arXiv subjects

Jared Maxson

Publications and source records attributed to Jared Maxson.

At least 19 recordsLinked to original sources

arXiv2026

Building a Start-to-End Model of the CESR Injector Linac

The CESR injector linac supplies positrons to the Cornell Electron Storage Ring in six stages: a thermionic cathode, a 150 kV DC gun, a prebuncher, four electron linac sections, a tungsten positron converter, and four positron linacs. We present a start-to-end model of the full chain, built in Python from open-source codes. WarpX is used for the space-charge-dominated cathode, gun, prebuncher, and electron linacs, Geant4 for positron production, and Impact-T for the positron linacs. The beam reaches the converter at 146 MeV and the recaptured positrons are accelerated to 250 MeV. Stage configurations are written in YAML to allow algorithmic adjustment by Xopt for ML optimization.

physics.acc-ph↗

arXiv2026

Monochromation of pulsed electron beams with terahertz radiation at a planar mirror

Exquisite control of electron beam energy is required for many electron spectroscopy and imaging applications. For both continuous and pulsed beams, the beam energy spread is fundamentally limited by the electron source, and is typically a sizable fraction of an electron-volt. In this paper, we present a means to reduce electron beam energy spread after emission to the level of a few 10s of meV rms using femtosecond photoemission and an interaction with laser-derived single- to few-cycle terahertz (THz) radiation. We show analytically and in particle tracking simulations that this interaction can remove energy spread stored in both the transverse and longitudinal degrees of freedom. We analytically formulate the limit of energy spread that this technique can achieve, and map the non-ideal affects arising at high frequencies. The interaction is mediated by the beam's passage through a mirror which is reflective to terahertz radiation but allows transmission of the majority of the electron beam (e.g. a wire mesh). This method then only requires beam current losses of a few tens of percent, far smaller than what is achieved in prism and slit-based electron monochromators.

physics.acc-ph↗

arXiv2025

Experimental Reconstruction of Source 4D Phase Space Without Prior Knowledge of Transfer Matrix

We experimentally demonstrate a method for reconstructing the transverse 4D phase space of an electron beam at the time of emission from downstream diagnostics of the 4D phase space. This method does not rely on detailed knowledge of the beamline transport, besides assuming that linearity and symplecticity are satisfied. We apply this method to measure the transverse position and momentum phase space of electrons emitted from a spatially-structured alkali-antimonide cathode. This method can uncover local correlations between emission location and momentum spread. We formulate this method analytically and investigate resolution limits.

physics.acc-ph↗

arXiv2025

ESPPU INPUT: C$^3$ within the "Linear Collider Vision"

The Linear Collider Vision calls for a Linear Collider Facility with a physics reach from a Higgs Factory to the TeV-scale with $e^+e^{-}$ collisions. One of the technologies under consideration for the accelerator is a cold-copper distributed-coupling linac capable of achieving high gradient. This technology is being pursued by the C$^3$ collaboration to understand its applicability to future colliders and broader scientific applications. In this input we share the baseline parameters for a C$^3$ Higgs-factory and the energy reach of up to 3 TeV in the 33 km tunnel foreseen under the Linear Collider Vision. Recent results, near-term plans and future R\&D needs are highlighted.

physics.acc-ph↗

arXiv2024

Emittance Minimization for Aberration Correction II: Physics-informed Bayesian Optimization of an Electron Microscope

Aberration-corrected Scanning Transmission Electron Microscopy (STEM) has become an essential tool in understanding materials at the atomic scale. However, tuning the aberration corrector to produce a sub-{\AA}ngstr\"om probe is a complex and time-costly procedure, largely due to the difficulty of precisely measuring the optical state of the system. When measurements are both costly and noisy, Bayesian methods provide rapid and efficient optimization. To this end, we develop a Bayesian approach to fully automate the process by minimizing a new quality metric, beam emittance, which is shown to be equivalent to performing aberration correction. In part I, we derived several important properties of the beam emittance metric and trained a deep neural network to predict beam emittance growth from a single Ronchigram. Here we use this as the black box function for Bayesian Optimization and demonstrate automated tuning of simulated and real electron microscopes. We explore different surrogate functions for the Bayesian optimizer and implement a deep neural network kernel to effectively learn the interactions between different control channels without the need to explicitly measure a full set of aberration coefficients. Both simulation and experimental results show the proposed method outperforms conventional approaches by achieving a better optical state with a higher convergence rate.

