arXiv subjects

Ivan Favero

Publications and source records attributed to Ivan Favero.

At least 19 recordsLinked to original sources

arXiv2026

Boosted Optomechanics with a Fluid of Nonlinear Polaritons

Merging optomechanics and polaritonics opens stimulating perspectives like the giant enhancement of optomechanical interaction and the enrichment of optomechanics with effective nonlinear photons. The experimental implementation of these concepts has however remained elusive. Here we report on the resonant optical control of polaritonic optomechanical resonators constituted of semiconductor disks embedding quantum wells. Whispering gallery photons and quantum well excitons strongly couple, leading to the emergence of polaritons that couple to the mechanical vibrations of the disk. We perform resonant optomechanical frequency response experiments on these resonators, modeled introducing a minimal set of constitutive equations, from which we extract the polariton-modified optomechanical coupling $g_0$ and the polariton nonlinearities. We observe a boost of $g_0$ by more than a decade compared to bare photons, reaching to a record $g_0$ for whispering gallery resonators of $22$ MHz, and analyze experimentally and theoretically its evolution as function of the polariton's composition. We also measure a clear hierarchy of three polaritonic nonlinearities, again analyzed as function of polariton composition, establishing a bridge between past unconciliated reports in polaritonics. Grounded on experimental and theoretical foundations, resonant polaritonic optomechanics is set ready for an optomechanical exploration of quantum fluids of polaritons.

quant-ph↗

arXiv2025

Optomechanical disk resonator in the quantum ground state of motion

Although they have enabled several advances in the field of optomechanics, optomechanical disk resonators have not yet been operated in the quantum regime. We present the first experimental demonstration of an optomechanical disk resonator prepared in the quantum ground state. With a gigahertz frequency, the mechanical breathing mode of the investigated semiconductor disk reaches a level of excitation below a single phonon when cooled in a dilution refrigerator. We quantify the phonon occupancy of the mechanical mode by performing Brillouin sideband spectroscopy: a conical optical fiber is evanescently coupled to the disk optical whispering-gallery mode, and Stokes and anti-Stokes photons scattered by phonon emission and absorption are counted on a single-photon detector. We measure a suppression of the absorption process corresponding to a phonon occupancy of $0.66\pm0.20$. We experimentally investigate the mechanisms ruling laser-induced heating, which limits the lowest measurable phonon occupancy, and notably witness an extra-cavity heating effect.

quant-ph↗

arXiv2025

Multiphysics optomechanical sensing of a liquid on the micron scale

We present an optomechanical device platform for characterization of optical, thermal, and rheological properties of fluids on the micron scale. A suspended silicon microdisk resonator with a vibrating mass of 100 fg and an effective measurement volume of less than a pL is used to monitor properties of different fluids at rest. By employing analytical models for thermo-optical effects, thermal diffusion and fluid-structure interactions, our platform determines the refractive index, thermal conductivity, viscosity, density and compressibility of the fluid, in a compact measurement setup. A single measurement takes as short as 70 microseconds, and the employed power can be less than 100 microwatts, guaranteeing measurement at rest and in thermal equilibrium.

physics.app-ph↗

arXiv2024

Multimode optomechanical weighing of a single nanoparticle

We demonstrate multimode optomechanical sensing of individual nanoparticles with radius of a hundred of nanometers. A semiconductor optomechanical disk resonator is optically driven and detected under ambient conditions, as nebulized nanoparticles land on it. Multiple mechanical and optical resonant signals of the disk are tracked simultaneously, providing access to several physical informations about the landing analyte in real-time. Thanks to a fast camera registering the time and position of landing, these signals can be employed to weigh each nanoparticle with precision. Sources of error and deviation are discussed and modeled, indicating a path to evaluate the elasticity of the nanoparticles on top of their mere mass. The device is optimized for future investigation of biological particles in the high megadalton range, such as large viruses.

physics.optics↗

arXiv2023

Efficient optical coupling to gallium arsenide nano-waveguides and resonators with etched conical fibers

