arXiv Science⌕ Search

arXiv subjects

Jiaxing Li

Publications and source records attributed to Jiaxing Li.

At least 19 recordsLinked to original sources
arXiv2026

Attn-Forcing: Learning Full-Context Attention Proxies for Streaming Video Generation

Increasing the attention context length significantly improves streaming video generation quality, while incurring prohibitive memory and computational costs as the context grows. Existing methods attempt to capture this contextual information through attention selection or compression, but remain limited by bounded representations and lack explicit attention-level supervision to retain historical contributions to current queries. To address this, we introduce Attn-Forcing, a novel framework that preserves full-context attention contributions for streaming video generation under bounded memory and computation. We achieve this by introducing attention proxies that continuously approximate the attention responses induced by the historical context. Specifically, we implement the proxies as learnable visual latents and employ a Proxy Update Module to incorporate visual context from historical latents. Moreover, we propose an Attention Matching Loss to explicitly constrain the attention behavior of the learned proxies using full-context attention supervision. Extensive qualitative and quantitative experiments demonstrate that Attn-Forcing consistently improves streaming video generation quality and achieves state-of-the-art performance over existing baseline methods.

cs.CV↗
arXiv2026

Risk Decomposition for Hallucination-Aware Video Sampling

Despite achieving high visual fidelity, video models still suffer from physical hallucinations, limiting their reliability as world simulators. Existing methods leverage model-internal or external signals to improve physical plausibility, but their roles and limitations require a unified explanation. We propose a two-dimensional physical-hallucination risk framework that defines low-density sampling risk and high-density drifting risk. The first risk captures generations assigned low likelihood by the video model, for example, a ball suddenly teleporting despite the model favoring continuous motion, while the second risk captures physical inconsistencies in high-likelihood generations, for example, a ball bouncing progressively higher without additional energy. Our analysis explains how model-internal signals steer sampling toward higher-density regions of the learned distribution to address low-density sampling risk. However, higher model likelihood does not guarantee physical plausibility, motivating external guidance to address high-density drifting risk. Based on this framework, we develop Hallucination-Aware Sampler (HA-Sampler), which applies external physical guidance within latent refinement to generate physically plausible videos, and HA-Scorer, which derives a likelihood-based signal from the generator itself for evaluating generated videos using continuous normalizing flow (CNF), with coarse ODE integration and finite-difference divergence estimates. Experiments on Physics-IQ and VideoPhy benchmarks support our theoretical analysis and demonstrate that our methods outperform the compared sampling and scoring SOTA baselines.

cs.CV↗
arXiv2026

Frozen in a Frame: The Velocity Blind Spot in JEPA World Models

Joint-embedding predictive architectures (JEPAs) for world modeling train an encoder so a predictor maps a current embedding and action to the next frame's embedding, always from a single rendered frame. This has a structural blind spot: a renderer without motion blur draws a scene from configuration alone, so a single-frame embedding carries no velocity information, for any encoder, including the official released LeWM weights. We confirm this on official checkpoints across four real benchmarks (PushT, Reacher, Cube, TwoRoom): every linear velocity probe sits at or below chance while position probes reach R^2 about 0.95. We introduce RateIdent, a three-stage diagnostic protocol, and TI-JEPA, a lightweight fix splitting the latent into a pose code and an explicit finite-difference motion code, predicted jointly. Across three physically grounded environments, TI-JEPA gives a significant, seed-robust gain on a stop-at-goal planning task over a matched-memory baseline, e.g. 55% lower final distance on Pendulum (p=3.2x10^-10) and 64% on CartPole (p=5.1x10^-15). We reproduce this at official ViT-Tiny plus AdaLN-transformer scale, then push the same recipe onto real dm_control Reacher photographs trained from scratch, where TI-JEPA's branch separation exceeds the memory-having baseline's by roughly 38x, the paper's largest margin. Against a same-footprint recurrent RSSM-style predictor, TI-JEPA matches or beats its rollout accuracy on two of three environments, stays separately probeable for pose and motion, and wins outright on the most coupled one. A checkable formal argument and six evaluated environments show single-frame targets are the wrong object to predict when velocity matters, and a small, interpretable structural change fixes it with no privileged supervision. Code, checkpoints, and the project page are linked below the title.

