arXiv subjects

J. Sinclair

Publications and source records attributed to J. Sinclair.

8 recordsLinked to original sources

arXiv2023

A laserball calibration device for the SNO+ scintillator phase

Located 2 km underground in SNOLAB, Sudbury, Canada, SNO+ is a large scale liquid scintillator experiment that primarily aims to search for neutrinoless double beta decay. Whilst SNO+ has light and radioactive calibration sources external to the inner volume, an internally deployed optical source is necessary for the full characterization of the detector model. A laser diffuser ball developed for SNO has previously demonstrated to be an effective optical calibration device for both SNO and SNO+ water phase. Since the introduction of liquid scintillator for SNO+, the material compatibility, cleanliness, and radiopurity requirements of any materials in contact with the internal medium have increased. Improving on the original SNO laserball design, a new laserball calibration device has been developed for the SNO+ scintillator phase with the goal of measuring the optical properties of the detector and performing routine PMT gain and timing calibrations. Simulations have been written to model the diffusion properties to optimise optical and temporal performance for calibration. Prototype laserballs have been built and characterised, demonstrating sub-ns timing resolution and a quasi-isotropic light distribution

physics.ins-det↗

arXiv2022

Model-independent determination of the dipole response of $^{66}$Zn using quasi-monoenergetic and linearly-polarized photon beams

[Background] Photon strength functions are an important ingredient in calculations relevant for the nucleosynthesis of heavy elements. The relation to the photoabsorption cross section allows to experimentally constrain photon strength functions by investigating the photo-response of atomic nuclei. [Purpose] We determine the photoresponse of $^{66}$Zn in the energy region of 5.6 MeV to 9.9 MeV and analyze the contribution of the "elastic" decay channel back to the ground state. In addition, for the elastic channel electric and magnetic dipole transitions were separated. [Methods] Nuclear resonance fluorescence experiments were performed using a linearly-polarized quasi-monoenergetic photon beam at the High Intensity $\gamma$-ray Source. Photon beam energies from 5.6 to 9.9 MeV with an energy spread of about 3% were selected in steps of 200-300 keV. Two High Purity Germanium detectors were used for the subsequent $\gamma$-ray spectroscopy. [Results] Full photoabsorption cross sections are extracted from the data making use of the monoenergetic character of the photon beam. For the ground-state decay channel, the average contribution of electric and magnetic dipole strengths is disentangled. The average branching ratio back to the ground state is determined as well. [Conclusions] The new results indicate lower cross sections when compared to the values extracted from a former experiment using bremsstrahlung on $^{66}$Zn. In the latter, the average branching ratio to the ground state is estimated from statistical-model calculations in order to analyze the data. Corresponding estimates from statistical-model calculations underestimate this branching ratio compared to the values extracted from the present analysis, which would partly explain the high cross sections determined from the bremsstrahlung data.

nucl-ex↗

arXiv2020

Structure of high-lying levels populated in the $^{96}$Y $\rightarrow ^{96}$Zr $\beta$ decay

The nature of $J^{\pi}=1^-$ levels of $^{96}$Zr below the $\beta$-decay $Q_{\beta}$ value of $^{96}$Y has been investigated in high-resolution $\gamma$-ray spectroscopy following the $\beta$ decay as well as in a campaign of inelastic photon scattering experiments. Branching ratios extracted from $\beta$ decay allow the absolute $E1$ excitation strength to be determined for levels populated in both reactions. The combined data represents a comprehensive approach to the wavefunction of $1^-$ levels below the $Q_{\beta}$ value, which are investigated in the theoretical approach of the Quasiparticle Phonon Model. This study clarifies the nuclear structure properties associated with the enhanced population of high-lying levels in the $^{96}$Y$_{gs}$ $\beta$ decay, one of the three most important contributors to the high-energy reactor antineutrino spectrum.

nucl-ex↗

arXiv2020

The observation of vibrating pear shapes in radon nuclei: update

There is a large body of evidence that atomic nuclei can undergo octupole distortion and assume the shape of a pear. This phenomenon is important for measurements of electric-dipole moments of atoms, which would indicate CP violation and hence probe physics beyond the standard model of particle physics. Isotopes of both radon and radium have been identified as candidates for such measurements. Here, we have observed the low-lying quantum states in $^{224}$Rn and $^{226}$Rn by accelerating beams of these radioactive nuclei. We report here additional states not assigned in our 2019 publication. We show that radon isotopes undergo octupole vibrations but do not possess static pear-shapes in their ground states. We conclude that radon atoms provide less favourable conditions for the enhancement of a measurable atomic electric-dipole moment.

