arXiv Science⌕ Search

arXiv subjects

Jiangzhou Wang

Publications and source records attributed to Jiangzhou Wang.

At least 19 recordsLinked to original sources

Optimal Community Recovery by Spectrally Initialized Variational EM in General Stochastic Block Models

We prove a Chernoff-exponent guarantee for the output of spectrally initialized batch variational EM after a prescribed iteration budget, without assuming global maximization of its variational objective. The iteration repeatedly estimates the entire block probability matrix and community proportions from the same sparse graph. We consider a fixed number of communities with proportions bounded away from zero and fixed, positive, distinct connectivity profiles; neither assortativity nor full rank is required. The algorithm uses simultaneous softmax updates without sample splitting or posterior thresholding. Its analysis must control the feedback between estimated parameters, soft labels and reused edges at an exponentially small risk scale. We establish a uniform one-step bound over data-dependent soft assignments whose random remainder has exponentially small expectation. Combined with an exponentially reliable regularized spectral initializer, this yields an unconditional expected misclassification rate bounded by $\exp\{-(1-o(1))J_n\}$ throughout the sparse, diverging-degree regime, where $J_n$ is the minimum nodewise Chernoff information. Matching lower bounds establish first-order logarithmic minimax optimality on local parameter spaces allowing unknown connectivity and varying community counts. The algorithm also attains the sharp first-order exact-recovery threshold. Numerical experiments illustrate refinement gains and sensitivity to initialization and imbalance.

math.ST↗

A Multi-View Low-Latency Direction-Sensing for Low-Altitude Network via a Multi-Armed Array

Due to the directional antenna pattern, the received signal power decreases when the target deviates from the array boresight, degrading direction-sensing accuracy. Although rotatable arrays can alleviate this problem, repeated array rotations will induce an incremental long sensing latency. To break the dilemma of harvesting the directive gain from element and making a low-latency sensing, a multi-armed array comprising multiple subarrays with different orientations is proposed to provide wide spatial coverage encompassing low-altitude and terrestrial regions while enabling multi-view direction sensing. However, the different views lead to different direction-sensing accuracies. To fully exploit the complementary information from multiple views, two fusion methods, called SNR-weighted fusion and logistic-weighted fusion, are developed. The former directly assigns fusion weights according to the estimated received SNRs, whereas the latter employs an exponential SNR mapping to further emphasize high-SNR subarrays. Furthermore, the Cramer-Rao lower bound (CRLB) is derived to provide a theoretical benchmark for the proposed multi-view direction-sensing system. Simulation results show that logistic-weighted fusion achieves better accuracy in the very low-SNR regime, while both proposed methods approach the CRLB at medium and high SNRs and maintain stable sensing performance.

eess.SP↗

Channel Measurements and Characterization with Phase Drift Compensation for Outdoor 330-360 GHz MIMO Communications

In this paper, an outdoor channel measurement campaign at 330-360 GHz employing a 128 * 4 virtual antenna array (VAA)-based multiple-input multiple-output (MIMO) configuration is conducted. The transmitter (Tx) and receiver (Rx) location pairs are classified into line-of-sight (LoS) and obstructed-LoS (OLoS) scenarios to enable a detailed investigation of outdoor terahertz (THz) band channel characteristics. During the measurement process, the stationarity of the outdoor environment is carefully verified, and a linear phase drift (PD) effect is identified. Then, we propose a PD-aware Space-Alternating Generalized Expectation-Maximization (SAGE) algorithm, which significantly improves both delay resolution and channel parameter estimation accuracy. Based on the processed measurement data, we characterize key channel properties, including the power delay profile, path loss, shadow fading, delay spread, angular spread, Rician K-factor, as well as their cumulative distribution functions and correlation characteristics. In addition, near-field effects and MIMO-specific properties, including the spatial non-stationarity and the cluster birth-death property, are analyzed.

eess.SP↗

Queue-Aware Token Communications: Bridging AI Representation and Wireless Service

The rapid advancement of foundation models and edge intelligence is transforming wireless networks from data-oriented communication systems into artificial intelligence (AI)-native service platforms. Token communications (TokenCom) has emerged as a promising paradigm that directly transmits task-oriented AI representations. However, existing studies typically assume that generated tokens can be transmitted immediately, overlooking the queueing dynamics arising from the mismatch between token workload generation and time-varying wireless service capability. To address this limitation, we introduce Queue-Aware TokenCom, which explicitly incorporates token queues into the AI service pipeline. We present an end-to-end architecture integrating AI representation generation, token workload management, wireless transmission, and downstream task inference. We then discuss two key design directions: budget-aware token representation optimization and queue-aware token service optimization, with the token budget serving as a critical interface between AI performance and communication efficiency. Moreover, we investigate fixed and adaptive token budget strategies to characterize the fundamental tradeoff between AI performance and communication efficiency in dynamic wireless environments. Finally, we outline research directions toward closed-loop, task-aware, and scalable TokenCom systems.

