arXiv subjects

Jian Li

Publications and source records attributed to Jian Li.

At least 703 records · Page 39Linked to original sources

arXiv2016

Role of Arsenic in Iron-based Superconductivity at Atomic Scale

In iron-based superconductors, a unique tri-layer Fe-As (Se, Te, P) plays an essential role in controlling the electronic properties, especially the Cooper pairing interaction. Here we use scanning tunneling microscopy/spectroscopy (STM/S) to investigate the role of arsenic atom in superconducting Ba0.4K0.6Fe2As2 by directly breaking and restoring the Fe-As structure at atomic scale. After the up-As-layer peeled away, the tunneling spectrum of the exposed iron surface reveals a shallow incoherent gap, indicating a severe suppression of superconductivity without arsenic covering. When a pair of arsenic atoms is placed on such iron surface, a localized topographic feature is formed due to Fe-As orbital hybridization, and the superconducting coherent peaks recover locally with the gap magnitude the same as that on the iron-layer fully covered by arsenic. These observations unravel the Fe-As interactions on an atomic scale and imply its essential roles in the iron-based superconductivity.

cond-mat.supr-con↗

arXiv2016

Cooper Pairing and Phase Coherence in Iron Superconductor Fe1+x(Te,Se)

The Cooper pairing and phase coherence are two fundamental aspects of superconductivity. Due to breaking time reversal symmetry, magnetic impurities are detrimental to superconductivity, yet microscopically how they affect the pairing strength and phase coherence in a real material is less understood. Recently we observed a robust zero-energy bound state at an interstitial Fe impurity (IFI) in superconducting Fe1+x(Te,Se), signifying intense impurity scattering. Here we report a comprehensive study, using scanning tunnelling microscopy/spectroscopy (STM/S) technique, of the global effects of IFIs on the ground state of Fe1+x(Te,Se) over a wide range of IFI concentration x. Our high resolution tunnelling spectroscopy and quasi-particle interference data at very low temperature demonstrate that IFIs hardly affect the electron pairing strength, while they cause significant decoherence of Cooper pairs in precedence of the Coulomb correlation, eventually driving the ground state of the system from strong-coupling-superconductor to diffusive-metal with incoherent electron pairs.

cond-mat.supr-con↗

arXiv2016

Energy-Efficient Joint Congestion Control and Resource Optimization in Heterogeneous Cloud Radio Access Networks

The heterogeneous cloud radio access network (HCRAN) is a promising paradigm which integrates the advantages of cloud radio access network (C-RAN) and heterogeneous network (HetNet). In this paper, we study the joint congestion control and resource optimization to explore the energy efficiency (EE)-guaranteed tradeoff between throughput utility and delay performance in a downlink slotted H-CRAN. We formulate the considered problem as a stochastic optimization problem, which maximizes the utility of average throughput and maintains the network stability subject to required EE constraint and transmit power consumption constraints by traffic admission control, user association, resource block allocation and power allocation. Leveraging on the Lyapunov optimization technique, the stochastic optimization problem can be transformed and decomposed into three separate subproblems which can be solved concurrently at each slot. The third mixed-integer nonconvex subproblem is efficiently solved utilizing the continuity relaxation of binary variables and the Lagrange dual decomposition method. Theoretical analysis shows that the proposal can quantitatively control the throughput-delay performance tradeoff with required EE performance. Simulation results consolidate the theoretical analysis and demonstrate the advantages of the proposal from the prospective of queue stability and power consumption.

cs.IT↗

arXiv2016

Universal signatures of Fermi arcs in quasiparticle interference on the surface of Weyl semimetals

Weyl semimetals constitute a newly discovered class of three-dimensional topological materials with linear touchings of valence and conduction bands in the bulk. The most striking property of topological origin in these materials, so far unequivocally observed only in photoemission experiments, is the presence of open constant-energy contours at the boundary --- the so-called Fermi arcs. In this work, we establish the universal characteristics of Fermi-arc contributions to surface quasiparticle interference. Using a general phenomenological model, we determine the defining interference patterns stemming from the existence of Fermi arcs in a surface band structure. We then trace these patterns in both simple tight-binding models and realistic ab initio calculations. Our results show that definitive signatures of Fermi arcs can be observed in existing and proposed Weyl semimetals using scanning tunneling spectroscopy.

