arXiv subjects

J. Priede

Publications and source records attributed to J. Priede.

11 recordsLinked to original sources

arXiv2026

Ponomarenko dynamo sustained by a free swirling jet

We present numerical results on dynamo action in a flow driven by an azimuthal body force localized near the end of an elongated cylindrical container. The analysis focuses on the central region of the cylinder, where axial variations in the flow are relatively weak, allowing the magnetic field to be represented as a helically traveling wave. Four magnetic impeller configurations and multiple forcing intensities are examined. In all cases, the velocity profiles in the central region display a similar \propto r^{-2} dependence across a wide range of Reynolds numbers and forcing region widths. The magnetic field is found to start growing under conditions similar to those of the Riga dynamo. However, the growing modes exhibit a substantial nonzero group velocity, indicating that the associated instability is convective: the flow can amplify an externally applied magnetic field but cannot sustain it autonomously. We outline several approaches for overcoming this limitation in order to realize a working laboratory dynamo based on an internally unconstrained swirling jet-type flow.

physics.geo-ph↗

arXiv2023

Optimizing helical disc dynamo

We present an optimized design of our recently realized helical disc dynamo. Like the original set-up, the optimized dynamo consists of a flat multi-arm spiral coil and a co-axially placed disc which is connected to the former by sliding liquid metal contacts. In contrast to the original set-up, the disc and the coil in the optimized design have different sizes. This allows the disc to capture more of the high-density magnetic flux generated in the inner part of the coil and to avoid the reverse flux in the outer part of the coil. By optimizing the coil and dics radii, the critical magnetic Reynolds number can be reduced from ${\mathit Rm}\approx34.6$ when the disc and coil have equal inner and outer radii with the ratio $r_{i}/r_{o}\approx0.36$ to ${\mathit Rm}\approx11.6.$ This lowest possible disc dynamo threshold is attained when the disc and coil have relatively narrow widths. Using a slightly suboptimal but more practical set-up with the inner and outer radii of the disc and coil equal to to $(0.3,0.9)$ and $(0.74,1),$ respectively, self-excitation is expected at ${\mathit Rm}\approx14.6.$

physics.class-ph↗

arXiv2017

A homopolar disc dynamo experiment with liquid metal contacts

We present experimental results of a homopolar disc dynamo constructed at CICATA-Querétaro in Mexico. The device consists of a flat, multi-arm spiral coil which is placed above a fast-spinning metal disc and connected to the latter by sliding liquid-metal electrical contacts. Theoretically, self-excitation of the magnetic field is expected at the critical magnetic Reynolds number Rm~45, which corresponds to a critical rotation rate of about 10 Hz. We measured the magnetic field above the disc and the voltage drop on the coil for the rotation rate up to 14 Hz, at which the liquid metal started to leak from the outer sliding contact. Instead of the steady magnetic field predicted by the theory we detected a strongly fluctuating magnetic field with a strength comparable to that of Earth's magnetic field which was accompanied by similar voltage fluctuations in the coil. These fluctuations seem to be caused by the intermittent electrical contact through the liquid metal. The experimental results suggest that the dynamo with the actual electrical resistance of liquid metal contacts could be excited at the rotation rate of around 21 Hz provided that the leakage of liquid metal is prevented.

physics.geo-ph↗

arXiv2014

The influence of current collectors on Tayler instability and electro-vortex flows in liquid metal batteries

The Tayler instability is a kink-type flow instability which occurs when the electrical current through a conducting fluid exceeds a certain critical value. Originally studied in the astrophysical context, the instability was recently shown to be also a limiting factor for the upward scalability of liquid metal batteries. In this paper, we continue our efforts to simulate this instability for liquid metals within the framework of an integro-differential equation approach. The original solver is enhanced by multi-domain support with Dirichlet-Neumann partitioning for the static boundaries. Particular focus is laid on the detailed influence of the axial electrical boundary conditions on the characteristic features of the Tayler instability, and, secondly, on the occurrence of electro-vortex flows and their relevance for liquid metal batteries.

