arXiv subjects

J. Joseph

Publications and source records attributed to J. Joseph.

12 recordsLinked to original sources

arXiv2022

Conceptual Design of the Modular Detector and Readout System for the CMB-S4 survey experiment

We present the conceptual design of the modular detector and readout system for the Cosmic Microwave Background Stage 4 (CMB-S4) ground-based survey experiment. CMB-S4 will map the cosmic microwave background (CMB) and the millimeter-wave sky to unprecedented sensitivity, using 500,000 superconducting detectors observing from Chile and Antarctica to map over 60 percent of the sky. The fundamental building block of the detector and readout system is a detector module package operated at 100 mK, which is connected to a readout and amplification chain that carries signals out to room temperature. It uses arrays of feedhorn-coupled orthomode transducers (OMT) that collect optical power from the sky onto dc-voltage-biased transition-edge sensor (TES) bolometers. The resulting current signal in the TESs is then amplified by a two-stage cryogenic Superconducting Quantum Interference Device (SQUID) system with a time-division multiplexer to reduce wire count, and matching room-temperature electronics to condition and transmit signals to the data acquisition system. Sensitivity and systematics requirements are being developed for the detector and readout system over a wide range of observing bands (20 to 300 GHz) and optical powers to accomplish CMB-S4's science goals. While the design incorporates the successes of previous generations of CMB instruments, CMB-S4 requires an order of magnitude more detectors than any prior experiment. This requires fabrication of complex superconducting circuits on over 10 square meters of silicon, as well as significant amounts of precision wiring, assembly and cryogenic testing.

astro-ph.IM↗

arXiv2018

Characterization of the ePix100a and the FastCCD Semiconductor Detectors for the European XFEL

The European X-ray Free Electron Laser (EuXFEL) is a research facility providing spatially coherent X-ray flashes in the energy range from 0.25keV to 25keV of unprecedented brilliance and with unique time structure: X-ray pulses with a 4.5 MHz repetition rate arranged in trains with 2700 pulses every 100 ms. The facility operates three photon beamlines called SASE 1, SASE 2 and SASE 3. Each of the beamlines is hosting two scientific experiments. The SASE 1 beamline started its user operation in September 2017, followed by successful first lasing at the SASE 2 beamline in May 2018. Early user experiments are planned to start in 2019 at this beamline, while early user experiments for the SASE 3 beamline are scheduled for the end of 2018. The quality of the experimental data will gain substantial benefits from an accurate characterization and calibration of the X-ray detectors. Supplementing high repetition rate detectors at MHz speeds, slower detectors such as the ePix100a and the FastCCD will be operated at the train repetition rate of 10 Hz. These 2D silicon pixelized detectors use fast parallel column-wise readout implemented as a CCD or as a hybrid pixel detector. In the following, characterization and analysis approaches for the FastCCD and the ePix100a detectors are discussed and the performance of the detectors is evaluated using appropriate state-of-the-art analysis techniques.

physics.ins-det↗

arXiv2016

The Australian Square Kilometre Array Pathfinder: Performance of the Boolardy Engineering Test Array

We describe the performance of the Boolardy Engineering Test Array (BETA), the prototype for the Australian Square Kilometre Array Pathfinder telescope ASKAP. BETA is the first aperture synthesis radio telescope to use phased array feed technology, giving it the ability to electronically form up to nine dual-polarization beams. We report the methods developed for forming and measuring the beams, and the adaptations that have been made to the traditional calibration and imaging procedures in order to allow BETA to function as a multi-beam aperture synthesis telescope. We describe the commissioning of the instrument and present details of BETA's performance: sensitivity, beam characteristics, polarimetric properties and image quality. We summarise the astronomical science that it has produced and draw lessons from operating BETA that will be relevant to the commissioning and operation of the final ASKAP telescope.

