arXiv Science⌕ Search

arXiv subjects

Jiancheng An

Publications and source records attributed to Jiancheng An.

At least 19 recordsLinked to original sources

SIM-Enabled Wave-Domain Processing in MIMO-OFDM Receivers: Architecture, Modeling, and Validation

This paper develops a wave-domain linear receiver for wideband MIMO-OFDM, where the main high-dimensional linear processing conventionally performed after sampling is physically shifted to propagation through stacked intelligent metasurfaces (SIMs). The proposed receiver transforms receive-port waveforms into OFDM-domain symbols through three cascaded SIM-enabled functional sections. The first section, SIM_1, performs channel-memory processing and channel shortening in an energy-concentration sense, suppressing the out-of-cyclic-prefix (CP) effective tail before OFDM analysis. SIM_2 realizes CP removal and discrete Fourier transform (DFT) analysis as cyclic-windowed OFDM matched filtering by exploiting useful-window memory and analytical Fourier phase coding. SIM_3 implements residual virtual-subcarrier MIMO linear detection, completing the wave-domain linear receive chain up to symbol slicing. Synchronization, control, slicing, and decoding remain digital, while the dominant linear receive operations are moved to the wave domain. A staged configuration framework is developed: the numerology-dependent OFDM analyzer is compiled offline, whereas the channel-dependent memory processor and detector are configured over the coherence time using architecture-aware learning-assisted control. Numerical results validate both functional replacement and link performance, confirming nearly lossless replacement under CP-sufficient MIMO-OFDM conditions, with robustness to residual timing offsets and effective channel-delay-profile perturbations. Substantial gains under CP-insufficient channels are also demonstrated by suppressing out-of-CP leakage before OFDM analysis.

eess.SP↗

An Efficient SIM Beamforming Scheme Based on Physical-Empowered Projected Gradient

Stacked Intelligent Metasurfaces (SIMs) have emerged as a promising technology for next-generation wireless systems. Especially in multi-input multi-output (MIMO) systems, it has the potential to realize complicated wave-domain transformations with low hardware costs and energy consumption. However, SIM-assisted MIMO systems face two major challenges in channel estimation and beamforming. As the SIM elements do not have the signal processing capability, channel estimation can only be conducted in an indirect manner, which makes it challenging. Moreover, the precoding optimization after channel estimation is non-convex and also difficult. Targeting these issues, we exploit the time-division duplex (TDD) channel reciprocity to calculate the gradient backpropagation in an over-the-air manner. Based on this structure, we propose a gradient-based optimization framework that optimizes beamforming without explicitly estimating the SIM--UE channel. The proposed method, namely the physical projected gradient descent (P2GD) method, optimizes the achievable sum rate while incorporating zero-forcing (ZF) constraints. Based on the method of incorporating the ZF restriction, we propose two variations of P2GD, namely user equipment (UE)-P2GD and base station (BS)-P2GD. We also provide a theoretical convergence analysis and projected gradient techniques to ensure physical feasibility. Simulation results show that the proposed approach can achieve suboptimal beamforming in the multi-user system within a small number of over-the-air iterations, using a per-direction signaling budget below the pilot cost of explicit SIM--UE channel estimation. The proposed method provides a low-overhead beamforming scheme for SIM systems without explicit SIM--UE channel estimation.

