arXiv subjects

J. Collins

Publications and source records attributed to J. Collins.

At least 19 recordsLinked to original sources

arXiv2026

LIGO Detector Characterization in the Second and Third Parts of the Fourth Observing Run

LIGO detector characterization efforts enabled the confident detection of gravitational waves from hundreds of compact binary coalescences during the fourth observing run. Reliable production of high quality detector data and rapid noise mitigation efforts allow the extraction of the most in-depth knowledge of gravitational wave sources and their progenitors. In this paper we describe LIGO detector characterization activities during the second and third parts of O4-O4b and O4c. We summarize changes in detector configuration and performance at the LIGO Hanford and LIGO Livingston Observatories between the end of the first part of O4a and the end of O4c, including upgrades made during the commissioning break preceding O4b and during repairs performed in O4c. We describe instrumental investigations carried out at both sites designed to understand and subsequently mitigate the effect on detector sensitivity of transient glitches, narrowband spectral lines, and vibration-driven noise, among other data quality concerns. We then review the tools and procedures used to validate gravitational wave candidates and the data quality products thus supplied to searches for gravitational waves from compact binary coalescences and unmodeled transients, continuous gravitational waves, and the stochastic gravitational wave background. The efforts of the detector characterization group are essential for maintaining and improving the sensitivity and reliability of the LIGO detectors especially as observing runs lengthen and more events are detected. We conclude with prospects for LIGO detector characterization activities in future observing runs.

astro-ph.IM↗

arXiv2026

Narrow spectral artifact investigation and mitigation in LIGO data from the fourth LIGO-Virgo-KAGRA observing run

We present efforts to identify, characterize, and mitigate narrow spectral artifacts in LIGO detector data during the fourth LIGO-Virgo-KAGRA observing run. Narrow spectral artifacts in gravitational-wave detectors are non-astrophysical noise sources that can degrade searches for narrowband persistent gravitational waves. Identifying and, where possible, mitigating these noise sources is one of the core efforts of the LIGO Detector Characterization group. Key software tools have been updated and new tools deployed for the fourth LIGO-Virgo-KAGRA observing run to facilitate investigations and data monitoring. We discuss these tool upgrades, and present several identified narrowband artifacts that have been successfully investigated and mitigated in LIGO data. Regardless of whether artifacts are mitigated or not, narrowband persistent gravitational-wave searches require information on which frequency bands contain non-astrophysical artifacts. Minimizing the number of bands containing non-astrophysical artifacts is essential to maximize the potential for discovery of a new class of gravitational-wave signals.

astro-ph.IM↗

arXiv2025

ExoClock Project IV: A homogeneous catalogue of 620 updated exoplanet ephemerides

The ExoClock project is an open platform aiming to monitor exoplanets by integrating observations from space and ground based telescopes. This study presents an updated catalogue of 620 exoplanet ephemerides, integrating 30000 measurements from ground-based telescopes (the ExoClock network), literature, and space telescopes (Kepler, K2 and TESS). The updated catalogue includes 277 planets from TESS which require special observing strategies due to their shallow transits or bright host stars. This study demonstrates that data from larger telescopes and the employment of new methodologies such as synchronous observations with small telescopes, are capable of monitoring special cases of planets. The new ephemerides show that 45% of the planets required an update while the results show an improvement of one order of magnitude in prediction uncertainty. The collective analysis also enabled the identification of new planets showing TTVs, highlighting the importance of extensive observing coverage. Developed in the context of the ESA's Ariel space mission, with the goal of delivering a catalogue with reliable ephemerides to increase the mission efficiency, ExoClock's scope and service have grown well beyond the remit of Ariel. The ExoClock project has been operating in the framework of open science, and all tools and products are accessible to everyone within academia and beyond, to support efficient scheduling of future exoplanet observations, especially from larger telescopes where the pressure for time allocation efficiency is higher (Ariel, JWST, VLT, ELT, Subaru etc). The inclusion of diverse audiences in the process and the collaborative mode not only foster democratisation of science but also enhance the quality of the results.

