arXiv subjects

Jacob Taylor

Publications and source records attributed to Jacob Taylor.

At least 19 recordsLinked to original sources

arXiv2026

NIRC2-Pol: First Light of Near-Infrared Polarimetry on Keck II

NIRC2, the Near Infrared Camera 2 on the Keck II telescope, was recently upgraded with a new suite of polarimetric observing modes. The new polarimetry modes (referred to as NIRC2-Pol) open up a wide range of new studies, including investigations of exoplanets, the Galactic center, active galactic nuclei, and solar system objects. The new modes enabled by the upgrade span the 1.1 to 4.1 micron range (i.e. J through L' bands) and include imaging polarimetry, coronagraphic imaging polarimetry, and spectropolarimetry. NIRC2-Pol is unique, as Keck II is the largest telescope (10 m) on which AO-fed infrared polarimetry capabilities are available, one of few with L' polarimetric imaging, and the only one where there is both a polarimetric mode and a vortex coronagraph. Here, we introduce the design of NIRC2-Pol, its capabilities, and its current operational status. We also present its first on-sky results: the first L' polarimetric images of the AB Aurigae circumstellar disk. These images more clearly reveal the disk's iconic spiral arms than previous L' total intensity imaging.

astro-ph.IM↗

arXiv2026

Enabling Quantitative Polarimetry for Keck/NIRC2: Preliminary Mueller Matrix Model Calibration

The Keck/NIRC2 infrared imager was upgraded in 2025 with dual-beam polarimetric observing modes spanning approximately 1.1--4.1 microns (JHKL' bands). We present a preliminary JHK calibration of NIRC2 Polarimetry using a wavelength-dependent Mueller matrix model of the Keck tertiary mirror (M3), half-wave plate (HWP), image rotator (IMR), downstream optics, and Wollaston prism. We constrain the model downstream of M3 using dome flat sequences spanning ten HWP and nine IMR angles in each band. Although the model reproduces the dominant modulation, the residuals show structure dependent on HWP and IMR angle. Measurement matrix inversion of unpolarized standard star observations gives M3 diattenuations of 0.0119+/-0.0009, 0.0098+/-0.0004, and 0.0068+/-0.0005 in J, H, and Kp, substantially closer to Fresnel predictions for aluminum than the values derived from dome flats. The larger dome flat modulation may indicate polarization in the incident dome illumination or Mueller matrix model inaccuracies. These results establish an initial calibration framework while motivating improved input polarization constraints, fixed HWP parameters from previous laboratory measurements, model validation with polarized standard stars, and extension to L'.

astro-ph.IM↗

arXiv2026

On-sky capabilities and performance of the Keck All Sky Precision Adaptive Optics system

The Keck All Sky Precision Adaptive optics (KAPA) project upgrades the Keck I adaptive optics system to enable laser tomography using a four laser guide star (LGS) asterism. KAPA is now in operation in both narrow field and wide field modes to optimize correction on-axis or over the science field of view of the camera. The use of four LGSs, in conjunction with a tomographic reconstructor and pseudo open-loop control, leads to a significant reduction in wavefront error. We describe the overall architecture, development of the tomographic algorithm, real-time implementation and preliminary on-sky results here. By comparing the on-sky image quality with that obtained using a single LGS (sLGS) we clearly demonstrate the benefits of laser tomography, a technology which is crucial to the success of the next generation of extremely large telescopes.

astro-ph.IM↗

arXiv2026

LUVCam: A high-performance, low-cost, UV/optical camera for the future of astronomy in space