physics.ins-det↗

arXiv2024

Emittance Minimization for Aberration Correction I: Aberration correction of an electron microscope without knowing the aberration coefficients

Precise alignment of the electron beam is critical for successful application of scanning transmission electron microscopes (STEM) to understanding materials at atomic level. Despite the success of aberration correctors, aberration correction is still a complex process. Here we approach aberration correction from the perspective of accelerator physics and show it is equivalent to minimizing the emittance growth of the beam, the span of the phase space distribution of the probe. We train a deep learning model to predict emittance growth from experimentally accessible Ronchigrams. Both simulation and experimental results show the model can capture the emittance variation with aberration coefficients accurately. We further demonstrate the model can act as a fast-executing function for the global optimization of the lens parameters. Our approach enables new ways to quickly quantify and automate aberration correction that takes advantage of the rapid measurements possible with high-speed electron cameras. In part II of the paper, we demonstrate how the emittance metric enables rapid online tuning of the aberration corrector using Bayesian optimization.

physics.ins-det↗

arXiv2024

Harnessing Plasmonic Interference for Nanoscale Ultrafast Electron Sources

In this paper we demonstrate the use of plasmonic focusing in conjunction with non-linear photoemisison to develop geometrically flat nanoscale electron sources with less than 40 pm-rad root mean squared (rms) normalized transverse emittance. Circularly polarized light is incident on a gold Archimedean spiral structure to generate surface-plasmon-polaritons which interfere coherently at the center resulting in a 50 nm rms emisison area. Such a nanostructured flat surface enables simultaneous spatio-temporal confinement of emitted electrons at the nanometer and femtosecond level and can be used as an advanced electron source for high-repetition-rate ultrafast electron diffraction and microscopy experiments as well as next-generation of miniaturized particle accelerators.

physics.acc-ph↗

arXiv2022

Experimental characterization of photoemission from plasmonic nanogroove arrays

Metal photocathodes are an important source of high-brightness electron beams, ubiquitous in the operation of both large-scale accelerators and table-top microscopes. When the surface of a metal is nano-engineered with patterns on the order of the optical wavelength, it can lead to the excitation and confinement of surface plasmon polariton waves which drive nonlinear photoemission. In this work, we aim to evaluate gold plasmonic nanogrooves as a concept for producing bright electron beams for accelerators via nonlinear photoemission. We do this by first comparing their optical properties to numerical calculations from first principles to confirm our ability to fabricate these nanoscale structures. Their nonlinear photoemission yield is found by measuring emitted photocurrent as the intensity of their driving laser is varied. Finally, the mean transverse energy of this electron source is found using the solenoid scan technique. Our data demonstrate the ability of these cathodes to provide a tenfold enhancement in the efficiency of photoemission over flat metals driven with a linear process. We find that these cathodes are robust and capable of reaching sustained average currents over 100 nA at optical intensities larger than 2 GW/cm$^2$ with no degradation of performance. The emittance of the generated beam is found to be highly asymmetric, a fact we can explain with calculations involving the also asymmetric roughness of the patterned surface. These results demonstrate the use of nano-engineered surfaces as enhanced photocathodes, providing a robust, air-stable source of high average current electron beams with great potential for industrial and scientific applications.

physics.acc-ph↗

arXiv2022

Operation of Cs-Sb-O activated GaAs in a high voltage DC electron gun at high average current

Negative Electron Affinity (NEA) activated GaAs photocathodes are the most popular option for generating a high current (> 1 mA) spin-polarized electron beam. Despite its popularity, a short operational lifetime is the main drawback of this material. Recent works have shown that the lifetime can be improved by using a robust Cs-Sb-O NEA layer with minimal adverse effects. In this work, we operate GaAs photocathodes with this new activation method in a high voltage environment to extract a high current. We observed spectral dependence on the lifetime improvement. In particular, we saw a 45% increase in the lifetime at 780 nm for Cs-Sb-O activated GaAs compared to Cs-O activated GaAs.

physics.acc-ph↗

arXiv2022

C$^3$ Demonstration Research and Development Plan

C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C$^3$ is the main linac. This white paper presents the staged approach towards a facility to demonstrate C$^3$ technology with both Direct (source and main linac) and Parallel (beam delivery, damping ring, ancillary component) R&D. The white paper also includes discussion on the approach for technology industrialization, related HEP R&D activities that are enabled by C$^3$ R&D, infrastructure requirements and siting options.