astro-ph.EP↗

arXiv2025

MPGD with a 3D-printed Thick-GEM as sole gain element

We present the first micropattern gaseous detector that employs a small 3D-printed Thick-GEM as its sole gain element. The detector can achieve sufficient gas gain for regular operation without the need for pre-amplification by additional gain elements. We describe the design, quality control, assembly, and test of this detector. The 10 cm $\times$ 10 cm active area of the Thick-GEM features three separate sectors with different sizes of the clearance rim annuli (0.1 mm, 0.15 mm, 0.2 mm) around the 0.7 mm diameter holes. The gas gain is found to depend strongly on the rim size. When operated in Ar/CO$_2$ 70:30 gas, the sector with 0.15 mm annulus rims reaches a gain above 10$^4$ while operating in a stable manner with an acceptably low discharge rate. The gain reach under stable operation is found to be considerably lower in the other two sectors. The gas gain shows a characteristic time-dependence as it rises quickly in the first hour of operation and then drops slowly over the next 24 hours and subsequently stabilizes.

physics.ins-det↗

arXiv2024

Advanced LIGO detector performance in the fourth observing run

On May 24th, 2023, the Advanced Laser Interferometer Gravitational-Wave Observatory (LIGO), joined by the Advanced Virgo and KAGRA detectors, began the fourth observing run for a two-year-long dedicated search for gravitational waves. The LIGO Hanford and Livingston detectors have achieved an unprecedented sensitivity to gravitational waves, with an angle-averaged median range to binary neutron star mergers of 152 Mpc and 160 Mpc, and duty cycles of 65.0% and 71.2%, respectively, with a coincident duty cycle of 52.6%. The maximum range achieved by the LIGO Hanford detector is 165 Mpc and the LIGO Livingston detector 177 Mpc, both achieved during the second part of the fourth observing run. For the fourth run, the quantum-limited sensitivity of the detectors was increased significantly due to the higher intracavity power from laser system upgrades and replacement of core optics, and from the addition of a 300 m filter cavity to provide the squeezed light with a frequency-dependent squeezing angle, part of the A+ upgrade program. Altogether, the A+ upgrades led to reduced detector-wide losses for the squeezed vacuum states of light which, alongside the filter cavity, enabled broadband quantum noise reduction of up to 5.2 dB at the Hanford observatory and 6.1 dB at the Livingston observatory. Improvements to sensors and actuators as well as significant controls commissioning increased low frequency sensitivity. This paper details these instrumental upgrades, analyzes the noise sources that limit detector sensitivity, and describes the commissioning challenges of the fourth observing run.

gr-qc↗

arXiv2024

LIGO Detector Characterization in the first half of the fourth Observing run

Progress in gravitational-wave astronomy depends upon having sensitive detectors with good data quality. Since the end of the LIGO-Virgo-KAGRA third Observing run in March 2020, detector-characterization efforts have lead to increased sensitivity of the detectors, swifter validation of gravitational-wave candidates and improved tools used for data-quality products. In this article, we discuss these efforts in detail and their impact on our ability to detect and study gravitational-waves. These include the multiple instrumental investigations that led to reduction in transient noise, along with the work to improve software tools used to examine the detectors data-quality. We end with a brief discussion on the role and requirements of detector characterization as the sensitivity of our detectors further improves in the future Observing runs.

astro-ph.IM↗

arXiv2022

Quality Control of Mass-Produced GEM Detectors for the CMS GE1/1 Muon Upgrade

The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton collisions is expected to exceed $2-3\times10^{34}$~cm$^{-2}$s$^{-1}$ for Run 3 (starting in 2022), and it will be at least $5\times10^{34}$~cm$^{-2}$s$^{-1}$ when the High Luminosity Large Hadron Collider is completed for Run 4. These conditions will affect muon triggering, identification, and measurement, which are critical capabilities of the experiment. To address these challenges, additional muon detectors are being installed in the CMS endcaps, based on Gas Electron Multiplier technology. For this purpose, 161 large triple-Gas Electron Multiplier detectors have been constructed and tested. Installation of these devices began in 2019 with the GE1/1 station and will be followed by two additional stations, GE2/1 and ME0, to be installed in 2023 and 2026, respectively. The assembly and quality control of the GE1/1 detectors were distributed across several production sites around the world. We motivate and discuss the quality control procedures that were developed to standardize the performance of the detectors, and we present the final results of the production. Out of 161 detectors produced, 156 detectors passed all tests, and 144 detectors are now installed in the CMS experiment. The various visual inspections, gas tightness tests, intrinsic noise rate characterizations, and effective gas gain and response uniformity tests allowed the project to achieve this high success rate.