eess.SP↗

WirelessMathBench-XL: An Auditable Benchmark for Wireless Mathematical Reasoning

Technical-domain benchmarks constructed from arXiv papers can overlap the same public text used in LLM pretraining. Auditing this risk at training-corpus scale requires searching billions of corpus n-grams while retaining per-item evidence that users can inspect and recompute. We contribute a reverse-probe audit at a fixed 13-gram threshold: it indexes benchmark prompts, streams public pretraining corpora, and emits per-problem prompt-surface lexical-overlap metadata with memory that scales with the benchmark. We instantiate the protocol in WirelessMathBench-XL, a 4,027-problem wireless mathematical-reasoning benchmark built from 836 retained arXiv papers across 20 subfields. Against 12.9B streamed 13-grams from RedPajama-arXiv, the audit identifies a strict zero-hit view S0 covering 3,853 problems (95.7%). Filtering to S0 changes accuracy by less than 1 pp for every evaluated model; frontier calibration rows form one high-accuracy cluster between 86.5% and 91.3%, not a resolved rank order. Only 30/800 test items carry detected overlap. Under an all-flagged-correct counterfactual, their largest possible positive score inflation is 0.31-0.51 pp for the frontier rows, so full-versus-S0 is a bounded, structurally underpowered stability summary rather than a contamination-effect test or cleanliness claim. The audit channel does not cover paraphrase, target-answer, post-training, or closed-corpus exposure. The release includes source-paper identifiers, verifier-facing ground truths, audit and threshold metadata, filtered views, a paper-disjoint sensitivity view, evaluation traces, paired-bootstrap scripts, training recipes, Croissant metadata, and a Datasheet for Datasets.

cs.LG↗

Stacked Intelligent Metasurface-Diffractive Deep Neural Networks for Onboard Terrain Classification from SAR Level-0 Raw Data

Real-time terrain classification directly from Level-0 raw Synthetic Aperture Radar (SAR) data remains restricted by traditional digital-centric paradigms, where the processing of noisy, high-dimensional patches is hindered by computationally intensive processors and significant downlink latency. To address these fundamental limitations, this work establishes a new research paradigm for autonomous on-board sensing by proposing a Stacked Intelligent Metasurface-Diffractive Deep Neural Network (SIM-D$^2$NN). This architecture leverages the physical wave-propagation medium to offload inference tasks from digital processors to a physical device. By executing in-wave feature mapping, the SIM-D$^2$NN facilitates a move toward an integrated `compute-while-transmitting' framework, providing an alternative to the traditional `digitize-then-process' sequence. The multi-layer metasurface is positioned at the forefront of the satellite communication module. The initial layer modulates the raw SAR data through both amplitude and phase adjustments, where a 90$^\circ$ phase rotation is introduced as a lightweight but effective augmentation strategy to enhance robustness against noise and Doppler distortions. Subsequent layers learn variable phase shifts, enabling advanced feature mapping for the classification task. The classification results at the terrestrial station can be directly obtained based on the signal amplitude received at each antenna. This design reduces reliance on downlink bandwidth and high-power terrestrial computing, achieving performance around 90% in the binary task directly from real raw SAR data in terms of accuracy, precision, recall, and F1 Score. Therefore, our method helps bridge the gap between next-generation remote sensing tasks and in-orbit processing needs, paving the way for computationally efficient remote sensing applications.

eess.SP↗

A Fully Wave-Domain Wideband MU MIMO OFDM Transmitter via Stacked Intelligent Metasurfaces

This paper proposes an advanced realization principle for wideband multiuser multiple-input multiple-output orthogonal frequency-division multiplexing (MU-MIMO OFDM) transmitters, where the conventional transmitter-side baseband chain is physically synthesized in the wave domain. For design and optimization purposes, this fully wave-domain wideband MU-MIMO OFDM transmitter implemented by a cascaded SIM structure is functionally partitioned into two cascaded SIM blocks. The first block, denoted as SIM_1, integrates symbol loading and channel-adaptive MU-MIMO precoding updated at the channel-coherence timescale, mapping the user streams to a virtual port-subcarrier representation. The second block, denoted as SIM_2, acts as an offline-configured sampling-rate modulator that materializes the inverse discrete Fourier transform (IDFT) and cyclic prefix (CP) insertion directly in the wave domain. This baseband-free architecture establishes a virtual-to-physical transition from information bits to radiated CP-extended OFDM waveforms. To account for practical nonidealities, SIM_2 is optimized to fit the ideal multi-port CP-OFDM operator, and its residual response is mapped into an effective coupling matrix. Then, SIM_1 is optimized in a communication-oriented manner by jointly adapting discrete phase shifts and stream-subcarrier power loading to maximize the sum spectral efficiency. Results demonstrate the convergence, architecture trade-off, wave-domain OFDM materialization accuracy, and competitive performance of the proposed baseband-free transmitter.

