arXiv Science⌕ Search

arXiv subjects

Jan Vorberger

Publications and source records attributed to Jan Vorberger.

At least 19 recordsLinked to original sources
arXiv2026

Nonempirical Time-Dependent Density Functional Theory Framework for Nonlocal Exchange--Correlation Potentials

Advanced, orbital-dependent exchange--correlation (XC) functionals can significantly improve the description of electronic structural properties, but they substantially worsen spectral properties that are computed within standard linear-response time-dependent density functional theory frameworks. This is not a failure of the underlying Kohn-Sham states, but due to a formal inconsistency in the treatment of the dynamic density response when the non-locality of the XC potential is not taken into account consistently on the level of the full off-diagonal density matrix. To avoid these complexities, we present a non-empirical additive correction $Δf_\textnormal{xc}(\mathbf{q},ω)$ to the dynamic XC kernel that re-enforces the exact f-sum rule of the non-local KS Hamiltonian within TDDFT. Comparing our new results against a representative set of accurate experimental measurements (ambient aluminum, silicon and carbon, as well as heated and compressed aluminum) reveals a dramatic improvement in all cases without any additional computational cost. The corresponding extension to the open-source GPAW code is made freely available online. We further investigate the implications of non-local pseudopotentials and show that the non-locality has an important, physically motivated effect that is indispensable to capture the correct plasmon dispersion in lieu of full all-electron simulations. In addition to being important for the estimation of a plethora of dynamic and spectral properties, our work constitutes an important step towards a universal XC functional that can be used to estimate all kinds of observables with high accuracy. Finally, we outline the potential utility of our framework for the development of advanced non-local XC functionals, and suggest a new way to rigorously verify non-local pseudopotentials against experimental measurements of collective excitations.

cond-mat.mtrl-sci↗
arXiv2026

Monte-Carlo Event Generation for X-Ray Thomson Scattering Analysis

A key diagnostic in warm-dense matter (WDM) experiments is X-ray Thomson scattering (XRTS), but its interpretation is often limited by complex instrument effects and the high computationally expensive combinations of microscopic models with detector simulations. We present a proof-of-principle implementation of an event-driven approach to XRTS modelling, inspired by particle physics event-generators. Instead of computing the spectra via forward models, individual scattering events are sampled from the differential cross section and sent through a spectrometer simulation. This provides a statistically consistent representation that preserves full kinematic information and enables flexible and geometry-aware analysis. We demonstrate the feasibility and physical consistency of the method for non-resonant XRTS in a synthetic setup. By decoupling event generation from detector-level analysis, the framework allows efficient reuse of the sampled events and reduces computational overhead associated with repeated evaluations. The method is model-agnostic and establishes a new connection between particle-physics event generation techniques and WDM diagnostics, providing a scalable foundation for advanced XRTS analysis and inference.

hep-ph↗
arXiv2026

Reconciling chemical models of X-ray Thomson Scattering with the Bethe $f$-sum rule

X-ray Thomson scattering (XRTS) is a key diagnostic for high-energy-density plasmas, which can exhibit significant quantum effects even at elevated temperatures. XRTS experiments are commonly interpreted using the Chihara decomposition, that was derived in the chemical picture and, thus, separates contributions from bound and free electrons. Despite being the de-facto standard for analysing measurements, a well-known shortcoming is that the standard bound-state treatment in the form of the impulse approximation fails to satisfy fundamental theoretical constraints, most notably the Bethe $f$-sum rule (BFSR). The problem arises due to the usage of plane waves in the impulse approximation as well as non-negligible contributions from bound-bound transitions. In this work, we present a minimal analytical extension of the Chihara decomposition of the dynamic structure factor for matter in the ground state, using hydrogenic bound-free and bound-bound transitions. We demonstrate that compliance with the BFSR is only achieved when both bound-bound transitions are explicitly included and an exact treatment of the bound-free contribution is applied. Finally, detector ray-tracing simulations for atomic hydrogen demonstrate experimentally detectable deviations from the standard Chihara model. The model will be made available in the open source XRTS library xDAVE [Bellenbaum et al., Phys. Plasmas (in print), arxiv:2604.27237].

physics.plasm-ph↗
arXiv2026

Ab initio path integral Monte Carlo study of the 2D uniform electron liquid at finite temperatures

