arXiv subjects

J. Busto

Publications and source records attributed to J. Busto.

At least 19 recordsLinked to original sources

arXiv2026

Constraining gamma-ray burst parameters with the first ultra-high energy neutrino event KM3-230213A

Context: The detection of the highest energy neutrino observed to date by KM3NeT, with an estimated energy of 220 PeV, opens up new possibilities for the study and identification of the astrophysical sources responsible for a diffuse flux of such ultra-high-energy neutrinos, among which gamma-ray bursts are longstanding candidates. Aims: Based on the event KM3-230213A, we derive constraints on the baryon loading and density of the surrounding environment in models of blastwaves in long-duration gamma-ray bursts. Methods: We compute the diffuse flux from gamma-ray burst blastwaves, either expanding in a constant density interstellar medium or developing in a radially decreasing density of a wind-like environment surrounding the gamma-ray burst progenitor star, by taking into account the expected neutrino spectra and luminosity function. We use a Poisson likelihood method to constrain the blastwave model parameters by calculating the expected number of neutrino events within the 90% confidence level energy range of KM3-230213A and by using the joint exposure of KM3NeT/ARCA, IceCube and Pierre Auger. Results: We constrain the baryon loading to be $\leq \{392, 131, 39, 13\}$ at 90% confidence level, which is inversely proportional to a varying interstellar medium particle density of $\{1, 3, 10, 30\}$ cm$^{-3}$. In the wind-like environment case, the baryon loading is $\leq \{20, 50, 100\}$ at 90% confidence level, which is proportional to the sixth power of a varying density parameter of $\{0.05, 0.06, 0.07\}$.

astro-ph.HE↗

arXiv2026

Sensitivity to low-mass WIMPs with an improved liquid argon ionization response model within the DarkSide programme

Dark matter detection experiments using liquid argon rely on a precise characterization of the ionization response to nuclear recoils, especially in the keV energy range relevant for light dark matter interactions. In this work, we present a comprehensive analysis that combines new measurements from the ReD setup, part of the DarkSide experimental program, with calibration data from DarkSide-50, as well as results from the ARIS and SCENE experiments. These combined datasets enable improved constraints on atomic screening effects in the modeling of the ionization response of liquid argon to nuclear recoils. The analysis is performed within the Thomas-Imel recombination framework adopted in previous DarkSide studies, and is here further constrained by the inclusion of ReD data, which allow the screening function to be determined from calibration measurements. By including the updated ionization model into the DarkSide-50 analysis framework, we obtain stronger exclusion limits on low-mass WIMP interactions, setting new world-leading constraints in the 1-3 GeV/c^2 WIMP mass range. Finally, we recast the sensitivity projections for the upcoming DarkSide-20k detector, demonstrating a significantly enhanced discovery potential for low-mass dark matter candidates.

hep-ex↗

arXiv2026

Atmospheric neutrino constraints on Lorentz invariance violation with the first six detection units of KM3NeT/ORCA

Lorentz invariance is a fundamental symmetry underlying both the Standard Model of particle physics and General Relativity. Testing its validity provides a direct means of searching for new physics emerging near the Planck scale. A search for isotropic Lorentz invariance violation with 1.4 years of atmospheric neutrino data collected by a partial configuration of the KM3NeT/ORCA detector comprising six detection units is presented. No evidence for such violation is found; thus, competitive limits are set on a subset of isotropic Lorentz invariance violating coefficients, which complement and extend existing experimental constraints.

hep-ex↗

arXiv2026

Muon tracking in a LiquidO opaque scintillator detector

LiquidO is an innovative radiation detector concept. The core idea is to exploit stochastic light confinement in a highly scattering medium to self-segment the detector volume. In this paper, we demonstrate event-by-event muon tracking in a LiquidO opaque scintillator detector prototype. The detector consists of a 30 mm cubic scintillator volume instrumented with 64 wavelength-shifting fibres arranged in an 8$\times$8 grid with a 3.2 mm pitch and read out by silicon photomultipliers. A wax-based opaque scintillator with a scattering length of approximately 0.5 mm is used. The tracking performance of this LiquidO detector is characterised with cosmic-ray muons and the position resolution is demonstrated to be 450 $μ$m per row of fibres. These results highlight the potential of LiquidO opaque scintillator detectors to achieve fine spatial resolution, enabling precise particle tracking and imaging.