Astronomy-grade cameras with robust performance and heritage in the space environment have long been costly, substantially limiting capacity for space-based astronomy and creating a resource barrier to access. Additionally, ultraviolet observations have historically been limited by the low quantum efficiency of most sensors in this wavelength range. The LUVCam program is designed to address both issues by providing a high-performance, low-cost, UV/optical camera system sufficiently capable to support a wide-array of space-based astronomy missions. LUVCam features a large format, low-noise, large pixel, and high quantum efficiency, commercial-off-the-shelf back(front)-side illuminated CMOS sensor, packaged with custom built readout electronics, firmware, and thermomechanical structure to provide both superlative science capability and precision on-sensor guidance at fast cadence to allow for stable high-resolution imaging. LUVCam is ITAR-free and cheap to fabricate, opening up new opportunities for access to space telescopes. Here we introduce LUVCam, describe its performance characteristics, and the rapid implementation of a technology demonstration for flight. LUVCam, coupled with a small aperture custom-built UV telescope, has been on orbit since July 2024 and has achieved Technology Readiness Level (TRL) 7. LUVCam is manifested for several more near-term orbital missions, including a second technology demonstration CubeSat for launch in 2026, and will provide both focal plane cameras for QUVIK, a two-channel UV transient astronomy mission.

astro-ph.IM↗

arXiv2026

Progress report on the integration of the IRTF adaptive secondary mirror

IRTF-ASM-1 is the first on-sky adaptive secondary mirror using the hybrid variable reluctance (HVR) actuators developed by the Netherlands Organization for Applied Scientific Research (TNO). Since its first light in April 2024, the ASM has continued to work consistently well with no hardware issues. The primary purpose of IRTF-ASM-1 is to serve as a demonstration of the HVR actuator technology, both in terms of verifying its robustness and testing calibration methods that are relevant to larger ASMs. However, as the ASM has proven to be easy to handle and reliable in its performance, we are moving toward integrating the ASM for long-term use at IRTF. We present closed loop results with the ASM and IRTF's off-axis facility wavefront sensor FELIX. Correcting the first seven Zernike modes through coma at 90-180 Hz, we are able to enhance the seeing by a factor of 1.8 in FWHM under 0."5 seeing conditions. We also performed the first science observations with the ASM in "static" mode and demonstrated that we can improve the throughput of IRTF's slit spectrograph by approximately a factor of 2, although this requires good reference slopes in FELIX. In the near future, we plan to optimize the calibration of reference slopes in FELIX and streamline the software so that the system can be operated by a non-AO expert.

astro-ph.IM↗

arXiv2026

Optimal Question Selection from a Large Question Bank for Clinical Field Recovery in Conversational Psychiatric Intake

Psychiatric intake is a sequential, high-stakes information-gathering process in which clinicians must decide what to ask, in what order, and how to interpret incomplete or ambiguous responses under limited time. Despite growing interest in conversational AI for healthcare, there is still limited infrastructure for conversational AI in this application. Accordingly, we formulate this task as a question-selection problem with clinically grounded questions, known target information, and controllable patient difficulty. We also introduce a task-specific question-selection benchmark based on a bank of 655 clinician-authored intake questions and corresponding synthetic patient vignettes with 5 different behavioral conditions. In our evaluation, we compare random questioning, a clinical psychiatric intake form baseline, and an LLM-guided adaptive policy across 300 interview sessions spanning four patients and five behavioral conditions. Across the benchmark, the clinically ordered fixed form substantially outperforms random questioning, and the LLM-guided policy achieves the strongest overall recovery. The advantage of adaptation grows sharply under patient behavior that is less amenable to field recovery, especially under guarded-concise conditions. These findings suggest that performance in conversational clinical systems depends not only on language understanding after information is disclosed, but also on whether the system reaches the right topics within a limited interaction budget. More broadly, the benchmark provides a controlled framework for studying how clinical structure and adaptive follow-up contribute to information recovery in interactive clinical machine learning.

cs.CL↗

arXiv2026

The NANOGrav 15 yr Data Set: Piecewise Power-Law Reconstruction of the Gravitational-Wave Background

The NANOGrav 15-year (NG15) data set provides evidence for a gravitational-wave background (GWB) signal at nanohertz frequencies, which is expected to originate either from a cosmic population of inspiraling supermassive black-hole binaries or new particle physics in the early Universe. A firm identification of the source of the NG15 signal requires an accurate reconstruction of its frequency spectrum. In this paper, we provide such a spectral characterization of the NG15 signal based on a piecewise power-law (PPL) ansatz that strikes a balance between existing alternatives in the literature. Our PPL reconstruction is more flexible than the standard constant-power-law model, which describes the GWB spectrum in terms of only two parameters: an amplitude A and a spectral index gamma. Concurrently, it better approximates physically realistic GWB spectra -- especially those of cosmological origin -- than the free spectral model, since the latter allows for arbitrary variations in the GWB amplitude from one frequency bin to the next. Our PPL reconstruction of the NG15 signal relies on individual PPL models with a fixed number of internal nodes (i.e., constant power law, broken power law, doubly broken power law, etc.) that are ultimately combined in a Bayesian model average. The data products resulting from our analysis provide the basis for fast refits of spectral GWB models.

