arXiv subjects

Jörg F. Unger

Publications and source records attributed to Jörg F. Unger.

11 recordsLinked to original sources

arXiv2026

Embedding Model-form Uncertainty in Probabilistic Calibration of Digital Twins for Bridges

Digital twins of bridges rely on physics-based models to infer full-field structural responses from sparse monitoring data. The reliability of these predictions depends on the calibration of model parameters while accounting for discrepancies between the model and the physical system. Such discrepancies, commonly referred to as model-form uncertainty (MFU), arise from simplifying assumptions and incomplete representations of physical processes, and can substantially affect predictive reliability. Explicitly quantifying MFU during calibration is therefore essential for trustworthy digital-twin predictions. This work presents a calibration framework that explicitly represents MFU through stochastic parameter embedding. The framework is demonstrated using a simplified two-dimensional cross-sectional thermal model of the Nibelungenbr\"ucke calibrated against temperature measurements from its monitoring system. By explicitly accounting for MFU, the proposed methodology enables computationally efficient models to be reliably employed within digital-twin environments while maintaining predictive credibility. The framework introduces a three-step calibration strategy that progressively addresses sources of discrepancy while maintaining a clear distinction between identified uncertainties. Variance decomposition is used to characterize the structure of predictive uncertainty and its propagation to quantities of interest. Remaining discrepancies between predictive distributions and observations are quantified using Kolmogorov-Smirnov metrics to assess predictive consistency across seasonal conditions. The results demonstrate that explicitly accounting for MFU improves the interpretability and reliability of predictive uncertainties and validate the methodology for calibration of physics-based models supporting digital twins in structural health monitoring.

cs.CE↗

arXiv2026

Buildability Assessment of 3D-Printed Concrete Structures Using Smoothed Mohr-Coulomb Plasticity with Isotropic Hardening

Extrusion-based 3D concrete printing builds structural elements layer upon layer without formwork, so freshly deposited material must carry the growing weight of the structure while it is still gaining strength and stiffness. The largest number of layers that can be printed before failure, the buildability, is therefore central to process design. Its prediction rests above all on how accurately the constitutive model represents fresh concrete. Existing finite element frameworks pair gradual pre-failure hardening only with smooth yield surfaces, which leaves the Mohr-Coulomb surface that best describes fresh concrete restricted to perfect plasticity. This work combines a smoothed Mohr-Coulomb yield surface with nonlinear isotropic hardening of the cohesion, formulated in an updated Lagrangian setting with an activation field for layer deposition. Failure is identified from a tangent-stiffness eigenvalue criterion that matches the analytical self-weight buckling load of a slender wall and is insensitive to geometric imperfection. The framework reproduces the measured collapse of a printed straight wall within one layer and predicts the collapse of a hollow cylinder closer to experiment than existing frameworks. A study over six diameters and six hardening rates shows buildability peaking at intermediate diameters and rising with the hardening rate. Recording how much of its strength the material has used at failure, slender cylinders fail with much still in reserve while intermediate ones use nearly all of it. The two failure modes are therefore identified as the limits of one process rather than separate failure mechanisms.

cs.CE↗

arXiv2026

Influence of Extruded Filament Shape on Buildability in 3D Concrete Printing: A Geometry-Informed Deep Learning-FEM Approach

The geometric morphology of deposited filaments can significantly influence the structural performance and stability of 3D concrete-printed (3DCP) structures. However, most finite element (FEM)-based approaches for buildability assessment represent printed layers as simplified rectangles, potentially limiting predictive accuracy. This study proposes a geometry-informed modelling framework that integrates the deep-learning-based filament shape prediction tool ShapeGen3DCP with a layer-activation FEM approach to investigate the effect of realistic filament geometries on buildability. The framework generates geometry-aware numerical models directly from material and process parameters, eliminating the need for experimental filament characterization or computationally intensive fluid-flow simulations. Validation against experimental data and a parametric study of rectilinear walls demonstrate that extrusion parameters and the resulting filament geometry can significantly influence buildability predictions. Realistic filament representations are particularly important for free-flow deposition, whereas layer-pressing strategies are less sensitive to geometric simplifications. Among the investigated representations, an elliptical approximation provides an effective balance between geometric fidelity and modelling simplicity. When rectangular representations are preferred to enable regular computational meshes for faster simulations, defining their dimensions based on volume conservation improves prediction reliability compared with calibrating them using either the maximum filament width or the interlayer contact width. Overall, the proposed methodology demonstrates the importance of incorporating filament geometry into 3DCP simulations and provides practical guidance for selecting efficient and accurate geometric representations for buildability assessment.

cs.CE↗

arXiv2026

Quantifying water-driven geometric uncertainties in powder bed concrete printing using high-resolution 3D modeling

