arXiv subjects

James Larkin

Publications and source records attributed to James Larkin.

18 recordsLinked to original sources

arXiv2024

A Bayesian hierarchical mixture cure modelling framework to utilize multiple survival datasets for long-term survivorship estimates: A case study from previously untreated metastatic melanoma

Time to an event of interest over a lifetime is a central measure of the clinical benefit of an intervention used in a health technology assessment (HTA). Within the same trial, multiple end-points may also be considered. For example, overall and progression-free survival time for different drugs in oncology studies. A common challenge is when an intervention is only effective for some proportion of the population who are not clinically identifiable. Therefore, latent group membership as well as separate survival models for identified groups need to be estimated. However, follow-up in trials may be relatively short leading to substantial censoring. We present a general Bayesian hierarchical framework that can handle this complexity by exploiting the similarity of cure fractions between end-points; accounting for the correlation between them and improving the extrapolation beyond the observed data. Assuming exchangeability between cure fractions facilitates the borrowing of information between end-points. We undertake a comprehensive simulation study to evaluate the model performance under different scenarios. We also show the benefits of using our approach with a motivating example, the CheckMate 067 phase 3 trial consisting of patients with metastatic melanoma treated with first line therapy.

stat.AP↗

arXiv2021

The Infrared Imaging Spectrograph (IRIS) for TMT: final software design update

The InfraRed Imaging Spectrograph (IRIS) is the first-light client instrument for the Narrow Field Infrared Adaptive Optics System (NFIRAOS) on the Thirty Meter Telescope (TMT). Now approaching the end of its final design phase, we provide an overview of the instrument control software. The design is challenging since IRIS has interfaces with many systems at different stages of development (e.g., NFIRAOS, telescope control system, observatory sequencers), and will be built using the newly-developed TMT Common Software (CSW), which provides framework code (Java/Scala), and services (e.g., commands, telemetry). Lower-level software will be written in a combination of Java and C/C++ to communicate with hardware, such as motion controllers and infrared detectors. The overall architecture and philosophy of the IRIS software is presented, as well as a summary of the individual software components and their interactions with other systems.

astro-ph.IM↗

arXiv2018

The infrared imaging spectrograph (IRIS) for TMT: electronics-cable architecture

The InfraRed Imaging Spectrograph (IRIS) is a first-light instrument for the Thirty Meter Telescope (TMT). It combines a diffraction limited imager and an integral field spectrograph. This paper focuses on the electrical system of IRIS. With an instrument of the size and complexity of IRIS we face several electrical challenges. Many of the major controllers must be located directly on the cryostat to reduce cable lengths, and others require multiple bulkheads and must pass through a large cable wrap. Cooling and vibration due to the rotation of the instrument are also major challenges. We will present our selection of cables and connectors for both room temperature and cryogenic environments, packaging in the various cabinets and enclosures, and techniques for complex bulkheads including for large detectors at the cryostat wall.

astro-ph.IM↗

arXiv2018

The Infrared Imaging Spectrograph (IRIS) for TMT: closed-loop adaptive optics while dithering

The InfraRed Imaging Spectrograph (IRIS) is the first-light client instrument for the Narrow Field Infrared Adaptive Optics System (NFIRAOS) on the Thirty Meter Telescope (TMT). IRIS includes three natural guide star (NGS) On-Instrument Wavefront Sensors (OIWFS) to measure tip/tilt and focus errors in the instrument focal plane. NFIRAOS also has an internal natural guide star wavefront sensor, and IRIS and NFIRAOS must precisely coordinate the motions of their wavefront sensor positioners to track the locations of NGSs while the telescope is dithering (offsetting the telescope to cover more area), to avoid a costly re-acquisition time penalty. First, we present an overview of the sequencing strategy for all of the involved subsystems. We then predict the motion of the telescope during dithers based on finite-element models provided by TMT, and finally analyze latency and jitter issues affecting the propagation of position demands from the telescope control system to individual motor controllers.

astro-ph.IM↗

arXiv2018

The Infrared Imaging Spectrograph (IRIS) for TMT: advancing the data reduction system