We present extensive \emph{ab initio} path integral Monte Carlo (PIMC) simulations of the two-dimensional uniform electron gas (2DEG), covering a broad range of density parameters $r_s=0.1,\dots,50$ and temperatures $Θ=k_\textnormal{B}T/E_\textnormal{Fermi}=0.5,\dots,16$. This allows us to analyze various structural, linear density response and spectral properties. We find clear evidence of a \emph{roton-type} feature in the dynamic structure factor at strong coupling and intermediate wavenumbers. We also benchmark novel dielectric theory implementations for the 2DEG~[Kalkavouras \emph{et al.}~arXiv:2601.14989] for structural and spectral properties across the liquid phase diagram. The PIMC results can be used to benchmark existing theories and approximations, and guide the development of new methodologies.

cond-mat.quant-gas↗
arXiv2026

Kinetic energy from the cubic sum rule of the dynamic structure factor

The third frequency moment sum rule of the dynamic structure factor $S(\mathbf{q},ω)$ is explored for the first time as an alternative estimator of the kinetic energy $K$ of quantum many-body systems. As a practical example, the uniform electron gas at warm dense matter conditions is considered. First, $K$ is extracted from quasi-exact \emph{ab initio} path integral Monte Carlo results for the imaginary-time density--density correlation function $F(\mathbf{q},τ)$ and the expected excellent self-consistency with the thermodynamic differentiation route is confirmed. Second, $K$ is extracted from approximate dielectric formalism results for $S(\mathbf{q},ω)$ and it is observed that common semi-classical approximations lead to a wave-number dependent $K$ with an incorrect short-wavelength limit. Our results are expected to be of broad interest for a great variety of applications, including time-dependent density functional theory, dielectric formalism schemes and warm dense matter models, as well as for the design of dedicated x-ray Thomson scattering experiments with the potential to provide model-free access to the full electronic equation of state.

physics.plasm-ph↗
arXiv2026

Overview of X-ray Thomson scattering measurements of extreme states of matter

Since its first successful applications in the early 2000s, x-ray Thomson scattering (XRTS) has emerged as one of the most successful tools for the diagnostics of extreme states of matter in the laboratory. By sampling the dynamic structure factor of the electrons, XRTS is capable of giving detailed insights into the atomic-scale physics of the matter probed. Moreover, thermodynamic parameters, like the mass density, temperature, and ionization state, are routinely inferred from XRTS measurements, providing a comprehensive characterization of the sample probed. In addition, the dynamic structure factor is of considerable interest in its own right as it contains information on other effects such as the plasmon shift, miscibility between species, electronic states and potential transitions between these states. In this work, we provide an extensive overview of previous XRTS experiments at both traditional laser and X-ray free electron laser facilities, including information about the probed material (elements, conditions), scattering geometry, analysis methods as well as corresponding references. In addition, we briefly discuss the advantages and shortcomings of widely used analysis methods for XRTS spectra and reflect on upcoming future developments in XRTS experiments and theory.

physics.plasm-ph↗
arXiv2026

X-Ray Diagnostics Analysis Verification and Exploration (xDAVE) Code for the Prediction and Interpretation of X-Ray Thomson Scattering Experiments

X-ray Thomson scattering (XRTS) is a common diagnostic used in the warm dense matter (WDM) regime to estimate plasma parameters like density, temperature and charge state. Experimental analysis typically relies on a forward model to obtain estimates for these parameters, as the measured spectrum is a convolution of the dynamic structure factor (DSF) and the source-instrument function. The Chihara decomposition, where the spectrum is separated into contributions from bound and free electrons, is commonly used to estimate DSFs in the WDM regime, as it allows for the fast calculation of DSFs and therefore can easily be applied in a large-scale parameter optimization. Due to the limited availability of XRTS codes, in this work we present the ``\textbf{X}-ray \textbf{D}iagnostics, \textbf{A}nalysis, \textbf{V}erification and \textbf{E}xploration`` (\texttt{xDAVE}) code, designed to quickly estimate DSFs using the Chihara decomposition and analyse experimental spectra. The code is validated by re-analysing an experiment with isochorically heated beryllium at the OMEGA Laser Facility. In addition, we demonstrate the applicability of the code to plan experiments and predict scattering spectra through the coupling to a ray-tracing code. Lastly, the importance of accounting for the energy-dependence of spectrometer instrument functions is demonstrated by comparing ray-tracing simulations to the standard convolution for strongly compressed Beryllium shots at the National Ignition Facility similar to previously published results.