cs.CV↗
arXiv2026

Beyond Localization: A Comprehensive Benchmark of Perspective-Conditioned Spatial Reasoning in MLLMs from Omnidirectional Images

Multimodal Large Language Models (MLLMs) show strong visual perception, yet remain limited in reasoning about space under changing viewpoints. We study this challenge as Perspective-Conditioned Spatial Reasoning (PCSR) in 360 degree omnidirectional images, where broad scene coverage reduces ambiguity from partial observations without eliminating the need for viewpoint-dependent inference. To assess this capability, we introduce PCSR-Bench, a diagnostic benchmark of 84,373 QA pairs from 2,600 omnidirectional images across 26 indoor environments, organized into eight tasks under three cognitive groups--- Perception, Spatial, and advanced PCSR. We evaluate 14 representative MLLMs and observe a substantial perception--reasoning gap: accuracy reaches 57.59% on Limited Field-of-View Reasoning (T7) but drops to 13.49%, 7.13%, and 0.64% on Relative Direction (T2), Egocentric Rotation (T4), and open-ended Compositional Directional Chains (T3), respectively. To probe the plasticity of this gap, we conduct an RL-based diagnostic study on a 7B-scale model. Reward shaping improves a matched 7B baseline from 31.10% to 60.06% under a controlled setting, suggesting that PCSR exhibits partial plasticity rather than being fully immutable. Still, these gains are task-selective, sensitive to reward design, and partially dependent on the evaluation protocol. These results position PCSR as a key bottleneck in current MLLMs and highlight meaningful yet bounded room for recovery under targeted optimization. Details and access are available at https://github.com/Caleb-ychen/PCSR-Benchmark.

cs.CV↗
arXiv2026

ATM: Why Latent World Models Can Fail to Plan

Latent world models can achieve accurate latent prediction yet still differ substantially in downstream planning performance. We argue that a key source of this discrepancy lies in the structure of action-induced latent transitions. We formalize action-identifiability through Bayes inverse risk, characterizing how much uncertainty about an action remains after observing the transition it induces. Model-predicted transitions can become highly self-decodable while encoding a domain-specific action relationship that fails to transfer to real environment transitions. We characterize this mismatch through cross-domain inverse transfer, instantiated as the Action-Consistency Transfer Matrix (ATM), a $2\times2$ inverse-risk matrix over real and predicted transition domains. Across TwoRoom, PushT, and OGBench-Cube, true-transition action-identifiability tracks downstream planning substantially better than standard prediction loss, while the full ATM reveals highly self-decodable yet cross-domain-inconsistent predicted transitions. Controlled interventions on the two domains further produce distinct transition structures and planning outcomes, supporting this decomposition. The same diagnostics also support lightweight model screening, reaching 98.81\% pairwise ranking accuracy for candidates separated by more than 5\% success.

cs.CV↗
arXiv2026

Effective Does Not Mean Useful: Conditional Functional Substitutability for Redundancy and Scaling in Transformers

Modern neural networks scale predictably, yet the mechanisms behind these regularities remain unclear. Neural redundancy is typically characterized by component importance or representational similarity, both indirect proxies. We view redundancy as an input-conditioned, dynamic relation: intermediate computational states are functionally redundant when they induce similar downstream responses. We introduce Conditional Functional Substitutability (CFS) to directly characterize such functional substitution. CFS exposes functional relations and reduction potential missed by conventional importance- and similarity-based measures. Across modalities and Transformer families, CFS reveals systematic functional reorganization with scale. Controlled scaling further shows that performance gains need not track growth in substitutability, while fixed-capacity models with more independent functional structure perform better, providing a functional account of diminishing returns. Predicted CFS further enables dynamic computation with a better performance--computation trade-off than importance-based component selection, suggesting new directions for redundancy-aware computation and more efficient model scaling.

