arXiv Science⌕ Search

arXiv subjects

Jacek Kibilda

Publications and source records attributed to Jacek Kibilda.

12 recordsLinked to original sources

Understanding Conflict and Compatibility Conditions for Agents in AI-RAN

Disaggregated mobile networks expose open interfaces for independent agents to control the Radio Access Network (RAN). The interactions between agents with contrasting objectives can result in conflicts. However, existing conflict mitigation methods treat agents that control the same parameter as being in a conflict that requires arbitration of their actions, without assessing whether their objectives can be satisfied simultaneously. In this paper, we introduce a control-theoretic approach to determine when agents can coexist and share control of the same parameters. We model threshold-based agents often encountered in the literature as sampled deadband feedback controllers and represent their objectives through Key Performance Indicator (KPI) targets and tolerances that define acceptable deadband bounds. We derive compatibility conditions from these bounds and show that compatibility for any number of agents and monitored KPIs can be established through pairwise tests. We propose a conflict mitigation policy that allows compatible agents to share control of the same network parameters while restricting arbitration to cases where their objectives cannot be satisfied simultaneously. We evaluate our policy through simulations using NIST's ns3-oran extension of ns-3, and our results show that it enables agents to share control with near-zero Service Level Agreement (SLA) drift when their objectives are compatible and the shared acceptable range is attainable, while matching Priority Mitigation when their objectives are incompatible.

cs.NI↗

Performance Analysis of ISAC Slicing with Sensing-Assisted Communication and Communication-Assisted Sensing

Integrated Sensing and Communication (ISAC) will allow 6G networks to provide both sensing and communication services through shared infrastructure and spectrum resources. However, network slicing that views these services as distinct slices with distinct objectives and performance requirements will inevitably miss the emergent value of integrating them. By considering Sensing-Assisted Communication (SAC) and Communication-Assisted Sensing (CAS), which create interdependencies between services, we can observe trade-offs in resources dimensioned to support each slice and, ultimately, the ISAC slicing performance. As such, this paper proposes a performance analysis of an ISAC slicing framework that accounts for resource allocation and sensor density, as well as SAC and CAS, dimensioned to achieve slice-specific Service-Level Agreement (SLA) satisfaction. Numerical simulations, across different bandwidth allocations, sensor deployments, and demand scenarios, show that ISAC slicing performance is fundamentally constrained by sensing resolution, shaped by demand, and scaled by sensor deployment. These findings provide insights for the design of future ISAC slicing mechanisms.

cs.NI↗

GeoRIS: Geofencing With Reconfigurable Intelligent Surfaces

Geofencing refers to controlling the availability of wireless services within a network perimeter. In this paper, we study how RIS can be used to achieve geofencing in outdoor-to-indoor network scenarios. Particularly, we propose GeoRIS, a RIS controller that achieves geofencing by exploiting beam management procedures to control beam alignment in networks with steerable directional transmission links. GeoRIS does not require control over the outdoor base station and can work with or without channel state information. Through simulations based on 3GPP network models, we validate GeoRIS and demonstrate that it can "shield" an indoor network area (for example, by weakening communication links to the point where indoor users cannot meet the minimum requirements of 5G eMBB services). We also highlight an interesting insight: the same RIS can play a dual role, extending or inhibiting outdoor-to-indoor communication. In our simulations, we show that GeoRIS can easily change an indoor space from a "strongly covered area" (e.g., supports eMBB services in approx. 90% of network area) to an "out-of-service area" (e.g., inhibits eMBB services in approx. 90% of network area), or vice-versa, an attractive characteristic in scenarios in which dynamic indoor coverage control is needed.

