A Vendor-Agnostic LiDAR Data Conversion System with Multi-Signal Detection and Multi-Format Output
LiDAR (Light Detection and Ranging) sensors capture the surrounding environment as dense 3D point clouds by measuring the time-of-flight of emitted laser pulses, making them foundational across autonomous vehicles, robotics, and large-scale mapping. PCAP (Packet Capture) files from these sensors are the starting point of most 3D perception pipelines, yet internal packet structures, UDP (User Datagram Protocol) port conventions and encoding schemes differ enough across manufacturers that no single tool reads them all. Ouster, Velodyne, Hesai, and Livox each require their own SDK (Software Development Kit), their own environment setup, and their own conversion workflow. Supporting all four means maintaining four disconnected pipelines with no shared infrastructure. The pipeline described here takes a raw PCAP as input and handles vendor identification automatically, scoring six independent file characteristics through a weighted multi-signal approach to determine the source sensor. C++ SDKs handle Ouster and Velodyne, while Hesai and Livox rely on Python-based dpkt parsing where no open source SDK exists. From there, a single command writes output to any of five industry-standard formats. We tested on real outdoor captures. Ouster peaks at 2.08M points per second, Velodyne at 1.47M, both running through native C++ packet decoding. Hesai and Livox land at 110K and 150K respectively, where Python-layer parsing introduces overhead that compounds under sustained load. The 8-10x gap held consistently across runs. Tested on a consumer-grade i3 with 8GB RAM, no vendor configuration required