nucl-ex↗

arXiv2020

Evolution of Octupole Deformation in Radium Nuclei from Coulomb Excitation of Radioactive $^{222}$Ra and $^{228}$Ra Beams

There is sparse direct experimental evidence that atomic nuclei can exhibit stable pear shapes arising from strong octupole correlations. In order to investigate the nature of octupole collectivity in radium isotopes, electric octupole ($E3$) matrix elements have been determined for transitions in $^{222,228}$Ra nuclei using the method of sub-barrier, multi-step Coulomb excitation. Beams of the radioactive radium isotopes were provided by the HIE-ISOLDE facility at CERN. The observed pattern of $E$3 matrix elements for different nuclear transitions is explained by describing $^{222}$Ra as pear-shaped with stable octupole deformation, while $^{228}$Ra behaves like an octupole vibrator.

nucl-ex↗

arXiv2018

Assessing the long-term variability of acetylene and ethane in the stratosphere of Jupiter

Acetylene (C$_2$H$_2$) and ethane (C$_2$H$_6$) are both produced in the stratosphere of Jupiter via photolysis of methane (CH$_4$). Despite this common source, the latitudinal distribution of the two species is radically different, with acetylene decreasing in abundance towards the pole, and ethane increasing towards the pole. We present six years of NASA IRTF TEXES mid-infrared observations of the zonally-averaged emission of methane, acetylene and ethane. We confirm that the latitudinal distributions of ethane and acetylene are decoupled, and that this is a persistent feature over multiple years. The acetylene distribution falls off towards the pole, peaking at $\sim$30$^{\circ}$N with a volume mixing ratio (VMR) of $\sim$0.8 parts per million (ppm) at 1 mbar and still falling off at $\pm70^\circ$ with a VMR of $\sim$0.3 ppm. The acetylene distributions are asymmetric on average, but as we move from 2013 to 2017, the zonally-averaged abundance becomes more symmetric about the equator. We suggest that both the short term changes in acetylene and its latitudinal asymmetry is driven by changes to the vertical stratospheric mixing, potentially related to propagating wave phenomena. Unlike acetylene, ethane has a symmetric distribution about the equator that increases toward the pole, with a peak mole fraction of $\sim$18 ppm at about $\pm50^{\circ}$ latitude, with a minimum at the equator of $\sim$10 ppm at 1 mbar. [...] The equator-to-pole distributions of acetylene and ethane are consistent with acetylene having a shorter lifetime than ethane that is not sensitive to longer advective timescales, but is augmented by short-term dynamics, such as vertical mixing. Conversely, the long lifetime of ethane allows it to be transported to higher latitudes faster than it can be chemically depleted.

astro-ph.EP↗

arXiv2016

Multi-channel front-end board for SiPM readout

We describe a novel high-speed front-end electronic board (FEB) for interfacing an array of 32 Silicon Photo-multipliers (SiPM) with a computer. The FEB provides individually adjustable bias on the SiPMs, and performs low-noise analog signal amplification, conditioning and digitization. It provides event timing information accurate to 1.3 ns RMS. The back-end data interface is realized on the basis of 100 Mbps Ethernet. The design allows daisy-chaining of up to 256 units into one network interface, thus enabling compact and efficient readout schemes for multi-channel scintillating detectors, using SiPMs as photo-sensors.

physics.ins-det↗

arXiv2014

The calibration system for the photomultiplier array of the SNO+ experiment

A light injection system using LEDs and optical fibres was designed for the calibration and monitoring of the photomultiplier array of the SNO+ experiment at SNOLAB. Large volume, non-segmented, low-background detectors for rare event physics, such as the multi-purpose SNO+ experiment, need a calibration system that allow an accurate and regular measurement of the performance parameters of their photomultiplier arrays, while minimising the risk of radioactivity ingress. The design implemented for SNO+ uses a set of optical fibres to inject light pulses from external LEDs into the detector. The design, fabrication and installation of this light injection system, as well as the first commissioning tests, are described in this paper. Monte Carlo simulations were compared with the commissioning test results, confirming that the system meets the performance requirements.

physics.ins-det↗