physics.ins-det↗

arXiv2026

Optimizing the potential of KM3NeT in detecting core-collapse supernovae

Core-collapse supernovae mark the end of life of massive stars. However, despite their importance in astrophysics, their underlying mechanisms remain unclear. Neutrinos that emerge from the dense core of the star offer a promising way to study supernova dynamics. A strategy is presented to improve the potential of the KM3NeT neutrino telescope to detect core-collapse supernovae in our Galaxy or the Large Magellanic Cloud by further exploiting the properties of its optical modules equipped with multiple photomultipliers. A supernova burst is expected to produce a sudden hit rate increase in the KM3NeT detectors. New observables have been defined for individual optical modules that exploit the geometry and time distribution of the detected hits, enabling a better discrimination between signal and background signatures. In addition, a thorough investigation of the related systematic uncertainties is presented for the first time. When implemented, this new methodology allowed KM3NeT to probe 46% more Galactic core-collapse supernova candidates than with the previous trigger strategy, reaching the dense Galactic bulge. It is now expected that, once completed, KM3NeT will achieve full Galactic sensitivity to core-collapse supernovae.

astro-ph.HE↗

arXiv2025

Search for an eV-scale sterile neutrino with the first six detection units of KM3NeT/ORCA

The existence of an eV-scale sterile neutrino has been proposed to explain several anomalous experimental results obtained over the course of the past 25 years. The first search for such a sterile neutrino conducted with data from KM3NeT/ORCA -- a water Cherenkov neutrino telescope under construction at the bottom of the Mediterranean Sea -- is reported in this paper. GeV-scale atmospheric neutrino oscillations are measured by reconstructing the energy and arrival direction of up-going neutrinos that have traversed the Earth. This study is based on a data sample containing 5828 neutrino candidates collected with 6 detection units ($5\%$ of the complete detector), corresponding to an exposure of 433 kton-years. From the expected effect of an eV-scale sterile neutrino on the first $ν_μ\rightarrow ν_τ$ standard oscillation maximum, simultaneous constraints are put on the magnitude of the $U_{μ4}$ and $U_{τ4}$ mixing elements assuming $Δm^2_{41} \geq 1$ eV$^2$. The results are compatible with the absence of mixing between active neutrinos and a sterile state, with $|U_{μ4}|^2 < 0.138$ and $|U_{τ4}|^2 < 0.076$ at a $90\%$ confidence level. Such constraints are compatible with the results reported by other long-baseline experiments, and indicate that with KM3NeT/ORCA it is possible to bring crucial contributions to sterile neutrino searches in the coming years.

hep-ex↗

arXiv2025

Deep Learning Framework for Enhanced Neutrino Reconstruction of Single-line Events in the ANTARES Telescope

We present the $N$-fit algorithm designed to improve the reconstruction of neutrino events detected by a single line of the ANTARES underwater telescope, usually associated with low energy neutrino events ($\sim$ 100 GeV). $N$-Fit is a neural network model that relies on deep learning and combines several advanced techniques in machine learning --deep convolutional layers, mixture density output layers, and transfer learning. This framework divides the reconstruction process into two dedicated branches for each neutrino event topology --tracks and showers-- composed of sub-models for spatial estimation --direction and position-- and energy inference, which later on are combined for event classification. Regarding the direction of single-line events, the $N$-Fit algorithm significantly refines the estimation of the zenithal angle, and delivers reliable azimuthal angle predictions that were previously unattainable with traditional $χ^2$-fit methods. Improving on energy estimation of single-line events is a tall order; $N$-Fit benefits from transfer learning to efficiently integrate key characteristics, such as the estimation of the closest distance from the event to the detector. $N$-Fit also takes advantage from transfer learning in event topology classification by freezing convolutional layers of the pretrained branches. Tests on Monte Carlo simulations and data demonstrate a significant reduction in mean and median absolute errors across all reconstructed parameters. The improvements achieved by $N$-Fit highlight its potential for advancing multimessenger astrophysics and enhancing our ability to probe fundamental physics beyond the Standard Model using single-line events from ANTARES data.