We explore new methods for coupling light to on-chip gallium arsenide nanophotonic structures using etched conical optical fibers. With a single-sided conical fiber taper, we demonstrate efficient coupling to an on-chip photonic bus waveguide in a liquid environment. We then show that it is possible to replace such on-chip bus waveguide by two joined conical fibers in order to directly couple light into a target whispering gallery disk resonator. This latter approach proves compliant with demanding environments, such as a vibrating pulse tube cryostat operating at low temperature, and it is demonstrated both in the telecom band and in the near infrared close to 900 nm of wavelength. The versatility, stability, and high coupling efficiency of this method are promising for quantum optics and sensing experiments in constrained environments, where obtaining high signal-to-noise ratio remains a challenge.

physics.optics↗

arXiv2023

Fluid-structure model for disks vibrating at ultra-high frequency in a compressible viscous fluid

Radial mechanical modes of miniature disk-shaped resonators are promising candidates for probing the ultra-high-frequency rheological properties of liquids. However, the lack of an analytical fluid-structure model hinders the inference of liquid properties from the experimental measurement of such radial vibrations. Here we develop analytical models for the case of a disk vibrating in a compressible viscous liquid. Closed-form expressions for the mechanical quality factor and resonant frequency shift upon immersion are obtained, which we compare to the results of numerical modeling for a few significant cases. At frequencies above 1 GHz, our model points out the significance of compressibility effects.

physics.flu-dyn↗

arXiv2023

Whispering gallery quantum well exciton polaritons in an Indium Gallium Arsenide microdisk cavity

Despite appealing high-symmetry properties that enable high quality factor and strong confinement, whispering gallery modes of spherical and circular resonators have been absent from the field of quantum-well exciton polaritons. Here we observe whispering gallery exciton polaritons in a Gallium Arsenide microdisk cavity filled with Indium Gallium Arsenide quantum wells, the testbed materials of polaritonics. Strong coupling is evidenced in photoluminescence and resonant spectroscopy, accessed through concomitant confocal microscopy and near-field optical techniques. Excitonic and optical resonances are tuned by varying temperature and disk radius, revealing Rabi splittings between 5 and 10 meV. A dedicated analytical quantum model for such circular polaritons is developed, which reproduces the measured values. At high power, lasing is observed and accompanied by a blueshift of the emission that points to the regime of polariton lasing.

physics.optics↗

arXiv2022

Enhanced Cavity Optomechanics with Quantum-well Exciton Polaritons

Semiconductor microresonators embedding quantum wells can host tightly confined and mutually interacting excitonic, optical and mechanical modes at once. We theoretically investigate the case where the system operates in the strong exciton-photon coupling regime, while the optical and excitonic resonances are parametrically modulated by the interaction with a mechanical mode. Owing to the large exciton-phonon coupling at play in semiconductors, we predict an enhancement of polariton-phonon interactions by two orders of magnitude with respect to mere optomechanical coupling: a near-unity single-polariton quantum cooperativity is within reach for current semiconductor resonator platforms. We further analyze how polariton nonlinearities affect dynamical back-action, modifying the capability to cool or amplify the mechanical motion.

quant-ph↗

arXiv2022

Optomechanical measurement of single nanodroplet evaporation with millisecond time-resolution

Tracking the evolution of an individual nanodroplet of liquid in real-time remains an outstanding challenge. Here a miniature optomechanical resonator detects a single nanodroplet landing on a surface and measures its subsequent evaporation down to a volume of twenty attoliters. The ultra-high mechanical frequency and sensitivity of the device enable a time resolution below the millisecond, sufficient to resolve the fast evaporation dynamics under ambient conditions. Using the device dual optical and mechanical capability, we determine the evaporation in the first ten milliseconds to occur at constant contact radius with a dynamics ruled by the mere Kelvin effect, producing evaporation despite a saturated surrounding gas. Over the following hundred of milliseconds, the droplet further shrinks while being accompanied by the spreading of an underlying puddle. In the final steady-state after evaporation, an extended thin liquid film is stabilized on the surface. Our optomechanical technique opens the unique possibility of monitoring all these stages in real-time.