Dimensional accuracy in powder bed 3D printing of concrete is strongly influenced by binder distribution, and the resulting geometric deviations can be direction-dependent. This study examines how voxel-wise water dosage influences geometric fidelity and deviation anisotropy. Experiments show that small changes in water content can cause large, systematic deviations, including edge rounding and swelling. We quantify these effects using high-resolution stereophotogrammetry, aligning as-built scans with CAD models. We then compute deviation metrics such as point-wise distance errors and volumetric differences across multiple water-dosage settings, revealing repeatable, directionally biased deformation patterns that intensify with higher water content. Mechanical testing indicates that stiffness and strength change only marginally, with no clear trend in the tested range. This is explained by excess voxel water diffusing into surrounding powder, leaving the effective water-cement ratio largely unchanged. Finally, we demonstrate a design-compensation concept that pre-adjusts digital geometry to counter predictable deviations, improving accuracy without post-processing.

cs.CE↗

arXiv2026

Bayesian Tendon Breakage Localization under Model Uncertainty Using Distributed Fiber Optic Sensors

This study develops a Bayesian, uncertainty-aware framework for tendon breakage localization in pre-stressed concrete members using high-resolution data from distributed fiber-optic sensors (DFOS). DFOS enable full-field monitoring of strain changes on the surface of pre-stressed concrete members due to such failure. A finite element model (FEM) of an experimental tendon-breakage test is constructed, and model parameters are calibrated probabilistically against DFOS measurements. To capture model-form uncertainty (MFU), stochastic perturbations are embedded directly into material parameters, enabling the joint inference of physical properties and MFU within a unified probabilistic framework. Gaussian Process surrogates are employed to efficiently emulate the nonlinear FEM response, supporting computationally tractable Bayesian inference. A $\phi$-divergence-based influence analysis identifies the DFOS measurements that most strongly shape the posterior distributions, providing interpretable diagnostics of sensor informativeness and model adequacy. The calibrated parameters and embedded uncertainties are then transferred to a FEM of a full-scale structural configuration, enabling prediction of tendon breakage localization under realistic conditions. A separability analysis of the predictive strain distributions quantifies the identifiability of tendon breakage at varying depths, assessing the confidence with which different damage scenarios can be distinguished given the propagated uncertainties. Results demonstrate that the framework achieves robust parameter calibration, interpretable diagnostics, and uncertainty-informed damage detection, integrating experimental data, embedded MFU, and probabilistic modeling. By systematically propagating both experimental and model uncertainties, the approach supports reliable tendon breakage localization and optimal DFOS placement.

cs.CE↗

arXiv2026

Gaussian mixture models for model improvement

Modeling complex physical systems such as they arise in civil engineering applications requires finding a trade-off between physical fidelity and practicality. Consequently, deviations of simulation from measurements are ubiquitous even after model calibration due to the model discrepancy, which may result from deliberate modeling decisions, ignorance, or lack of knowledge. If the mismatch between simulation and measurements are deemed unacceptable, the model has to be improved. Targeted model improvement is challenging due to a non-local impact of model discrepancies on measurements and the dependence on sensor configurations. Many approaches to model improvement, such as Bayesian calibration with additive mismatch terms, gray-box models, symbolic regression, or stochastic model updating, often lack interpretability, generalizability, physical consistency, or practical applicability. This paper introduces a non-intrusive approach to model discrepancy analysis using mixture models. Instead of directly modifying the model structure, the method maps sensor readings to clusters of physically meaningful parameters, automatically assigning sensor readings to parameter vector clusters. This mapping can reveal systematic discrepancies and model biases, guiding targeted, physics-based refinements by the modeler. The approach is formulated within a Bayesian framework, enabling the identification of parameter clusters and their assignments via the Expectation-Maximization (EM) algorithm. The methodology is demonstrated through numerical experiments, including an illustrative example and a real-world case study of heat transfer in a concrete bridge.

cs.CE↗

arXiv2024

Posterior sampling with Adaptive Gaussian Processes in Bayesian parameter identification

Posterior sampling by Monte Carlo methods provides a more comprehensive solution approach to inverse problems than computing point estimates such as the maximum posterior using optimization methods, at the expense of usually requiring many more evaluations of the forward model. Replacing computationally expensive forward models by fast surrogate models is an attractive option. However, computing the simulated training data for building a sufficiently accurate surrogate model can be computationally expensive in itself, leading to the design of computer experiments problem of finding evaluation points and accuracies such that the highest accuracy is obtained given a fixed computational budget. Here, we consider a fully adaptive greedy approach to this problem. Using Gaussian process regression as surrogate, samples are drawn from the available posterior approximation while designs are incrementally defined by solving a sequence of optimization problems for evaluation accuracy and positions. The selection of training designs is tailored towards representing the posterior to be sampled as good as possible, while the interleaved sampling steps discard old inaccurate samples in favor of new, more accurate ones. Numerical results show a significant reduction of the computational effort compared to just position-adaptive and static designs.