Infrared Imaging Spectrograph (IRIS) is the first light instrument for the Thirty Meter Telescope (TMT) that consists of a near-infrared (0.84 to 2.4 micron) imager and integral field spectrograph (IFS) which operates at the diffraction-limit utilizing the Narrow-Field Infrared Adaptive Optics System (NFIRAOS). The imager will have a 34 arcsec x 34 arcsec field of view with 4 milliarcsecond (mas) pixels. The IFS consists of a lenslet array and slicer, enabling four plate scales from 4 mas to 50 mas, multiple gratings and filters, which in turn will operate hundreds of individual modes. IRIS, operating in concert with NFIRAOS will pose many challenges for the data reduction system (DRS). Here we present the updated design of the real-time and post-processing DRS. The DRS will support two modes of operation of IRIS: (1) writing the raw readouts sent from the detectors and performing the sampling on all of the readouts for a given exposure to create a raw science frame; and (2) reduction of data from the imager, lenslet array and slicer IFS. IRIS is planning to save the raw readouts for a given exposure to enable sophisticated processing capabilities to the end users, such as the ability to remove individual poor seeing readouts to improve signal-to-noise, or from advanced knowledge of the point spread function (PSF). The readout processor (ROP) is a key part of the IRIS DRS design for writing and sampling of the raw readouts into a raw science frame, which will be passed to the TMT data archive. We discuss the use of sub-arrays on the imager detectors for saturation/persistence mitigation, on-detector guide windows, and fast readout science cases (< 1 second).

astro-ph.IM↗

arXiv2018

Automated data processing architecture for the Gemini Planet Imager Exoplanet Survey

The Gemini Planet Imager Exoplanet Survey (GPIES) is a multi-year direct imaging survey of 600 stars to discover and characterize young Jovian exoplanets and their environments. We have developed an automated data architecture to process and index all data related to the survey uniformly. An automated and flexible data processing framework, which we term the Data Cruncher, combines multiple data reduction pipelines together to process all spectroscopic, polarimetric, and calibration data taken with GPIES. With no human intervention, fully reduced and calibrated data products are available less than an hour after the data are taken to expedite follow-up on potential objects of interest. The Data Cruncher can run on a supercomputer to reprocess all GPIES data in a single day as improvements are made to our data reduction pipelines. A backend MySQL database indexes all files, which are synced to the cloud, and a front-end web server allows for easy browsing of all files associated with GPIES. To help observers, quicklook displays show reduced data as they are processed in real-time, and chatbots on Slack post observing information as well as reduced data products. Together, the GPIES automated data processing architecture reduces our workload, provides real-time data reduction, optimizes our observing strategy, and maintains a homogeneously reduced dataset to study planet occurrence and instrument performance.

astro-ph.IM↗

arXiv2016

The Infrared Imaging Spectrograph (IRIS) for TMT: optical design of IRIS imager with "Co-axis double TMA"

IRIS (InfraRed Imaging Spectrograph) is one of the first-generation instruments for the Thirty Meter Telescope (TMT). IRIS is composed of a combination of near-infrared (0.84--2.4 $\mu$m) diffraction limited imager and integral field spectrograph. To achieve near-diffraction limited resolutions in the near-infrared wavelength region, IRIS uses the advanced adaptive optics system NFIRAOS (Narrow Field Infrared Adaptive Optics System) and integrated on-instrument wavefront sensors (OIWFS). However, IRIS itself has challenging specifications. First, the overall system wavefront error should be less than 40 nm in Y, z, J, and H-band and 42 nm in K-band over a 34.0 $\times$ 34.0 arcsecond field of view. Second, the throughput of the imager components should be more than 42 percent. To achieve the extremely low wavefront error and high throughput, all reflective design has been newly proposed. We have adopted a new design policy called "Co-Axis double-TMA", which cancels the asymmetric aberrations generated by "collimator/TMA" and "camera/TMA" efficiently. The latest imager design meets all specifications, and, in particular, the wavefront error is less than 17.3 nm and throughput is more than 50.8 percent. However, to meet the specification of wavefront error and throughput as built performance, the IRIS imager requires both mirrors with low surface irregularity after high-reflection coating in cryogenic and high-level Assembly Integration and Verification (AIV). To deal with these technical challenges, we have done the tolerance analysis and found that total pass rate is almost 99 percent in the case of gauss distribution and more than 90 percent in the case of parabolic distribution using four compensators. We also have made an AIV plan and feasibility check of the optical elements. In this paper, we will present the details of this optical system.