eess.SP↗

Joint Power Allocation and Phase-Shift Design for Beyond-Diagonal Stacked Intelligent Metasurfaces-Aided ISAC Systems

Stacked intelligent metasurfaces (SIM) provide an efficient architecture for integrated sensing and communication (ISAC) with few radio-frequency (RF) chains. However, diagonal SIM provide only element-wise phase control, so balancing multiuser communication and sensing performance may require additional layers. In this letter, we propose a beyond-diagonal SIM (BD-SIM) architecture for ISAC, enabling controllable intra-layer coupling through reconfigurable impedance networks, thereby enhancing wave-domain processing flexibility. We develop a unified alternating optimization framework applicable to fully-connected, group-connected, and diagonal SIM architectures. Within this framework, we derive a closed-form power allocation rule and propose an effective variable separation algorithm for multi-layer phase-shift design. Simulation results show that the proposed BD-SIM achieve a better communication-sensing trade-off and require fewer layers to attain performance comparable to conventional SIM.

cs.IT↗

Bistatic Integrated Sensing and Communications with Flexible Intelligent Metasurfaces

We propose a novel doubly-dispersive (DD) multiple-input multiple-output (MIMO) channel model incorporating flexible intelligent metasurfaces (FIMs), suitable for integrated sensing and communications (ISAC) in high-mobility scenarios. We show how the proposed FIM-parameterized DD (FPDD) channel model extends to multicarrier waveforms known to perform well in DD environments, namely, orthogonal frequency division multiplexing (OFDM), orthogonal time frequency space (OTFS), and affine frequency division multiplexing (AFDM). Leveraging this model, we formulate an achievable rate maxi-mization problem with a sensing constraint for all waveforms and solve it via gradient ascent with closed-form gradients. Numerical results indicate that FIM technology significantly impacts the achievable rate, with careful parametrization essential for strong ISAC performance across all waveforms.

eess.SP↗

Stacked Intelligent Metasurface-Aided Wave-Domain Signal Processing: From Communications to Sensing and Computing

Artificial neural networks possess remarkable capabilities for abstract feature extraction, while electromagnetic computing leverages wave propagation to execute complex mathematical operations. Concurrently, metasurfaces engineered from subwavelength meta-atoms offer unprecedented control over electromagnetic wavefronts. Synthesizing these three cutting-edge fields has sparked significant interest in developing electromagnetic neural networks via stacked intelligent metasurface (SIM) technology, which aims to execute diverse signal processing tasks directly within the wave domain. By enabling direct processing of information-carrying electromagnetic waves, SIMs offer a promising paradigm for high-speed, massively parallel, and low-power signal processing. This article provides a comprehensive overview of SIM technology, beginning with its evolutionary trajectory. We then delve into its theoretical foundations and examine state-of-the-art SIM hardware prototypes. Furthermore, we analyze the optimization and training strategies devised to configure SIM functionalities from two distinct perspectives. Additionally, the diverse applications of SIM technology across the communication, sensing, and computing domains are explored, supported by experimental evidence that highlights its ability to sustain multiple functions within a single device. Finally, we outline critical technical challenges to deploying SIMs in next-generation wireless networks and chart promising research directions to fully unlock their transformative potential.

cs.IT↗

Electromagnetic Neural Network for Direction-of-Arrival Estimation

Accurate and real-time direction of arrival (DOA) estimation is crucial for beamforming in unmanned aerial vehicle (UAV) communication systems. However, the existing high-precision DOA estimation algorithms encounter high computational complexity when implemented on a UAV with on-board signal processing constraints. To tackle this issue, an electromagnetic neural network (EMNN) is developed for DOA estimation, which is capable of generating the angular spectrum of the incident signal based solely on amplitude observation. Specifically, the proposed EMNN consists of two components: a stacked intelligent metasurfaces (SIM) is mounted on the UAV, and each meta-atom is an artificial neuron that can process signals in the electromagnetic domain with low energy consumption and ultra-fast computing speed. Furthermore, a fully connected layer is cascaded to process the received amplitude signal, enhancing the non-linear extraction and representational ability of EMNN. Moreover, to reduce the computational complexity and observation snapshots required for high-resolution DOA estimation, we develop a hierarchical DOA estimation framework, which involves two stages for conducting coarse and fine DOA estimation, respectively. For each stage, EMNN is trained on randomly generated training samples and their corresponding spectra to achieve the desired estimation goal. Finally, the simulation results validate that the proposed EMNN achieves approximately 13 dB gain in classification error reduction over the conventional beamforming (CBF) method in dual-signal scenarios, albeit its lower cost and radio frequency (RF)-related power consumption.