physics.flu-dyn↗

arXiv2013

Velocity measurements in the liquid metal flow driven by a two-phase inductor

We present the results of velocity measurements obtained by ultrasonic Doppler velocimetry and local potential probes in the flow of GaInSn eutectic melt driven by a two-phase inductor in a cylindrical container. This type of flow is expected in a recent modification to the floating zone technique for the growth of small-diameter single intermetallic compound crystals. We show that the flow structure can be changed from the typical two toroidal vortices to a single vortex by increasing the phase shift between the currents in the two coils from 0 to 90 degrees. The latter configuration is thought to be favourable for the growth of single crystals. The flow is also computed numerically and a reasonable agreement with the experimental results is found. The obtained results may be useful for the design of combined two-phase electromagnetic stirrers and induction heaters for metal or semiconductor melts.

physics.flu-dyn↗

arXiv2009

Linear stability of Hunt's flow

We analyse numerically the linear stability of the fully developed flow of a liquid metal in a rectangular duct subject to a transverse magnetic field. The walls of the duct perpendicular to the magnetic field are perfectly conducting whereas the parallel ones are insulating. In a sufficiently strong magnetic field, the flow consists of two jets at the insulating walls and a near-stagnant core. We use a vector stream function formulation and Chebyshev collocation method to solve the eigenvalue problem for small-amplitude perturbations. Due to the two-fold reflection symmetry of the base flow the disturbances with four different parity combinations over the duct cross-section decouple from each other. Magnetic field renders the flow in a square duct linearly unstable at the Hartmann number Ha 5.7 with respect to a disturbance whose vorticity component along the magnetic field is even across the field and odd along it. For this mode, the minimum of the critical Reynolds number Re_c 2018, based on the maximal velocity, is attained at Ha ~ 10. Further increase of the magnetic field stabilises this mode with Re_c growing approximately as Ha. For Ha>40, the spanwise parity of the most dangerous disturbance reverses across the magnetic field. At Ha ~ 46 a new pair of most dangerous disturbances appears with the parity along the magnetic field being opposite to that of the previous two modes. The critical Reynolds number, which is very close for both of these modes, attains a minimum Re_c ~ 1130 at Ha ~ 70 and increases as Re_c ~ Ha^1/2 for Ha >> 1. The asymptotics of the critical wavenumber is k_c ~ 0.525Ha^1/2 while the critical phase velocity approaches 0.475 of the maximum jet velocity.

physics.flu-dyn↗

arXiv2006

Boundary-integral method for poloidal axisymmetric AC magnetic fields

This paper presents a boundary-integral equation (BIE) method for the calculation of poloidal axisymmetric magnetic fields applicable in a wide range of ac frequencies. The method is based on the vector potential formulation and it uses the Green's functions of Laplace and Helmholtz equations for the exterior and interior of conductors, respectively. The work is particularly focused on a calculation of axisymmetric Green's function for the Helmholtz equation which is both simpler and more accurate compared to previous approaches. Three different approaches are used for calculation of the Green's function depending on the parameter range. For low and high dimensionless ac frequencies we use a power series expansion in terms of elliptical integrals and an asymptotic series in terms of modified Bessel functions of second kind, respectively. For the intermediate frequency range, Gauss-Chebyshev-Lobatto quadratures are used. The method is verified by comparing with the analytical solution for a sphere in a uniform external ac field. The application of the method is demonstrated for a composite model inductor containing an external secondary circuit.

physics.comp-ph↗

arXiv2006

Paradox of inductionless magnetorotational instability in a Taylor-Couette flow with a helical magnetic field

We consider the magnetorotational instability (MRI) of a hydrodynamically stable Taylor-Couette flow with a helical external magnetic field in the inductionless approximation defined by a zero magnetic Prandtl number ($\Pm=0)$. This leads to a considerable simplification of the problem eventually containing only hydrodynamic variables. First, we point out that the energy of any perturbation growing in the presence of magnetic field has to grow faster without the field. This is a paradox because the base flow is stable without the magnetic while it is unstable in the presence of a helical magnetic field without being modified by the latter as it has been found recently by Hollerbach and Rudiger [Phys. Rev. Lett. 95, 124501 (2005)]. We revisit this problem by using a Chebyshev collocation method to calculate the eigenvalue spectrum of the linearized problem. In this way, we confirm that MRI with helical magnetic field indeed works in the inductionless limit where the destabilization effect appears as an effective shift of the Rayleigh line. Second, we integrate the linearized equations in time to study the transient behavior of small amplitude perturbations, thus showing that the energy arguments are correct as well. However, there is no real contradiction between both facts. The linear stability theory predicts the asymptotic development of an arbitrary small-amplitude perturbation, while the energy stability theory yields the instant growth rate of any particular perturbation, but it does not account for the evolution of this perturbation.