astro-ph.IM↗

arXiv2016

Flowdown of the TMT astrometry error budget(s) to the IRIS design

TMT has defined the accuracy to be achieved for both absolute and differential astrometry in its top-level requirements documents. Because of the complexities of different types of astrometric observations, these requirements cannot be used to specify system design parameters directly. The TMT astrometry working group therefore developed detailed astrometry error budgets for a variety of science cases. These error budgets detail how astrometric errors propagate through the calibration, observing and data reduction processes. The budgets need to be condensed into sets of specific requirements that can be used by each subsystem team for design purposes. We show how this flowdown from error budgets to design requirements is achieved for the case of TMT's first-light Infrared Imaging Spectrometer (IRIS) instrument.

astro-ph.IM↗

arXiv2016

The Infrared Imaging Spectrograph (IRIS) for TMT: motion planning with collision avoidance for the on-instrument wavefront sensors

The InfraRed Imaging Spectrograph (IRIS) will be a first-light client instrument for the Narrow Field Infrared Adaptive Optics System (NFIRAOS) on the Thirty Meter Telescope. IRIS includes three configurable tip/tilt (TT) or tip/tilt/focus (TTF) On-Instrument Wavefront Sensors (OIWFS). These sensors are positioned over natural guide star (NGS) asterisms using movable polar-coordinate pick-off arms (POA) that patrol an approximately 2-arcminute circular field-of-view (FOV). The POAs are capable of colliding with one another, so an algorithm for coordinated motion that avoids contact is required. We have adopted an approach in which arm motion is evaluated using the gradient descent of a scalar potential field that includes an attractive component towards the goal configuration (locations of target stars), and repulsive components to avoid obstacles (proximity to adjacent arms). The resulting vector field is further modified by adding a component transverse to the repulsive gradient to avoid problematic local minima in the potential. We present path planning simulations using this computationally inexpensive technique, which exhibit smooth and efficient trajectories.

astro-ph.IM↗

arXiv2014

On-sky vibration environment for the Gemini Planet Imager and mitigation effort

The Gemini Planet Imager (GPI) entered on-sky commissioning and had its first-light at the Gemini South (GS) telescope in November 2013. GPI is an extreme adaptive optics (XAO), high-contrast imager and integral-field spectrograph dedicated to the direct detection of hot exo-planets down to a Jupiter mass. The performance of the apodized pupil Lyot coronagraph depends critically upon the residual wavefront error (design goal of 60 nm RMS with 5 mas RMS tip/tilt), and therefore is most sensitive to vibration (internal or external) of Gemini's instrument suite. Excess vibration can be mitigated by a variety of methods such as passive or active dampening at the instrument or telescope structure or Kalman filtering of specific frequencies with the AO control loop. Understanding the sources, magnitudes and impact of vibration is key to mitigation. This paper gives an overview of related investigations based on instrument data (GPI AO module) as well as external data from accelerometer sensors placed at different locations on the GS telescope structure. We report the status of related mitigation efforts, and present corresponding results.

astro-ph.IM↗

arXiv2014

Gemini Planet Imager Observational Calibrations II: Detector Performance and Calibration

The Gemini Planet Imager is a newly commissioned facility instrument designed to measure the near-infrared spectra of young extrasolar planets in the solar neighborhood and obtain imaging polarimetry of circumstellar disks. GPI's science instrument is an integral field spectrograph that utilizes a HAWAII-2RG detector with a SIDECAR ASIC readout system. This paper describes the detector characterization and calibrations performed by the GPI Data Reduction Pipeline to compensate for effects including bad/hot/cold pixels, persistence, non-linearity, vibration induced microphonics and correlated read noise.