physics.ins-det↗

arXiv2020

Interstrip Capacitances of the Readout Board used in Large Triple-GEM Detectors for the CMS Muon Upgrade

We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequently maximize the signal-to-noise ratio for the detector. We find agreement at the 1.5--4.8% level between the two methods of calculations and on the average at the 17% level between calculations and measurements. A configuration with halved strip lengths and doubled strip widths results in a measured 27--29% reduction over the original configuration while leaving the total number of strips unchanged. We have now adopted this design modification for all eight module types of the GE2/1 detector and will produce the final detector with this new strip design.

physics.ins-det↗

arXiv2020

Importance of interactions for the band structure of the topological Dirac semimetal Na3Bi

We experimentally measure the band dispersions of topological Dirac semimetal Na3Bi using Fourier-transform scanning tunneling spectroscopy to image quasiparticle interference on the (001) surface of molecular-beam epitaxy-grown Na3Bi thin films. We find that the velocities for the lowest-lying conduction and valencebands are 1.6x10^6 m/s and 4.2x10^5 m/s respectively, significantly higher than previous theoreticalpredictions. We compare the experimental band dispersions to the theoretical band structures calculated usingan increasing hierarchy of approximations of self-energy corrections due to interactions: generalized gradientapproximation (GGA), meta-GGA, Heyd-Scuseria-Ernzerhof exchange-correlation functional (HSE06), and GW methods. We find that density functional theory methods generally underestimate the electron velocities. However, we find significantly improved agreement with an increasingly sophisticated description of the exchange and interaction potential, culminating in reasonable agreement with experiments obtained by the GW method. The results indicate that exchange-correlation effects are important in determining the electronicstructure of this Na3Bi, and are likely the origin of the high velocity. The electron velocity is consistent withrecent experiments on ultrathin Na3Bi and also may explain the ultrahigh carrier mobility observed in heavilyelectron-doped Na3Bi.

cond-mat.mtrl-sci↗

arXiv2017

Combining TMD factorization and collinear factorization

We examine some of the complications involved when combining (matching) TMD factorization with collinear factorization to allow accurate predictions over the whole range of measured transverse momentum in a process like Drell-Yan. Then we propose some improved methods for combining the two types of factorization. (This talk is based on work reported in arXiv:1605.00671.)

hep-ph↗

arXiv2016

Kinematics of Current Region Fragmentation in Semi-Inclusive Deeply Inelastic Scattering

Different kinematical regimes of semi-inclusive deeply inelastic scattering (SIDIS) processes correspond to different underlying partonic pictures, and it is important to understand the transition between them. This is particularly the case when there is sensitivity to intrinsic transverse momentum, in which case kinematical details can become especially important. We address the question of how to identify the current fragmentation region --- the kinematical regime where a factorization picture with fragmentation functions is appropriate. We distinguish this from soft and target fragmentation regimes. Our criteria are based on the kinematic regions used in derivations of factorization theorems. We argue that, when hard scales are of order a few GeVs, there is likely significant overlap between different rapidity regions that are normally understood to be distinct. We thus comment on the need to take this into account with more unified descriptions of SIDIS, which should span all rapidities for the produced hadron. Finally, we propose general criteria for estimating the proximity to the current region at large Q.

hep-ph↗

arXiv2016

Relating Transverse Momentum Dependent and Collinear Factorization Theorems in a Generalized Formalism

We construct an improved implementation for combining transverse-momentum-dependent (TMD) factorization and collinear factorization. TMD factorization is suitable for low transverse momentum physics, while collinear factorization is suitable for high transverse momenta and for a cross section integrated over transverse momentum. The result is a modified version of the standard $W+Y$ prescription traditionally used in the Collins-Soper-Sterman (CSS) formalism and related approaches. We further argue that questions regarding the shape and $Q$-dependence of the cross sections at lower $Q$ are largely governed by the matching to the $Y$-term.

