arXiv subjects

Jiao Lin

Publications and source records attributed to Jiao Lin.

10 recordsLinked to original sources

arXiv2023

Mitigating Phase Errors to Improve Signal Quality in RIS-Assisted Satellite Communications

This research presents an advanced framework designed to enhance the received power in satellite-to-Earth communications by utilizing Reconfigurable Intelligent Surfaces (RIS) and focuses on mitigating phase errors arising from hardware imperfections associated with RIS systems. A comprehensive analysis of the phase errors arising from these imperfections is conducted, leading to the development of a robust analytical model that quantitatively incorporates these errors into the assessment of received power evaluations. Subsequently, we propose a methodology to selectively exclude RIS elements that are prone to errors, thereby improving the phase alignment of the received signal and enhancing overall system efficiency. While this strategy leads to a marginal decrease in received power, Bayesian Optimization (BO) is employed to optimize the RIS configuration, maintaining the desired power levels and ensuring signal integrity. The research also delves into the complexities introduced by shadowing effects combined with phase errors. To address these compounded challenges, a decision-making framework utilizing targeted BO is introduced to dynamically optimize RIS configurations, thereby enhancing system robustness and performance under adverse operational conditions. Numerical simulations validate the framework's efficacy in adaptively managing RIS elements, ensuring robust signal integrity and improved reception despite variations stemming from environmental and hardware factors. By addressing critical challenges in RIS-augmented satellite communications, this work highlights the transformative potential of adaptive optimization strategies in advancing the reliability and efficiency of next-generation wireless networks.

eess.SP↗

arXiv2018

Effects of Fano resonance on optical chirality of planar plasmonic nanodevices

The effects of Fano resonance on the optical chirality of planar plasmonic nanodevices in the visible wavelength range are experimentally observed and theoretically explained. The nanodevice consists of a nanodisk at the center with six gold nanorods with an orientation angle to exhibit optical chirality under dark-field illumination. The chiral response induced by the gold nanorods are affected by the presence of the nanodisk with different diameters which causes Fano resonance. An intriguing change to the opposite selection preference of different handedness of the circularly polarized light has been clearly observed experimentally. This change of the preference is understood based on the extended coupled oscillator model. Moreover, electrostatic analysis and the time-dependent simulations provide a further understanding of the phenomenon. The observed and understood effects of Fano resonance on optical chirality enables effective manipulation of chiral characteristics of planar subwavelength nanodevices.

physics.optics↗

arXiv2017

Optical chirality from dark-field illumination of planar plasmonic nanostructures

Dark-field illumination is shown to make planar chiral nanoparticle arrangements exhibit circular dichroism in extinction analogous to true chiral scatterers. Circular dichrosim is experimentally observed at the maximum scattering of single oligomers consisting rotationally symmetric arrangements of gold nanorods, with strong agreement to numerical simulation. A dipole model is developed to show that this effect is caused by a difference in the geometric projection of a nanorod onto the handed orientation of electric fields created by a circularly polarized dark-field that is normally incident on a glass substrate. Owing to this geometric origin, the wavelength of the peak chiral response is also experimentally shown to shift depending on the separation between nanoparticles. All presented oligomers have physical dimensions less than the operating wavelength, and the applicable extension to closely packed planar arrays of oligomers is demonstrated to amplify the magnitude of circular dichroism. The realization of strong chirality in these oligomers demonstrates a new path to engineer optical chirality from planar devices using dark-field illumination.

physics.optics↗

arXiv2017

Plasmonic edge states: an electrostatic eigenmode description

We consider periodic arrangements of metal nanostructures and study the effect of periodicity on the localised surface plasmon resonance of the structures within an electrostatic eigenmode approximation. We show that within this limit, the collective surface plasmon resonances of the periodic structures can be expressed in terms of superpositions of the eigenmodes of uncoupled nanostructures that exhibit a standing--wave character delocalised across the entire periodic structure. The formalism derived successfully enables the design and accounts for the observation of plasmonic edge-states in periodic structures.

physics.optics↗

arXiv2017

Label-free three-dimensional (3D) structural imaging in live cells using intrinsic optical refractive index

Here we report a method for visualization of volumetric structural information of live biological samples with no exogenous contrast agents. The process is made possible through a technique that involves generation, synthesis and analysis of three-dimensional (3D) Fourier components of light diffracted by the sample. This leads to the direct recovery of quantitative cellular morphology with no iterative procedures for reduced computational complexity. Combing with the fact that the technique is easily adaptive to any imaging platform and requires minimum sample preparation, our proposed method is particularly promising for observing fast, volumetric and dynamic events previously only accessible through staining methods.