cs.AI↗

Practical Hardware-Efficient ISAC: Enabling Multi-Target Sensing With Few RF Chains

Hybrid analog--digital arrays reduce hardware cost in integrated sensing and communications (ISAC), but spatial compression and beam-dependent scan responses complicate multi-target estimation with few radio-frequency (RF) chains. To address these challenges, this paper proposes a burst beam-scanning multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) framework that reuses downlink reference signals for joint range, radial-velocity, elevation, and azimuth estimation. Specifically, a structured global--local dual-tensor estimator separates targets by using scanning observations and refines their parameters from selected-beam RF-chain responses, with delay--Doppler signatures maintaining cross-stage target correspondence. The recovered subarray responses yield closed-form elevation and azimuth estimates through exact sum--difference relations, avoiding small-angle approximations and fine angular grid searches. To further improve Doppler accuracy, spatial-mask-aided weighted least squares exploits the longer inter-burst temporal aperture while resolving phase ambiguity using intra-burst estimates. The joint multi-target Cramér--Rao lower bound (CRLB) and corresponding three-dimensional (3D) positioning bound are also derived to characterize estimation performance. Simulation results show that the proposed scheme achieves near-CRLB estimation accuracy at high transmit powers and centimeter- to millimeter-level 3D positioning with only four RF chains, while maintaining low computational cost.

eess.SP↗

Model-Order-Adaptive Channel Estimation for AFDM Systems with Fractional Delay and Doppler

Affine frequency division multiplexing (AFDM) has emerged as a promising waveform for high-mobility communications owing to its ability to exploit multipath diversity. However, channel state information (CSI) acquisition remains challenging in channels with fractional delay and Doppler and an unknown number of propagation paths. In this paper, we investigate the channel estimation for AFDM systems. We first analyze the AFDM response in the presence of fractional-delay-induced frequency wrapping. The analysis reveals that fractional delay may displace the dominant extremum and generate informative secondary extrema. Then, we develop a model-order-adaptive channel estimator within an improved space-alternating generalized expectation-maximization (SAGE) framework. A dual-pilot reference symbol is employed for path and delay initialization, while pilot observations across multiple AFDM symbols provide temporal information for Doppler estimation. New paths are identified through statistically controlled residual tests, whereas unsupported or redundant paths are removed by conditional support pruning. The delay, Doppler frequency, and complex gain of each retained path are subsequently estimated through a coarse-to-fine procedure and refined using the exact AFDM likelihood. Simulation results demonstrate that the proposed method achieves lower normalized mean squared error (NMSE) and bit error rate (BER) than representative SAGE, sparse-recovery, and Bayesian benchmarks. It also provides reliable path detection and model-order estimation and maintains robust performance at terminal velocities of up to 600~km/h.

cs.IT↗

Antenna Coding by Pixel Antennas: Unlocking A New Dimension for Wireless Communications

Conventional wireless communication systems employ antennas with fixed radiation patterns. Enhancing system performance by increasing the number of antennas would push the limits of cost and size for communication devices. To overcome this issue, novel antenna technologies are urgently desired to break through the fundamental performance bottleneck and engineering limits. Pixel antennas provide a general framework for highly reconfigurable antennas, which can flexibly adjust radiation patterns via controlling variable lumped elements placed across adjacent pixels, unlocking novel degrees of freedom (DoF) in the beamspace domain. Recently, an emerging antenna coding technique links wireless system performance to the antenna configurations. This enables the use of pixel antennas to enhance system performance by leveraging the DoF from the antenna side. In this article, we provide a comprehensive overview on antenna coding by pixel antennas. Specifically, based on the pixel antenna model, the concept of antenna coding is firstly introduced, followed by a discussion on the classifications of antenna coding. Two cases for channel gain and multiplexing gain enhancement are highlighted to show the effectiveness of antenna coding in wireless communications. Besides, various optimization approaches for antenna coding design are investigated. Finally, the challenges and opportunities are outlined, providing guidance for future works.

eess.SP↗

Fast Antenna Coding Based on Pixel Antennas for Enhancing Spectral Efficiency of MIMO Systems