physics.plasm-ph↗
arXiv2026

Model-free interpretation of X-ray Thomson scattering measurements

X-ray Thomson scattering (XRTS) has emerged as a widely used diagnostics for extreme states of matter in a great variety of situations, and over a broad range of parameters. The standard approach for the interpretation of XRTS measurements is given by the forward modeling approach, where the electronic dynamic structure factor $S_{ee}(\mathbf{q},ω)$ is computed from a suitable theoretical model, convolved with the combined source-and-instrument function, and then matched with the experimental observation, treating a-priori unknown parameters such as the mass density, temperature and ionization state as free fit parameters. Very recently, it has been suggested that this inherent model dependence can be avoided by analyzing XRTS spectra in terms of the imaginary-time correlation function (ITCF) $F_{ee}(\mathbf{q},τ)$ [Dornheim \textit{et al.}, \textit{Nature Commun.}~\textbf{13}, 7911 (2022)], giving one model-free access to the temperature, normalization, Rayleigh weight, as well as a number of other properties. Here, we present a comprehensive review article on these developments, including accessible discussions of the method's theoretical background in terms of Feynman's imaginary-time path integral picture of statistical mechanics as well as its remaining limitations, in particular with respect to the source-and-instrument function of the experimental set-up. In addition, we discuss new chances for the further development of this framework by utilizing emerging capabilities for high-repetition XRTS experiments with meV resolution over spectral ranges of tens of eV at state-of-the-art x-ray free electron laser (XFEL) facilities such as the European XFEL in Germany.

physics.plasm-ph↗
arXiv2026

Reweighting Estimators for Density Response in Path Integral Monte Carlo: Applications to linear, nonlinear and cross-species density response

We present density response estimators for Monte Carlo simulations that are based on a reweighting procedure, where the samples of an unperturbed system are used to estimate the properties of a system perturbed by an external harmonic potential. This allows the linear and nonlinear static density response to be estimated purely from simulations of the unperturbed system. The method is demonstrated for the uniform electron gas under warm dense matter and strongly coupled conditions using ab initio path integral Monte Carlo simulations. The performance of the method with respect to the number of particles and the number of imaginary time slices is investigated. The scheme is generalised to consider multiple external perturbations, acting on different species and with different wavenumbers, giving one access to additional cross-species density response functions and the complete quadratic response function resolved for both wave number arguments through mode coupling. The flexibility of the methodology opens the possibility to investigate numerous new density response properties to further advance our understanding of interacting quantum many-body systems across a broad range of applications.

physics.chem-ph↗
arXiv2026

Probing ultrafast heating and ionization dynamics in solid density plasmas with time-resolved resonant X-ray absorption and emission

Heating and ionization are among the most fundamental processes in relativistic laser--solid interactions; however, their spatiotemporal evolution remains challenging to capture experimentally. Here we present detailed diagnosis of high-intensity laser interactions with wire targets, leveraging the extreme spectral brightness of an X-ray free-electron laser in sub-picosecond time-resolved resonant X-ray emission spectroscopy and absorption imaging. Experimental results are compared with comprehensive simulations using atomic collisional--radiative models, particle-in-cell, and magnetohydrodynamics codes to elucidate the underlying physics. These multi-scale simulations reveal extreme sensitivity of basic plasma parameters with widely used models, such as temperature and ionization depth, which are able to be constrained by incorporating a detailed accounting of laser spatial profiles, pre-plasma conditions, and collisional processes. These results provide new insights into heating and ionization dynamics in the high-energy-density regime relevant to inertial fusion energy research, both as an experimental platform for accessing theoretically challenging conditions and as a benchmark for improving models of high-power laser--plasma interactions.