physics.flu-dyn↗

arXiv2022

Photonic kernel machine learning for ultrafast spectral analysis

We introduce photonic kernel machines, a scheme for ultrafast spectral analysis of noisy radio-frequency signals from single-shot optical intensity measurements. The approach combines the versatility of machine learning and the speed of photonic hardware to reach unprecedented throughput rates. We theoretically describe some of the key underlying principles, and then numerically illustrate the reached performances on a photonic lattice-based implementation. We apply the technique both to picosecond pulsed radio-frequency signals, on energy-spectral-density estimation and a shape classification task, and to continuous signals, on a frequency tracking task. The presented optical computing scheme is resilient to noise while requiring minimal control on the photonic-lattice parameters, making it readily implementable in realistic state-of-the-art photonic platforms.

physics.optics↗

arXiv2021

Effective bath model for arrays of coupled non-Hermitian nanoresonators

Nanophotonics systems have recently been studied under the perspective of non-Hermitian physics. Given their potential for wavefront control, nonlinear optics and quantum optics, it is crucial to develop predictive tools to assist their design. We present here a simple model relying on the coupling to an effective bath consisting of a continuum of modes to describe systems of coupled resonators, and test it on dielectric nanocylinder chains accessible to experiments. The effective coupling constants, which depend non-trivially on the distance between resonators, are extracted from numerical simulations in the case of just two coupled elements. The model predicts successfully the dispersive and reactive nature of modes for configurations with multiple resonators, as validated by numerical solutions. It can be applied to larger systems, which are hardly solvable with finite-element approaches.

physics.optics↗

arXiv2021

Real-time sensing with multiplexed optomechanical resonators

Nanoelectromechanical resonators have been successfully used for a variety of sensing applications. Their extreme resolution comes from their small size at the cost of low capture area, making the "needle in a haystack" issue acute. This leads to poor instrument sensitivity and long analysis time. Moreover, electrical transductions are limited in frequency, which limits the achievable mechanical bandwidth again limiting throughput. Multiplexing a large number of high-frequency resonators appears as a solution, but this is complex with electrical transductions. We propose here a route to solve these issues, with a multiplexing scheme for very high frequency optomechanical resonators. We demonstrate the simultaneous frequency measurement of three silicon microdisks resonators fabricated through a Very Large Scale Integration process. The readout architecture is simple and does not degrade the sensing resolutions. This paves the way towards the realization of sensors for multi-parametric analysis, extremely low limit of detection and response time.

physics.app-ph↗

arXiv2021

A multiphysics model for high frequency optomechanical sensors optically actuated and detected in the oscillating mode

Optomechanical systems combine extreme sensitivity and bandwidth in the control of mechanical motion, of interest for various applications. Integrated on a chip, actuated and detected all-optically by a single laser, they could disrupt sensing technologies. We introduce here a multiphysics model that describes their operation in the oscillating mode, under sinusoidal modulation of the laser, when both photothermal forces and radiation pressure are present, and when nonlinear absorption occurs in the device. The model is validated by systematic experiments on ultra-high frequency optomechanical disk resonators and leads to a quantitative assessment of the amplitude and phase of the demodulated output signal, which carries the sensing information.

physics.optics↗

arXiv2020

An optomechanical discrete variable quantum teleportation scheme

We propose an experimental protocol to realize discrete variable quantum teleportation using optomechanical devices. The photonic polarization superposition state of a single photon is teleported to a phononic superposition of two micromechanical oscillators by means of photon/phonon entanglement generation and optical Bell state measurement using two-photon interference. Verification of the protocol is performed by coherent state transfer between the mechanical devices and light. Simulations show the feasibility of the proposed scheme at millikelvin temperatures using state-of-the-art gigahertz optomechanical devices.