hep-ph↗

arXiv2009

Building Large Area CZT Imaging Detectors for a Wide-Field Hard X-ray Telescope - ProtoEXIST1

We have constructed a moderately large area (32 cm2), fine pixel (2.5 mm pixel, 5 mm thick) CZT imaging detector which constitutes the first section of a detector module (256 cm2) developed for a balloon-borne wide-field hard X-ray telescope, ProtoEXIST1. ProtoEXIST1 is a prototype for the High Energy Telescope (HET) in the Energetic X-ray imaging Survey Telescope (EXIST), a next generation space-borne multi-wavelength telescope. We have constructed a large (nearly gapless) detector plane through a modularization scheme by tiling of a large number of 2 cm x 2 cm CZT crystals. Our innovative packaging method is ideal for many applications such as coded-aperture imaging, where a large, continuous detector plane is desirable for the optimal performance. Currently we have been able to achieve an energy resolution of 3.2 keV (FWHM) at 59.6 keV on average, which is exceptional considering the moderate pixel size and the number of detectors in simultaneous operation. We expect to complete two modules (512 cm2) within the next few months as more CZT becomes available. We plan to test the performance of these detectors in a near space environment in a series of high altitude balloon flights, the first of which is scheduled for Fall 2009. These detector modules are the first in a series of progressively more sophisticated detector units and packaging schemes planned for ProtoEXIST2 & 3, which will demonstrate the technology required for the advanced CZT imaging detectors (0.6 mm pixel, 4.5 m2 area) required in EXIST/HET.

astro-ph.IM↗

arXiv2009

MAXIPOL: Data Analysis and Results

We present results from and the analysis of data from MAXIPOL, a balloon-borne experiment designed to measure the polarization in the Cosmic Microwave Background (CMB). MAXIPOL is the first CMB experiment to obtain results using a rotating half-wave plate as a rapid polarization modulator. We report results from observations of a sky area of 8 deg^2 with 10-arcmin resolution, providing information up to l~700. We use a maximum-likelihood method to estimate maps of the Q and U Stokes parameters from the demodulated time streams, and then both Bayesian and frequentist approaches to compute the EE, EB, and BB power spectra. Detailed formalisms of the analyses are given. A variety of tests show no evidence for systematic errors. The Bayesian analysis gives weak evidence for an EE signal. The EE power is 55^{+51}_{-45} μK^2 at the 68% confidence level for l=151-693. Its likelihood function is asymmetric and skewed positive such that with a uniform prior the probability of a positive EE power is 96%. The powers of EB and BB signals at the 68% confidence level are 18^{+27}_{-34} μK^2 and -31^{+31}_{-19} μK^2 respectively and thus consistent with zero. The upper limit of the BB-mode at the 95% confidence level is 9.5 μK. Results from the frequentist approach are in agreement within statistical errors. These results are consistent with the current concordance LCDM model.

astro-ph↗

arXiv2008

JaxoDraw: A graphical user interface for drawing Feynman diagrams. Version 2.0 release notes

A new version of the Feynman graph plotting tool JaxoDraw is presented. Version 2.0 is a fundamental re-write of most of the JaxoDraw core and some functionalities, in particular importing graphs, are not backward-compatible with the 1.x branch. The most prominent new features include: drawing of Bezier curves for all particle modes, on-the-fly update of edited objects, multiple undo/redo functionality, the addition of a plugin infrastructure, and a general improved memory performance. A new LaTeX style file is presented that has been written specifically on top of the original axodraw.sty to meet the needs of this this new version.