cs.NI↗

Adaptive RIS-aided Communications through ML-based Generation of Phase Masks

Reconfigurable Intelligent Surfaces (RISs) are an attractive technology for Millimeter Wave (mmWave) communications due to their ability to passively reflect incident signals. However, current implementations of RIS rely on performing computationally-intensive algorithms offline to generate phase masks, which are stored as a codebook on the embedded microcontroller on the RIS. The codebook size is restricted by the embedded microcontroller's storage capacity, which limits the ability of the RIS to adapt to evolving channel conditions and deployment scenarios. In this demo, we showcase an Machine Learning (ML)-based solution for dynamically generating new phase masks during runtime. Our approach leverages a ML model deployed on the microcontroller for approximating the output of a phase mask generation algorithm, responding to new inputs while remaining smaller than a codebook.

eess.SY↗

On the Robustness of RSMA to Adversarial BD-RIS-Induced Interference

This article investigates the robustness of rate-splitting multiple access (RSMA) in multi-user multiple-input single-output (MISO) systems to interference attacks against channel acquisition induced by beyond-diagonal RISs (BD-RISs). Two primary attack strategies, random and aligned interference, are proposed for fully connected and group-connected reconfigurable intelligent surface (RIS) architectures. Valid random reflection coefficients are generated exploiting the Takagi factorization, while potent aligned interference attacks are achieved through optimization strategies based on a quadratically constrained quadratic program (QCQP) reformulation followed by projections onto the unitary manifold. Our numerical findings reveal that, when perfect channel state information (CSI) is available, RSMA behaves similarly to space-division multiple access (SDMA) and thus is highly susceptible to the attack, with BD-RIS inducing severe performance loss and significantly outperforming diagonal RIS. However, under imperfect CSI, RSMA consistently demonstrates significantly greater robustness than SDMA, particularly as the system's transmit power increases.

eess.SP↗

Beam Profiling and Beamforming Modeling for mmWave NextG Networks

This paper presents an experimental study on mmWave beam profiling on a mmWave testbed, and develops a machine learning model for beamforming based on the experiment data. The datasets we have obtained from the beam profiling and the machine learning model for beamforming are valuable for a broad set of network design problems, such as network topology optimization, user equipment association, power allocation, and beam scheduling, in complex and dynamic mmWave networks. We have used two commercial-grade mmWave testbeds with operational frequencies on the 27 Ghz and 71 GHz, respectively, for beam profiling. The obtained datasets were used to train the machine learning model to estimate the received downlink signal power, and data rate at the receivers (user equipment with different geographical locations in the range of a transmitter (base station). The results have shown high prediction accuracy with low mean square error (loss), indicating the model's ability to estimate the received signal power or data rate at each individual receiver covered by a beam. The dataset and the machine learning-based beamforming model can assist researchers in optimizing various network design problems for mmWave networks.

eess.SP↗

Malicious RIS versus Massive MIMO: Securing Multiple Access against RIS-based Jamming Attacks

In this letter, we study an attack that leverages a reconfigurable intelligent surface (RIS) to induce harmful interference toward multiple users in massive multiple-input multiple-output (mMIMO) systems during the data transmission phase. We propose an efficient and flexible weighted-sum projected gradient-based algorithm for the attacker to optimize the RIS reflection coefficients without knowing legitimate user channels. To counter such a threat, we propose two reception strategies. Simulation results demonstrate that our malicious algorithm outperforms baseline strategies while offering adaptability for targeting specific users. At the same time, our results show that our mitigation strategies are effective even if only an imperfect estimate of the cascade RIS channel is available.

eess.SP↗

Dimensioning spectrum to support ultra-reliable low-latency communication

Industry-led initiatives such as the Next G Alliance (NGA) are currently considering how to dimension the spectrum required to support new classes of services envisioned beyond 5G. In particular, support for URLLC brings the challenge of how to dimension stochastic wireless networks to meet stringent reliability and latency requirements. Our analysis indicates that the bandwidth needed to meet URLLC goals can be in the order of gigahertz, beyond what is available in today's mobile networks. Network densification can ease those bandwidth needs but requires new deployment strategies involving substantially larger numbers of sites. As an alternative, we consider multi-connectivity and multi-operator network sharing as efficient ways to reduce the demand for bandwidth without outright deployment of additional base stations.