math.NA↗

arXiv2024

Embedded Model Form Uncertainty Quantification with Measurement Noise for Bayesian Model Calibration

A key factor in ensuring the accuracy of computer simulations that model physical systems is the proper calibration of their parameters based on real-world observations or experimental data. Inevitably, uncertainties arise, and Bayesian methods provide a robust framework for quantifying and propagating these uncertainties to model predictions. Nevertheless, Bayesian methods paired with inexact models usually produce predictions unable to represent the observed datapoints. Additionally, the quantified uncertainties of these overconfident models cannot be propagated to other Quantities of Interest (QoIs) reliably. A promising solution involves embedding a model inadequacy term in the inference parameters, allowing the quantified model form uncertainty to influence non-observed QoIs. This paper introduces a more interpretable framework for embedding the model inadequacy compared to existing methods. To overcome the limitations of current approaches, we adapt the existing likelihood models to properly account for noise in the measurements and propose two new formulations designed to address their shortcomings. Moreover, we evaluate the performance of this inadequacy-embedding approach in the presence of discrepancies between measurements and model predictions, including noise and outliers. Particular attention is given to how the uncertainty associated with the model inadequacy term propagates to the QoIs, enabling a more comprehensive statistical analysis of prediction's reliability. Finally, the proposed approach is applied to estimate the uncertainty in the predicted heat flux from a transient thermal simulation using temperature observations.

cs.CE↗

arXiv2023

Model bias identification for Bayesian calibration of stochastic digital twins of bridges

Simulation-based digital twins must provide accurate, robust and reliable digital representations of their physical counterparts. Quantifying the uncertainty in their predictions plays, therefore, a key role in making better-informed decisions that impact the actual system. The update of the simulation model based on data must be then carefully implemented. When applied to complex standing structures such as bridges, discrepancies between the computational model and the real system appear as model bias, which hinders the trustworthiness of the digital twin and increases its uncertainty. Classical Bayesian updating approaches aiming to infer the model parameters often fail at compensating for such model bias, leading to overconfident and unreliable predictions. In this paper, two alternative model bias identification approaches are evaluated in the context of their applicability to digital twins of bridges. A modularized version of Kennedy and O'Hagan's approach and another one based on Orthogonal Gaussian Processes are compared with the classical Bayesian inference framework in a set of representative benchmarks. Additionally, two novel extensions are proposed for such models: the inclusion of noise-aware kernels and the introduction of additional variables not present in the computational model through the bias term. The integration of such approaches in the digital twin corrects the predictions, quantifies their uncertainty, estimates noise from unknown physical sources of error and provides further insight into the system by including additional pre-existing information without modifying the computational model.

cs.CE↗

arXiv2022

Evaluation of tools for describing, reproducing and reusing scientific workflows

In the field of computational science and engineering, workflows often entail the application of various software, for instance, for simulation or pre- and postprocessing. Typically, these components have to be combined in arbitrarily complex workflows to address a specific research question. In order for peer researchers to understand, reproduce and (re)use the findings of a scientific publication, several challenges have to be addressed. For instance, the employed workflow has to be automated and information on all used software must be available for a reproduction of the results. Moreover, the results must be traceable and the workflow documented and readable to allow for external verification and greater trust. In this paper, existing workflow management systems (WfMSs) are discussed regarding their suitability for describing, reproducing and reusing scientific workflows. To this end, a set of general requirements for WfMSswere deduced from user stories that we deem relevant in the domain of computational science and engineering. On the basis of an exemplary workflow implementation, publicly hosted at GitHub (https:// github.com/BAMresearch/NFDI4IngScientificWorkflowRequirements), a selection of different WfMSs is compared with respect to these requirements, to support fellow scientists in identifying the WfMSs that best suit their requirements.

cs.SE↗

arXiv2022

Multiscale modeling of linear elastic heterogeneous structures via localized model order reduction

In this paper, a methodology for fine scale modeling of large scale structures is proposed, which combines the variational multiscale method, domain decomposition and model order reduction. The influence of the fine scale on the coarse scale is modelled by the use of an additive split of the displacement field, addressing applications without a clear scale separation. Local reduced spaces are constructed by solving an oversampling problem with random boundary conditions. Herein, we inform the boundary conditions by a global reduced problem and compare our approach using physically meaningful correlated samples with existing approaches using uncorrelated samples. The local spaces are designed such that the local contribution of each subdomain can be coupled in a conforming way, which also preserves the sparsity pattern of standard finite element assembly procedures. Several numerical experiments show the accuracy and efficiency of the method, as well as its potential to reduce the size of the local spaces and the number of training samples compared to the uncorrelated sampling.

cs.CE↗