physics.acc-ph↗

arXiv2021

Ultimate bunch length and emittance performance of an MeV ultrafast electron diffraction apparatus with a DC gun and a multi-cavity SRF linac

We present the design of a high repetition rate MeV energy ultrafast electron diffraction instrument based on a DC photoelectron gun and an SRF linac with multiple independently controlled accelerating and bunching cavities. The design is based on the existing Cornell photoinjector, which can readily be applied to the presented findings. Using particle tracking simulations in conjunction with multiobjective genetic algorithm optimization, we explore the smallest bunch lengths, emittance, and probe spot sizes achievable. We present results for both stroboscopic conditions (with single electrons per pulse) and with $10^5$ electrons/bunch which may be suitable for single-shot diffraction images. In the stroboscopic case, the flexibility provided by the many-cavity bunching and acceleration allows for longitudinal phase space linearization without a higher harmonic field, providing sub-fs bunch lengths at the sample. Given low emittance photoemission conditions, these small bunch lengths can be maintained with probe transverse sizes at the single micron scale and below. In the case of $10^5$ electrons per pulse, we simulate state-of the art 5D brightness conditions: rms bunch lengths of 10 fs with 3 nm normalized emittances, while now permitting repetition rates as high as 1.3 GHz. Finally, to aid in the design of new SRF-based UED machines, we simulate the trade-off between the number of cavities used and achievable bunch length and emittance.

physics.acc-ph↗

arXiv2020

Ultracold electrons via Near-Threshold Photoemission from Single-Crystal Cu(100)

Achieving a low mean transverse energy or temperature of electrons emitted from the photocathode-based electron sources is critical to the development of next-generation and compact X-ray Free Electron Lasers and Ultrafast Electron Diffraction, Spectroscopy and Microscopy experiments. In this paper, we demonstrate a record low mean transverse energy of 5 meV from the cryo-cooled (100) surface of copper using near-threshold photoemission. Further, we also show that the electron energy spread obtained from such a surface is less than 11.5 meV, making it the smallest energy spread electron source known to date: more than an order of magnitude smaller than any existing photoemission, field emission or thermionic emission based electron source. Our measurements also shed light on the physics of electron emission and show how the energy spread at few meV scale energies is limited by both the temperature and the vacuum density of states.

physics.acc-ph↗

arXiv2019

Improved lifetime of a high spin polarization superlattice photocathode

Negative Electron Affinity (NEA) activated surfaces are required to extract highly spin polarized electron beams from GaAs-based photocathodes, but they suffer extreme sensitivity to poor vacuum conditions that results in rapid degradation of quantum efficiency. We report on series of unconventional NEA activations on surfaces of bulk GaAs with Cs, Sb, and O2 using different methods of oxygen exposure for optimizing photocathode performance. One order of magnitude improvement in lifetime with respect to the standard Cs-O2 activation is achieved without significant loss on electron spin polarization and quantum efficiency by codepositing Cs, Sb, and O2. A strained GaAs/GaAsP superlattice sample activated with the codeposition method demonstrated similar enhancement in lifetime near the photoemission threshold while maintaining 90% spin polarization.

physics.app-ph↗

arXiv2018

Brightness of nonequilibrium photoemission in metallic photocathodes near threshold

The operation of photoemission electron sources with wavelengths near the photoemission threshold has been shown to dramatically decrease the minimum achievable photocathode emittance, but at the cost of significantly reduced quantum efficiency (QE). In this work, we show that for femtosecond laser and electron pulses, the increase in required laser intensities due to the low QE drives the photocathode electronic distribution far from static equilibrium. We adapt an existing dynamic model of the electron occupation under high intensity laser illumination to predict the time-dependent effects of the nonequilibrium electron distribution on the QE, mean transverse energy (MTE), and emission brightness of metal phtocathodes. We find that multiphoton photoemission dramatically alters the MTE as compared to thermal equilibrium models, causing the MTE to no longer be a monotonic function of photon excess energy.

physics.acc-ph↗

arXiv2017

Relativistic electron beam acceleration in a zero-slippage terahertz-driven Inverse Free Electron Laser scheme