cs.AI↗
arXiv2026

Matrix-Game 3.0: Real-Time and Streaming Interactive World Model with Long-Horizon Memory

With the advancement of interactive video generation, diffusion models have increasingly demonstrated their potential as world models. However, existing approaches still struggle to simultaneously achieve memory-enabled long-term temporal consistency and high-resolution real-time generation, limiting their applicability in real-world scenarios. To address this, we present Matrix-Game 3.0, a memory-augmented interactive world model designed for 720p real-time longform video generation. Building upon Matrix-Game 2.0, we introduce systematic improvements across data, model, and inference. First, we develop an upgraded industrial-scale infinite data engine that integrates Unreal Engine-based synthetic data, large-scale automated collection from AAA games, and real-world video augmentation to produce high-quality Video-Pose-Action-Prompt quadruplet data at scale. Second, we propose a training framework for long-horizon consistency: by modeling prediction residuals and re-injecting imperfect generated frames during training, the base model learns self-correction; meanwhile, camera-aware memory retrieval and injection enable the base model to achieve long horizon spatiotemporal consistency. Third, we design a multi-segment autoregressive distillation strategy based on Distribution Matching Distillation (DMD), combined with model quantization and VAE decoder pruning, to achieve efficient real-time inference. Experimental results show that Matrix-Game 3.0 achieves up to 40 FPS real-time generation at 720p resolution with a 5B model, while maintaining stable memory consistency over minute-long sequences. Scaling up to a 2x14B model further improves generation quality, dynamics, and generalization. Our approach provides a practical pathway toward industrial-scale deployable world models.

cs.CV↗
arXiv2026

AuthorityLens: Rethinking LLM-Based Agent Systems Through the Lens of Authority

LLM-based agents are increasingly deployed with authority over consequential resources and decisions in real systems. These agents often operate alongside human and LLM-based participants who hold different forms of authority. Yet workflow roles, permission settings, and review mechanisms do not necessarily reflect the authority realized in practice. We introduce AuthorityLens, a framework for measuring a system's authority structure. Starting from an authority portfolio, we evaluate a system along three dimensions: what the system is authorized to do (System Authority), how much joint participation is required to exercise that authority (Authority Separation), and how much authority each participant holds (Principal Authority). We derive these measurements from the minimal combinations of participants sufficient to realize each outcome across admissible runtime states. We apply AuthorityLens to Codex, OpenCode, and Gemini CLI across 13 operating configurations over a common portfolio of agent operations. We find that nominal configurations do not map cleanly onto realized authority. In Codex, Full Access changes System Authority only marginally while substantially concentrating authority in the executing Assistant. OpenCode's Build and Plan configurations have the same System Authority and Authority Separation despite different workflows and root-level permissions. In Gemini CLI, model-based review increases Authority Separation without changing System Authority. Principal Authority further distinguishes authority replication from authority separation: spawned or delegated agents can become alternative holders of the same authority without increasing the required joint participation. Together, these results demonstrate that AuthorityLens provides a unified framework for measuring and comparing realized authority structures across agent systems.

cs.AI↗
arXiv2026

Learning from Failures: Heterogeneous Graph Memory for Small Language Model Tool-Using Agents

Small and medium-sized language models offer cost-effective executors for tool-using agents, making them attractive for local and large-scale deployment. However, in long-horizon and stateful environments, they often make structural errors such as missing required observations, performing premature writes, repeating failed calls, and violating action preconditions. These errors can lead to incorrect state updates, policy violations, and costly or irreversible consequences, making reliable tool execution a critical deployment challenge. Existing fine-tuning approaches require substantial data and computation, while flat memory may retrieve failed actions without preserving their causal context or safety conditions. In this paper, we propose FRESH, a Failure-aware Retrieval framework over Experience-Structured Heterogeneous graphs, which transforms historical successes and failures into structured external experience for tool-using agents. By explicitly modeling the dependencies among tasks, actions, errors, repairs, and execution conditions, FRESH helps frozen language models reuse reliable strategies, avoid recurring failures, and make safer decisions in stateful tool interactions. Experiments on $τ$-Bench and AppWorld with multiple open-source models show that FRESH consistently improves task success and tool-use reliability over no-memory agents and representative memory-based baselines.