cond-mat.mes-hall↗

arXiv2016

A PTAS for the Weighted Unit Disk Cover Problem

We are given a set of weighted unit disks and a set of points in Euclidean plane. The minimum weight unit disk cover (\UDC) problem asks for a subset of disks of minimum total weight that covers all given points. \UDC\ is one of the geometric set cover problems, which have been studied extensively for the past two decades (for many different geometric range spaces, such as (unit) disks, halfspaces, rectangles, triangles). It is known that the unweighted \UDC\ problem is NP-hard and admits a polynomial-time approximation scheme (PTAS). For the weighted \UDC\ problem, several constant approximations have been developed. However, whether the problem admits a PTAS has been an open question. In this paper, we answer this question affirmatively by presenting the first PTAS for \UDC. Our result implies the first PTAS for the minimum weight dominating set problem in unit disk graphs. Combining with existing ideas, our result can also be used to obtain the first PTAS for the maxmimum lifetime coverage problem and an improved constant approximation ratio for the connected dominating set problem in unit disk graphs.

cs.CG↗

arXiv2015

Three-dimensional graphene skeletons supported nickel molybdate nanowire composite as novel ultralight electrode for supercapacitors

Nickel molybdate (NiMoO$_{4}$) nanowires were prepared on chemical-vapor-deposition-grown three-dimensional graphene skeletons by hydrothermal method. The X-ray diffraction and Raman results show that NiMoO$_{4}$ is $α$ phase. This binder-free and ultralight graphene/ NiMoO$_{4}$ composite was used as a positive electrode for supercapacitors. This electrode presents a high specific capacitance of 1194 F g$^{-1}$ at 12 mA cm$^{-2}$ and the good stability with a cycling efficiency of 97.3% after 1000 cycles. Further, the energy density reaches an energy density of 41 Wh kg$^{-1}$ at a steady power density of 1319 W kg$^{-1}$. These results demonstrate the potential of the designed composite for the future flexible and lightweight energy storage.

cond-mat.mtrl-sci↗

arXiv2015

Optimal Construction of Regenerating Code through Rate-matching in Hostile Networks

Regenerating code is a class of code very suitable for distributed storage systems, which can maintain optimal bandwidth and storage space. Two types of important regenerating code have been constructed: the minimum storage regeneration (MSR) code and the minimum bandwidth regeneration (MBR) code. However, in hostile networks where adversaries can compromise storage nodes, the storage capacity of the network can be significantly affected. In this paper, we propose two optimal constructions of regenerating codes through rate-matching that can combat against this kind of adversaries in hostile networks: 2-layer rate-matched regenerating code and $m$-layer rate-matched regenerating code. For the 2-layer code, we can achieve the optimal storage efficiency for given system requirements. Our comprehensive analysis shows that our code can detect and correct malicious nodes with higher storage efficiency compared to the universally resilient regenerating code which is a straightforward extension of regenerating code with error detection and correction capability. Then we propose the $m$-layer code by extending the 2-layer code and achieve the optimal error correction efficiency by matching the code rate of each layer's regenerating code. We also demonstrate that the optimized parameter can achieve the maximum storage capacity under the same constraint. Compared to the universally resilient regenerating code, our code can achieve much higher error correction efficiency.

cs.IT↗

arXiv2015

Detection of Majorana Kramers pairs using a quantum point contact

We propose a setup that integrates a quantum point contact (QPC) and a Josephson junction on a quantum spin Hall sample, experimentally realizable in InAs/GaSb quantum wells. The confinement due to both the QPC and the superconductor results in a Kramers pair of Majorana zero-energy bound states when the superconducting phases in the two arms differ by an odd multiple of $π$ across the Josephson junction. We investigate the detection of these Majorana pairs with the integrated QPC, and find a robust switching from normal to Andreev scattering across the edges due to the presence of Majorana Kramers pairs. This transport signature is expected to be exhibited in measurements of differential conductance and/or current cross-correlation at low bias.