cs.IT↗

Baseband-Free Wideband MU-MIMO OFDM via Stacked Intelligent Metasurfaces

This paper proposes a novel baseband-free wideband MU-MIMO OFDM transmitter architecture enabled by two cascaded stacked intelligent metasurfaces (SIMs). Unlike conventional wireless transmitters, the proposed design shifts symbol loading, MU-MIMO precoding, and OFDM modulation from digital baseband to the wave domain. Specifically, in the first SIM (SIM$_1$), a programmable symbol-loading interface first loads one stacked virtual-subcarrier coefficient vector onto a common monochromatic carrier, while the remaining layers perform channel-adaptive MU-MIMO precoding from the data streams to the port-subcarrier domain. Then, the second SIM (SIM$_2$) realizes offline-configured wave-domain OFDM modulation by implementing the inverse discrete Fourier transform (IDFT) and cyclic-prefix (CP) insertion operator directly in the wave domain. Based on this architecture, we develop a wave-domain system model that explicitly characterizes the virtual-to-physical transition from block-level coefficients to radiated OFDM subcarriers. The designs of SIM$_1$ and SIM$_2$ are formulated as two operator-fitting problems, respectively targeting a block-diagonal wideband precoder and the ideal OFDM modulation operator. Under practical discrete phase constraints, we develop a quantization-aware training-based gradient descent (QAT-GD) framework for both SIM stages. Numerical results verify the effectiveness of the proposed optimization, the correctness of the synthesized wave-domain functionalities, and the strong end-to-end MU-MIMO OFDM performance of the resulting architecture.

eess.SP↗

Stacked Intelligent Metasurface-Enhanced Wideband Multiuser MIMO OFDM-IM Communications

Stacked intelligent metasurfaces (SIM) enable fine-grained wave-domain signal processing, but their wideband deployment is impeded by two structural factors: (i) a single, quasi-static SIM phase tensor must adapt to all subcarriers, and (ii) multiuser scheduling changes the subcarrier activation pattern frame by frame, requiring rapid reconfiguration. To address these, we propose a SIM-enhanced wideband multiuser transceiver built on orthogonal frequency-division multiplexing with index modulation (OFDM-IM). The sparse activation of OFDM-IM confines high-fidelity equalization to the active tones, effectively widening the usable bandwidth. To make the design reliability-aware, we directly target the worst-link bit-error rate (BER) and adopt a max-min per-tone signal-to-interference-plus-noise ratio (SINR) as a principled surrogate, turning the reliability optimization tractable. For frame-rate inference and interpretability, we propose an unfolding projected-gradient-descent network (UPGD-Net) that unrolls across the SIM's layers and algorithmic iterations with a learnable per-iteration step size. Simulations demonstrate that the proposed framework achieves fast convergence and significant BER gains over fully-digital baselines. Notably, the design exhibits superior robustness against errors and outperforms large-aperture hybrid precoding benchmarks in both sum rate and energy efficiency. By combining structural sparsity with a BER-driven, deep-unfolded optimization backbone, the proposed framework effectively resolves the key wideband deficiencies of SIM.

eess.SP↗

Task-Oriented Wave Processing with Stacked Intelligent Metasurfaces: Framework, Fusion, and Challenges