A fast antenna coding technique based on pixel antennas is investigated. Antenna coding is a technique that dynamically controls the ON/OFF states of PIN diodes to adjust radiation patterns of pixel antennas. By switching the antenna coder at the baseband symbol period, this technique can modulate information on the radiation patterns in the beamspace. This allows the pixel antenna to transmit additional information, thereby enhancing the spectral efficiency (SE) of multiple-input multiple-output (MIMO) systems. Specifically in this work, we firstly introduce the concept of pixel antenna and the fast antenna coding. Then based on the beamspace channel representation, we provide the system model of MIMO with the fast antenna coding and derive the SE and bit error rate (BER). The SE enhancement achieved by fast antenna coding is also demonstrated. An optimization approach is also presented for obtaining the antenna coders that can generate the desired radiation patterns for fast antenna coding. Using the optimized antenna coders, we evaluate the SE, energy efficiency (EE), and BER of MIMO systems with fast antenna coding. The simulation results show that for a 4-by-4 MIMO system, SE is enhanced by 12 bits/s/Hz and EE can be improved by 33\% when compared with conventional MIMO, demonstrating the effectiveness of the fast antenna coding technique.

eess.SP↗

FlashSAM: Lightweight Vision Model for Multi-UAV Token Communication in Low-Latitude Wireless Networks

Token Communication (TokenCom) is a promising paradigm for low-altitude wireless networks, as it focuses on transmitting task-relevant core information, particularly in environments with uncertainty, noise, and stringent bandwidth constraints. However, existing TokenCom systems still face several challenges, including inefficient knowledge base construction, ineffective token encoding, and limited support for multi-user token sharing. To address these issues, we propose a Lightweight Vision Model-based Multi-Unmanned Aerial Vehicle (UAV) Token Communication (LVM-MTC) system. First, we develop a lightweight Segment Anything Model (SAM), termed FlashSAM, which incorporates a set of lightweight convolutional modules to significantly reduce the number of model parameters. Building on FlashSAM, we construct a Lightweight Knowledge Base (LKB) to enable efficient object-level perception. Next, we design an Efficient Token Codec (ETC) based on the Masked Autoencoder (MAE) architecture. ETC improves compression efficiency at both the pixel and token levels, and provides lightweight token decoding tailored for resource-constrained UAVs. Furthermore, we propose a Multi-UAV Token Sharing (MTS) scheme for multi-UAV TokenCom. By measuring token similarity across UAVs, MTS consolidates similar tokens and transmits them through broadcast transmission, thereby further improving transmission efficiency. Finally, simulation results validate the feasibility and effectiveness of the proposed LVM-MTC system.

cs.IT↗

Adaptive Antenna Element Activation for Multiuser Uniform Spherical Arrays

Uniform spherical arrays provide full-space coverage. However, owing to directional element patterns, full-array transmission activates many elements that contribute little to a given user, resulting in increased system overhead and inefficient power allocation. To address this issue, this letter proposes an adaptive element activation strategy for multiuser uniform spherical arrays that reduces the number of physically active elements while satisfying individual user rate requirements. The proposed strategy constructs a user-specific candidate sequence according to the angle between each element boresight and the user direction. At each iteration, it selects, among the unsatisfied users, the user-element connection that provides the largest improvement in the aggregate rate deficit. Simulation results show that fewer than half of the elements are sufficient for a single user to achieve 80% of its full-array rate, while fewer than 70% are sufficient to achieve the full-array rates of all users in multiuser scenarios. Moreover, the proposed strategy consistently requires a lower active-element ratio than the baseline methods across all tested configurations.

eess.SP↗

From Semantic to Token Communication: The Next Paradigm for Large-Model-Driven 6G Intelligent Connectivity

The ambitious requirements of sixth-generation (6G) networks are driving communication systems from reliable bit delivery toward meaning-aware and task-oriented connectivity. Large models (LMs), with strong multimodal understanding and generation capabilities, have accelerated this shift and made semantic communication (SemCom) increasingly practical. Yet current LM-driven SemCom remains fragmented: semantic representations are typically tied to specific modalities, models, or tasks. While the bit provides a universal unit for digital transport, there is still no analogous unit for representing and processing semantics, which limits interoperability, theoretical unification, and scalable system design. We argue that tokens provide a natural candidate for this missing abstraction. Two trends support this: unified multimodal LMs now encode text, images, audio, video, and robot actions in one token space, while distributed LM inference already generates substantial token-level traffic through expert routing, cache transfer, and speculative decoding. Token communication (TokenCom) emerges by unifying these trends, using the LM's native processing unit as a communication abstraction above the bit level and enabling importance assignment, error handling, and resource allocation directly at token granularity. This survey traces the evolution from LM-driven SemCom to TokenCom. We review three major directions of LM-driven SemCom: source-centric semantic coding, channel semantics for physical-layer tasks, and collaborative edge-device intelligence. We then examine the token abstraction, the transmission techniques it requires, and two emerging paradigms, namely TokenCom for LM services and for embodied and agentic intelligence. Finally, we identify open challenges toward unified, scalable, and AI-native 6G communication systems.

