII. A Fully Automated Catalog With Measured Completeness and Reliability Based on Data Release 25

We present the Kepler Object of Interest (KOI) catalog of transiting exoplanets based on searching four years of Kepler time series photometry (Data Release 25, Q1-Q17). The catalog contains 8054 KOIs of which 4034 are planet candidates with periods between 0.25 and 632 days. Of these candidates, 219 are new and include two in multi-planet systems (KOI-82.06 and KOI-2926.05), and ten high-reliability, terrestrial-size, habitable zone candidates. This catalog was created using a tool called the Robovetter which automatically vets the DR25 Threshold Crossing Events (TCEs, Twicken et al. 2016). The Robovetter also vetted simulated data sets and measured how well it was able to separate TCEs caused by noise from those caused by low signal-to-noise transits. We discusses the Robovetter and the metrics it uses to sort TCEs. For orbital periods less than 100 days the Robovetter completeness (the fraction of simulated transits that are determined to be planet candidates) across all observed stars is greater than 85%. For the same period range, the catalog reliability (the fraction of candidates that are not due to instrumental or stellar noise) is greater than 98%. However, for low signal-to-noise candidates between 200 and 500 days around FGK dwarf stars, the Robovetter is 76.7% complete and the catalog is 50.5% reliable. The KOI catalog, the transit fits and all of the simulated data used to characterize this catalog are available at the NASA Exoplanet Archive.

astro-ph.EP↗