astro-ph.HE↗

arXiv2025

Lithographically Defined Si$_3$N$_4$ Torsional Pendulum

Torsion pendulums provide an opportunity to trap large masses in a potential weak enough to explore two-body gravitation. Cooled to, and then released from a ground state, weak quantum effects, including those from gravity, might reveal themselves in the evolving decoherence of a torsion pendulum, if its baseline dissipation were sufficiently dilute for quantum coherent oscillation. Monolithic ribbon-like, or multi-filar suspension geometries provide a key to such dilution in torsion, but are challenging to make. As a solution, we introduce a lithographically defined silicon nitride (Si$_3$N$_4$) ribbon suspension in a wafer-scale approach to pendulum fabrication that is conducive to such 2-D geometries, making extreme aspect ratios, and even multi-filar designs, a possibility. A monofilar, monolithic, centimeter scale torsion pendulum is fabricated and released in a first proof of concept. Mounted in vacuum, it is optically excited and cooled using measurement based feedback. Though only 37 mg, the device displays a fundamental frequency of 162 mHz and an undiluted Q of 12000, demonstrating a foundational step towards ultra-coherent, ultra-low frequency torsion pendulums.

physics.app-ph↗

arXiv2025

Unreasonable effectiveness of unsupervised learning in identifying Majorana topology

In unsupervised learning, the training data for deep learning does not come with any labels, thus forcing the algorithm to discover hidden patterns in the data for discerning useful information. This, in principle, could be a powerful tool in identifying topological order since topology does not always manifest in obvious physical ways (e.g., topological superconductivity) for its decisive confirmation. The problem, however, is that unsupervised learning is a difficult challenge, necessitating huge computing resources, which may not always work. In the current work, we combine unsupervised and supervised learning using an autoencoder to establish that unlabeled data in the Majorana splitting in realistic short disordered nanowires may enable not only a distinction between `topological' and `trivial', but also where their crossover happens in the relevant parameter space. This may be a useful tool in identifying topology in Majorana nanowires.

cond-mat.dis-nn↗

arXiv2025

Inferring Mbh-Mbulge Evolution from the Gravitational Wave Background

We test the impact of an evolving supermassive black hole (SMBH) mass scaling relation (Mbh-Mbulge) on the predictions for the gravitational wave background (GWB). The observed GWB amplitude is 2-3 times higher than predicted by astrophysically informed models which suggests the need to revise the assumptions in those models. We compare a semi-analytic model's ability to reproduce the observed GWB spectrum with a static versus evolving-amplitude Mbh-Mbulge relation. We additionally consider the influence of the choice of galaxy stellar mass function on the modeled GWB spectra. Our models are able to reproduce the GWB amplitude with either a large number density of massive galaxies or a positively evolving Mbh-Mbulge amplitude (i.e., the Mbh / Mbulge ratio was higher in the past). If we assume that the Mbh-Mbulge amplitude does not evolve, our models require a galaxy stellar mass function that implies an undetected population of massive galaxies (Mstellar > 10^11 Msun at z > 1). When the Mbh-Mbulge amplitude is allowed to evolve, we can model the GWB spectrum with all fiducial values and an Mbh-Mbulge amplitude that evolves as alpha(z) = alpha_0 (1 + z)^(1.04 +/- 0.5).

astro-ph.HE↗

arXiv2025

The NANOGrav 15-year Data Set: Search for Gravitational Wave Memory

We present the results of a search for nonlinear gravitational wave memory in the NANOGrav 15-year data set. We find no significant evidence for memory signals in the dataset, with a maximum Bayes factor of 3.1 in favor of a model including memory. We therefore place upper limits on the strain of potential gravitational wave memory events as a function of sky location and observing epoch. We find upper limits that are not always more constraining than previous NANOGrav results. We show that it is likely due to the increase in common red noise between the 12.5-year and 15-year NANOGrav datasets.

