arXiv subjects

Jacob Seifert

Publications and source records attributed to Jacob Seifert.

8 recordsLinked to original sources

arXiv2026

Multiparameter Maximum Information States for Coherent Diffraction Measurements

In metrology, Fisher information is an important metric that quantifies the precision that can be achieved in a measurement. For optical measurements using coherent light it has been shown that Fisher information can be expressed simply using the scattering matrix of the system. Fisher information can be maximized over the input modes to achieve maximum information states, which produce optimally precise estimates for a parameter when the system is limited by photon noise. Here, we extend this approach to multiparameter estimation, in which case Fisher information takes the form of a matrix. We consider several scalar functions of the Fisher matrix to optimize the precision in multiple parameters at the same time. We also consider strategies for dealing with nuisance parameters, which can degrade the achievable precision of other parameters but are not of interest to measure. We corroborate our findings numerically using a scattering system of 2D coupled dipoles.

physics.optics↗

arXiv2023

Wavelength-multiplexed Multi-mode EUV Reflection Ptychography based on Automatic-Differentiation

Ptychographic extreme ultraviolet (EUV) diffractive imaging has emerged as a promising candidate for the next-generation metrology solutions in the semiconductor industry, as it can image wafer samples in reflection geometry at the nanoscale. This technique has surged attention recently, owing to the significant progress in high-harmonic generation (HHG) EUV sources and advancements in both hardware and software for computation. In this study, a novel algorithm is introduced and tested, which enables wavelength-multiplexed reconstruction that enhances the measurement throughput and introduces data diversity, allowing the accurate characterisation of sample structures. To tackle the inherent instabilities of the HHG source, a modal approach was adopted, which represents the cross-density function of the illumination by a series of mutually incoherent and independent spatial modes. The proposed algorithm was implemented on a mainstream machine learning platform, which leverages automatic differentiation to manage the drastic growth in model complexity and expedites the computation using GPU acceleration. By optimising over 200 million parameters, we demonstrate the algorithm's capacity to accommodate experimental uncertainties and achieve a resolution approaching the diffraction limit in reflection geometry. The reconstruction of wafer samples with 20-nm heigh patterned gold structures on a silicon substrate highlights our ability to handle complex physical interrelations involving a multitude of parameters. These results establish ptychography as an efficient and accurate metrology tool.

eess.IV↗

arXiv2023

Noise-robust latent vector reconstruction in ptychography using deep generative models

Computational imaging is increasingly vital for a broad spectrum of applications, ranging from biological to material sciences. This includes applications where the object is known and sufficiently sparse, allowing it to be described with a reduced number of parameters. When no explicit parameterization is available, a deep generative model can be trained to represent an object in a low-dimensional latent space. In this paper, we harness this dimensionality reduction capability of autoencoders to search for the object solution within the latent space rather than the object space. We demonstrate a novel approach to ptychographic image reconstruction by integrating a deep generative model obtained from a pre-trained autoencoder within an Automatic Differentiation Ptychography (ADP) framework. This approach enables the retrieval of objects from highly ill-posed diffraction patterns, offering an effective method for noise-robust latent vector reconstruction in ptychography. Moreover, the mapping into a low-dimensional latent space allows us to visualize the optimization landscape, which provides insight into the convexity and convergence behavior of the inverse problem. With this work, we aim to facilitate new applications for sparse computational imaging such as when low radiation doses or rapid reconstructions are essential.

eess.IV↗

arXiv2023

Maximum-likelihood estimation in ptychography in the presence of Poisson-Gaussian noise statistics

Optical measurements often exhibit mixed Poisson-Gaussian noise statistics, which hampers image quality, particularly under low signal-to-noise ratio (SNR) conditions. Computational imaging falls short in such situations when solely Poissonian noise statistics are assumed. In response to this challenge, we define a loss function that explicitly incorporates this mixed noise nature. By using maximum-likelihood estimation, we devise a practical method to account for camera readout noise in gradient-based ptychography optimization. Our results, based on both experimental and numerical data, demonstrate that this approach outperforms the conventional one, enabling enhanced image reconstruction quality under challenging noise conditions through a straightforward methodological adjustment.