astro-ph.IM↗

arXiv2014

The Gemini Planet Imager: First Light

The Gemini Planet Imager (GPI) is a dedicated facility for directly imaging and spectroscopically characterizing extrasolar planets. It combines a very high-order adaptive optics system, a diffraction-suppressing coronagraph, and an integral field spectrograph with low spectral resolution but high spatial resolution. Every aspect of GPI has been tuned for maximum sensitivity to faint planets near bright stars. During first light observations, we achieved an estimated H band Strehl ratio of 0.89 and a 5-sigma contrast of $10^6$ at 0.75 arcseconds and $10^5$ at 0.35 arcseconds. Observations of Beta Pictoris clearly detect the planet, Beta Pictoris b, in a single 60-second exposure with minimal post-processing. Beta Pictoris b is observed at a separation of $434 \pm 6$ milli-arcseconds and position angle $211.8 \pm 0.5$ deg. Fitting the Keplerian orbit of Beta Pic b using the new position together with previous astrometry gives a factor of three improvement in most parameters over previous solutions. The planet orbits at a semi-major axis of $9.0^{+0.8}_{-0.4}$ AU near the 3:2 resonance with the previously-known 6 AU asteroidal belt and is aligned with the inner warped disk. The observations give a 4% posterior probability of a transit of the planet in late 2017.

astro-ph.EP↗

arXiv2012

Detection and Characterization of Exoplanets and Disks using Projections on Karhunen-Loeve Eigenimages

We describe a new method to achieve point spread function (PSF) subtractions for high- contrast imaging using Principal Component Analysis (PCA) that is applicable to both point sources or extended objects (disks). Assuming a library of reference PSFs, a Karhunen-Lo`eve transform of theses references is used to create an orthogonal basis of eigenimages, on which the science target is projected. For detection this approach provides comparable suppression to the Locally Optimized Combination of Images (LOCI) algorithm, albeit with increased robustness to the algorithm parameters and speed enhancement. For characterization of detected sources the method enables forward modeling of astrophysical sources. This alleviates the biases in the astrometry and photometry of discovered faint sources, which are usually associated with LOCI- based PSF subtractions schemes. We illustrate the algorithm performance using archival Hubble Space Telescope (HST) images, but the approach may also be considered for ground-based data acquired with Angular Differential Imaging (ADI) or integral-field spectrographs (IFS).

astro-ph.IM↗

arXiv2010

Testing stellar cusp formation theories with observations of the Milky Way nuclear star cluster

(Abridged) We report on the structure of the nuclear star cluster in the innermost 0.16 pc of the Galaxy as measured by the number density profile of late-type giants. Using laser guide star adaptive optics in conjunction with the integral field spectrograph, OSIRIS, at the Keck II telescope, we are able to differentiate between the older, late-type (~ 1 Gyr) stars, which are presumed to be dynamically relaxed, and the unrelaxed young (~ 6 Myr) population. This distinction is crucial for testing models of stellar cusp formation in the vicinity of a black hole, as the models assume that the cusp stars are in dynamical equilibrium in the black hole potential. We find that contamination from young stars is significant, with more than twice as many young stars as old stars in our sensitivity range (K < 15.5) within the central arcsecond. Based on the late-type stars alone, the surface stellar number density profile, is flat, with a projected power law slope of -0.26+-0.24. These results are consistent with the nuclear star cluster having no cusp, with a core profile that is significantly flatter than predicted by most cusp formation theories. Here, we also review the methods for further constraining the true three-dimensional radial profile using kinematic measurements. Precise acceleration measurements in the plane of the sky as well as along the line of sight has the potential to directly measure the density profile to establish whether there is a "hole" in the distribution of late-type stars in the inner 0.1 pc.

astro-ph.GA↗

arXiv2009

High angular resolution integral-field spectroscopy of the Galaxy's nuclear cluster: a missing stellar cusp?

We report on the structure of the nuclear star cluster in the innermost 0.16 pc of the Galaxy as measured by the number density profile of late-type giants. Using laser guide star adaptive optics in conjunction with the integral field spectrograph, OSIRIS, at the Keck II telescope, we are able to differentiate between the older, late-type ($\sim$ 1 Gyr) stars, which are presumed to be dynamically relaxed, and the unrelaxed young ($\sim$ 6 Myr) population. This distinction is crucial for testing models of stellar cusp formation in the vicinity of a black hole, as the models assume that the cusp stars are in dynamical equilibrium in the black hole potential. Based on the late-type stars alone, the surface stellar number density profile, $\Sigma(R) \propto R^{-\Gamma}$, is flat, with $\Gamma = -0.27\pm0.19$. Monte Carlo simulations of the possible de-projected volume density profile, n(r) $\propto r^{-\gamma}$, show that $\gamma$ is less than 1.0 at the 99.73 % confidence level. These results are consistent with the nuclear star cluster having no cusp, with a core profile that is significantly flatter than predicted by most cusp formation theories, and even allows for the presence of a central hole in the stellar distribution. Of the possible dynamical interactions that can lead to the depletion of the red giants observable in this survey -- stellar collisions, mass segregation from stellar remnants, or a recent merger event -- mass segregation is the only one that can be ruled out as the dominant depletion mechanism. The lack of a stellar cusp around a supermassive black hole would have important implications for black hole growth models and inferences on the presence of a black hole based upon stellar distributions.