gr-qc↗

arXiv2024

Derandomized shallow shadows: Efficient Pauli learning with bounded-depth circuits

Efficiently estimating large numbers of non-commuting observables is an important subroutine of many quantum science tasks. We present the derandomized shallow shadows (DSS) algorithm for efficiently learning a large set of non-commuting observables, using shallow circuits to rotate into measurement bases. Exploiting tensor network techniques to ensure polynomial scaling of classical resources, our algorithm outputs a set of shallow measurement circuits that approximately minimizes the sample complexity of estimating a given set of Pauli strings. We numerically demonstrate systematic improvement, in comparison with state-of-the-art techniques, for energy estimation of quantum chemistry benchmarks and verification of quantum many-body systems, and we observe DSS's performance consistently improves as one allows deeper measurement circuits. These results indicate that in addition to being an efficient, low-depth, stand-alone algorithm, DSS can also benefit many larger quantum algorithms requiring estimation of multiple non-commuting observables.

quant-ph↗

arXiv2024

The NANOGrav 15 yr Data Set: Harmonic Analysis of the Pulsar Angular Correlations

Pulsar timing array observations have found evidence for an isotropic gravitational wave background with the Hellings-Downs angular correlations, expected from general relativity. This interpretation hinges on the measured shape of the angular correlations, which is predominately quadrupolar under general relativity. Here we explore a more flexible parameterization: we expand the angular correlations into a sum of Legendre polynomials and use a Bayesian analysis to constrain their coefficients with the 15-year pulsar timing data set collected by the North American Nanohertz Observatory for Gravitational Waves (NANOGrav). When including Legendre polynomials with multipoles $\ell \geq 2$, we only find a significant signal in the quadrupole with an amplitude consistent with general relativity and non-zero at the $\sim 95\%$ confidence level and a Bayes factor of 200. When we include multipoles $\ell \leq 1$, the Bayes factor evidence for quadrupole correlations decreases by more than an order of magnitude due to evidence for a monopolar signal at approximately 4 nHz which has also been noted in previous analyses of the NANOGrav 15-year data. Further work needs to be done in order to better characterize the properties of this monopolar signal and its effect on the evidence for quadrupolar angular correlations.

astro-ph.HE↗

arXiv2024

Inference on inner galaxy structure via gravitational waves from supermassive binaries

The detection of a stochastic gravitational wave background by pulsar-timing arrays indicates the presence of a population of supermassive black hole binaries. Although the observed spectrum generally matches predictions for orbital evolution driven by gravitational-wave emission in circular orbits, there is a preference for a spectral turnover at the lowest observed frequencies, which may point to substantial hardening during a transition from early environmental influences to later stages dominated by emission. In the vicinity of these binaries, the ejection of stars or dark matter particles through gravitational three-body slingshots efficiently extracts orbital energy, leading to a low-frequency turnover in the spectrum. Here we model how the gravitational-wave spectrum depends on the initial inner galactic profile before scouring by binary ejections while accounting for a range of initial binary eccentricities. By analysing the NANOGrav 15-year data, we find that a parsec-scale galactic-centre density of around $10^6 M_{\odot} \mathrm{pc}^{-3}$ is favoured across most of the parameter space, thus shedding light on the environmental effects that shape black hole evolution and the combined matter density near galaxy centres.

astro-ph.HE↗

arXiv2024

Tuning the MAPS Adaptive Secondary Mirror: Actuator Control, PID Tuning, Power Spectra and Failure Diagnosis