physics.plasm-ph↗
arXiv2026

Mermin's dielectric function and the f-sum rule

Mermin's dielectric function [N.D. Mermin, Phys. Rev. B 1, 2362 (1970)] is widely assumed to satisfy the f-sum rule because he constrains his ansatz with the continuity equation. However, we identify a moment-closure problem in Mermin's use of the continuity equation. Further, we show that the Mermin's model can be derived without invoking continuity. We describe how other approaches such as the ``completed Mermin'' model of Chuna and Murillo [Phys. Rev. E 111, 035206 (2025)] remedy this closure issue. We then inspect the f-sum rule for both the original and completed Mermin models and find for the Mermin ansatz that collision frequencies scaling as $ω$ must violate the f-sum rule, whereas constant, real, positive collision frequencies will satisfy it, with the caveat that, in practice, convergence with respect to the upper integration limit $ω_{\max}$ is sufficiently slow that finite-domain numerical evaluations exhibit apparent violations, regardless of wavenumber $q$. We also find that collision frequencies with constant imaginary components cause f-sum rule violations. We conclude that if Mermin's model is fit to data via optimizing its collision frequency, then the f-sum rule is not inherently satisfied; constraints, though broad, are needed in order to assume the f-sum rule is satisfied. Further, if the f-sum rule is theoretically satisfied, but violations still appear, then these deviations ought to be included in the error estimates.

cond-mat.stat-mech↗
arXiv2026

Spectral Deconvolution without the Deconvolution: Extracting Temperature from X-ray Thomson Scattering Spectra without the Source-and-Instrument Function

X-ray Thomson scattering (XRTS) probes the dynamic structure factor of the system, but the measured spectrum is broadened by the combined source-and-instrument function (SIF) of the setup. In order to extract properties such as temperature from an XRTS spectrum, the broadening by the SIF needs to be removed. Recent work [Dornheim et al. Nature Commun. 13, 7911 (2022)] has suggested that the SIF may be deconvolved using the two-sided Laplace transform. However, the extracted information can depend strongly on the shape of the input SIF, and the SIF is in practice challenging to measure accurately. Here, we propose an alternative approach: we demonstrate that considering ratios of Laplace-transformed XRTS spectra collected at different scattering angles is equivalent to performing the deconvolution, but without the need for explicit knowledge of the SIF. From these ratios, it is possible to directly extract the temperature from the scattering spectra, when the system is in thermal equilibrium. We find the method to be generally robust to spectral noise and physical differences between the spectrometers, and we explore situations in which the method breaks down. Furthermore, the fact that consistent temperatures can be extracted for systems in thermal equilibrium indicates that non-equilibrium effects could be identified by inconsistent temperatures of a few eV between the ratios of three or more scattering angles.

physics.plasm-ph↗
arXiv2026

Enhancing the Efficiency of Time-Dependent Density Functional Theory Calculations of Dynamic Response Properties

X-ray Thomson scattering (XRTS) constitutes an essential technique for diagnosing material properties under extreme conditions, such as high pressures and intense laser heating. Time-dependent density functional theory (TDDFT) is one of the most accurate available ab initio methods for modeling XRTS spectra, as well as a host of other dynamic material properties. However, strong thermal excitations, along with the need to account for variations in temperature and density as well as the finite size of the detector significantly increase the computational cost of TDDFT simulations compared to ambient conditions. In this work, we present a broadly applicable method for optimizing and enhancing the efficiency of TDDFT calculations. Our approach is based on a one-to-one mapping between the dynamic structure factor and the imaginary time density--density correlation function, which naturally emerges in Feynman's path integral formulation of quantum many-body theory. Specifically, we combine rigorous convergence tests in the imaginary time domain with a constraints-based attenuation of narrow-band fluctuations to improve the efficiency of TDDFT modeling without the introduction of any significant bias. As a result, we can report a speed-up by up to an order of magnitude, thus substantially reducing the burden of computational cost required for XRTS analysis.

cond-mat.mtrl-sci↗
arXiv2026

Roadmap for warm dense matter physics

This roadmap presents the state-of-the-art, current challenges and near future developments anticipated in the thriving field of warm dense matter physics. Originating from strongly coupled plasma physics, high pressure physics and high energy density science, the warm dense matter physics community has recently taken a giant leap forward. This is due to spectacular developments in laser technology, diagnostic capabilities, and computer simulation techniques. Only in the last decade has it become possible to perform accurate enough simulations \& experiments to truly verify theoretical results as well as to reliably design experiments based on predictions. Consequently, this roadmap discusses recent developments and contemporary challenges that are faced by theoretical methods, and experimental techniques needed to create and diagnose warm dense matter. A large part of this roadmap is dedicated to specific warm dense matter systems and applications in astrophysics, inertial confinement fusion and novel material synthesis.

physics.plasm-ph↗
arXiv2026

Van-der-Waals exchange-correlation functionals and their high pressure and warm dense matter applications