cs.LG↗
arXiv2026

Learning Energy-Efficient Air--Ground Actuation for Hybrid Robots on Stair-Like Terrain

Hybrid aerial--ground robots can use thrust to cross obstacles that impede wheel-driven motion, but deciding how much thrust to apply during contact remains challenging. We present an energy-aware reinforcement learning framework that jointly commands wheels, tilt servos and propellers through a single continuous policy, without prescribing locomotion modes. Hardware-calibrated power models penalise estimated electrical energy, while a terrain curriculum and a terminal reward for upright, settled arrivals support learning of thrust-assisted climbing. In simulation, continuous thrust allocation improves single-step clearance over fixed-thrust and mode-switching baselines as steps become taller. At the wheel-radius step height, it draws approximately 27 percent less mean power than the best fixed allocation. An energy-weight ablation shows the accompanying trade-off between efficiency and reliability. On a physical DoubleBee prototype, the unchanged network with a deployment interface clears two 6 centimetre steps in 8 of 10 trials. Additional hardware tests show both the potential for transfer to different terrain geometries and the remaining limitations in heading control, contact robustness and recovery.

cs.RO↗
arXiv2026

GEAR: From Dynamic Encoding to Dynamic Activation in Social Trajectory Prediction

Human trajectory prediction requires modeling both individual motion patterns and social interactions among agents. Existing methods have made substantial progress by using attention mechanisms, graph structures, and temporal encoders to capture dynamic social context. However, most of them primarily focus on how social information is encoded, while paying less explicit attention to how the encoded social context should take effect during future trajectory generation. In this paper, we argue that dynamic social encoding does not necessarily imply dynamic social activation. The same interaction context may require different activation strengths across future horizons and scene densities: social cues should be strengthened when interaction evidence is strong, but suppressed when they are weak or noisy. To address this issue, we propose GEAR, a generation-aware bias activation model for human trajectory prediction. Built upon a bias-decomposed trajectory generation formulation, GEAR dynamically activates the individual-motion and social-resonance bias terms at each future step before final trajectory composition. This allows the model to explicitly control when and how strongly individual and social bias components participate in generation. Experiments on ETH-UCY, SDD, and NBA show that GEAR consistently improves the resonance-based baseline and achieves competitive state-of-the-art performance. Further analyses of activation patterns and density-grouped errors validate the importance of calibrating encoded social context during trajectory generation. Our code is available at https://github.com/11isnotavailable/GEAR.git.

cs.CV↗
arXiv2026

Global convergence of an efficient splitting method for the defocusing Gross--Pitaevskii ground state problem

For computing the ground state of the defocusing Gross--Pitaevskii energy, we propose and analyze two efficient schemes based on the Davis--Yin three-operator splitting, which treats the potential and interaction terms explicitly, and the kinetic energy by a resolvent. One iteration costs one inversion of $I-γΔ$ for the first scheme, and of $I-γΔ+γV_1$ for the second, with $V_1$ denoting the separable part of the potential, and on structured meshes both operators can be inverted by simple fast GPU solvers. For monotone discrete Laplacians, including the second-order finite difference scheme and the lumped linear finite element method on simplicial meshes with suitable angle conditions, we prove global convergence to the unique positive discrete ground state, for every positive normalized initial vector, for any constant step size below an explicit threshold. In contrast, the methods previously proven to converge globally to the ground state all invert a more difficult elliptic operator that depends on the iteration variable. In three-dimensional tests with up to $999^3$ unknowns on one GPU, a simple variable step size rule makes the proposed splitting schemes efficient in practice, comparable in wall-clock time to Riemannian conjugate gradient methods that also invert only a shifted Laplacian operator, and much more robust with respect to the choice of the initial guess.

math.NA↗
arXiv2026

OctoPipe: Reducing Pipeline Bubbles for Heterogeneous Models via Co-Optimizing Partitioning, Placement, and Scheduling