hep-ph↗

arXiv2007

Wide Field Hard X-ray Survey Telescope: ProtoEXIST1

We report our progress on the development of pixellated imaging CZT detector arrays for our first-generation balloon-borne wide-field hard X-ray (20 - 600 keV) telescope, ProtoEXIST1. Our ProtoEXIST program is a pathfinder for the High Energy Telescope (HET) on the Energetic X-ray Imaging Survey telescope (EXIST), a proposed implementation of the Black Hole Finder Probe. ProtoEXIST1 consists of four independent coded-aperture telescopes with close-tiled (~0.4 mm gaps) CZT detectors that preserve their 2.5mm pixel pitch. Multiple shielding/field-of-view configurations are planned to identify optimal geometry for the HET in EXIST. The primary technical challenge in ProtoEXIST is the development of large area, close-tiled modules of imaging CZT detectors (1000 cm2 for ProtoEXIST1), with all readout and control systems for the ASIC readout vertically stacked. We describe the overall telescope configuration of ProtoEXIST1 and review the current development status of the CZT detectors, from individual detector crystal units (DCUs) to a full detector module (DM). We have built the first units of each component for the detector plane and have completed a few Rev2 DCUs (2x2 cm2), which are under a series of tests. Bare DCUs (pre-crystal bonding) show high, uniform ASIC yield (~70%) and ~30% reduction in electronics noise compared to the Rev1 equivalent. A Rev1 DCU already achieved ~1.2% FWHM at 662 keV, and preliminary analysis of the initial radiation tests on a Rev2 DCU shows ~ 4 keV FWHM at 60 keV (vs. 4.7 keV for Rev1). We therefore expect about <~1% FWHM at 662 keV with the Rev2 detectors.

astro-ph↗

arXiv2007

HERA and the LHC - A workshop on the implications of HERA for LHC physics: Proceedings - Part B

The HERA electron--proton collider has collected 100 pb$^{-1}$ of data since its start-up in 1992, and recently moved into a high-luminosity operation mode, with upgraded detectors, aiming to increase the total integrated luminosity per experiment to more than 500 pb$^{-1}$. HERA has been a machine of excellence for the study of QCD and the structure of the proton. The Large Hadron Collider (LHC), which will collide protons with a centre-of-mass energy of 14 TeV, will be completed at CERN in 2007. The main mission of the LHC is to discover and study the mechanisms of electroweak symmetry breaking, possibly via the discovery of the Higgs particle, and search for new physics in the TeV energy scale, such as supersymmetry or extra dimensions. Besides these goals, the LHC will also make a substantial number of precision measurements and will offer a new regime to study the strong force via perturbative QCD processes and diffraction. For the full LHC physics programme a good understanding of QCD phenomena and the structure function of the proton is essential. Therefore, in March 2004, a one-year-long workshop started to study the implications of HERA on LHC physics. This included proposing new measurements to be made at HERA, extracting the maximum information from the available data, and developing/improving the theoretical and experimental tools. This report summarizes the results achieved during this workshop.

hep-ph↗

arXiv2006

MAXIPOL: Cosmic Microwave Background Polarimetry Using a Rotating Half-Wave Plate

We discuss MAXIPOL, a bolometric balloon-borne experiment designed to measure the E-mode polarization of the cosmic microwave background radiation (CMB). MAXIPOL is the first bolometric CMB experiment to observe the sky using rapid polarization modulation. To build MAXIPOL, the CMB temperature anisotropy experiment MAXIMA was retrofitted with a rotating half-wave plate and a stationary analyzer. We describe the instrument, the observations, the calibration and the reduction of data collected with twelve polarimeters operating at 140 GHz and with a FWHM beam size of 10 arcmin. We present maps of the Q and U Stokes parameters of an 8 deg^2 region of the sky near the star Beta Ursae Minoris. The power spectra computed from these maps give weak evidence for an EE signal. The maximum-likelihood amplitude of l(l+1)C^{EE}_{l}/(2 pi) is 55_{-45}^{+51} uK^2 (68%), and the likelihood function is asymmetric and skewed positive such that with a uniform prior the probability that the amplitude is positive is 96%. This result is consistent with the expected concordance LCDM amplitude of 14 uK^2. The maximum likelihood amplitudes for l(l+1)C^{BB}_{l}/(2 pi) and $\ell(\ell+1)C^{EB}_{\ell}/2π$ are -31_{-19}^{+31} and 18_{-34}^{+27} uK^2 (68%), respectively, which are consistent with zero. All of the results are for one bin in the range 151 < l < 693. Tests revealed no residual systematic errors in the time or map domain. A comprehensive discussion of the analysis of the data is presented in a companion paper.

astro-ph↗