cs.NI↗

Reconfigurable Intelligent Surfaces: The New Frontier of Next G Security

RIS is one of the significant technological advancements that will mark next-generation wireless. RIS technology also opens up the possibility of new security threats, since the reflection of impinging signals can be used for malicious purposes. This article introduces the basic concept for a RIS-assisted attack that re-uses the legitimate signal towards a malicious objective. Specific attacks are identified from this base scenario, and the RIS-assisted signal cancellation attack is selected for evaluation as an attack that inherently exploits RIS capabilities. The key takeaway from the evaluation is that an effective attack requires accurate channel information, a RIS deployed in a favorable location (from the point of view of the attacker), and it disproportionately affects legitimate links that already suffer from reduced path loss. These observations motivate specific security solutions and recommendations for future work.

cs.CR↗

Performance Analysis of Indoor mmWave Networks with Ceiling-Mounted Access Points

The objective of the Enhanced Mobile Broadband use case in 5G networks is to deliver high capacity access to densely populated areas, like city centres, transportation hubs or convention centres. Millimetre-wave communications are the go-to technology to realise that objective, yet due to weak outdoor-to-indoor penetration, outdoor deployments will not suffice and dedicated indoor deployments will be necessary. In this article, we study dense deployments of millimetre-wave access points mounted on the ceiling, with directional antennas pointing downwards to illuminate selected spots on the ground. In this setup, the signal propagation is primarily limited by human body blockages. Therefore, we develop a body blockage model and derive an expression for the probability of blockage. Using the developed expressions and our simulation framework, we assess the impact of densification and body blockage on the achievable performance. We find that both coverage and area spectral efficiency curves exhibit non-trivial behaviour with respect to the access point density and that there is an optimal beamwidth-density configuration that only maximises either coverage or area spectral efficiency. Such optimal configuration changes depending on the body blockage probability, leading to a necessity for network designers to carefully consider their intended application and scenario.

cs.IT↗

Application of Flexible Numerology to Blockage Mitigation in 5G-mmWave Networks

The 5G New Radio (NR) standard for wireless communications supports the millimetre-wave (mmWave) spectrum to yield unprecedented improvement of the access network capacity. However, intermittent blockages in the mmWave signal may degrade the system performance and lead to the under-utilisation of the allocated resources. To circumvent this problem, the transmission slot-time shall be adjusted according to the blockage condition, avoiding the resource under-utilisation. In this paper, we propose that the 5G NR flexible numerology should be applied to adapt the slot-time in order to mitigate the blockage effects. We validate this claim by analysing the expected data rate of a mmWave system, under a range of blockage scenarios. We show that different blockage scenarios may require different numerologies to produce best performance, and that the correct choice of numerology may improve this performance by as much as hundreds of Mbps. Our results carry insights important for the design of blockage-aware scheduling mechanisms for 5G.

cs.IT↗

Coverage and Spectral Efficiency of Indoor mmWave Networks with Ceiling-Mounted Access Points

Provisioning of high throughput millimetre-wave signal to indoor areas that potentially serve a large number of users, such as transportation hubs or convention centres, will require dedicated indoor millimetre-wave access point deployments. In this article, we study dense deployments of millimetre-wave access points mounted on the ceiling and illuminating selected spots on the ground with the use of fixed directional antennas. In this setup, the main factor limiting signal propagation are blockages by human bodies. We evaluate our system under a number of scenarios that take into account beamwidth of the main-lobe, access point density, and positioning of the mobile device with respect to the user's body. We find that both coverage and area spectral efficiency curves exhibit non-trivial behaviour which can be classified into four regions related to the selection of access point density, beamwidth, and height values. Furthermore, we observe a trade-off in beamwidth design, as the optimal beamwidth maximizes either coverage or area spectral efficiency, but not both. Finally, when we consider different body shadowing scenarios, our network design optimizes coverage or area spectral efficiency performance towards either devices held in hand or worn directly against the body, as each of the scenarios requires mutually exclusive settings of access point density and beamwidth.

cs.IT↗