The MMT Adaptive optics exoPlanet characterization System (MAPS) is currently in its engineering phase, operating on-sky at the MMT Telescope on Mt. Hopkins in southern Arizona. The MAPS Adaptive Secondary Mirror's actuators are controlled by a closed loop modified PID control law and an open loop feed-forward law, which in combination allows for faster actuator response time. An essential element of achieving the secondary's performance goals involves the process of PID gain tuning. To start, we briefly discuss the design of the MAPS ASM and its actuators. We then describe the actuator positional control system and control law. Next, we discuss a few of the issues that make ASM tuning difficult. We then outline our initial attempts at tuning the actuator controllers and discuss the use of actuator positional power spectra for both tuning and determining the health and failure states of individual actuators. We conclude by presenting the results of our latest round of tuning configuration trials, which have been successful at decreasing mirror latency, increasing operational mirror modes and improving image PSF.

astro-ph.IM↗

arXiv2024

Performance estimation of photonic integrated wavefront corrector for single-mode fiber coupling

Many modern astronomical instruments rely on the optimal coupling of starlight into single-mode fibers (SMFs). For ground-based telescopes, this coupling is limited by atmospheric turbulence. We propose an integrated wavefront corrector based on silicon-on-insulator (SOI) photonics, which samples the aberrated wavefront via a microlens array (MLA). The MLA focuses the sampled wavefront onto an array of grating couplers that inject the beamlets into the single-mode waveguides of the corrector. The beams in each waveguide are then shifted in phase using thermo-optic phase shifters before combining the co-phased beams into one single-mode waveguide. In this work, we analyze the external factors that we anticipate will impact the performance of the corrector. Specifically, we study the effects of the telescope pupil function with obscuration, determine whether the corrector requires tip/tilt pre-correction, and analyze the impact of scintillation on the correction quality.

astro-ph.IM↗

arXiv2024

Experimental demonstration of photonic phase correctors based on grating coupler arrays and thermo-optic shifters

In ground-based astronomy, the ability to couple light into single-mode fibers (SMFs) is limited by atmospheric turbulence, which prohibits the use of many astrophotonic instruments. We propose a silicon-on-insulator photonic chip capable of coherently coupling the out-of-phase beamlets from the subapertures of a telescope pupil into an SMF. The photonic integrated circuit (PIC) consists of an array of grating couplers that are used to inject light from free space into single-mode waveguides on the chip. Metallic heaters modulate the refractive index of a coiled section of the waveguides, facilitating the co-phasing of the propagating modes. The phased beamlets can then be coherently combined to efficiently deliver the light to an output SMF. In an adaptive optics (AO) system, the phase corrector acts as a deformable mirror (DM) commanded by a controller that takes phase measurements from a wavefront sensor (WFS). We present experimental results for the PIC tested on an AO testbed and compare the performance to simulations.

astro-ph.IM↗

arXiv2024

ESCAPE: Efficient Synthesis of Calibrations for Adaptive optics through Pseudo-synthetic and Empirical methods

With the commissioning of the refurbished adaptive secondary mirror (ASM) for the 6.5-meter MMT Observatory under way, special consideration had to be made to properly calibrate the mirror response functions to generate an interaction matrix (IM). The commissioning of the ASM is part of the MMT Adaptive optics exoPlanet characterization System (MAPS) upgrade the observatory's legacy adaptive optics (AO) system. Unlike most AO systems, MAPS employs a convex ASM which prevents the introduction of a calibration source capable of simultaneously illuminating its ASM and wavefront sensor (WFS). This makes calibration of the AO system a significant hurdle in commissioning. To address this, we have employed a hybrid calibration strategy we call the Efficient Synthesis of Calibrations for Adaptive Optics through Pseudo-synthetic and Empirical methods (ESCAPE). ESCAPE combines the DO-CRIME on-sky calibration method with the SPRINT method for computing pseudo-synthetic calibration matrices. To monitor quasi-static system change, the ESCAPE methodology rapidly and continuously generates pseudo-synthetic calibration matrices using continual empirical feedback in either open or closed-loop. In addition, by measuring the current IM in the background while in close-loop, we are also able to measure the optical gains for pyramid wavefront sensor (PyWFS) systems. In this paper, we will provide the mathematical foundation of the ESCAPE calibration strategy and on-sky results from its application in calibrating the MMT Observatory's ASM. Additionally, we will showcase the validation of our approach from our AO testbed and share preliminary on-sky results from MMT.

astro-ph.IM↗