quant-ph↗

arXiv2020

Optomechanical mass spectrometry

It has been demonstrated in the recent years that nanomechanical mass spectrometry was well suited for the analysis of specific high mass species such as viruses. Still, the exclusive use of one-dimensional devices such as vibrating beams forces a trade-off between analysis time (related to capture area) and mass resolution (inversely proportional to device mass). Such devices also require complex readout schemes to simultaneously monitor multiple resonance modes, in particular when stiffness or shape come into play, which degrades mass resolution. These issues restrict nanomechanical MS to the analysis of species with specific properties. We report here the first demonstration of single-particle mass spectrometry with nano-optomechanical resonators fabricated with a Very Large Scale Integration process. The unique motion sensitivity of optomechanical techniques allows the use of resonators with new topologies. The device introduced here is designed to be impervious to particle position, stiffness or shape, opening the way to the analysis of large aspect ratio biological objects of great significance such as viruses with a tail or fibrils. Compared to top-down beam resonators with electrical read-out and state-of-the-art mass resolution, we show a three-fold improvement in capture area with no resolution degradation, despite the use of a single resonance mode. Short analysis time is in reach thanks to the sensitivity and bandwidth of optomechanical read-out and its compliance with telecom multiplexing techniques.

physics.app-ph↗

arXiv2020

Permanent Directional Heat Currents in Lattices of Optomechanical Resonators

We study the phonon dynamics in lattices of optomechanical resonators where the mutually coupled photonic modes are coherently driven and the mechanical resonators are uncoupled and connected to independent thermal baths. We present a general procedure to obtain the effective Lindblad dynamics of the phononic modes for an arbitrary lattice geometry, where the light modes play the role of an effective reservoir that mediates the phonon nonequilibrium dynamics. We show how to stabilize stationary states exhibiting directional heat currents over arbitrary distance, despite the absence of thermal gradient and of direct coupling between the mechanical resonators.

quant-ph↗

arXiv2018

Optomechanical Resonating Probe for Very High Speed Sensing of Atomic Forces

Atomic force spectroscopy and microscopy (AFM) are invaluable tools to characterize nanostructures and biological systems. Most experiments, including state-of-the-art images of molecular bonds, are achieved by driving probes at their mechanical resonance. This resonance reaches the MHz for the fastest AFM micro-cantilevers, with typical motion amplitude of a few nanometres. Next-generation investigations of molecular scale dynamics, including faster force imaging and higher-resolution spectroscopy of dissipative interactions, require more bandwidth and vibration amplitudes below interatomic distance, for non-perturbative short-range tip-matter interactions. Probe frequency is a key parameter to improve bandwidth while reducing Brownian motion, allowing large signal-to-noise for exquisite resolution. Optomechanical resonators reach motion detection at 10^(-18) m.(Hz)^(-1/2), while coupling light to bulk vibration modes whose frequencies largely surpass those of cantilevers. Here we introduce an optically operated resonating optomechanical atomic force probe of frequency 2 decades above the fastest functional AFM cantilevers while Brownian motion is 4 orders below. Based on a Silicon-On-Insulator technology, the probe demonstrates high-speed sensing of contact and non-contact interactions with sub-picometre driven motion, breaking open current locks for faster and finer atomic force spectroscopy.

physics.ins-det↗

arXiv2018

Topological nanophononic states by band inversion

Nanophononics is essential for the engineering of thermal transport in nanostructured electronic devices, it greatly facilitates the manipulation of mechanical resonators in the quantum regime, and could unveil a new route in quantum communications using phonons as carriers of information. Acoustic phonons also constitute a versatile platform for the study of fundamental wave dynamics, including Bloch oscillations, Wannier Stark ladders and other localization phenomena. Many of the phenomena studied in nanophononics were indeed inspired by their counterparts in optics and electronics. In these fields, the consideration of topological invariants to control wave dynamics has already had a great impact for the generation of robust confined states. Interestingly, the use of topological phases to engineer nanophononic devices remains an unexplored and promising field. Conversely, the use of acoustic phonons could constitute a rich platform to study topological states. Here, we introduce the concept of topological invariants to nanophononics and experimentally implement a nanophononic system supporting a robust topological interface state at 350 GHz. The state is constructed through band inversion, i.e. by concatenating two semiconductor superlattices with inverted spatial mode symmetries. The existence of this state is purely determined by the Zak phases of the constituent superlattices, i.e. that one-dimensional Berry phase. We experimentally evidenced the mode through Raman spectroscopy. The reported robust topological interface states could become part of nanophononic devices requiring resonant structures such as sensors or phonon lasers.

cond-mat.mes-hall↗