arXiv subjects

Jegon Lee

Publications and source records attributed to Jegon Lee.

6 recordsLinked to original sources

arXiv2025

Awakening catalytically active surface of BaRuO3 thin film for alkaline hydrogen evolution

The dynamic reconstruction of surfaces during electrochemical reactions plays a crucial role in determining the performance of electrocatalysts. However, because reconstructions occur at the atomic level, direct observation and elucidation of the underlying mechanism are challenging for conventional powder type catalysts with ill defined lattices. In this study, the catalytically active surface of 3C BaRuO3 (BRO) epitaxial thin films emerges upon the dynamic introduction of surface Ru clusters, for the alkaline hydrogen evolution reaction (HER). Based on the mass activity at overpotential 100 mV, the intrinsic HER performance increases dramatically from 0.11 to 7.72 A/mg immediately after the initial HER cycle and eventually saturates at 1.05 A/mg after continuous operation. The formation of Ru clusters on the catalyst surface, driven by selective Ba leaching under alkaline HER conditions, is observed experimentally. Density functional theory calculations demonstrate that HER activity increased with enhanced H* adsorption owing to the dynamic Ru6 cluster formation. A strategy for stabilizing the 'awakened' active surface of BRO is further proposed by validating that the atomic-scale control of the film thickness can effectively maintain the highly active state. This study offers fundamental insights into the design and stabilization of the highly active Ru-based electrocatalysts for the alkaline HER.

cond-mat.mtrl-sci↗

arXiv2021

Color of Copper/Copper oxide

Stochastic inhomogeneous oxidation is an inherent characteristic of copper (Cu), often hindering color tuning and bandgap engineering of oxides. Coherent control of the interface between metal and metal oxide remains unresolved. We demonstrate coherent propagation of an oxidation front in single-crystal Cu thin film to achieve a full-color spectrum for Cu by precisely controlling its oxide-layer thickness. Grain boundary-free and atomically flat films prepared by atomic-sputtering epitaxy allow tailoring of the oxide layer with an abrupt interface via heat treatment with a suppressed temperature gradient. Color tuning of nearly full-color RGB indices is realized by precise control of oxide-layer thickness; our samples covered ~50.4% of the sRGB color space. The color of copper/copper oxide is realized by the reconstruction of the quantitative yield color from oxide pigment (complex dielectric functions of Cu2O) and light-layer interference (reflectance spectra obtained from the Fresnel equations) to produce structural color. We further demonstrate laser-oxide lithography with micron-scale linewidth and depth through local phase transformation to oxides embedded in the metal, providing spacing necessary for semiconducting transport and optoelectronics functionality.

cond-mat.mtrl-sci↗

arXiv2021

Atomic structure of initial nucleation layer in hexagonal perovskite BaRuO$_3$ thin films

Hexagonal perovskites are an attractive group of materials due to their various polymorph phases and rich structure-property relationships. BaRuO3 (BRO) is a prototypical hexagonal perovskite, in which the electromagnetic properties are significantly modified depending on its atomic structure. Whereas thin-film epitaxy would vastly expand the application of hexagonal perovskites by epitaxially stabilizing various metastable polymorphs, the atomic structure of epitaxial hexagonal perovskites, especially at the initial growth stage, has rarely been investigated. In this study, we show that an intriguing nucleation behavior takes place during the initial stabilization of a hexagonal perovskite 9R BaRuO3 (BRO) thin film on a (111) SrTiO3 (STO) substrate. We use high-resolution high-angle annular dark field scanning transmission electron microscopy in combination with geometrical phase analysis to understand the local strain relaxation behavior. We find that nano-scale strained layers, composed of different RuO6 octahedral stacking, are initially formed at the interface, followed by a relaxed single crystal9R BRO thin film. Within the interface layer, hexagonal BROs are nucleated on the STO (111) substrate by both corner- and face-sharing. More interestingly, we find that the boundaries between the differently-stacked nucleation layers, i.e. heterostructural boundaries facilitates strain relaxation, in addition to the formation of conventional misfit dislocations evolving from homostructural boundaries. Our observations reveal an important underlying mechanism to understand the thin-film epitaxy and strain accommodation in hexagonal perovskites.

cond-mat.mtrl-sci↗

arXiv2021

Epitaxial stabilization of metastable 3C BaRuO3 thin film with ferromagnetic non-Fermi liquid phase

Thin films of perovskite Ruthenates of the general formula ARuO3 (A = Ca and Sr) are versatile electrical conductors for viable oxide electronics. They are also scientifically intriguing, as they exhibit non-trivial electromagnetic ground states depending on the A-site element. Among them, realization of the cubic perovskite (3C) BaRuO3 thin film has been a challenge so far, because the 3C phase is metastable with the largest formation energy among the various polymorph phases of BaRuO3. In this study, we successfully prepared 3C BaRuO3 thin films employing epitaxial stabilization. The 3C BaRuO3 thin films show itinerant ferromagnetism with a transition temperature of ~48 K and a non-Fermi liquid phase. The epitaxial stabilization of the 3C BaRuO3 further enabled us to make a standard comparison of perovskite Ruthenates thin films, thereby establishing the importance of the Ru-O orbital hybridization in understanding the itinerant magnetic system.

cond-mat.mtrl-sci↗

arXiv2021

Tuning magnetic and optical properties through strain in epitaxial LaCrO3 thin films

We report on the effect of epitaxial strain on magnetic and optical properties of perovskite LaCrO3 (LCO) single crystal thin films. Epitaxial LCO thin films are grown by pulsed laser deposition on proper choice of substrates to impose different strain states. A combined experimental and theoretical approach is used to demonstrate the direct correlation between lattice-strain and functional properties. The magnetization results show that the lattice anisotropy plays a critical role in controlling the magnetic behavior of LCO films. The strain induced tetragonality in the film lattice strongly affects the optical transitions and charge transfer gap in LCO. This study opens new possibilities to tailoring the functional properties of LCO and related materials by strain engineering in epitaxial growth.

cond-mat.mtrl-sci↗

arXiv2017

Tuning electromagnetic properties of SrRuO3 epitaxial thin films via atomic control of cation vacancies

Elemental defects in transition metal oxides is an important and intriguing subject that result in modifications in variety of physical properties including atomic and electronic structure, optical and magnetic properties. Understanding the formation of elemental vacancies and their influence on different physical properties is essential in studying the complex oxide thin films. In this study, we investigated the physical properties of epitaxial SrRuO3 thin films by systematically manipulating cation and/or oxygen vacancies, via changing the oxygen partial pressure (P(O2)) during the pulsed laser epitaxy (PLE) growth. Ru vacancies in the low-P(O2)-grown SrRuO3 thin films induce lattice expansion with the suppression of the ferromagnetic TC down to ~120 K. Sr vacancies also disturb the ferromagnetic ordering, even though Sr is not a magnetic element. Our results indicate that both A and B cation vacancies in an ABO3 perovskite can be systematically engineered via PLE, and the structural, electrical, and magnetic properties can be tailored accordingly.

cond-mat.mtrl-sci↗