physics.comp-ph↗

arXiv2025

Search for steady and flaring neutrino emission from cosmic sources using the complete ANTARES dataset

ANTARES, a neutrino detector located in the depths of the Mediterranean Sea, operated successfully for over 15 years before being decommissioned in 2022. The telescope offered an ideal vantage view of the Southern Sky and benefited from optimal water properties for enhanced angular resolution. This study makes use of data collected over the entire operational period of ANTARES to search for sources of high-energy cosmic neutrinos, considering both steady and flaring emission scenarios. First, a time-integrated search for high-energy neutrino clustering across the celestial sphere is conducted. The most significant accumulation is found at coordinates $(α, δ) =(200.5^\circ\, 17.7^\circ)$ with a post-trial p-value equal to 0.38. A dedicated search in the Galactic Plane is also performed for extended sources, yielding no significant excess. Additionally, a list of potential neutrino sources are investigated. The blazar MG3 J225517+2409 is identified as the most significant object, yet the excess remains compatible with background fluctuations. A mild local excess of 2.4$σ$ is found for the blazar TXS 0506+056. The full sky is also examined for the presence of flaring neutrino emissions. The most significant excess in this case corresponds to a $\sim$4-day flare from the direction $(α, δ) = (141.3^\circ\, 9.8^\circ)$, with a post-trial p-value of 0.30. Finally, the directions of sources highlighted in IceCube's time-dependent searches are investigated. Temporal overlaps between ANTARES and IceCube flares are identified for PKS 1502+106 and TXS 0506+056, with an estimated chance probability of about 0.02%, making this observation particularly noteworthy.

astro-ph.HE↗

arXiv2025

The Online Data Filter for the KM3NeT Neutrino Telescopes

The KM3NeT research infrastructure comprises two neutrino telescopes located in the deep waters of the Mediterranean Sea, namely ORCA and ARCA. KM3NeT/ORCA is designed for the measurement of neutrino properties and KM3NeT/ARCA for the detection of high-energy neutrinos from the cosmos. Neutrinos are indirectly detected using three-dimensional arrays of photo-sensors which detect the Cherenkov light that is produced when relativistic charged particles emerge from a neutrino interaction. The analogue pulses from the photo-sensors are digitised offshore and all digital data are sent to a station on shore where they are processed in real time using a farm of commodity servers and custom software. In this paper, the design and performance of the software that is used to filter the data are presented. The performance of the data filter is evaluated in terms of its efficiency, purity and capacity. The efficiency is measured by the effective volumes of the sensor arrays as a function of the energy of the neutrino. The purity is measured by a comparison of the event rate caused by muons produced by cosmic ray interactions in the Earth's atmosphere with the event rate caused by the background from decays of radioactive elements in the sea water and bioluminescence. The capacity is measured by the minimal number of servers that is needed to sustain the rate of incoming data. The results of these evaluations comply with all specifications. The count rates of all photo-sensors are measured with a sampling frequency of 10 Hz. These data are input to the simulations of the detector response and will also be made available for interdisciplinary research.

astro-ph.IM↗

arXiv2025

Fabrication of thin planar radiopure foils with 82Se for the SuperNEMO Demonstrator

The SuperNEMO Demonstrator, designed to search for double beta decay using enriched 82Se, has been assembled in the Modane Underground Laboratory under the French Alps. Thin foils with radio - purified and enriched 82Se are installed centrally in the detector. A novel foil fabrication method has been developed, improving the radiopurity achieved in the previous generation experiment. It consists of wrapping standalone selenium pads in raw Mylar, combined with selenium purified by a new reverse-chromatography method. This paper describes the features of these foils, their fabrication process, the characterization results, and the integration of the foils into the SuperNEMO Demonstrator.

physics.ins-det↗

arXiv2025

Production, Quality Assurance and Quality Control of the SiPM Tiles for the DarkSide-20k Time Projection Chamber