q-bio.QM↗

arXiv2017

Active sorting of orbital angular momentum states of light with cascaded tunable resonators

Light carrying orbital angular momentum (OAM) has been shown to be of use in a disparate range of fields ranging from astronomy to optical trapping, and as a promising new dimension for multiplexing signals in optical communications and data storage. A challenge to many of these applications is a reliable and dynamic method that sorts incident OAM states without altering them. Here we report a wavelength-independent technique capable of dynamically filtering individual OAM states based on the resonant transmission of a tunable optical cavity. The cavity length is piezo-controlled to facilitate dynamic reconfiguration, and the sorting process leaves both the transmitted and reflected signals in their original states for subsequent processing. As a result, we also show that a reconfigurable sorting network can be constructed by cascading such optical resonators to handle multiple OAM states simultaneously. This approach to sorting OAM states is amenable to integration into optical communication networks and has implications in quantum optics, astronomy, optical data storage and optical trapping.

physics.optics↗

arXiv2017

Diffraction-Free Bloch Surface Waves

In this letter, we demonstrate a novel diffraction-free Bloch surface wave (DF-BSW) sustained on all-dielectric multilayers that does not diffract after being passed through three obstacles or across a single mode fiber. It can propagate in a straight line for distances longer than 110 {\mu}m at a wavelength of 633 nm and could be applied as an in-plane optical virtual probe, both in air and in an aqueous environment. The ability to be used in water, its long diffraction-free distance, and its tolerance to multiple obstacles make this DF-BSW ideal for certain applications in areas such as the biological sciences, where many measurements are made on glass surfaces or for which an aqueous environment is required, and for high-speed interconnections between chips, where low loss is necessary. Specifically, the DF-BSW on the dielectric multilayer can be used to develop novel flow cytometry that is based on the surface wave, but not the free space beam, to detect the surface-bound targets.

physics.optics↗

arXiv2017

Towards broadband dynamic structuring of a complex plasmonic field

The ability to tailor a coherent surface plasmon polariton (SPP) field is an important step towards a number of new opportunities for a broad range of nanophotonic applications such as sensing [1,2], nano-circuitry [3,4], optical data storage [5,6], super-resolution imaging [7,8], plasmonic tweezers [9,10] and in-plane communications [11]. Scanning a converging SPP spot or designing SPP profiles using an ensemble of spots have both been demonstrated previously [12-14]. SPPs, however, are normally excited by intense, coherent light sources-lasers. Hence, interference between adjacent spots is inevitable and will affect the overall SPP field distributions. Here we report a reconfigurable and wavelength-independent platform for generating a tailored 2D SPP field distribution by considering the coherent field as a whole rather than individual spots. The new perspective also enables us to reveal the inherent constraints implied in a 2D coherent field distribution. Our generic design methodology works not only for SPP waves but also for other two-dimensional wave systems like surface acoustic waves [15].

physics.optics↗

arXiv2014

Mode-matching metasurfaces: coherent reconstruction and multiplexing of surface waves

Metasurfaces are promising two-dimensional metamaterials that are engineered to provide unique properties or functionalities absent in naturally occurring homogeneous surfaces. Here, we report a type of metasurface for tailored reconstruction of surface plasmon waves from light. The design is generic in a way that one can selectively generate different surface plasmon waves through simple variation of the wavelength or the polarization state of incident light. The ultra-thin metasurface demonstrated in this paper provides a versatile interface between the conventional free-space optics and a two-dimensional platform such as surface plasmonics.

physics.optics↗

arXiv2014

The Green-function transform and wave propagation

Fourier methods well known in signal processing are applied to three-dimensional wave propagation problems. The Fourier transform of the Green function, when written explicitly in terms of a real-valued spatial frequency, consists of homogeneous and inhomogeneous components. Both parts are necessary to result in a pure out-going wave that satisfies causality. The homogeneous component consists only of propagating waves, but the inhomogeneous component contains both evanescent and propagating terms. Thus we make a distinction between inhomogenous waves and evanescent waves. The evanescent component is completely contained in the region of the inhomogeneous component outside the k-space sphere. Further, propagating waves in the Weyl expansion contain both homogeneous and inhomogeneous components. The connection between the Whittaker and Weyl expansions is discussed. A list of relevant spherically symmetric Fourier transforms is given.

physics.optics↗