eess.SP↗

An Optical Pathway to Movable Rydberg Atomic Quantum Receivers

This paper develops an optically movable Rydberg atomic quantum receiver (RAQR), in which the probe and coupling beams are steered within each vapor cell to dynamically reconfigure the effective radio-frequency (RF) sensing position without mechanical actuation. A closed-form equivalent baseband model is derived by separating the atomic transduction coefficient, optical steering phase, and cell-center array response into distinct factors and the accuracy of the resulting model is validated against numerical solutions of the Lindblad master equation. Based on the derived model, we reveal two complementary channel-shaping mechanisms, including intrinsic beam-pattern shaping through RF-to-optical transduction and per-cell phase control enabled by optical displacement. To further exploit these capabilities, a non-convex sum-rate maximization problem is formulated over the optical positions and local oscillator design and solved via an alternating optimization framework with analytical gradients. Simulation results validate the derived model and demonstrate substantial performance gains enabled by optical movability, highlighting its potential as a programmable receiver architecture for future wireless networks.

eess.AS↗

Tensor Train Decomposition-based Channel Estimation for MIMO-AFDM Systems with Fractional Delay and Doppler

Affine Frequency Division Multiplexing (AFDM) has emerged as a promising chirp-based multicarrier technology for high-speed communication systems. To fully exploit the diversity gain offered by AFDM, accurate channel estimation is essential. However, existing studies have mainly focused on the integer-delay-tap scenario and single-symbol pilot-based estimation. Since delay taps in practice are generally fractional, approximating them as integers not only degrades delay estimation accuracy but also severely affects Doppler frequency estimation. To address this problem, in this paper, we investigate channel estimation for multiple-input multiple-output (MIMO)-AFDM systems. A time-affine frequency (T-AF) domain pilot structure is proposed to exploit time-domain phase variations. By leveraging the rotational invariance property in the spatial and temporal domains, a channel estimation algorithm based on Vandermonde-structured tensor-train (TT) decomposition is developed. The proposed algorithm demonstrates superior computational efficiency compared with state-of-the-art parameter estimation methods. Moreover, diverging from current studies, we derive the global Ziv-Zakai bound (ZZB) as an alternative parameter estimation error lower bound to the Cramér-Rao bound (CRB). Numerical results show that the derived ZZB provides tighter global performance characterization and successfully captures the threshold phenomenon in mean square error (MSE) performance in the low-SNR regime. Furthermore, the proposed algorithm achieves superior communication performance relative to the existing schemes, while offering a computational speedup, reducing the execution time by an order of magnitude compared to the state-of-the-art iterative algorithms.

cs.IT↗

AFDM-ISAC With Fractional Delay-Doppler Coupling

Affine frequency division multiplexing (AFDM) is a promising chirp-based multicarrier waveform for high-mobility integrated sensing and communication (ISAC). Accurate angle, delay, and Doppler estimation is essential for AFDM sensing. Since target delays and Doppler shifts are generally continuous-valued, representing them on a discrete delay--Doppler grid causes energy leakage and peak displacement in the discrete affine Fourier transform (DAFT) domain. The AFDM chirp also induces delay--Doppler coupling in the DAFT-domain response. The resulting DAFT-domain matching-score surface exhibits a local ridge that is not aligned with the normalized-delay and normalized-Doppler axes. To address these issues, this paper investigates joint estimation of angle and continuous-valued delay--Doppler parameters for a colocated AFDM-ISAC sensing architecture. A transform-domain sparse sensing model is formulated from the fractional DAFT-domain response. Based on this model, a coupled-coordinate Newtonized orthogonal matching pursuit (CC-NOMP) estimator is developed. CC-NOMP uses the AFDM-induced coupling coordinate to parameterize the dominant local ridge. It combines coupled-coordinate Newton refinement with safeguarded updates, coupling-aligned delay refinement, and cyclic multi-target refinement to estimate angle, continuous normalized delay, and normalized Doppler. A deterministic Cramér--Rao bound and a dominant-order complexity analysis are also derived. Simulation results with continuous-valued off-grid target parameters show that CC-NOMP achieves lower delay and Doppler error floors than the considered baselines while maintaining comparable angle-estimation accuracy.