The DarkSide-20k dark matter direct detection experiment will employ a 21 m^2 silicon photomultiplier (SiPM) array, instrumenting a dual-phase 50 tonnes liquid argon Time Projection Chamber (TPC). SiPMs are arranged into modular photosensors called Tiles, each integrating 24 SiPMs onto a printed circuit board (PCB) that provides signal amplification, power distribution, and a single-ended output for simplified readout. 16 Tiles are further grouped into Photo-Detector Units (PDUs). This paper details the production of the Tiles and the quality assurance and quality control (QA-QC) protocol established to ensure their performance and uniformity. The production and QA-QC of the Tiles are carried out at Nuova Officina Assergi (NOA), an ISO-6 clean room facility at LNGS. This process includes wafer-level cryogenic characterisation, precision flip-chip bonding, wire bonding, and extensive electrical and optical validation of each Tile. The overall production yield exceeds 83.5%, matching the requirements of the DarkSide-20k production plan. These results validate the robustness of the Tile design and its suitability for operation in a cryogenic environment.

physics.ins-det↗

arXiv2025

Flow and thermal modelling of the argon volume in the DarkSide-20k TPC

The DarkSide-20k dark matter experiment, currently under construction at LNGS, features a dual-phase time projection chamber (TPC) with a ~50 t argon target from an underground well. At this scale, it is crucial to optimise the argon flow pattern for efficient target purification and for fast distribution of internal gaseous calibration sources with lifetimes of the order of hours. To this end, we have performed computational fluid dynamics simulations and heat transfer calculations. The residence time distribution shows that the detector is well-mixed on time-scales of the turnover time (~40 d). Notably, simulations show that despite a two-order-of-magnitude difference between the turnover time and the half-life of $^{83\text{m}}$Kr of 1.83 h, source atoms have the highest probability to reach the centre of the TPC 13 min after their injection, allowing for a homogeneous distribution before undergoing radioactive decay. We further analyse the thermal aspects of dual-phase operation and define the requirements for the formation of a stable gas pocket on top of the liquid. We find a best-estimate value for the heat transfer rate at the liquid-gas interface of 62 W with an upper limit of 144 W and a minimum gas pocket inlet temperature of 89 K to avoid condensation on the acrylic anode. This study also informs the placement of liquid inlets and outlets in the TPC. The presented techniques are widely applicable to other large-scale, noble-liquid detectors.

physics.ins-det↗

arXiv2025

Search for Magnetic Monopoles with the Complete ANTARES Dataset

This study presents a novel search for magnetic monopoles using data collected over a 14 year period (2008-2022) by the ANTARES neutrino telescope. The interaction of magnetic monopoles with matter was modeled according to Kazama, Yang, and Goldhaber cross-section. Upper limits on the flux of magnetic monopoles are obtained for velocities both above and below the Cherenkov threshold. No events consistent with the passage of magnetic monopoles were detected, enabling the setting of an upper flux limit for relativistic magnetic monopoles of the order of $10^{-18} \mathrm{cm}^{-2} \mathrm{s}^{-1} \mathrm{sr}^{-1}$.

hep-ex↗

arXiv2025

The ANTARES detector: two decades of neutrino searches in the Mediterranean Sea

Interest for studying cosmic neutrinos using deep-sea detectors has increase after the discovery of a diffuse flux of cosmic neutrinos by the IceCube collaboration and the possibility of wider multi-messenger studies with the observations of gravitational waves. The ANTARES detector was the first neutrino telescope in seawater, operating successfully in the Mediterranean Sea for more than a decade and a half. All challenges related to the operation in the deep sea were accurately addressed by the collaboration. Deployment and connection operations became smoother over time; data taking and constant re-calibration of the detector due to the variable environmental conditions were fully automated. A wealth of results on the subject of astroparticle physics, particle physics and multi-messenger astronomy have been obtained, despite the relative modest size of the detector, paving the way to a new generation of larger undersea detectors. This review summarizes the efforts by the ANTARES collaboration that made the possibility to operate neutrino telescopes in seawater a reality and the results obtained in this endeavor.