THz radiation promises breakthrough advances in compact advanced accelerators due to the high frequency and GV/m fields achievable, orders of magnitude larger than in conventional radiofrequency (RF) based accelerators. Compared to laser-driven schemes, the large phase acceptances of THz-driven accelerators are advantageous for operation with sizable charge. Despite burgeoning research, THz sources, particularly laser-based ones, cannot yet compete with the efficiency of RF amplifiers for high average current accelerators. Nevertheless, THz-based phase space manipulation is of immediate interest for a variety of applications, including generation and diagnostics of ultrashort bunches for electron diffraction/microscopy and compact free-electron laser applications. The challenge of maintaining overlap and synchronism between an electron beam and short laser-generated THz pulse has so far limited interactions to the few mm scale. We discuss a novel scheme for simultaneous group and phase velocity matching of nearly single-cycle THz radiation with a relativistic electron beam for meter-scale interaction. We demonstrate energy modulations of up to 150 keV using modest THz pulse energies (up to 1 uJ). We apply this large and efficient energy exchange for beam compression and time-stamping of a relativistic beam, paving the way towards realizing the unique opportunities enabled by laser-based THz accelerators.

physics.acc-ph↗

arXiv2016

Direct measurement of sub-10 fs relativistic electron beams with ultralow emittance

Ultralow emittance ($\leq20$ nm, normalized) electron beams with $10^5$ electrons per bunch are obtained by tightly focusing an ultrafast ($\sim$ 100 fs) laser pulse on the cathode of a 1.6 cell radiofrequency photoinjector. Taking advantage of the small initial longitudinal emittance, a downstream velocity bunching cavity is used to compress the beam to $<10$ fs rms bunch length. The measurement is performed using a thick high voltage deflecting cavity which is shown to be well-suited to measure ultrashort durations of bunching beams, provided that the beam reaches a ballistic longitudinal focus at the cavity center.

physics.acc-ph↗

arXiv2013

Demonstration of Low Emittance in the Cornell Energy Recovery Linac Injector Prototype

We present a detailed study of the six-dimensional phase space of the electron beam produced by the Cornell Energy Recovery Linac Photoinjector, a high-brightness, high repetition rate (1.3 GHz) DC photoemission source designed to drive a hard x-ray energy recovery linac (ERL). A complete simulation model of the injector has been constructed, verified by measurement, and optimized. Both the horizontal and vertical 2D transverse phase spaces, as well as the time-resolved (sliced) horizontal phase space, were simulated and directly measured at the end of the injector for 19 pC and 77 pC bunches at roughly 8 MeV. These bunch charges were chosen because they correspond to 25 mA and 100 mA average current if operating at the full 1.3 GHz repetition rate. The resulting 90% normalized transverse emittances for 19 (77) pC/bunch were 0.23 +/- 0.02 (0.51 +/- 0.04) microns in the horizontal plane, and 0.14 +/- 0.01 (0.29 +/- 0.02) microns in the vertical plane, respectively. These emittances were measured with a corresponding bunch length of 2.1 +/- 0.1 (3.0 +/- 0.2) ps, respectively. In each case the rms momentum spread was determined to be on the order of 1e-3. Excellent overall agreement between measurement and simulation has been demonstrated. Using the emittances and bunch length measured at 19 pC/bunch, we estimate the electron beam quality in a 1.3 GHz, 5 GeV hard x-ray ERL to be at least a factor of 20 times better than that of existing storage rings when the rms energy spread of each device is considered. These results represent a milestone for the field of high-brightness, high-current photoinjectors.

physics.acc-ph↗

arXiv2013

Fundamental Photoemission Brightness Limit from Disorder Induced Heating

We determine the limit of the lowest achievable photoemitted electron temperature, and therefore the maximum achievable electron brightness, due to heating just after emission into vacuum, applicable to dense relativistic or nonrelativistic photoelectron beams. This heating is due to poorly screened Coulomb interactions equivalent to disorder induced heating seen in ultracold neutral plasmas. We first show that traditional analytic methods of Coulomb collisions fail for the calculation of this strongly coupled heating. Instead, we employ an N-body tree algorithm to compute the universal scaling of the disorder induced heating in fully contained bunches, and show it to agree well with a simple model utilizing the tabulated correlated energy of one component plasmas. We also present simulations for beams undergoing Coulomb explosion at the photocathode, and demonstrate that both the temperature growth and subsequent cooling must be characterized by correlated effects, as well as correlation-frozen dynamics. In either case, the induced temperature is found to be of several meV for typical photoinjector beam densities, a significant fraction of the intrinsic beam temperature of the coldest semiconductor photocathodes. Thus, we expect disorder induced heating to become a major limiting factor in the next generation of photoemission sources delivering dense bunches and employing ultra-cold photoemitters.

physics.acc-ph↗