J. Teichert | arXiv Science

arXiv2026

Continuous-Wave Operation at 30 MV/m of a Superconducting Radio-Frequency Gun Cryomodule with an Exchangeable Cathode Plug

A prototype 185.7 MHz superconducting radio-frequency (SRF) electron gun cryomodule has been developed for the proposed LCLS-II-HE Low Emittance Injector at SLAC. It has an in-situ ultra-high-vacuum exchangeable cathode plug system compatible with semiconductor photocathodes. With a copper plug, the gun achieved continuous-wave RF operation at a cathode field of 30 MV/m. No measurable degradation was observed after plug removal and reinsertion with the cavity at 4.4 K. This result is a significant improvement over past continuous-wave SRF gun systems with exchangeable plugs.

physics.acc-ph↗

arXiv2022

The application of encoder-decoder neural networks in high accuracy and efficiency slit-scan emittance measurements

A superconducting radio-frequency (SRF) photo injector is in operation at the electron linac for beams with high brilliance and low emittance (ELBE) radiation center and generates continuous wave (CW) electron beams with high average current and high brightness for user operation since 2018. The speed of emittance measurement at the SRF gun beamline can be increased by improving the slit-scan system, thus the measurement time for one phase space mapping can be shortened from about 15 minutes to 90 seconds. A parallel algorithm and machine learning have been used to reduce the beamlet image noise. In order to estimate the uncertainty in the calculation of normalized emittance, we analyze the main error contributions such as slit position uncertainty, image noise, space charge effects and energy measurement inaccuracy.

physics.acc-ph↗