astro-ph.IM↗

arXiv2015

Enceladus's measured physical libration requires a global subsurface ocean

Several planetary satellites apparently have subsurface seas that are of great interest for, among other reasons, their possible habitability. The geologically diverse Saturnian satellite Enceladus vigorously vents liquid water and vapor from fractures within a south polar depression and thus must have a liquid reservoir or active melting. However, the extent and location of any subsurface liquid region is not directly observable. We use measurements of control points across the surface of Enceladus accumulated over seven years of spacecraft observations to determine the satellite's precise rotation state, finding a forced physical libration of 0.120 $\pm$ 0.014° (2σ). This value is too large to be consistent with Enceladus's core being rigidly connected to its surface, and thus implies the presence of a global ocean rather than a localized polar sea. The maintenance of a global ocean within Enceladus is problematic according to many thermal models and so may constrain satellite properties or require a surprisingly dissipative Saturn.

astro-ph.EP↗

arXiv2015

Discovery of HI gas in a young radio galaxy at $z = 0.44$ using the Australian Square Kilometre Array Pathfinder

We report the discovery of a new 21-cm HI absorption system using commissioning data from the Boolardy Engineering Test Array of the Australian Square Kilometre Array Pathfinder (ASKAP). Using the 711.5 - 1015.5 MHz band of ASKAP we were able to conduct a blind search for the 21-cm line in a continuous redshift range between $z = 0.4$ and 1.0, which has, until now, remained largely unexplored. The absorption line is detected at $z = 0.44$ towards the GHz-peaked spectrum radio source PKS B1740$-$517 and demonstrates ASKAP's excellent capability for performing a future wide-field survey for HI absorption at these redshifts. Optical spectroscopy and imaging using the Gemini-South telescope indicates that the HI gas is intrinsic to the host galaxy of the radio source. The narrow OIII emission lines show clear double-peaked structure, indicating either large-scale outflow or rotation of the ionized gas. Archival data from the \emph{XMM-Newton} satellite exhibit an absorbed X-ray spectrum that is consistent with a high column density obscuring medium around the active galactic nucleus. The HI absorption profile is complex, with four distinct components ranging in width from 5 to 300 km s$^{-1}$ and fractional depths from 0.2 to 20 per cent. In addition to systemic HI gas, in a circumnuclear disc or ring structure aligned with the radio jet, we find evidence for a possible broad outflow of neutral gas moving at a radial velocity of $v \sim 300$ km s$^{-1}$. We infer that the expanding young radio source ($t_{\rm age} \approx 2500$ yr) is cocooned within a dense medium and may be driving circumnuclear neutral gas in an outflow of $\sim$ 1 $\mathrm{M}_{\odot}$ yr$^{-1}$.

astro-ph.GA↗

arXiv2014

The Australian Square Kilometre Array Pathfinder: System Architecture and Specifications of the Boolardy Engineering Test Array

This paper describes the system architecture of a newly constructed radio telescope - the Boolardy Engineering Test Array, which is a prototype of the Australian Square Kilometre Array Pathfinder telescope. Phased array feed technology is used to form multiple simultaneous beams per antenna, providing astronomers with unprecedented survey speed. The test array described here is a 6-antenna interferometer, fitted with prototype signal processing hardware capable of forming at least 9 dual-polarisation beams simultaneously, allowing several square degrees to be imaged in a single pointed observation. The main purpose of the test array is to develop beamforming and wide-field calibration methods for use with the full telescope, but it will also be capable of limited early science demonstrations.

astro-ph.IM↗

arXiv2012

Frequency Multiplexed SQUID Readout of Large Bolometer Arrays for Cosmic Microwave Background Measurements

A technological milestone for experiments employing Transition Edge Sensor (TES) bolometers operating at sub-kelvin temperature is the deployment of detector arrays with 100s--1000s of bolometers. One key technology for such arrays is readout multiplexing: the ability to read out many sensors simultaneously on the same set of wires. This paper describes a frequency-domain multiplexed readout system which has been developed for and deployed on the APEX-SZ and South Pole Telescope millimeter wavelength receivers. In this system, the detector array is divided into modules of seven detectors, and each bolometer within the module is biased with a unique ~MHz sinusoidal carrier such that the individual bolometer signals are well separated in frequency space. The currents from all bolometers in a module are summed together and pre-amplified with Superconducting Quantum Interference Devices (SQUIDs) operating at 4 K. Room-temperature electronics demodulate the carriers to recover the bolometer signals, which are digitized separately and stored to disk. This readout system contributes little noise relative to the detectors themselves, is remarkably insensitive to unwanted microphonic excitations, and provides a technology pathway to multiplexing larger numbers of sensors.