cond-mat.mes-hall↗

arXiv2015

Beyond the MDS Bound in Distributed Cloud Storage

Distributed storage plays a crucial role in the current cloud computing framework. After the theoretical bound for distributed storage was derived by the pioneer work of the regenerating code, Reed-Solomon code based regenerating codes were developed. The RS code based minimum storage regeneration code (RS-MSR) and the minimum bandwidth regeneration code (RS-MBR) can achieve theoretical bounds on the MSR point and the MBR point respectively in code regeneration. They can also maintain the MDS property in code reconstruction. However, in the hostile network where the storage nodes can be compromised and the packets can be tampered with, the storage capacity of the network can be significantly affected. In this paper, we propose a Hermitian code based minimum storage regenerating (H-MSR) code and a minimum bandwidth regenerating (H-MBR) code. We first prove that our proposed Hermitian code based regenerating codes can achieve the theoretical bounds for MSR point and MBR point respectively. We then propose data regeneration and reconstruction algorithms for the H-MSR code and the H-MBR code in both error-free network and hostile network. Theoretical evaluation shows that our proposed schemes can detect the erroneous decodings and correct more errors in hostile network than the RS-MSR code and the RS-MBR code with the same code rate. Our analysis also demonstrates that the proposed H-MSR and H-MBR codes have lower computational complexity than the RS-MSR/RS-MBR codes in both code regeneration and code reconstruction.

cs.CR↗

arXiv2015

New Field Model of Polymer/Nanoparticle Mixture-Realizing Discreteness in the Continuous Description

Field-theoretical method is efficient in predicting the assembling structures of polymeric systems. However, for the polymer/nanoparticle mixture, the continuous density description is not suitable to capture the realistic assembly of particles, especially when the size of particle is much larger than the polymer segment. Here, we developed a field-based model, in which the particles are eventually discrete and hence it can overcome the drawbacks of the conventional field descriptions, e.g., inadequate and crude treatment on the polymer-particle interface and the excluded-volume interaction. We applied the model to study the simplest system of nanoparticles immersed in dense homopolymer solution. Our model can address the depletion effect and interfacial interaction in a more delicate way. Insights into the enthalpic and/or entropic origin of the structural variation due to the competition between depletion and interfacial interaction are obtained. New phenomena such as depletion-enhanced bridging aggregation are observed in the case of strong interfacial attraction and large depletion length. This approach is readily extendable to studying more complex polymer-based nanocomposites or biology-related systems, such as dendrimer/drug encapsulation and membrane/particle assembly.

cond-mat.soft↗

arXiv2015

Brush in the bath of active particles: anomalous stretching of chains and distribution of particles

The interaction between polymer brush and colloidal particles has been intensively studied in the last two decades. Here we consider a flat chain-grafted substrate immersed in a bath of active particles. Simulations show that an increase in the self-propelling force causes an increase in the number of particles that penetrate into the brush. Anomalously, the particle density inside the main body of the brush eventually becomes higher than that outside the brush at very large self-propelling force. The grafted chains are further stretched due to the steric repulsion from the intruded particles. Upon the increase of the self-propelling force, distinct stretching behaviors of chains were observed for low and high grafting densities. Surprisingly, we found a weak descent of the end-to-end distance of chains for high grafting density and very large force which is reminiscent of the compression effect of a chain in the active bath.

cond-mat.soft↗

arXiv2015

Experimental quantum-walk revival with a time-dependent coin

We demonstrate a quantum walk with time-dependent coin bias. With this technique we realize an experimental single-photon one-dimensional quantum walk with a linearly-ramped time-dependent coin flip operation and thereby demonstrate two periodic revivals of the walker distribution. In our beam-displacer interferometer, the walk corresponds to movement between discretely separated transverse modes of the field serving as lattice sites, and the time-dependent coin flip is effected by implementing a different angle between the optical axis of half-wave plate and the light propagation at each step. Each of the quantum-walk steps required to realize a revival comprises two sequential orthogonal coin-flip operators, with one coin having constant bias and the other coin having a time-dependent ramped coin bias, followed by a conditional translation of the walker.

quant-ph↗

arXiv2015

Point transitivity, $Δ$-transitivity and multi-minimality

Let $(X, f)$ be a topological dynamical system and $\mathcal {F}$ be a Furstenberg family (a collection of subsets of $\mathbb{N}$ with hereditary upward property). A point $x\in X$ is called an $\mathcal {F}$-transitive point if for every non-empty open subset $U$ of $X$ the entering time set of $x$ into $U$, $\{n\in \mathbb{N}: f^{n}(x) \in U\}$, is in $\mathcal {F}$; the system $(X,f)$ is called $\mathcal {F}$-point transitive if there exists some $\mathcal {F}$-transitive point. In this paper, we first discuss the connection between $\mathcal {F}$-point transitivity and $\mathcal {F}$-transitivity, and show that weakly mixing and strongly mixing systems can be characterized by $\mathcal {F}$-point transitivity, completing results in [Transitive points via Furstenberg family, Topology Appl. 158 (2011), 2221--2231]. We also show that multi-transitivity, $Δ$-transitivity and multi-minimality can also be characterized by $\mathcal {F}$-point transitivity, answering two questions proposed by Kwietniak and Oprocha [On weak mixing, minimality and weak disjointness of all iterates, Erg. Th. Dynam. Syst., 32 (2012), 1661--1672].