hep-ex↗

arXiv2025

COCOA: a compact Compton camera for astrophysical observation of MeV-scale gamma rays

COCOA (COmpact COmpton cAmera) is a next-generation gamma-ray telescope designed for astrophysical observations in the MeV energy range. The detector comprises a scatterer volume employing the LiquidO detection technology and an array of scintillating crystals acting as absorber. Surrounding plastic scintillator panels serve as a veto system for charged particles. The detector's compact, scalable design enables flexible deployment on microsatellites or high-altitude balloons. Gamma rays at MeV energies have not been well explored historically (the so-called "MeV gap") and COCOA has the potential to improve the sensitivity in this energy band.

astro-ph.IM↗

arXiv2025

Study of tau neutrinos and non-unitary neutrino mixing with the first six detection units of KM3NeT/ORCA

Oscillations of atmospheric muon and electron neutrinos produce tau neutrinos with energies in the GeV range, which can be observed by the ORCA detector of the KM3NeT neutrino telescope in the Mediterranean Sea. First measurements with ORCA6, an early subarray corresponding to about 5$\%$ of the final detector, are presented. A sample of 5828 neutrino candidates has been selected from the analysed exposure of 433 kton-years. The $ν_τ$ normalisation, defined as the ratio between the number of observed and expected tau neutrino events, is measured to be $S_τ= 0.48^{+0.5}_{-0.33}$. This translates into a $ν_τ$ charged-current cross section measurement of $σ_τ^{\text{meas}} = (2.5 ^{+2.6}_{-1.8}) \times 10^{-38}$ cm$^{2}$ nucleon$^{-1}$ at the median $ν_τ$ energy of 20.3 GeV. The result is consistent with the measurements of other experiments. In addition, the current limit on the non-unitarity parameter affecting the $τ$-row of the neutrino mixing matrix was improved, with $α_{33}>$ 0.95 at the 95$\%$ confidence level.

hep-ex↗

arXiv2025

gSeaGen code by KM3NeT: an efficient tool to propagate muons simulated with CORSIKA

The KM3NeT Collaboration has tackled a common challenge faced by the astroparticle physics community, namely adapting the experiment-specific simulation software to work with the CORSIKA air shower simulation output. The proposed solution is an extension of the open source code gSeaGen, which allows the transport of muons generated by CORSIKA to a detector of any size at an arbitrary depth. The gSeaGen code was not only extended in terms of functionality but also underwent a thorough redesign of the muon propagation routine, resulting in a more accurate and efficient simulation. This paper presents the capabilities of the new gSeaGen code as well as prospects for further developments.

hep-ex↗

arXiv2025

Quality Assurance and Quality Control of the $26~\text{m}^2$ SiPM production for the DarkSide-20k dark matter experiment

DarkSide-20k is a novel liquid argon dark matter detector currently under construction at the Laboratori Nazionali del Gran Sasso (LNGS) of the Istituto Nazionale di Fisica Nucleare (INFN) that will push the sensitivity for Weakly Interacting Massive Particle (WIMP) detection into the neutrino fog. The core of the apparatus is a dual-phase Time Projection Chamber (TPC), filled with \SI{50} {tonnes} of low radioactivity underground argon (UAr) acting as the WIMP target. NUV-HD-cryo Silicon Photomultipliers (SiPM)s designed by Fondazione Bruno Kessler (FBK) (Trento, Italy) were selected as the photon sensors covering two $10.5~\text{m}^2$ Optical Planes, one at each end of the TPC, and a total of $5~\text{m}^2$ photosensitive surface for the liquid argon veto detectors. This paper describes the Quality Assurance and Quality Control (QA/QC) plan and procedures accompanying the production of FBK~NUV-HD-cryo SiPM wafers manufactured by LFoundry s.r.l. (Avezzano, AQ, Italy). SiPM characteristics are measured at 77~K at the wafer level with a custom-designed probe station. As of March~2025, 1314 of the 1400 production wafers (94% of the total) for DarkSide-20k were tested. The wafer yield is $93.2\pm2.5$\%, which exceeds the 80\% specification defined in the original DarkSide-20k production plan.

physics.ins-det↗