astro-ph.IM↗

arXiv2011

Universal Quantum Viscosity in a Unitary Fermi Gas

A Fermi gas of atoms with resonant interactions is predicted to obey universal hydrodynamics, where the shear viscosity and other transport coefficients are universal functions of the density and temperature. At low temperatures, the viscosity has a universal quantum scale $\hbar n$ where $n$ is the density, while at high temperatures the natural scale is $p_T^3/\hbar^2$ where $p_T$ is the thermal momentum. We employ breathing mode damping to measure the shear viscosity at low temperature. At high temperature $T$, we employ anisotropic expansion of the cloud to find the viscosity, which exhibits precise $T^{3/2}$ scaling. In both experiments, universal hydrodynamic equations including friction and heating are used to extract the viscosity. We estimate the ratio of the shear viscosity to the entropy density and compare to that of a perfect fluid.

cond-mat.quant-gas↗

arXiv2008

Alignment of the Pixel and SCT Modules for the 2004 ATLAS Combined Test Beam

A small set of final prototypes of the ATLAS Inner Detector silicon tracker (Pixel and SCT) were used to take data during the 2004 Combined Test Beam. Data were collected from runs with beams of different flavour (electrons, pions, muons and photons) with a momentum range of 2 to 180 GeV/c. Four independent methods were used to align the silicon modules. The corrections obtained were validated using the known momenta of the beam particles and were shown to yield consistent results among the different alignment approaches. From the residual distributions, it is concluded that the precision attained in the alignment of the silicon modules is of the order of 5 micrometers in their most precise coordinate.

physics.ins-det↗

arXiv2007

Is a gas of strongly interacting atomic fermions a nearly perfect fluid?

We use all-optical methods to produce a highly-degenerate Fermi gas of spin-1/2 $^6$Li atoms. A magnetic field tunes the gas near a collisional (Feshbach) resonance, producing strong interactions between spin-up and spin-down atoms. This atomic gas is a paradigm for strong interactions in nature, and provides tests of current quantum many-body calculational methods for diverse systems, including very high temperature superconductors, nuclear matter in neutron stars, and the quark-gluon plasma of the Big Bang. We have measured properties of a breathing mode over a wide range of temperatures. At temperatures both below and well above the superfluid transition, the frequency of the mode is nearly constant and very close to the hydrodynamic value. However, explaining both the frequency and the damping rate in the normal collisional regime has not been achieved. Our measurements of the damping rate as a function of the energy of the gas are used to estimate an upper bound on the viscosity. Using our new measurements of the entropy of the gas, we estimate the ratio of the shear viscosity to the entropy density, and compare the result with the lower bound for quantum viscosity recently predicted using string theory methods.

cond-mat.other↗

arXiv2006

Sound propagation in a Fermi gas near a Feshbach resonance

Sound waves are observed and studied in an optically trapped degenerate Fermi gas of spin-up and spin-down atoms with magnetically tunable interactions. Measurements are made throughout the crossover region, from a weakly-interacting Fermi gas through the resonant Fermi superfluid regime to a Bose condensate of dimer molecules. The measured sound velocities test the equation of state and confirm the universal hypothesis.

cond-mat.other↗

arXiv2006

Measurement of the Entropy and Critical Temperature of a Strongly Interacting Fermi Gas

We report a model-independent measurement of the entropy, energy, and critical temperature of a degenerate, strongly interacting Fermi gas of atoms. The total energy is determined from the mean square cloud size in the strongly interacting regime, where the gas exhibits universal behavior. The entropy is measured by sweeping a bias magnetic field to adiabatically tune the gas from the strongly interacting regime to a weakly interacting regime, where the entropy is known from the cloud size after the sweep. The dependence of the entropy on the total energy quantitatively tests predictions of the finite-temperature thermodynamics.

cond-mat.other↗