Pipeline parallelism is widely used to train large language models (LLMs). However, increasing heterogeneity in model architectures exacerbates pipeline bubbles, thereby reducing training efficiency. Prior approaches typically optimize a single phase of the pipeline schedule (i.e., partitioning, placement, or scheduling), leaving substantial pipeline bubbles. While promising, co-optimization poses three key challenges: (1) complex performance modeling, (2) a combinatorial search space, and (3) irregular execution orders. To address these challenges, we propose OctoPipe, a pipeline parallelism system to jointly optimize partitioning, placement, and scheduling. First, we build a graph-based pipeline simulator to model heterogeneous pipeline execution for co-optimization. Second, on top of the simulator, we develop an iterative bubble-aware tuner to efficiently explore the combinatorial search space. Third, we implement a unified pipeline executor that dynamically orchestrates computation and communication to support irregular execution orders without deadlocks while maximizing communication-computation overlap. Experiments show that OctoPipe achieves 1.09--1.49$\times$ throughput improvement over the state-of-the-art pipeline parallelism approaches across various heterogeneous model configurations and GPU cluster scales.

cs.DC↗
arXiv2026

MegaStyle++: Scaling Image Style Space through Hierarchical Style Definition

Image style is a highly abstract, human-constructed concept shaped by a range of visual factors and intrinsically entangled with content, yet a unified and explicit definition of image style remains lacking. In this work, we first discuss the fundamental question of what is style and then propose a hierarchical style definition that describes image style from an overall style identity to fine-grained visual attributes, providing a more structured, transferable, and interpretable style representation. Based on this definition, we refine the style annotation pipeline of MegaStyle and construct MegaStyle++-8M, a large-scale style dataset containing 150K overall style identities, 1M fine-grained style prompts, and 8M stylized images. Extensive analyses demonstrate that our hierarchical definition substantially expands the style space in both diversity and semantic breadth, while precisely capturing intrinsic visual style of reference images. The dataset and code will be updated at https://github.com/Tencent/MegaStyle, we hope MegaStyle++ provides a scalable foundation for studying and modeling diverse image styles.

cs.CV↗
arXiv2026

Matrix-Game 3.5: Enhancing Real-Time Streaming Interactive World Models with Patch Memory

Interactive world models extend video generation from offline clip synthesis toward persistent simulation of interactive virtual worlds, enabling applications in games, robotics, embodied agents, and XR. Achieving stable long-horizon interactive generation, however, remains challenging, as the model must simultaneously preserve scene geometry, dynamic consistency, and camera control while supporting real-time autoregressive generation. Building upon Matrix-Game 3.0, we present Matrix-Game 3.5, as shown in Figure 1, which advances real-time interactive world generation toward geometry-aware and long-horizon consistent simulation through three key improvements. First, we propose a unified geometry-aware memory framework, whose patch-memory and tiled-PRoPE components introduce no additional learnable parameters, combining explicit 3D patch retrieval with projective camera conditioning to enable geometry-consistent camera control and faithful long-horizon scene recall. Second, we introduce a static-dynamic disentangled world representation that separately models static scene geometry and dynamic subjects, preserving both geometric consistency and subject identity throughout long-horizon generation. Third, we develop a two-stage progressive real-time distillation framework that converts a bidirectional diffusion model into a few-step causal generator through Perceptual Flow Matching and curriculum based Self-Rollout DMD, enabling minute-long real-time interactive generation. Extensive experiments demonstrate that, with a unified training corpus spanning Unreal simulation environments, open-world games, and internet videos, MatrixGame 3.5 achieves strong performance in long-horizon scene recall, precise camera control, subject consistency, prompt-driven world generation, and stable real-time open-world interaction.

cs.CV↗
arXiv2026

A Unified Framework for Trajectory Prediction with Explicit Planning and Reaction Decomposition