physics.flu-dyn↗

arXiv2006

Stability of an electromagnetically levitated spherical sample in a set of coaxial circular loops

This paper presents a theoretical study of oscillatory and rotational instabilities of a solid spherical body, levitated electromagnetically in axisymmetric coils made of coaxial circular loops. We apply our previous theory to analyze the static and dynamic stability of the sample depending on the ac frequency and the position of the sample in the coils for several simple configurations. We introduce an original analytical approach employing a gauge transformation for the vector potential. First, we calculate the spring constants that define the frequency of small-amplitude oscillations. For static stability, the spring constants must be positive. Dynamic instabilities are characterized by critical ac frequencies that, when exceeded, may result either in a spin-up or oscillations with increasing amplitude. We found that the critical frequencies increase with the nonuniformity of the field. We show that for a spherically harmonic field, the critical frequency for the spin-up instability in a field of degree $l$ coincides with the critical frequency for the oscillatory instability in a field of degree $l+1$.

physics.class-ph↗

arXiv2006

Edge pinch instability of liquid metal sheet in a transverse high-frequency AC magnetic field

We analyze the linear stability of the edge of a thin liquid metal layer subject to a transverse high-frequency AC magnetic field. The layer is treated as a perfectly conducting liquid sheet that allows us to solve the problem analytically for both a semi-infinite geometry with a straight edge and a thin disk of finite radius. It is shown that the long-wave perturbations of a straight edge are monotonically unstable when the wave number exceeds some critical value $k_c,$ which is determined by the surface tension and the linear density of the electromagnetic force acting on the edge. The higher the density of electromagnetic force, the shorter the critical wavelength. The perturbations with wavelength shorter than the critical are stabilized by the surface tension, whereas the growth rate of long wave perturbations reduces as $\sim k$ for wave numbers $k\to 0$. Thus, there is the fastest growing perturbation with the wave number $k_\max=2/3 k_c$. By applying the general approach developed for the semi-infinite sheet, we find that a circular disk becomes linearly unstable with respect to exponentially growing perturbation with the azimuthal wave number $m=2$ when the magnetic Bond number exceeds $Bm_c=3π$. The instability characteristics agree well with the experimental data.

physics.flu-dyn↗

arXiv2006

Breakdown of Burton-Prim-Slichter approach and lateral solute segregation in radially converging flows

A theoretical study is presented of the effect of a radially converging melt flow, which is directed away from the solidification front, on the radial solute segregation in simple solidification models. We show that the classical Burton-Prim-Slichter (BPS) solution describing the effect of a diverging flow on the solute incorporation into the solidifying material breaks down for the flows converging along the solidification front. The breakdown is caused by a divergence of the integral defining the effective boundary layer thickness which is the basic concept of the BPS theory. Although such a divergence can formally be avoided by restricting the axial extension of the melt to a layer of finite height, radially uniform solute distributions are possible only for weak melt flows with an axial velocity away from the solidification front comparable to the growth rate. There is a critical melt velocity for each growth rate at which the solution passes through a singularity and becomes physically inconsistent for stronger melt flows. To resolve these inconsistencies we consider a solidification front presented by a disk of finite radius $R_0$ subject to a strong converging melt flow and obtain an analytic solution showing that the radial solute concentration depends on the radius $r$ as $\sim\ln^{1/3}(R_0/r)$ and $\sim\ln(R_0/r)$ close to the rim and at large distances from it. The logarithmic increase of concentration is limited in the vicinity of the symmetry axis by the diffusion becoming effective at a distance comparable to the characteristic thickness of the solute boundary layer. The converging flow causes a solute pile-up forming a logarithmic concentration peak at the symmetry axis which might be an undesirable feature for crystal growth processes.

physics.flu-dyn↗