astro-ph.GA↗

arXiv2009

Understanding the Astrophysics of Galaxy Evolution: the role of spectroscopic surveys in the next decade

Over the last decade optical spectroscopic surveys have characterized the low redshift galaxy population and uncovered populations of star-forming galaxies back to z ~ 7. This work has shown that the primary epoch of galaxy building and black hole growth occurs at redshifts of 2 to 3. The establishment of the concordance LCDM cosmology shifted the focus of galaxy population studies from constraining cosmological parameters to characterizing the processes which regulate the formation and evolution of galaxies.In the next decade, high redshift observers will attempt to formulate a coherent evolutionary picture connecting galaxies in the high redshift Universe to galaxies today. In order to link galaxy populations at different redshifts, we must not only characterize their evolution in a systematic way, we must establish which physical processes are responsible for it. Considerable progress has already been made in understanding how galaxies evolved from z ~ 1 to the present day. Large spectroscopic surveys in the near infrared are required to push these studies back towards the main epoch of galaxy building. Only then will we understand the full story of the formation of L* galaxies like our own Milky Way. A large near-IR spectroscopic survey will also provide the calibration needed to avoid systematics in the large photometric programs proposed to study the nature of dark matter and dark energy. We provide an outline design for a multi-object 0.4 to 1.8 micron spectrograph, which could be placed on an existing telescope, and which would allow a full characterization of the galaxy population out to z ~ 2. We strongly recommend a serious further study to design a real instrument, which will be required for galaxy formation studies to advance to the next frontier.

astro-ph.CO↗

arXiv2007

Ground-Based Direct Detection of Exoplanets with the Gemini Planet Imager (GPI)

The Gemini Planet (GPI) imager is an "extreme" adaptive optics system being designed and built for the Gemini Observatory. GPI combines precise and accurate wavefront control, diffraction suppression, and a speckle-suppressing science camera with integral field and polarimetry capabilities. GPI's primary science goal is the direct detection and characterization of young, Jovian-mass exoplanets. For systems younger than 2 Gyr exoplanets more massive than 6 MJ and semimajor axes beyond 10 AU are detected with completeness greater than 50%. GPI will also discover faint debris disks, explore icy moons and minor planets in the solar system, reveal high dynamic range main-sequence binaries, and study mass loss from evolved stars. This white paper explains the role of GPI in exoplanet discovery and characterization and summarizes our recommendations to the NSF-NASA-DOE Astronomy and Astrophysics Advisory Committee ExoPlanet Task Force.

astro-ph↗

arXiv2000

Tests of the Accelerating Universe with Near-Infrared Observations of a High-Redshift Type Ia Supernova

We have measured the rest-frame B,V, and I-band light curves of a high-redshift type Ia supernova (SN Ia), SN 1999Q (z=0.46), using HST and ground-based near-infrared detectors. A goal of this study is the measurement of the color excess, E_{B-I}, which is a sensitive indicator of interstellar or intergalactic dust which could affect recent cosmological measurements from high-redshift SNe Ia. Our observations disfavor a 30% opacity of SN Ia visual light by dust as an alternative to an accelerating Universe. This statement applies to both Galactic-type dust (rejected at the 3.4 sigma confidence level) and greyer dust (grain size > 0.1 microns; rejected at the 2.3 to 2.6 sigma confidence level) as proposed by Aguirre (1999). The rest-frame $I$-band light cur ve shows the secondary maximum a month after B maximum typical of nearby SNe Ia of normal luminosi ty, providing no indication of evolution as a function of redshift out to z~0.5. A n expanded set of similar observations could improve the constraints on any contribution of extragalactic dust to the dimming of high-redshift SNe Ia.

astro-ph↗