The deep integration of diverse services in sixth-generation (6G) networks poses significant challenges to conventional task-agnostic channels, often resulting in performance conflicts. To resolve these bottlenecks, this article introduces a physical-layer computing paradigm enabled by stacked intelligent metasurfaces (SIMs), transforming the wireless environment from a passive medium into a programmable signal processor. Specifically, we establish a unified framework to map high-level service requirements directly to wave-domain synthesis. We then investigate the fusion of diverse services, demonstrating how the deep computational architecture of SIMs resolves resource conflicts in integrated sensing and communication (ISAC) and integrated communication and computation (ICC) scenarios. Furthermore, we critically analyze fundamental challenges, including diffractive channel modeling and inverse task-to-phase mapping, while validating through numerical results that this approach elevates the system from simple coexistence to true service symbiosis. Finally, we discuss key research directions to pave the way for service-native 6G architectures.

cs.IT↗

DRL-Based Joint Beamforming and Surface Shape Optimization for Flexible Intelligent Metasurface-Aided ISAC Systems

Integrated sensing and communication (ISAC) unifies high-precision sensing and wireless data transmission. In this paper, we investigate the design of ISAC systems enabled by flexible intelligent metasurface (FIM) and aim to minimize the Cramér-Rao bound (CRB) with quality of service (QoS) constraints using deep reinforcement learning (DRL). Specifically, we formulate the joint design of beamforming matrix and FIMs surface shape to reduce the CRB subject to transmit power, QoS and the FIMs surface shape constraints. However, the non-convex formulation makes optimization problem difficult to solve. To tackle this issue, we develop a deep deterministic policy gradient (DDPG) actor critic DRL scheme for the joint design, guided by a constraint aware reward to progressively improve sensing performance. Numerical results demonstrate that jointly optimizing the beamforming matrix and the FIMs surface shape substantially decreases CRB while ensuring communication quality compared with existing rigid arrays.

cs.IT↗

Sparse Channel Estimation for SIM-based mmWave Near-Field Communications

In this paper, we address the channel estimation (CE) problem in SIM-based multi-user (MU) millimeter-wave (mmWave) near-field communication systems. To address the severe path loss and blockage in mmWave communication systems, many meta-atoms are typically integrated into each layer of the SIM. Then, the number of radio frequency (RF) chains at the base station (BS) is fewer than that of meta-atoms per layer, resulting in an underdetermined problem. Additionally, the increase in the number of meta-atoms in each layer expands the SIM's near-field region, leading to the user equipment (UEs) being mostly situated in this region, necessitating precise modeling of the channel under the spherical wavefront assumption. To address these issues, we introduce a compressed sensing (CS)-based CE protocol to tackle the underdetermined problem. In contrast to the traditional CS-based estimation framework, we investigate a polar-domain channel representation to tackle the severe energy spread effect of the classical angular-domain channel representation in near-field communication systems. Specifically, we design a novel polar-domain transform matrix for uniform planar arrays (UPAs), thereby transforming the CE problem into a sparse recovery task of the paths' support set and complex gains. To overcome the limitations of the sparse Bayesian learning (SBL) framework in tackling high-dimensional dictionaries, we propose a low-complexity polar-domain SBL (LCPD-SBL) algorithm, which significantly reduces computational complexity without compromising estimation accuracy.

cs.IT↗

Weighted Sum-Rate Enhancement for Flexible Intelligent Metasurface-Assisted Multicell Systems

Flexible intelligent metasurface (FIM) technology has emerged as a promising technology for enhancing wireless communication performance by dynamically reshaping the propagation environment. Compared with conventional rigid reconfigurable intelligent surfaces (RIS), an FIM is composed of multiple electromagnetic (EM) scattering units, each of which can flexibly modify its displacement in the direction normal to the surface, thereby cooperatively morphing the overall surface shape. This additional degree of freedom (DoF) enables improved beamforming and interference mitigation, particularly in complex multicell scenarios. In this paper, an optimization problem for maximizing the weighted sum-rate (WSR) in a multicell multi-user multiple-input single-output (MU-MISO) system assisted by an FIM deployed at the cell boundary is investigated. We jointly optimize the transmit beamforming at the base station (BS), the phase shift matrix, and the FIM surface shape, subject to constraints on the transmit power budget, unit-modulus reflection coefficients, and surface shape morphing range. Due to the non-convex objective function with highly coupled variables, solving the formulated optimization problem is challenging. To tackle this challenge, we propose an efficient alternating optimization framework that leverages the weighted minimum mean square error (WMMSE) method to reformulate the problem and the block coordinate descent (BCD) algorithm to iteratively update the variables. Specifically, the Riemannian conjugate gradient (RCG) algorithm is leveraged to optimize the phase shift matrix, while the projected gradient descent (PGD) method is adopted to optimize the surface shape of the FIM. Additionally, the optimal beamforming vectors are obtained in closed form.