cs.IT↗

Unified Analytical Framework for Emergency RIS-UAV Networks Under Practical Impairments

Heterogeneous unmanned aerial vehicle (UAV) networks embedded with reconfigurable intelligent surfaces (RISs) present a promising paradigm for emergency wireless communications (EWC), offering enhanced coverage and resilience in harsh environments. However, extreme conditions in disaster areas necessitate robust performance evaluation under practical impairments, including outdated/imperfect channel state information (CSI) and discrete RIS phase shifts. Existing works lack a unified analytical framework for modeling CSI errors, employing inconsistent approaches that treat errors either as channel gain or as equivalent interference, leading to ambiguous benchmarks. To address this, we propose the $ζ$-Model, a unified receiver-equivalent signal-to-noise (SNR) framework that continuously parameterizes residual-error exploitability via $ζ$. This framework unifies the information-theoretic model (ITM) and the engineering baseline model (EBM) as the optimistic and pessimistic benchmark receiver treatments, while incorporating the simplified engineering model (SEM) as a tractable approximation. By employing the Fisher-Snedecor $\mathcal{F}$ distribution to capture severe fading and shadowing, we derive moment-matching-based closed-form or finite-sum approximate expressions and asymptotic expressions for average capacity (AC), effective capacity (EC), and outage probability (OP) under the proposed unified framework and its boundary cases. Validated by Monte Carlo simulations, our framework quantifies performance limits and provides crucial insights for designing robust and efficient EWC systems under various channel conditions and system impairments.

eess.SP↗

Federated Learning-Based Localization with Heterogeneous Fingerprint Database

Fingerprint-based localization plays an important role in indoor location-based services, where the position information is usually collected in distributed clients and gathered in a centralized server. However, the overloaded transmission as well as the potential risk of divulging private information burdens the application.Owning the ability to address these challenges, federated learning (FL)-based fingerprinting localization comes into people's sights, which aims to train a global model while keeping raw data locally. However, in distributed machine learning (ML) scenarios, the unavoidable database heterogeneity usually degrades the performance of existing FL-based localization algorithm (FedLoc). In this paper, we first characterize the database heterogeneity with a computable metric, i.e., the area of convex hull, and verify it by experimental results. Then, a novel heterogeneous FL-based localization algorithm with the area of convex hull-based aggregation (FedLoc-AC) is proposed. Extensive experimental results, including real-word cases are conducted. We can conclude that the proposed FedLoc-AC can achieve an obvious prediction gain compared to FedLoc in heterogeneous scenarios and has almost the same prediction error with it in homogeneous scenarios. Moreover, the extension of FedLoc-AC in multi-floor cases is proposed and verified.

eess.SP↗

Providing Location Information at Edge Networks: A Federated Learning-Based Approach

Recently, the development of mobile edge computing has enabled exhilarating edge artificial intelligence (AI) with fast response and low communication cost. The location information of edge devices is essential to support the edge AI in many scenarios, like smart home, intelligent transportation systems and integrated health care. Taking advantages of deep learning intelligence, the centralized machine learning (ML)-based positioning technique has received heated attention from both academia and industry. However, some potential issues, such as location information leakage and huge data traffic, limit its application. Fortunately, a newly emerging privacy-preserving distributed ML mechanism, named federated learning (FL), is expected to alleviate these concerns. In this article, we illustrate a framework of FL-based localization system as well as the involved entities at edge networks. Moreover, the advantages of such system are elaborated. On practical implementation of it, we investigate the field-specific issues associated with system-level solutions, which are further demonstrated over a real-word database. Moreover, future challenging open problems in this field are outlined.

eess.SP↗

Optimal Measurement of Drone Swarm in RSS-based Passive Localization with Region Constraints

Passive geolocation by multiple unmanned aerial vehicles (UAVs) covers a wide range of military and civilian applications including rescue, wild life tracking and electronic warfare. The sensor-target geometry is known to significantly affect the localization precision. The existing sensor placement strategies mainly work on the cases without any constraints on the sensors locations. However, UAVs cannot fly/hover simply in arbitrary region due to realistic constraints, such as the geographical limitations, the security issues, and the max flying speed. In this paper, optimal geometrical configurations of UAVs in received signal strength (RSS)-based localization under region constraints are investigated. Employing the D-optimal criteria, i.e., minimizing the determinate of Fisher information matrix (FIM), such optimal problem is formulated. Based on the rigorous algebra and geometrical derivations, optimal and also closed form configurations of UAVs under different flying states are proposed. Finally, the effectiveness and practicality of the proposed configurations are demonstrated by simulation examples.

eess.SP↗