math.DS↗

arXiv2015

Algorithms on Minimizing the Maximum Sensor Movement for Barrier Coverage of a Linear Domain

In this paper, we study the problem of moving $n$ sensors on a line to form a barrier coverage of a specified segment of the line such that the maximum moving distance of the sensors is minimized. Previously, it was an open question whether this problem on sensors with arbitrary sensing ranges is solvable in polynomial time. We settle this open question positively by giving an $O(n^2 \log n)$ time algorithm. For the special case when all sensors have the same-size sensing range, the previously best solution takes $O(n^2)$ time. We present an $O(n \log n)$ time algorithm for this case; further, if all sensors are initially located on the coverage segment, our algorithm takes $O(n)$ time. Also, we extend our techniques to the cycle version of the problem where the barrier coverage is for a simple cycle and the sensors are allowed to move only along the cycle. For sensors with the same-size sensing range, we solve the cycle version in $O(n)$ time, improving the previously best $O(n^2)$ time solution.

cs.CG↗

arXiv2015

Higher criticism: $p$-values and criticism

This paper compares the higher criticism statistic (Donoho and Jin [Ann. Statist. 32 (2004) 962-994]), a modification of the higher criticism statistic also suggested by Donoho and Jin, and two statistics of the Berk-Jones [Z. Wahrsch. Verw. Gebiete 47 (1979) 47-59] type. New approximations to the significance levels of the statistics are derived, and their accuracy is studied by simulations. By numerical examples it is shown that over a broad range of sample sizes the Berk-Jones statistics have a better power function than the higher criticism statistics to detect sparse mixtures. The applications suggested by Meinshausen and Rice [Ann. Statist. 34 (2006) 373-393], to find lower confidence bounds for the number of false hypotheses, and by Jeng, Cai and Li [Biometrika 100 (2013) 157-172], to detect copy number variants, are also studied.

math.ST↗

arXiv2015

Determining phase-space properties of the IHEP RFQ output beam using the RMS beam widths from wire-scanners

A beam line is built after the IHEP RFQ for halo study. To determine transverse emittance and ellipse parameters of the RFQ output beam, beam size data obtained from the first two of 14 wire scanners are employed. By using the transfer matrix method and the least square method, a set of linear equations were set up and solved. The solutions were then applied as initial beam parameters in multi-particle simulations to check the method of calculation. It is shown that difference between the simulated RMS beam size and the measured one at the measurement location is less than 7%, which is acceptable in our experiments.

physics.acc-ph↗

arXiv2015

Linear Time Approximation Schemes for Geometric Maximum Coverage

We study approximation algorithms for the following geometric version of the maximum coverage problem: Let P be a set of n weighted points in the plane. We want to place m a * b rectangles such that the sum of the weights of the points in P covered by these rectangles is maximized.For any fixed > 0, we present efficient approximation schemes that can find (1-ε)-approximation to the optimal solution.In particular, for m = 1, our algorithm runs in linear time O(n log( 1/ε)), improving over the previous result. For m > 1, we present an algorithm that runs in O(n/εlog(1/ε)+m(1/ε)^(O(min(sqrt(m),1/ε))) time.

cs.CG↗

arXiv2015

Diagnosing the burst influence upon accretion in the clocked burster GS 1826--238

Type-I X-ray bursts on the surface of a neutron star are a unique probe to the accretion in X-ray binary systems. However, we know little about the feedback of the burst emission upon accretion. Hard X-ray shortages and enhancements of the persistent emission at soft X-rays have been observed. To put these findings in context with the aim of understanding the possible mechanism underneath, we investigated 68 bursts seen by RXTE from the clocked burster GS 1826--238. We diagnosed jointly the burst influence at both soft and hard X-rays, and found that the observations can be described as the CompTT model with variable normalization, electron temperature and optical depth. Putting these results in a scenario of coronal Compton cooling via the burst emission would lead to a shortage of the cooling power, which may suggest that additional consideration like the influence of the burst on the corona formation should be accounted for as well.

astro-ph.HE↗