We investigate basic hydrogen quantities like the molecular bond length, the molecular dissociation energy and the van-der-Waals interaction in idealized situations in an effort to discern a suitable exchange-correlation functional for the molecular to metal transition in warm dense hydrogen. The best reproduction of bond length and dissociation energy is given by the r2SCAN functional, several vdW functionals and also HSE06 fair qualitatively and quantitatively no better than PBE or worse. In addition we investigate quantities like the static and dynamic ion structure factor, and the electronic DOS to determine differences between exchange-correlation functionals with and without van-der-Waals corrections in the transition region from the molecular to the metallic regime of hydrogen.

physics.chem-ph↗
arXiv2026

Generalized density functional theory framework for the non-linear density response of quantum many-body systems

A density functional theory (DFT) framework is presented that links functional derivatives of free-energy functionals to non-linear static density response functions in quantum many-body systems. Within this framework, explicit expressions are derived for various higher-order response functions of systems that are homogeneous on average, including the first theoretical result for the cubic response at the first harmonic $χ_0^{(1,3)}(\vec{q})$. Specifically, our framework includes hitherto neglected mode-coupling effects that are important for the non-linear density response even in the presence of a single harmonic perturbation. We compare these predictions for $χ_0^{(1,3)}(\vec{q})$ to new Kohn-Sham DFT simulations, leading to excellent agreement between theory and numerical results. Exact analytical expressions are also obtained for the long-wavelength limits of the ideal quadratic and cubic response functions. Particular emphasis is placed on the connections between the third- and fourth-order functional derivatives of the non-interacting free-energy functional $F_s[n]$ and the ideal quadratic and cubic response functions of the uniform electron gas, respectively. These relations provide exact constraints that may prove useful for the future construction of improved approximations to $F_s[n]$, in particular for warm dense matter applications at finite temperatures. Here, we use this framework to assess several commonly employed approximations to $F_s[n]$ through orbital-free DFT simulations of the harmonically perturbed ideal electron gas. The results are compared with Kohn-Sham DFT calculations across temperatures ranging from the ground state to the warm dense regime. Additionally, we analyze in detail the temperature- and wavenumber-dependent non-monotonic behavior of the ideal quadratic and cubic response functions.

cond-mat.stat-mech↗
arXiv2026

Unlocking the Power of Orbital-Free Density Functional Theory to Explore the Electronic Structure Under Extreme Conditions

Recent advances in X-ray free-electron laser diagnostics have enabled direct probing of the electronic structure under extreme pressures and temperatures, such as those encountered in stellar interiors and inertial confinement fusion experiments, challenging theoretical models for interpreting experimental data. Kohn-Sham density functional theory (KSDFT) has been successfully applied to analyze experimental X-ray scattering measurements, but its high computational cost renders routine application impractical. Orbital-free DFT (OFDFT) is a substantially more efficient alternative, with computational cost scaling linearly with system size and a weak temperature dependence, yet it often lacks the accuracy required for electronic structure description. Overcoming this limitation, we present a non-empirical Kohn-Sham-assisted orbital-free density functional framework for calculations at extreme conditions, which enables efficient OFDFT simulations with KSDFT-level accuracy for electron densities, electron-ion structure factors, and equations of state across a broad range of conditions. Benchmark comparisons with quantum Monte Carlo data for dense hydrogen and validation against Rayleigh weight measurements of hot dense beryllium demonstrate the reliability of the framework and speedups of up to several hundred times compared with KSDFT. We further show that even at temperatures on the order of 100 eV, quantum non-locality remains essential for correctly describing the electronic structure of dense hydrogen.

cond-mat.mtrl-sci↗
arXiv2026

Ab initio path-integral Monte Carlo results for the one-particle spectral function of the warm dense electron gas

We compute quasi-exact \emph{ab initio} path-integral Monte Carlo results for the Matsubara Green's function of the uniform electron gas (UEG) at finite temperature over a broad range of coupling strengths ($r_s=1,\dots,10)$. This allows us to present approximation-free results for the static self-energy $Σ_\infty(p)$ and spectral function $A(p,ω)$, and to benchmark previous approximate results for the UEG. In addition, our work opens up intriguing avenues to study the single-particle spectrum and density of states of real warm dense matter systems based on truly first principles.

cond-mat.quant-gas↗