eess.IV↗

arXiv2023

Nanoscale rheology: Dynamic Mechanical Analysis over a broad and continuous frequency range using Photothermal Actuation Atomic Force Microscopy

Polymeric materials are widely used in industries ranging from automotive to biomedical. Their mechanical properties play a crucial role in their application and function and arise from the nanoscale structures and interactions of their constitutive polymer molecules. Polymeric materials behave viscoelastically, i.e. their mechanical responses depend on the time scale of the measurements; quantifying these time-dependent rheological properties at the nanoscale is relevant to develop, for example, accurate models and simulations of those materials, which are needed for advanced industrial applications. In this paper, an atomic force microscopy (AFM) method based on the photothermal actuation of an AFM cantilever is developed to quantify the nanoscale loss tangent, storage modulus, and loss modulus of polymeric materials. The method is then validated on a styrene-butadiene rubber (SBR), demonstrating the method's ability to quantify nanoscale viscoelasticity over a continuous frequency range up to five orders of magnitude (0.2 Hz to 20,200 Hz). Furthermore, this method is combined with AFM viscoelastic mapping obtained with amplitude-modulation frequency-modulation (AM-FM) AFM, enabling the extension of viscoelastic quantification over an even broader frequency range, and demonstrating that the novel technique synergizes with preexisting AFM techniques for quantitative measurement of viscoelastic properties. The method presented here introduces a way to characterize the viscoelasticity of polymeric materials, and soft matter in general at the nanoscale, for any application.

cond-mat.mes-hall↗

arXiv2022

Sensor fusion in ptychography

Ptychography is a lensless, computational imaging method that utilises diffraction patterns to determine the amplitude and phase of an object. In transmission ptychography, the diffraction patterns are recorded by a detector positioned along the optical axis downstream of the object. The light scattered at the highest diffraction angle carries information about the finest structures of the object. We present a setup to simultaneously capture a signal near the optical axis and a signal scattered at high diffraction angles. Moreover, we present an algorithm based on a shifted angular spectrum method and automatic differentiation that utilises this recorded signal. By jointly reconstructing the object from the resulting low and high diffraction angle images, the resolution of the reconstructed image is improved remarkably. The effective numerical aperture of the compound sensor is determined by the maximum diffraction angle captured by the off axis sensor.

eess.IV↗

arXiv2020

Optimizing illumination for precise multi-parameter estimations in coherent diffractive imaging

Coherent diffractive imaging (CDI) is widely used to characterize structured samples from measurements of diffracting intensity patterns. We introduce a numerical framework to quantify the precision that can be achieved when estimating any given set of parameters characterizing the sample from measured data. The approach, based on the calculation of the Fisher information matrix, provides a clear benchmark to assess the performance of CDI methods. Moreover, by optimizing the Fisher information metric using deep learning optimization libraries, we demonstrate how to identify the optimal illumination scheme that minimizes the estimation error under specified experimental constrains. This work paves the way for an efficient characterization of structured samples at the sub-wavelength scale.

physics.optics↗

arXiv2020

Efficient and flexible approach to ptychography using an optimization framework based on automatic differentiation

Ptychography is a lensless imaging method that allows for wavefront sensing and phase-sensitive microscopy from a set of diffraction patterns. Recently, it has been shown that the optimization task in ptychography can be achieved via automatic differentiation (AD). Here, we propose an open-access AD-based framework implemented with TensorFlow, a popular machine learning library. Using simulations, we show that our AD-based framework performs comparably to a state-of-the-art implementation of the momentum-accelerated ptychographic iterative engine (mPIE) in terms of reconstruction speed and quality. AD-based approaches provide great flexibility, as we demonstrate by setting the reconstruction distance as a trainable parameter. Lastly, we experimentally demonstrate that our framework faithfully reconstructs a biological specimen.

eess.IV↗