cs.IT↗

Distributed Electromagnetic Neural Networks for Task-Oriented Semantic Communications

Semantic communications (SemCom) is a promising paradigm that prioritizes the transmission of task-relevant information, thereby enabling superior communication efficiency over traditional bit-centric systems. However, most existing SemCom systems face critical limitations in computational efficiency and spatial flexibility. To overcome these limitations, we propose a novel unmanned aerial vehicles (UAV)-enabled distributed electromagnetic neural network (EMNN) for a task-oriented SemCom system. Specifically, the proposed distributed EMNN is composed of multiple UAV-mounted stacked intelligent metasurfaces (SIM) and a ground receiving station (GRS), where multiple SIMs collaboratively encode image semantics in the wave domain, and the GRS performs decoding based on the received power distribution. Moreover, we employ a temperature-adaptive gradient optimization algorithm to train the distributed EMNN, which mitigates gradient vanishing and enhances learning stability. Finally, the numerical simulation results demonstrate the effectiveness of distributed EMNN in image recognition task-oriented SemCom, achieving an average $8\%$ accuracy improvement over the single-SIM baseline across multiple datasets.

cs.IT↗

Enhanced Channel Estimation for Flexible Intelligent Metasurface-Aided Communication Systems

Flexible intelligent metasurface (FIM) has recently received considerable interest due to its advantage in realizing a better channel condition by dynamically morphing its surface shape. An FIM consists of multiple elements deposited on a flexible substrate. These elements can not only transmit signals, but also adapt their displacements in a direction perpendicular to the FIM surface via an attached controller. In this paper, we consider the channel estimation problem for the uplink of an FIM-enhanced communication system via customizing the orthogonal matching pursuit (OMP) method. Specifically, we formulate an optimization problem of minimizing the column coherence of the measurement matrix by optimizing the FIM's surface shape, subject to the morphing range constraint. Based on the estimated direction of arrival (DOA) and channel gain, we further investigate the signal-to-noise ratio (SNR) improvement in the FIM-enhanced downlink multiple-input single-output (MISO) system. Numerical results demonstrate that an FIM significantly outperforms a conventional rigid uniform planar array (UPA), thereby showing that FIM can substantially improve channel estimation accuracy and achieve SNR improvement, even when using estimated channel parameters.

cs.IT↗

SIM-assisted Secure Mobile Communications via Enhanced Proximal Policy Optimization Algorithm

With the development of sixth-generation (6G) wireless communication networks, the security challenges are becoming increasingly prominent, especially for mobile users (MUs). As a promising solution, physical layer security (PLS) technology leverages the inherent characteristics of wireless channels to provide security assurance. Particularly, stacked intelligent metasurface (SIM) directly manipulates electromagnetic waves through their multilayer structures, offering significant potential for enhancing PLS performance in an energy efficient manner. Thus, in this work, we investigate an SIM-assisted secure communication system for MUs under the threat of an eavesdropper, addressing practical challenges such as channel uncertainty in mobile environments, multiple MU interference, and residual hardware impairments. Consequently, we formulate a joint power and phase shift optimization problem (JPPSOP), aiming at maximizing the achievable secrecy rate (ASR) of all MUs. Given the non-convexity and dynamic nature of this optimization problem, we propose an enhanced proximal policy optimization algorithm with a bidirectional long short-term memory mechanism, an off-policy data utilization mechanism, and a policy feedback mechanism (PPO-BOP). Through these mechanisms, the proposed algorithm can effectively capture short-term channel fading and long-term MU mobility, improve sample utilization efficiency, and enhance exploration capabilities. Extensive simulation results demonstrate that PPO-BOP significantly outperforms benchmark strategies and other deep reinforcement learning algorithms in terms of ASR.10.1109/TWC.2026.3658332

eess.SP↗