Trajectory prediction has shifted toward structured formulations with explicit social modeling. However, existing methods inadequately distinguish the functional roles of social influence in trajectory planning. Observing that agents typically form motion plans by anticipating others' future behaviors before making local reactive adjustments, we identify social interactions as playing staged roles, namely planning precedes reaction. We propose INTraJ, a unified framework that decomposes social influence into two stages: a planning stage constructs reference trajectories using future social information, and a reaction stage recovers local adjustments from the residual between full-context prediction and the reference. INTraJ supports both multi-target and single-target paradigms. Extensive experiments on four standard benchmarks, including Argoverse 2, Argoverse 2-ped, ETH/UCY, and SDD, demonstrate consistent improvements, particularly in FDE and long-horizon consistency, with state-of-the-art performance achieved in several settings. INTraJ reframes trajectory prediction as a planning-driven two-stage process, validating that staged social modeling is critical for stable predictions. The code is publicly available at https://github.com/11isnotavailable/INTraJ.

cs.AI↗
arXiv2026

NodeJEPA: Structure-Conditioned Latent Prediction for Node-Level Graph Self-Supervised Learning

Self-supervised learning on graphs is largely shaped by contrastive methods that depend on carefully designed augmentations, and by generative methods that reconstruct node attributes in the input space. Both paradigms can entangle representations with low-level input statistics rather than with relational structure. Joint-embedding predictive architectures (JEPA) instead learn by predicting latent targets rather than reconstructing inputs. Recent work has explored this idea for graph-level representation learning, but how to design JEPA-style objectives for node-level tasks, and which structural signals the predictor should condition on, remains less clear. We present NodeJEPA, a joint-embedding predictive architecture for node-level graph self-supervised learning. NodeJEPA masks structure-aware k-hop ego-subgraphs and trains a context encoder to predict the latent representations of the masked nodes. These targets come from an EMA-updated target encoder with stop-gradient. A structure-conditioned predictor integrates spectral and centrality descriptors through cross-attention. Variance, covariance, and Laplacian spectral regularizers help stabilize the embedding geometry, and an optional curriculum gradually increases masking difficulty during training. Because prediction occurs in latent space, NodeJEPA does not rely on input reconstruction or hand-crafted graph augmentations. We evaluate NodeJEPA on standard node classification benchmarks under linear probing and fine-tuning protocols, and conduct ablations on masking, prediction, and regularization design choices. Our study offers a practical recipe for node-level JEPA-style latent prediction on graphs, and clarifies when structural conditioning helps representation learning. Code, configurations, and evaluation scripts are publicly available at https://github.com/OliverZ-dot/Node-Jepa.

cs.LG↗
arXiv2026

From Cloud to Crowd: Democratizing LLM Service with Decentralized Edge Collaboration for RAG

The rapid advancement of large language models (LLMs) has increased demand for scalable and cost-effective deployment, especially for mobile and edge devices. Cloud-hosted LLMs are powerful but expensive and difficult to scale due to vendor lock-in and high resource needs, resulting in high expenses and unstable performance under load. Recent efforts focus on deploying small language models (SLMs), distilled or pruned from LLMs, on resource-constrained edge devices to reduce costs and improve scalability. However, edge-based SLMs face limited knowledge coverage and notable accuracy gap compared to cloud-based LLMs. To address this, we present DEFRAG, a decentralized edge collaboration system for retrieval-augmented generation (RAG) that optimizes both retrieval and generation across heterogeneous edge devices. For retrieval, DEFRAG compresses and shares knowledge graphs, using hybrid retrieval to expand knowledge coverage. For generation, DEFRAG introduces an optimizer that adaptively selects SLMs and RAG parameters per query, balancing accuracy and cost. We implement DEFRAG on a heterogeneous edge testbed and evaluate it on benchmark QA datasets. We also test it under mobile route stress, non-uniform data placement, and a domain-specific QA workload. The results show that DEFRAG maintains stable service quality and cost efficiency under these broader settings. Results show that DEFRAG narrows the SLM-LLM accuracy gap, while reducing cost by up to 98.4% and increasing peak throughput by up to 97.8% over centralized services. These findings demonstrate the potential of DEFRAG for democratized LLM services at the edge.

cs.DC↗